-
Posts
1,501 -
Joined
-
Last visited
-
Days Won
9
Posts posted by hideout
-
-
So, can someone please explain what's going on with the status of idea submissions? Two of my submissions have been moved to "In Review " and one was moved to "Released" and that one I can't find anymore! What up wid dat?!
-
Graphical representation of the EQ curve.
When editing an EQ block or even the Global EQ, it would be handy to be able to see at a glance what EQ settings are doing to the frequency spectrum.
http://line6.ideascale.com/a/dtd/Graphical-representation-of-the-EQ-curve/810465-23508?submitted=1
-
Have you tried Cherry Picker? http://www.dontcrack.com/freeware/downloads.php/id/764/software/CherryPicker/
-
This is something that would be very usefull.
DI seems to disagree with this and I don't understand why.
-
Ok, having thought that through, I'm even more tempted to get another EON610.
Indeed. The JBL EON610s ROCK!! Love the two that I have.
-
Really nice work, duncann. Love your lead tone and that's saying something as I'm not really a high gain type of player.
-
1
-
-
Well, if you're expecting it to sound like an amp next to you, it won't. It's designed to sound like a properly miked amp in a room - like you would do in the studio. If you're totally addicted to the feel of an amp next to you, then you have to use the amp with the Helix. But that also means that an awful lot of its capabilities will never be used.
I got over the amp thing when all the gigs I played required far more flexibility than any amp could provide.
-
1
-
-
I have some powered speakers and hooked it up to one of them a couple of weeks ago. It didn't sound good to me, but they are cheap speakers (Harbingers). I've considered trading one of them off for an Alto TS or Mackie Thump to test the waters, but I wonder about the experience that I would even have with one of these. I would much rather just spend the money and be done, but I'd have to sell my amp for that purchase. That's my dilemma.
If you've had it set up to play through your amp, you'll have to readjust your patches to make them sound the way you like them on PA speakers. Cheap or expensive.
-
To me, an amp and cab will never let you hear what the Helix is really doing and what it really sounds like. All of its myriad combinations of excellently modeled amps and cabs will be masked by the natural coloration of your amp. I think it keeps you from using the Helix to its full sonic potential. Find someone with a really good set of headphones you can borrow. Better yet, a pair of powered speakers.
-
Great man :-) What are your speakers? Frfr or cab?
Straight to mixer and JBL EON610. Big Fat Sound.
-
1
-
-
In terms of tone and more importantly (to me) feel, only one word comes to mind. IMPRESSIVE!!!
-
Matchless are so amazing... In fact, if this box only had the Matchless models... I might be okay!)
Anyway, that exercise was a big waste of time you could argue... I already know what I like, so I stick with it.
Not everyone does, I realize that, but if you DO know what you gravitate towards, stick with it if you actually have to make music for a real audience. You'll all be happy.
I agree, mostly. I'd have to have the Fenders too. They are really quite good. I've found that I really only ever use around 7-8 patches. It took me quite a while to figure out how to create an A/B footswitchable patch so I've pretty much backed off of editing for a while. When I get back to it, I'm hoping that I'll end up with only four patches.
I know I've whinged quite a bit about how some things are implemented in the UI (and I still feel strongly about it), the sounds are undeniably wonderful.
-
Isn't it just a circuit open/circuit closed type of switching system? I don't think there's an actual "Command" per se.
If you have to original switch, you could pry off the bottom and use a multimeter to see what those foot switches do.
-
Add Splits to the effects block list.
Currently, the only way to create a split is to move an effect block down to initiate Path B. But if you liked the effects chain you've just created the way it was and you just want a second path, you have no choice but to move an effect down to create that second path. Wouldn't it be better if you could just crest a second path simply by inserting a split via the effects block list?
http://line6.ideascale.com/a/dtd/Add-the-Splits-to-the-Effects-Block-List/809596-23508
-
A/B switching system between Path 1 and Path 2 via footswitch.
-
As it stands right now, I think your best bet would be to set up three separate presets with the looper in the same position in each, and have the presets set up for each part. There's not really a way to switch between three inputs, and beyond that running three paths into the looper block would be tricky.
Won't there be a slight interrupt in the loop as you switch patches?
-
-
I think DI might have interpreted your initial question differently. Seems like he thought you were asking how to split path 1 into two paths via splitting path 2 into 2A and 2B. Indeed, if you wanted to have some common effects before you split paths, that would be one to go about it.
Did you have any luck with any of methods I mentioned above?
I did manage to create the patch I wanted, thanks, but it was mostly through trial and error. I now have a patch that uses the Taylor IR for the piezo bridge and a very cool, slightly overdriven lead sound for the magnetic pickups on my guitar.
-
.Are you having trouble doing what you want to do, or are you just pointing out (again) that you don't like the documentation? We get it, and as I suggested earlier you are doing what you can (I hope) via Ideascale to get that improved. Meanwhile, the documentation is what it is. You don't like it. You've made that clear. Repeating it here endlessly is no longer productive.
Are you having a technical issue that we can help you with?
Well, no. Mostly it's that I don't get DI's explanation.
-
hmm... whats the difference, as far as I know the "aux in" is used when you have a guitar with active pickups. and "guitar in" for anything with passive. aside from the levels and maybe a bit more volume is there any other benefit you've found?
Hmm, maybe you're right.
-
I don't. It might be more intuitive, but it's WAY slower in practice. Making a feature easier-to-discover is only an advantage before you discover it; after that, it just slows people down. Believe me, we tested Helix's UI/UX exhaustively. Like... years. I don't have time to explain every UI decision, but trust me when I say there's a reason for *everything,* even if it's not yet obvious.
Page 15 in the Quick Start section (emphasis mine):
Choosing an Output
1. Move the joystick to select an Output block and turn the joystick.
Normally you should select “Multi,†which includes four simultaneous pairs of outputs: 1/4", XLR, Digital, and USB 1/2.
If Path 1 doesn't have enough block locations or DSP to accommodate your tone, it can be routed to Path 2:
2. Select Path 1’s output block and turn the joystick to select Path 2A.
Path 2’s Input block displays an arrow, indicating it is being fed by Path 1.
If Path 2 has two input blocks, you may select either Path 2A or 2B, or even split your signal further to both 2A and 2B. See "2 into 1" for an example.
I'm sorry. I must be completely stupid and/or this is some kind new logic (kinda like new math) but this and how it relates to using a footswitch to switch between Path 1 and Path 2 makes no sense to me. All I see is talk about the paths and their outputs. Please explain to this complete idiot where in this quote does it explain how you tell the footswitch to mute the signal of one path and not the other and vice versa. It's unbelievable to me that you guys actually think this makes sense.
-
Page 15 in the Quick Start section (emphasis mine):
Choosing an Output
1. Move the joystick to select an Output block and turn the joystick.
Normally you should select “Multi,†which includes four simultaneous pairs of outputs: 1/4", XLR, Digital, and USB 1/2.
If Path 1 doesn't have enough block locations or DSP to accommodate your tone, it can be routed to Path 2:
2. Select Path 1’s output block and turn the joystick to select Path 2A.
Path 2’s Input block displays an arrow, indicating it is being fed by Path 1.
If Path 2 has two input blocks, you may select either Path 2A or 2B, or even split your signal further to both 2A and 2B. See "2 into 1" for an example.
My apologies. I should have been clearer. I'd like to be able to route the incoming guitar signal to either Path 1 or Path 2 via foot switch.
-
-
You act as if these things are even covered in the manual, though... They are. It would be one thing if these were truly hidden functions, but I've yet to see anything brought up here that's not covered somewhere in the manual. I actually think it's very easy to find something in the manual. I'm usually writing from my work computer, and when I open the PDF up here in Acrobat (I think the free Reader allows this, too), the bookmarks on the left hand side of the screen have all the headings for everything. It's very easy to see the bookmark for the topic I'm looking for and go right to it. I can usually find what I want in less than 30 seconds.
It's impossible for one writing style to please everyone, I guess, and everyone learns differently. But I still maintain that the Helix is largely intuitive. As I said, I was able to figure out most things on my own, and I don't consider myself smarter than most users or anything like that. It's funny that Apple was brought up earlier. I was going to mention that same thing. I think Apple has always taken the stance that users will figure it out. They do publish instruction online and stuff, but people look at those as a last resort.
It's the way they cover it in the manual that I have issue with so yes, I do not like the way things are represented. Yeah, I eventually figured it out but throughout the entire process, all I could think of was that there absolutely is a better way to explain this and a better way to represent it in the UI. I don't disagree that the Helix is largely intuitive... largely. But come on, let's at least admit that there are issues. This whole thing is a matter of having the time to explore the thing. I don't have a whole lot of time to spare and am usually pretty mentally tired when I get home. I'm thrilled that I was able to create the 7 patches of sounds that I use all the time in about 2 hours. That's astounding!!! Still, there will always be things that need improvement. I still think that the splits should be included in the effects block list.
That said, answer me this. Is there a way to create an A/B split between paths 1 & 2?
IdeaScale submissions
in Helix
Posted
My idea is sort of kind of implemented but in a kludgy, wholly inelegant way. Easy to implement, not so much. My proposal was a simpler, easier to understand method.