Search the Community
Showing results for tags '500x'.
-
Hi guys! I just disconnected my POD 500X from my computer as the latency was unbearable. I think I'll try connecting my KRK 6's directly into it instead, but I noticed that the outputs on the POD are balanced whereas the inputs on the monitors are balanced for both XLR and TRS. Will this be a problem ? I've read somewhere that when monitoring from the balanced outputs on the POD, the volume gets really low unless you connect to an amp, but when using unbalanced directly it's quite allright for practising...? Just wondering what kinda cables I should head out to buy on monday - cheers for any advice :) -Thomas
-
Friends, Just got my HD500X and am very pleased with its versatility and sound. I'm trying to emulate patches from another piece of gear but am confused on some of the settings. The old gear has a Multi-tap delay. Was hoping that multi-head delay could do the same thing. I'm looking to set taps or "heads" to the following intervals: 200ms, 400ms, 600 ms, and 1000ms, but I could not find individual timing settings in the 500X. Is there a way to achieve this? Also, I wanted to set the parametric EQ to match: 6300 hz Q 2.0 Gain +6 How might I approximate that specific setting? Thanks for any help you can provide. SR
-
-
Hi i need opinions of this PA Alto SXM112A, for the pod hd 500, is worth or not? i play in church trough mixers and line array systems so for monitoring i use a small acoustic amp, sounds good but not have the same tone of the line array. So i need opinions somebody?
-
Ok, I hope this is just a tiny bug and not symptomatic of something a little bigger. I have noticed that when I adjust an amp's volume via the HD edit software (say loweing an AC-30 from 75% to 40%), it is reflected immediately in the unit (over all volume is lower). I then send the selected patch to the pod to save it. If I go to another patch and then back to the original - the pod has lost the new amp volume. HD edit says the level is the same as what was saved (40%), but it is much louder (sounds like 75%). If I adjust the volume on the pod and save it on the pod - all is good. I suspect there is nothing to do but hope it gets ironed out in the next update (which might be when??) Thanks -Paul
-
I purchased a new HD500X and It's not sounding very good. I have hooked it up to my Laney GH50L head via 4 cable method, change the Pods output through power stack, direct, and combo stack with no luck...it all sounds extreamly fake. Strangly the best setting is the studio direct ( cant remember exact name). What do I set my FX loop volume knob on back of my amp? I tried adjusting FX loop levels on POD I have my switches set to line Thanks, Jeff
-
On the POD HD500, you *must* reset the global setup options which includes resetting the Setlist names and pedal calibration by: 1. Disconnecting the USB cable connection between HD500 and host computer. 2. Power off the POD HD500. 3. Power on the POD HD500 while holding the LEFT ARROW (button while plugging in the power supply to the POD. If you do not do this, one of the tell-tale symptoms that may surface after a Monkey Flash Memory update is that the HD500 will be stuck in a continuous re-boot/power cycling state (you'll keep seeing the Logo and the unit keeps re-starting itself). Sometimes this may not occur, but a secondary telltale sign that a user has not performed a Global Settings reset is the USB communication between the HD500 and HD500 Edit software will be extremely slow/sluggish. ***PLEASE NOTE: Please also make sure to re-calibrate the onboard expression pedal of the HD500 after performing the Global Settings reset. Instructions: How to calibrate the POD HD500 Expression Pedal. -
[Video Tutorial] POD HD500X/HD500 Foot Switch Assignment
Line6Tony posted a article in POD HD Family
