Search the Community
Showing results for tags '4 cable method'.
Found 28 results
It's clear that currently it's not possible to use dsp part and the speakers part of amplifi seperately. You can easely put any stompbox before amplifi but you can not use anything between or after amplifi while using it's speakers, except you may use headphones out and might use that signal to feed and stomps and monitor it through another speaker system. So, if there is not any resteiction by hardware, it would be a practical solution to give an option to send the signal from amplifi's dsp to line-out without monitoring that signal through amplifi's speakers. So that amplifi only monitors signal from aux-in. That way, we can use loopers and other effects, probably using something between for different impedance issue. http://line6.ideascale.com/a/dtd/4CM-for-Amplifi/637650-23508
Hello, I have been reading several posts and found no answer for my problems. First of all, IÂ´m connecting the unit the normal way for a 4 cable method connection. Apart from the fx loop volumes, what should be the position of the bypass know on the amp menu? I have turned it off. Should this knob be all the way up? Should it be at 50%? On the chassis, the AMP / LINE button. If turned to line, the amount of volume is absurd, specially if the bypass knob is cranked up. Should I turn the bypass all the way up and have the chassis option on the AMP? Should the fx go into the amp as a line signal or amp signal? Thank you so much for your time. Regards, Ricardo
Guys: I am using the 4 cable method to connect my POD HD500 to a Blackstar HT60 Stage amp. I am still fighting to get a good tone. Anyway, I need to connect my Wah (Morley Dragon 2) pedal, Tech 21 British and Suhr Riot pedals in the chain. I understand there are two options: 1) Connect the guitar >> wah, than Tech 21/Suhr pedals >> POD HD500 Guitar In 2) Connect the guitar >> POD HD500 Guitar in and POD HD500 FX Send >> Wah, Tech 21/Suhr pedals >> Amp Input. Sound is different. I like most the sound of Tech 21 / Suhr by method "1". However, the wah has no effect in both methods. Please, let me know what is the best way of connecting external pedals in the chain when using 4 Cable Method and POD HD500. Att, Emerson.