conens
-
Posts
6 -
Joined
-
Last visited
Posts posted by conens
-
-
OK, like chiolas in the link above, given by Guru, my pedal finally calibrated from 0 at the heel to 255 at the toe....the only thing I did differently than before is tap the C switch once more before slowly bringing the pedal back to the heel position. Crazy, but it registered 0 as I went the full throw several times to make sure it was done. I saved it with the D switch, a P appeared, I powered the unit off and on, and all seems to be in order.
Thank you all for your comments.
Ian Cone
-
That would void my warranty. I am still trying procedures from the link posted above. The controller suggestion doesn't do anything at all, but turns itself off after moving the vol. pedal.
-
Yes, exactly, point by point several times. Heel goes no further than 26, toe goes all the way to 255.
-
Hello;
Went thru calibration procedure several times on my newly purchased HD500x. Toe is correct every time, but heel will not set to 0. It sets to 26 every time I have tried to calibrate it.
Has anyone had this problem? Have you been able to get it corrected?
Thank you
-
My helix volume pedal is set to global. When I use it, it is silent from 0 to about 25% of the throw, and sound comes on very abruptly. This doesn't mesh with my playing style. My other L6 volume pedals always worked from 0 to 100% flawlessly and very smoothly. I have looked thru the manual and online and in this forum without finding a solution. Any help would be appreciated.
Conens
Qualified X3 live tech needed
in POD X3
Posted
Does anyone know of a qualified X3 LIve tech, that is reasonable, and knows the unit?
TYIA
conens