zaphodboy

Yes, but only one footswitch. It's intermittent and a reboot on the POD solves it. It's irritating but not the end of the world...I just don't assign anything crucial to the offending switch.

Having never experienced this with ANY piece of gear I've owned, I can't relate at all. Don't know if that's a failing on my part or not, but I've never once achieved instant tonal nirvana with any combo of guitar(s) and amp, no matter what was in the rig. The day I plug into something new and I'm instantly thrilled, with no need to adjust anything, I suspect I'll drop dead from the shock. ;)

Don't buy a Helix then  :P

I use p.a. mode with full rather than pre amp models with the pod set to 'studio direct' and I'm really pleased with the results. When I first got my L3 I tried electric guitar mode with pre models and to my ears the tones didn't sound quite as full.

I sometimes use backing tracks which have had the guitars digitally removed if I can get hold of the track. When you think you have nailed the tone play along with the tune to see how it sound 'in the mix'. Sometimes a bit of extra tweaking is required to get even closer to the tone. I use this web site

http://www.guitarbackingtrack.com/

Good luck

Is there an option to turn the mute function off when in tuner mode? I seem to remember seeing it. If so you could turn the mute function off. It won't stop the POD going into tuner mode but at least you'll still be heard as a stopgap until you solve the problem.

I seemingly had a problem with one of the footswitches periodically not working. This had been going on for a few weeks but I hadn't done anything about it, when a new FW was released. I reflashed to the new FW and the problem went away. Must have been some sort of software glitch. For once my procrastination worked in my favour!!

I've had my JTV 59 for a couple of years now. I gig with it as my primary guitar every week and I love it. 

I had a similar problem when I replaced my power supply with a 3rd party one.  Switched back to a L6 power unit and all was well.

I have the opposite problem....mine WON'T break. Iv'e dropped it down some stairs (winced every time it a step) and our singer was kind enough to kick a pint of beer all over it during a gig. Wiped it with a beer towel and voila! If truth be told it needed a bit of a dust  ;)

Cool mug dude!.....nice playing too!

When I was 4 or 5 my dad would play his guitar while I sang Cilla Black songs....rock n roll eh? When I was a little older my dad showed me a few chords but I didn't really get into it until I heard The Jam in the late 70's. They were so cool I said to myself "I wanna do that!". I had about six months of lessons which was enough to play most Jam songs (great songs but not that complicated). Once I could play The Jam I thought I was the Dogs B#llocks so stopped my lessons and taught the rest to myself.....that's why I have SO MUCH bad technique!

I mic it. I am having no luck at all with saving my L2M settings. When I try to save the acoustic mode, on recall of the patch, the acoustic mod indicator light will light of a split second and then immediately change to reference /PA. I've been asking for help on this one for a while with no joy.

 

Glad your able to make it work.

I struggled with getting the Stagesource modes to save 'per patch'. I found if you try to save it through HD Edit it doesn't always save but if you save it by hitting save on the POD itself it usually does. It is a bit temperamental though!

Hope that helps.

Although I am very jealous, welcome back anyway  ;)

What Silverhead said! I sometimes run my HD500 through a pair of small, pretty cheap M Audio speakers (cost £99 new) and they sound great and take up hardly any room. Link below

http://www.m-audio.com/products/view/av42#.VZU7k_lViko 

Yes, Workbench HD is a free download. Just make sure you are downloading the correct version for your operating system.

This has been a tough topic forever. Slight patch-to-patch volume (not tone) levels will be a thing of the past for anyone lucky enough to own a Helix when they hit the shelves. Any volume variations between patches will be easily levelled with FEET on the fly while still playing the guitar in seconds. Uber-cool!!

Looks like Rick Nielsen from Cheap Trick.

Now THAT'S a guitar!!

Remember this dude?

cdkane is right, try to create your patches at the volume level you're going to perform at. If that's not possible I have found that when creating patches at low volume levels you almost always add more bass than necessary. I usually write the patch then roll off 15-20% of the bass on the amp model. It leaves the patch lacking punch but once you turn up to gig levels the Fletcher-Munson curve makes up for it as your ears perceive more low frequencies at high volumes.

That's a real shame. Any common faults are generally reported on the forums (like the L2 rattle). I haven't seen any posts complaining of this problem before so I can't imagine it's a common fault. Once it's fixed it should be fine for the life of the unit....if that's any consolation.

I use a James Tyler Variax for my acoustic tones with a Stagesource speaker. The vintage pack itself is well worth the money but I am a bit disappointed with the acoustic amp model. Compared to my regular patch which has no amp model and a little compression it sounded muddy to my ears. To be fair I haven't spent much time tweaking it though.

I have an L3 not a DT but I just voted it up because I think the Dream Rig concept is so innovative it would be a real shame for it to fade into obscurity. Line 6 push the boundaries and should continue to do so.

http://line6.ideascale.com/a/dtd/DT-amp-compatibility-for-Helix/726817-23508?submitted=1

You could try a hard reset. Press and hold the left arrow whilst plugging in the power cable. Other than that try a reflash of the FW.

Good luck!

Yeah, I was gutted! Maybe something stickier like mango juice would do the trick. I'll get that Helix if it kills me!!!

I have a screen grab of HD500 Edit showing my favourite effects settings and keep them in a folder on my desktop. I use the snipping tool in Windows, I'm sure your Mac has a similar function. When I want to build a new patch I refer to these screen grabs. Yes, you have to dial them in manually but it only takes a few seconds per effect.

Works for me.