lemonjimm

Thanks for your replies - I've since moved on to a Scarlett Solo floor sample - and have disabled my internal soundcard (again).  The UX1 goes back into the drawer where I picked it up a few months ago and said "hmmm, why is THIS here???" - now I know.  In fact, it will be stored under the Behringer USB thing I may need to pull out if/when I need a stereo in (or I may just go for something higher on the Focusrite foodchain.  

My apologies to BigChas32 for the negative feedback - that was a mistake/typo click.  I went with your solution although came to that conclusion myself on the 18th.

If you've been following my posts, you'll see that the Toneport UX1 no longer works correctly with Windows 10, Audacity and Max/Max4Live.  I'm out...Now soliciting suggestions for a better USB vendor than Line 6.  

Not looking for anything fancy - line in/mic in/ASIO - and oh yes, drivers that get updated.  

Thanks!

UX1 is still not working in Max 6 or 7 or with Audacity 2.1.1.  (see my other posts for details).  Line 6 is losing another customer.  

Sound familiar to anyone else?

I posted this under a general Win 10 topic yesterday but the thread went in another direction...so I'll post again in hopes that someone else is seeing this same issue.  To clarify, audio works fine for most default applications and Toneport ASIO works fine in DAWs like Live, Reason & FL Studio.  Other programs - those that need to see drivers other than ASIO - will not be able to use their driver unless the Toneport USB is disconnected.  Please read through the post before offering standard troubleshooting advice - thanks.  

USB 2.0 & 3.0 were also tried. 
 

On 8/7, I posted this on the Audacity forums after trying to get this sorted out with a Cycling '74 tech over email. 

We definitely have a pattern here - I've been looking at this all day. Plug in an ASIO USB soundcard and Audacity does not "see" any MME, WASAPI or DirectSound drivers/devices. Unplug and Audacity comes up.

Windows 10 upgrade (build 10240)
Audacity 2.1.1
Line 6 Toneport UX1 - 4.2.7.4 driver
Realtek High Def Audio on board - 6.0.1.7535 driver (was disabled until today)
My audio cable setup now is the MME on board device feeding into the monitor in on the Toneport (a typical setup)

This also happens for Cycling 74 Max 6 & 7
Max 4 Live in Ableton Live can open devices but can't edit
I believe that MSP (associated with Max) can only run under MME as well, so there appears to be a link. 

Ableton Live 9.2 cannot see MME until USB is unplugged
Reason 7.1.1 & FL Studio 11.1.1 can see everything all the time

BTW the Toneport cannot be controlled by the Windows Audio tray icon (Control Panel applet). You can only change volume with the hardware knob on it.

I've tried 
- writing to Cycling - they said the audio driver loads right before the Max program crashes
- Using just the TonePort (my on board Realtek card has been disabled pre-Win 10 - I only enabled it in BIOS when I saw other users were having these types of results)
- with Max 6, I uninstalled both 64 and 32 bit versions and then reinstalled 32...then reached for Max 6, 32 bit - only works if Toneport is unplugged
- 41 and 48K for both devices
- swapping default device
- toggling the exclusive device checkboxes on both soundcards
- reinstalling all the Line 6 software - suspiciously, their Win10 driver has a date of 2013 on it!

I was subsequently asked on the Audacity forum if Audacity 2.0.3 worked, so I installed it into another folder and it worked...now if I can only get Max and Max4Live to work   Of course, I'd rather use the latest Audacity.

Thanks!

Yesterday I posted a similar problem on the Audacity forums after trying to get this sorted out with a Cycling '74 tech over email. 

We definitely have a pattern here - I've been looking at this all day. Plug in an ASIO USB soundcard and Audacity does not "see" any MME, WASAPI or DirectSound drivers/devices. Unplug and Audacity comes up.

Windows 10 upgrade (build 10240)
Audacity 2.1.1
Line 6 Toneport UX1 - 4.2.7.4 driver
Realtek High Def Audio on board - 6.0.1.7535 driver (was disabled until today)
My audio cable setup now is the MME on board device feeding into the monitor in on the Toneport (a typical setup)

This also happens for Cycling 74 Max 6 & 7
Max 4 Live in Ableton Live can open devices but can't edit
I believe that MSP (associated with Max) can only run under MME as well, so there appears to be a link. 

Ableton Live 9.2 cannot see MME until USB is unplugged
Reason 7.1.1 & FL Studio 11.1.1 can see everything all the time

BTW the Toneport cannot be controlled by the Windows Audio tray icon (Control Panel applet). You can only change volume with the hardware knob on it.

I've tried 
- writing to Cycling - they said the audio driver loads right before the Max program crashes
- Using just the TonePort (my on board Realtek card has been disabled pre-Win 10 - I only enabled it in BIOS when I saw other users were having these types of results)
- with Max 6, I uninstalled both 64 and 32 bit versions and then reinstalled 32...then reached for Max 6, 32 bit - only works if Toneport is unplugged
- 41 and 48K for both devices
- swapping default device
- toggling the exclusive device checkboxes on both soundcards
- reinstalling all the Line 6 software - suspiciously, their Win10 driver has a date of 2013 on it!

I was subsequently asked on the Audacity forum if Audacity 2.0.3 worked, so I installed it into another folder and it worked...now if I can only get Max and Max4Live to work.