Search the Community
Showing results for tags 'alternate'.
Found 4 results
shruiken Shuriken Alt Tuning Strings reversed...So I'd like to think im not completely stupid, however I got my Shuriken today. charged the battery, finally got to plug it in and it sounds great....while in stand tuning I noticed that when I change either the model knob and selector switch or tuning knobs to something that isn't Standard it sounds terrible. Ok, I thought maybe it just needs some adjustments. Set up work bench, plugged it in and try to play around with the settings/tunings. First thing I notice if if drop the low E to D and play it, no change, however if I play high E there is a change.....? It seems that all of the strings are in reverse, confirmed by changing the A string and the B changes not A.... I've logged a support ticket for this but is there something im missing here a setting I've inadvertently set? All the standard tuning set ups play perfect its just the alternate tunings are completely out of whack. Attach a soundfile and pictures of the tunings in work bench before and after Test.m4a
Alternating between dual amps
giroux0518 posted a topic in POD HDHere is what I am looking for... I'd like to run two amps (one for clean tone, one for dirty tone w/ possible tube screamer), and be able to alternate between the two. Initially, I was thinking of running dual signal path for this, and then setting everything to the same switch (pressing the switch turns on dirty amp mod and tube screamer, and turns off clean amp and vice-versa), but I would need the unused path to be muted. I would assume the other way to do it (in the same patch) would be to run the amps in series. I am running a mono output, so I don't need stereo signals. I'd rather not have to set a different patch (in each block of 4) for each different tone in a song. And I would also be concerned about the delay between switching (the firehawk was a nightmare with this, I didn't keep it long...). I'm new to the PODHD world, and I've only been able to spend a few hours with the HD500x thus far. If anyone can give me good insight into how to set this up, I'd appreciate it. For a little more info, I'll be leaning towards the higher gain amps for my dirty tone (Fireball, Elektrik, etc.), and so far I'm liking the blackface for my cleans. My amp rig is a 6505 on an 212 orange cab with vintage 30s. I love my dirty tone from the amp, but I'm currently just using it as a power-amp to see what the HD can do. I find running it into the effect return on the head sounds much better than the instrument line in on the front.
Variax Shuriken Custom User Presets
Guest posted a article in JTV / Shuriken / Variax Standard / Workbench HDThe Shuriken is unique in many ways from other Variax guitars, one of the ways is the 4 Artist's programmed user presets on the model knob. If you want to replicate the artist's setup you will have to tune the low E string down to D, which will make the custom tunings sound correctly in the USER and SHURIKEN banks. None of the other banks contain tuning offsets and assume that the guitar is tuned to standard E. If you want to load the presets with their respective custom tunings, make sure to set the Alternate Tuning Knob to the MODEL 7 position. If all that is a bit too much ninja for you, feel free to keep the guitar in standard E and set the Alternate Tuning Knob to STANDARD or any of the other tuning presets. Note: If you perform a factory reset of the Shuriken, it will default to the standard JTV model pack. To re install the unique Shuriken pack, download it from here: http://line6.com/data/6/0a020a3d63a058e7eb2d0d632/file/zip/varaix-shuriken-bundle.zip All custom tunings saved with these presets require the low E string tuned down a whole step to D, and that the Alternate Tuning Knob is set to MODEL. USER I Position 1: Post Mortem Spank Spank guitar body with Spank pickups and drop D tuning (sounds D A D G B E) - Note that the two lowest strings are muted. Position 2: 8 Collateral Neutral body with JTV89 pickups and very special custom tuning (sounds D A A A A A) - Note that low E and A strings are tuned down one octave. Position 3: 7 Collateral Neutral body with Lester pickups and another very special custom tuning (sounds A E E E E E) - Note that the physical "A" string (tuned to E) is muted. Position 4: Collateral Aco Acoustic J body with DADGAD tuning (sounds D A D G A D). Position 5: Collateral Spank Spank body with Spank pickups and DADGAD tuning (sounds D A D G A D). USER II Position 1: Octave Standard Neutral body with JTV89 pickups and standard tuning down one octave (sounds E A D G B E). Position 2: B Standard Neutral body with Lester pickups and everything tuned down a fourth (sounds B E A D F# B ). Position 3: Standard Neutral body with Lester pickups and standard tuning (sounds E A D G B E). Position 4: Acoustic Standard Acoustic D body with standard tuning (sounds E A D G B E). Position 5: Spank Standard Spank body with Spank pickups and standard tuning (sounds E A D G B E). USER III Position 1: Tumbi Lesterâ€™s Banjo with a custom tuning (sounds D A D G B A). Note that all strings except the high A are muted. Position 2: 7 Sick Riff Neutral body with Lester pickups and a custom tuning (sounds A E A E F# B ) Position 3: Invincible Aco Acoustic D body with a drop D tuning (sounds D A D G B E). Note that the two lowest strings are muted. Position 4: Invincible Chorus Special Bird body with Lester pickups and a custom tuning (sounds E B E B B E) - Note that the "D", "G", and "B" strings are set to 20% of normal volume, high E string set to 90% of normal volume. Position 5: Invincible G Neutral body with JTV89 pickups and a custom tuning (sounds G D F# A A A). USER IV Position 1: Acoustic DADGAD Acoustic D body with a DADGAD tuning (sounds D A D G A D). Position 2: Acoustic Drop D Acoustic D body with a drop D tuning (sounds D A D G B E). Position 3: Drop D Octave Neutral body with JTV 89 pickups and a drop D tuning one octave lower (sounds D A D G B E) - Note that all strings except the lowest "D" string are tuned down one octave. Position 4: Drop A Neutral body with Lester pickups and a drop A tuning (sounds A E A D F# B ) Position 5: Drop D Neutral body with Lester pickups and a drop D tuning (sounds D A D G B E)
Variax Usage and Tuning FAQs
Line6Tony posted a article in 1st Gen Variax Guitars / Bass / WorkbenchQ: I am getting strange noises when I use my Variax. What can I do? - Piezo pickups can be susceptible to Radio Frequencies and Electro-Magnetic Frequencies. Keep cell phones, radios, and computer gear as far away as possible. - Use the highest quality cables you can afford. Be sure to use a high-quality shielded TRS (tip-ring-sleeve) cable if you are using the Line 6 XPS. - Make sure the jack on the instrument is tight and the ribbon cable is seated at the coffin assembly and the jack correctly. - Experiment with lowering the gain on the presets you are using, or using the noise gate when available. - Turn your volume knob off when you are not playing (even during stops in a song when possible). - Experiment with distance and position between your guitar and sound source (amplifier and/or computer speakers). - Avoid florescent lighting when possible. - Make sure that your rig is plugged into the same power source as the rest of your gear/band/PA system (to avoid ground loops). Q: Can I use altered tuning with the 12-string models? A: The processor on the Variax cannot provide 12-string emulation in addition to altered tunings. Although a 12-string modeled guitar can be "altered", once the model is altered the 12 string modeling will revert to 6 string modeling. Line 6 does not reccomend using 12-string models for altered tunings. Attached is a Word document containing advice and tips on alternate tunings with your Variax for downloading purposes. They are also included in the body of this FAQ. You can also visit our website and read some helpful How-to Articles about alternate tuning tips. *Four Variax Alternate Tuning Tips* With the development of Variax Workbench software, you can now tune your Variax electric to any alternate tuning you like. The Variax Acoustic 700 has this feature built into the guitar itself. With the physical Variax tuned to standard pitch, however, the Variax DSP must create the alternate tunings in real time, note by note as you play. This is no easy task, and as with any developing technology, there are limitations. To get the best musical experience from your alt-tuned Variax, please check out the following four Alternate Tuning Tips. They address the most frequently asked questions of Variax owners. 1. Guitar Volume Balance: If you hear the standard tuning of your physical Variax along with the alt-tuning, your ears may be fooled into thinking the alt-tuning is out of tune. This is especially true for Acoustic 700 owners, but the solution is easy. In a studio situation, turn up your headphones; in a live situation, turn up the volume of your alt-tuned guitar amp or stage monitor so that it drowns out the physical guitar sound. When you adjust your guitar volume balance so that all you hear is the alt-tuned guitar, your alt-tuning will sound the way you expect it to. 2. Odd-Sounding Notes: If you use pull-offs, especially on an open G string that's tuned down a full step or more, or if you use Capo mode and tune several frets up or down and play harmonics or hammer-ons, you may sometimes hear odd-sounding notes. The general cure for this is to adjust your playing technique so that you play very cleanly when doing pull-offs, play with a lighter touch on extremely alt-tuned notes and harmonics, fret your notes accurately, and avoid any problem zones that may produce odd sounds. It's not difficult to get clean-sounding alt-tuning tracks. It just takes a little time to adapt to the particular alt-tuning you're using, then avoid any obvious problem spots you may encounter by adjusting your playing technique and choice of notes. 3. Ringing Overtones: When you play certain notes and you don't mute your other strings, occasionally a note you're playing may cause a harmonic to resonate from a non-muted string. This can be a good thing, but sometimes it may result in an odd sound as in #2 above. The solution is to mute the strings you aren't using, especially when playing single notes. This way the DSP won't be 'confused' by unwanted notes resonating against the intended note. 4. Amp Sounds: For Variax Acoustic Models, use an Amp Bypass setting or go direct whenever possible. Acoustics, Resos, Sitar, etc. don't like preamp gain, so cleaner is better in order to bring out the full range of these Models. If you use a Vetta II or PODxt Live, it's a good idea to set up an Amp Preset for each of your favorite alt-tuned Variax Models, and save the Variax Model with your Amp Preset. If you are experiencing an output latency when in an Alternate Tuning this is a known issue. This is a result of the time it takes for the DSP in the Variax to detect the pitch, change it to a different pitch, and then output the note. This may require you to change your playing style slightly in order to compensate for the latency.