rarellano

Bye, fellows. Line 6 don't update the firmware anymore, deciduous SD, without FX loop, no chances to detune guitar, so I sold it. I'm migrating to POD Go connected by 4CM to a Marshall AVT100X. Also, nobody else talk anymore in this group, so I leave it.

It was a loyal partner, I will remember it fondly, but I will not miss it.

Bye.

IDK, volumes, noises, whatever

Do you recommends a POD Go on Marshall AVT100X using 4CM? Thanks in advance.

36 minutes ago, silverhead said:

I have used it. Worked as expected. Any specific questions?

I couldn´t find any video showing the differences between 4CM and 2CM (I just made it up), specifically made with POD Go.

4CM? I wanna know the same. 

On 5/22/2020 at 2:52 PM, voxman55 said:

Just heard a Pod Go demo that used pitch shift for Eb and seemed to sound OK. 

Wow! Have you the link? I couldn't found nothing about.

38 minutes ago, silverhead said:

Same answer as the POD Go you asked about in another thread. Monophonic pitch shifting. 
 

Line 6 does not (yet?) offer polyphonic pitch shifting in a multi-FX device. They may do so in future but at this time the Line 6 product that offers true pitch shifting for guitars is the Variax guitar. Very flexible and customized alternate tuning capability.

So, Spider V MkII, using FBV3, has pitch shifting, even monophonic? Can I shift pitch using FBV3 or I have to create a "detuned" patch? Thanks in advance.

Hi. POD Go has some pedal like Digitech Drop? If I need to play some song in E flat or D standard just pressing a button. Thanks in advance.

By default, SJ has a patch called "Fuzzy" on 5D position of User Bank. If you lost this patch (maybe you edited that patch), you can recover it by:

• Artist Bank
  • Royalush
    • Fuzzy

1. Use CD/MP3 input, because AUX input it's not clean

2. No. And I 'm angry and disappointed because that

3. Read 1st answer. Even possible.

4. You must to create a clean patch. In my case, I created a patch with:

• AMP MODELS 
  • CLEAN
    • red
• DRIVE 0
• BASS, MID and TREBLE on noon
• CHAN VOL to taste
• both FX to OFF
• REVERB 0

No updates but firmware (2.09 the latest).

On 5/17/2019 at 5:49 AM, glennt3 said:

Hi guys, I have been trying to find a list of all preset tones / artist that are on the Spider Jam but can’t open the old link from 2014. Does anyone know where to find a download please. 

 

Spider II-III-Jam Presets

Even using some FBV?

Sorry, I wrote bulllollipop. Try this:

1. Press "DRUMS/SONG" button
2. Press right arrow until SD
3. "Turn Wheel To Browse SD"
4. Look for the record
5. Select your record (right arrow). This will load your record into internal memory
6. When recording loaded, press "SAVE" button
7. Turn the wheel until "SAVE REC MIX AS WAV TO CARD"
8. Press right arrow
9. Now your record must to be in .wav format in the SD card

If you have error, check your SD card. Also, check your email. I sent you a .pdf file that could help you to understand deeply the amp

If you have already saved your recording in .JAM format in the SD card:

- Press "DRUMS/SONG" button

- Turn the wheel until "RECORDINGS"

- Select your record

- Press "SAVE" button

- Turn the wheel until "SAVE REC MIX AS WAV TO CARD"

Done. Now you have your record in .wav format in SD card.

Updated request: https://line6.ideascale.com/a/dtd/Octaver-Whammy-on-Spider-Jam/946577-23508?submitted=1#idea-tab-comments

PLEASE, VOTE IT!

1) The first FX knob has: CHORUS/FLANGE - PHASER - TREMOLO. The second FX knob has: DELAY - TAPE ECHO - SWEEP ECHO. I can't see the Whammy. Or octaver (I'm looking for some effect to play Morello's songs)

2) I have a couple of years my Line 6 gear, so I know what I'm talking about. I'm sure that FBV Shortboard MkII works with Spider Jam, but "FUNCTION 2" button.

3) Check this out: https://line6.com/support/topic/31066-line-6-ideas-ideascale-votes-for-firmware-update/. I already did it some years ago.

2 minutes ago, psarkissian said:

https://line6.com/data/6/0a060b316ac34f0593376d7d7/application/pdf/Spider Jam Advanced Guide - English ( Rev B ).pdf

 

Section 3.1 gets into pitch shifting.

 

Using pedal, emulating a Whammy. I propose (ha!) to Line 6 a firmware update (ha!) to use "FUNCTION 2" button of FBV Shortboard MkII as a way to activate this octaver. Maybe I used that Word: octaver. I'm looking for a way to emulate a Whammy using Spider Jam + FBV Shortboard MkII. Thanks, dude.

It's impossible to have a pitch shifter on Spider Jam, right? Somebody had some successful experience about? Maybe? Please?

Are you sure about 2GB SD card? It's card properly working on Spider Jam? What version of firmware are you flashing?

Sound as a good idea try with a pedal. I have FBV Shortboard MKII and it's awesome, because you can change more parameters than Express.

You definitely need to go online and get a 2GB (or smaller) SD card. And with old format (I don´t remember what).

Yes, Carlos, that file includes Spider Jam also II & III settings and features. For me has been so useful. You're welcome.

Abrazos, amigo.

On 7/26/2018 at 7:31 PM, CarlosBluesman said:

Line6 has the worst pós-selling procedures in the world.

No information about upgrades, no visit to its offices, no good neighbouring politics.

Only good people on the forums.

I would like to invite all my friends to come to visit me in Copacabana Beach on Carnaval in Rio de Janeiro.

Nice to meet you too!

God Bless Us All!

Rock´n´Roll!!!

 

 

I guess the problem with the post sellig procedures is because (in Spider Jam case at least) it's a incredible product... but they need sell newest. Also, Yamaha has some words to say about.

Dude, try to download this file and take a look at it: https://1drv.ms/b/s!AiIl6s5VlinAwROY6EUvof5DgoVY

Update firmware ASAP.