Jump to content

rublalup

Members
  • Content Count

    53
  • Joined

  • Last visited

Everything posted by rublalup

  1. Thanks NucleusX! I was more fluent but lost practice on the language. Global reseting? so i install the new firmware and tell monkey that overdrive my patches is correct?
  2. I recorded this with my phone... So what you hear is me pressing the fs and changing to another bank... Is my clean tone but in that moment it didn't reproduce the error
  3. ok... i´ll have rehearsal tomorrow and check if it happens again. In case is what you mean what do i have to do? sell my house? :(
  4. sorry... i couldnt attach it... here´s a link: https://soundcloud.com/rublalup/hd500-problem you can actually SEE the problem here (its just a strummed chord):
  5. i already try using other power outlet... is that what you mean NucleusX?
  6. It happens on all the patches i use (i use just like 7-8 all with reverb and/or delay)
  7. I´ll try to be as clear as possible here with my limited english... please be patient and if you have any input that can help or questions regarding this issue please post your thoughts. My pod is a 2010 unit. A couple of weeks back i started noticing a weird thing on my sound. Its kind of an intermittent sound that cuts the signal. It happens on all the patches but is not always present. Please listen to the audio attached... on the first part (od) you can listen it prety clear... i just strum a chord and the "cuts" you hear are the issue i´m talking about. It has some kind of "rhythm" ... as a delay acting weird*** It happens on headphones or in any amp. It happens in any moment but it goes away and come back... sometimes just stay there, but sometimes goes for a while and then return. Its very weird... I cant make it happen on purpose but it happens everytime i use the pod. I have change energy outlets to see if is some kind of power problem but the thing keep happening. Last night i was playing and I experienced the wild pitch some are talking here on the forum when changing patches... so i dont know if the issues are related or not. This issue is new to me. Notes: ****i´ve been unable to replicate the issue if I turn off any reverb/delay effect after the mixer on the patches i use the most. Dont know if is something related to that. ****i´ve not done the last firmware update but the problem start out of nothing... i´ve change nothing on the pod so why is this thing happening now? ***i´m not 100% sure (i first atribute the problem to my tube amp!!!) but i think that it happens only after the unit its benn ON for 10-15 minutes I´m worried is something of a hardware problem because i´m out of guaranty Anyone has experienced this kind of thing with the reverb/delay (assuming that is the problem) Any help/advice is welcome.
  8. rublalup

    'output' Mode

    i dont need to switch them.... but it would be great if i could send a"studio/direct" signal to PA while sending a combo power amp to my amps fx loop to monitor on stage.
  9. rublalup

    'output' Mode

    this is one thing I think a lot of users will apreciate. Be able to set xlr to direct mode while 1/4 are set compo power amp... or any other. I´ve believe i´ve read that teh hd300 can do this... that makes no sense to me being the hd500 the top of the line.
  10. thanks a lot! I know what you mean: - There will be days when your ears are tired, or your brain or whatever else and they won't sound good to you that day. DON'T PANIC. Come back the very next day and they will sound great. Same thing always happens to me even in my analog tube rig. I've even had what I thought was GREAT tone all saved and ready, only to come back the very next day and turn it on and say "Holy crap! What was I thinking" it sounded so bad. my every other practice nightmare
  11. anyone knows of good starting point patches on customtone for use with the power engine 60? i guess theres a lot of users that have the hd500/pe60 rig and want to know if theres any patches already adjusted for it. thanks
  12. well i hit the trigger on the PE60. In a couple of weeks i would tell you how is it working for me.
  13. Hi everybody. I´ve been using the hd500 connected in the effects return of a full tube Marshall amp. I´ve been able to get decent tones out of it but nothing even close to what I can hear on my headphones. The fact is that the amp is giving me a hard time and I decided to stop wasting money on tech´s and buy something else. My first option is getting a powered loudspeaker (looking some electrovoice on a budget) so i can practice home/with the band and monitor myself on gigs. But I´ve been tempted for a long time on one of those Tech 21 Power Engine... My question are (understanding that i want to reproduce my "headphone" tone the best I can while maintaining a credible guitar tone): 1-wich one could be the best option? 2-Is the powered loudspeaker going to give me a "real" guitar tone? 3-Is the power engine going to be different from what I get out of my marshall power section (bypassing the preamp is the same concept of the power engine)? 4-Wich output mode is usable on the power engine? studio/direct? or I have to think of it as the power stage of any other amp (combo power amp)? pd: trying both is not an option. I live over seas and don't have access to the equipment until i buy it. Thanks for your help.
  14. rublalup

    Hd500x First Gig!

    thanks... i guess this would be a cheaper alternative to the stagesource thing
  15. rublalup

    Hd500x First Gig!

    thanks a lot man. Maybe i´m shooting to high with this EV? what coul be other options? my only request is that it let me do some eq...
  16. rublalup

    Hd500x First Gig!

    thanks for your answer. I´m looking this powered monitor: http://www.musiciansfriend.com/pro-audio/electro-voice-zlx-12p-12-2-way-powered-loudspeaker I guess i just have to plug my pod (via 1/4 or xlr) on it and it will work right? does the pod have the capacity of "driving" this speaker?
  17. rublalup

    Hd500x First Gig!

    sorry for making my question on this forum, but i got a doubt: i plan on running my pod hd direct to pa and use my marshall combo for monitoring purposes. It is possible to send my signal via the xlr to pa on studio/direct and at the same time feed my amps fx loop return on combo power amp mode?
  18. es imposible que tenga mas salida la guitarra sola que el pod. como es el sonido por los auriculares
  19. super important for final shaping. Its a shame that thes pod eq are so Anti-Intuitive
  20. i use it on the end... just to mute my guitar between songs... but i feel it doesn´t matter if i placed it before or after
  21. Has anyone experienced this? I´m really listening a tone change on a dual amp (plexi + plexi-pre) tone that i use for crunch... when i add the vol/pan block to be able of using it the tone it´s effected and change (for bad, even been subtle) is this normal? are my ears playing a trick on me?
  22. rublalup

    4cm Volume Issue

    thanks for that complete response! I´ll try what you suggested. My main doubt is why the hell do I need to be in the crunch channel to use the HD as main pre amp... i mean, i´m not even using the fx loop block. What have to do the channel of the amp with the series fx loop?
  23. rublalup

    4cm Volume Issue

    hello, I´m using the 4cm on the series loop of a marshall JCM600 but when i bypass the pre-amp section (using some of the amp models on the hd500) i only get playable volume with the crunch channel selected... on the clean channel volume is super low and thin. This obviusly doesnt occur when I´m using the pre-amp of my amp... both channels are usable with the effects i need. is this normal? what has to do the channel selected if i´m in the fx loop? I´m missing something here...
×
×
  • Create New...