Portuguese

On 10/28/2020 at 3:25 PM, jeffrev01 said:

This morning I downloaded the latest firmware for my G10 Transmitter (Relay G10 v. 1.06) to see if it would fix a problem that I had been having with it. While using the updater I also saw that there was a new firmware for my amp (V. 2.0.2). After downloading the firmware to the amp it restarted, I had a regular 1/4" instrument cable hooked to my guitar and plugged it into the input jack. A terrible squealing noise started coming out of the amp. I turned down the master volume and pulled the cable out. I plugged it back in and now I get no sound at all from the speaker. I plugged in headphones and no sound there either. Prior to the update I had been using the amp with a standard instrument cable. I checked the cable on another amp and it works fins so my only conclusion can be that the firmware did something to kill the amp. I tried a factory reset but it didn't do anything. I really love using this amp as my office practice amp. I even bought the FBV3 to go with it. Npt sure what to do now to get it to work. Any suggestions would be appreciated.

I have the same problem...

Hi

Id like to know if when i plugg the guitar to ux2 and use Por Farm, if i play in stereo or mono, and if is in mono, how i do to play in stereo.

Thanks

Yes, it is safe to connect.

Thanks!

Yes, but note that some sound patches (assume you are using PodFarm) will alter the sound (with EQ) so much you may not hear any wah effect wiht them.

Thank you for the anser.

Connecting the wah between guitar and Ux2 wont damage in any way the Ux2? Is made to Connect that way?

I mean tunner instead or Gunner

Lol

Hi

Id like to know if its possible to tune a guitar a half step down with spider iv 15w Gunner.

Thanks

Hi

Can i use a wah pedal between the guitarra and Ux2? Is that the correcta way to connect a wah pedal to Ux2?

Thanks

I would plug it into the Guitar Input first.

If it is too hot and you are clipping coming in, then use the Pad input.

 

I have active EMG's and a bass with active pups and have no issues with the regular Guitar Input.

I would plug it into the Guitar Input first.

If it is too hot and you are clipping coming in, then use the Pad input.

 

I have active EMG's and a bass with active pups and have no issues with the regular Guitar Input.

What do you meen by hot? What's the pod input for?

Hi.

I play heavy metal and used to record with Abelton live lite 7. I'm about to buy a new Ux2, bit the new ones only comes with Reason Limited software, and no Riff Works or Abelton.

1) Is Reason Limited abel to record as Abelton?

2) What's the difference between Reason Limited and Reason Adapted?

3) Does Reason Limited allows plugins like Ezdrummer and Isotope Ozone?

Thanks

In Ux2, where shall i plug a guitar with active emgs or a bass with active electrónics?

Thanks