-
Posts
40 -
Joined
-
Last visited
Posts posted by massimosevero
-
-
I had the same issue of Inerzia....my helix won't start...tried every combination but crashed....now I have the image of helix and helix rack ( I have the floor effect)
- 2
-
hello, Big problem with latest 2.0 firmware upload, my helix crashed and now don't start correctly..
it's not my first update so I think I didn't make mistakes...
there is a way to downgrade or restore the firmware?
thanks
-
-
I wrote the manual, the output page is different in helix...I think I have to test it in a shop
-
I understand.., but I hear no tone suck with the hd too...it's more like a different sound, not better or worse..just different. .because the direct out modify slighly the tone...( with my m9 doesn't happens, I know is a different gear but still digital)
I don't know the out parameters of helix, if are like 500 it's a missed opportunity for line6..or maybe I'm the only one that hear that difference
-
I'm a hd 500 owner, ( thinking about an helix upgrade) , my disappoiment with the hd is that when I want to use it as a effect unit with the amp the signal is colored, with every output setting.
is the same with helix? it would be nice to have a neutral signal when the amp sim is off...is not about true bypass..
hope I've been clear...
-
The only problem is the program change fixed..it would be nice to make this disable...cause it interferes with midi messages
-
Done, nothing is changed :-(
-
Hi, I have a big problem with midi out, don't know if anyone else had the same problem.
I observed that pod hd send a progr change fixed with every switch ( bank 1 A PrCh !, bank 1 B PrCh 2..etc)
it's a problem cause it interferes with the midi data...I'm trying to set up the pod with a glab looper and a randall rm 100...
no way now!!!!! ( until december everythin was finewith the randall, don't know why now it doesn't control the head)
sorry for my english..
-
one more thing, when I send the midi data with cubase to the head or to the looper switch everything works fine
-
The cc is right...I realized that at every switch is assigned a program change, so, bank 1 A is program change 1, Bank 2 B is PrCh 2 etc....maybe this influences all the midi data...it's a new problem, everything was fine before.
-
Hello, I have a problem with program change sending message with my hd 500.
I want to control my glab midi looper and my randall head.
I want to change the program with one push, Not to assign the program change to F5 or F6, but together with the bank change of the pod...
I was able to change the channel of my randall rm100, but now I cannot do it....(the midi of the head works)
Sorry for my english...
-
Hello, I have a problem with my fuzz factory in the loop fx.
When I use it before the pod no problem, if I use it in the loop there is a loud noise and the sound is terrible.
i use other od/dist in the loop without any problem...so I think is the FF that is incompatible with the loop....anyone had the same problem? Thanks
HELIX CRASHED
in Helix
Posted
Tried everything..not working