mingyi
-
Posts
20 -
Joined
-
Last visited
Posts posted by mingyi
-
-
On 2/11/2021 at 1:41 AM, brue58ski said:
The issue will be DSP or the lack of DSP. There just isn't enought there to justify this. I don't have an Stomp so I may be wrong but I think you can fake one. You would first need to create a parallel path B. That path can be assigned to a different output. Then turn down the B path's input from the split point. Now put a return block at the beginning of Path B and use the Return input for path B's input. The return block is probably one of the lowest DSP using FX but even if you could create a separate input for path B instead of having to use a Return block, you're still going to run into not having enough DSP.
It actually works! Thanks a lot !
-
On 2/10/2021 at 6:51 PM, DunedinDragon said:
There's really no chance of doing dual path on the stomp since that requires an additional DSP chip. If that's what you want you'd need to upgrade to a full unit LT or Floor or Rack.
Still no chance with HX Stomp XL?
-
Yeah,I wish for that too, and I also wish HX stomp could do dual path like the LT Floor do, but they are way too big and heavy,and I don't need that much switch
-
On 2/10/2021 at 6:51 PM, DunedinDragon said:
There's really no chance of doing dual path on the stomp since that requires an additional DSP chip. If that's what you want you'd need to upgrade to a full unit LT or Floor or Rack.
Sorry to hear that,full unit are way too big and heavy,and I don't need that much switch,but thanks
-
I wish HX stomp could do dual path too, unfortunately I could't open ideacscale page
-
I wish HX stomp could do dual path too, unfortunately I could't open ideacscale page
-
6 blocks for each path ,or 6 blocks total?
- 1
-
Sorry for my poor English
Helix has so many physical inputs and outs,but its routing options are far too limited, unlike other professional audio interfaces which can basically route any input to any output 。Now if I want to use helix to play programmed samples or to create a monitor mix to feed my IEM,it is impossible to do that without taking up a processing path(but we have two guitarists each take up a path ),and the routing would change if you switch presets。I wish helix could come up with a dedicate routing mixer section,routing statues can be global regardless of preset change,so we can take full advantage of these physical inputs and outs。This functionality would allow us to ditch our audio interfaces and really simplify our live rigs!
I also put this in ideascale
-
-
I wish this feature would be available in next version
-
a template for FBV3 (and FBV2 express mk2)+1
-
Is it possible to automate presets change in helix native?How?
Is it possible using midi control pedal to change presets in helix native?
-
How to use FBV to change presets in helix native? thanksï¼
-
-
I'd like to know the input impedance of return 1&2
-
Can anyone who own a variax standard tell me its E-E String spacing at bridge? Thanks!
Also, I assume the scale length is 25.5 inch, right ?
-
Native 3.10 in Studio One 5.2 - how to get MIDI into Native
in Helix Native
Posted
How to get Native to change its internal presets in cubase? I tried midi cc# 69 to change snapshots , it worked, but could not able to use program change to change presets