Jump to content

Search the Community

Showing results for tags 'amp'.



More search options

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Forums

  • Community Support
    • Multi-Effects Units
    • Variax Instruments
    • Amplifiers
    • Computer Based Recording
    • Live Sound
    • Pedals/Controllers
    • Dream Rig - Line 6 Product Integration
  • General Discussion
    • Share your Settings
    • Line 6 Lounge

Categories

  • General FAQ
  • Tutorial Videos
  • Effects/Controllers
    • HELIX/HX
    • Firehawk
    • FBV Controllers (MKI / MKII/ 3)
    • M5 / M9 / M13
    • JM4 Looper
    • Stompbox Modelers / ToneCore
    • ToneCore Development Kit
  • Recording
    • Helix Native
    • Echo Farm/Amp Farm
    • POD Farm / POD Studio / TonePort
    • Computer Audio Set Up and Troubleshooting
    • Riffworks Line 6 / Standard Edition
  • POD
    • POD Go
    • POD HD Family
    • POD HD500/HD500X
    • POD HD300/400
    • POD X3 Family
    • POD 2.0 / PODxt Family / Pocket POD / FloorPODs
  • AMPLIFi Series Products
    • AMPLIFi 30/75/150/TT
    • AMPLIFi FX100
    • Videos
    • Tone Creation
  • Amplifiers
    • Spider V
    • Powercab
    • Firehawk 1500
    • DT50/DT25
    • Spider IV/Spider Online
    • Spider Valve
    • Spider Jam
    • Vetta
  • Live Sound
    • Relay/XD-V Digital Wireless
    • StageScape M20d Mixer
    • StageSource Speaker
  • Guitars
    • JTV / Shuriken / Variax Standard / Workbench HD
    • 1st Gen Variax Guitars / Bass / Workbench
  • Mobile Products
    • Sonic Port devices / Mobile In
    • Mobile Keys
    • MIDI Mobilizer
    • Mobile POD app
  • Dream Rig
  • Legacy Products
    • Amps
    • POD
    • Effects and Controllers
    • GearBox
    • Line 6 X2 Digital Wireless

Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Joined

  • Start

    End


Group


AIM


MSN


Website URL


ICQ


Yahoo


Jabber


Skype


Location


Interests


Registered Products

Found 154 results

  1. Hi there, since a few months now, I'm using my HX stomp and I love it. Yet, I'm still unsure in what speaker I should plug my new baby in. I have a Spider Jam which doesn't have any FX loop so it's a no as it is hard to have a neutral sound on this. And I have my drums amp (a Roland PM-10), which is so far the amp I'm using through the line input :-) I play mostly at home, and I'd like to have the best sound of my pedal at home, and since it has built-in amp & cabinet simulations, my understanding is that the most neutral speaker ("PA" ?) should be used, rather than a fancy amp with its own personality. I don't know how neutral my PM-10 can be, and I'm not familiar with the PA thing, so can you tell me what kind of speaker can I use to have something which doesn't level down my HX stomp ? I'd like to have get a speaker at a reasonable price, and which takes a reasonable amount of space :-) Many thanks
  2. I was looking for recommendations or tips about how to get the most out of my Helix LT, keeping in mind I am not a professional musician. I have my Helix LT and I have it plugged in directly into the instrument input of a Boss Katana 100 amp. I want to get the best sound possible out of my Helix so would I be better suited to buy a PA speaker of some kind like the HeadRush or something to that affect or better speakers directly into my PC and bypass the amp all together? Or would anything not really make a significant difference compared to what I am already doing?
  3. Hello, I'm having trouble getting the sound I was hoping for on the Helix, and I need some help. I'm sure it's my lack of experience with gear and effects that's the problem, not the Helix. I watched all the Jason Sadites videos and regularly read through this forum, and I do seem to be SLOWLY getting closer, but I also wonder if there is not something more fundamental wrong with my setup or settings - like guitar, monitor speakers, amp choice, etc. Here's how I'd describe the sound I'm going for: Warm, smooth, thick, rich clean tone, with some reverb/spaciousness, and a little overdrive to give it a soaring quality. I tend to prefer smoothness and warmth to pinpoint clarity and accuracy, and I definitely don't like twangy sounds. - My guitar. I have an American Elite Strat. It's great, but the single coils are probably at odds with my tonal goals. I use the neck pickup exclusively, but want it to be even more "neck-pickup-like" if that makes sense. The bridge pickups sound unusably harsh and twangy to my ears through the Helix. - I have monitor speakers connected to the Helix as my "amp". Yamaha HS7's - they are nice monitors, but possibly not as guitar "amp" and this may be part of the problem. - Over headphones, I get closer to the sound I'm looking for. Things sound spacious and rich in comparison to the monitor speaker setup. - I get a harsh digital sounding tone anytime I use a delay block. This is not as important as the main tone issue, but it is pretty pronounced, and maybe this gives a clue to what's going on. Weirdly, ping pong delay is the only one I've found that doesn't have this problem as bad. - The sound was way too harsh and digital sounding until I turned on the global EQ and dialed down the high cut to a low level, around 5kHz - Using ribbon mic's on the cabinets helps immensely as well. I've not otherwise messed with trying different cabs or cab settings... - I've experimented with different amp models, and some work better than others, but the base fenders work the best: US Double vib/nrm. - Before Helix, I used a Yamaha THR10C, and found the chorus effect to give that smooth rich sound. (it doesn't actually sound like a chorus, and I only mention this in case anyone has experience with this) Appreciate the help!! Attached is a tone example (excuse my intermediate-lollipop playing) and also a settings file in case that's useful. Thanks, JoelMAIN Headphones.hlx Test Sound Clip Main Headphones.m4a
  4. Desplázate hacia abajo para ver las instrucciones en español. Faites défiler la page vers le bas pour trouver des instructions en français. Anweisungen auf Deutsch finden Sie weiter unten. Per le istruzioni in Italiano scorrete verso il basso. Overview: For those who have access to a Spider V (MKI or MKII) amp and wish to update the G10T Transmitter, it must be done in the order shown below (first update the amp, then the G10). We strongly suggest updating the amp with the latest version of the Line 6 Updater from a desktop/laptop computer, even though it is possible to update the amp from a mobile device. Video Tutorial: Updating a Relay-Ready Spider V Amp and G10T Transmitter With a Mac Computer Video Tutorial: Updating a Relay-Ready Spider V Amp and G10T Transmitter With a Windows Computer I. Update the Spider V Amp Firmware With a Computer First, (for Windows users) download and install the Spider V drivers Go to Line6.com and click on "Support" Select "Downloads" and set the three pulldown windows under "Free Software Downloads" to: [Spider V 60], [Line 6 Drivers], [your PC OS] Click "GO" The page will update with the Line 6 drivers for the Spider V. Click 'GET DOWNLOAD' to download the driver installer to your computer. Log in to your free Line 6 User account (or create a new account) Click on 'ACCEPT AND DOWNLOAD' and follow the instructions to save the driver installer When the installer has been downloaded, double-click on it and follow the instructions to install it in your computer Next, download and install the Line 6 Updater for Spider V Go to Line6.com and click on "Support" Select "Downloads" and set the three pulldown windows under"Free Software Downloads" to: [spider V 30], [Line 6 Updater], [your Mac or PC OS] Click "GO" The page will update with the Line 6 Updater for the Spider V. Click 'GET DOWNLOAD' to download the updater program to your computer. Click on 'ACCEPT AND DOWNLOAD' and follow the instructions to save the updater installer When the program has been downloaded, double-click on it and follow the instructions to install it in your computer Lastly, update the Spider V amp Connect the Spider V’s USB port to your computer with a traditional USB cable Slide the "SELECT" switch to the USB port labeled Mac/PC Turn the amp on Open the Line 6 Updater application and sign in with your Line 6 User Account Click on the Spider V amp Click the “Update” button next to the latest firmware version at the top Follow the prompts to begin the update process Do not turn off or unplug your Spider V or computer during the update Watch for the update status to be completed on the Spider V LCD. Once completed, the amp will restart. Disconnect and reconnect the USB cable, then repeat the process for the G10T Transmitter Note: If you experience a failed update or your amp locks up during boot up, you can hold down the Amp and FX buttons to enter Update Mode. Once it's in Update Mode, attempt the update procedure again. II. Update the G10T Firmware with the Spider V Amp Make sure the Spider V amp is still connected to the computer, and that the computer is still connected to the internet Insert the G10T all the way into the Spider's Input jack Ensure that the "SELECT" switch is still engaged with the USB port labeled "Mac/PC". Turn on your Spider amp if it's off. Run the Line 6 Updater program. Sign in to your Line 6 User Account. Click on “Relay G10T” Click the “Update” button next to the latest firmware version. Follow the prompts to begin the update process. Important: Do not turn off or unplug your Spider V amp or computer during the update. The Updater will say the amp is resetting, but take note of the amp's display, as it will continue updating, ultimately showing "Part 1 of 1 100% Updating Transmttr". The amp will reset itself, ending the update process. Cómo actualizar el firmware del transmisor G10 mediante los amplificadores Spider V Descripción general: Aquellos usuarios que dispongan de un amplificador Spider V (MKI o MKII) y deseen actualizar el transmisor G10T, el proceso debe realizarse en el orden indicado a continuación (primero actualizar el amplificador y luego el G10). Recomendamos encarecidamente actualizar el amplificador con la última versión del Line 6 Updater desde un ordenador de sobremesa/portátil, aunque puede hacerse desde un dispositivo móvil. Tutorial en vídeo: Actualizar un transmisor G10T y un amplificador Spider V compatible con Relay con un ordenador Mac Tutorial en vídeo: Actualizar un transmisor G10T y un amplificador Spider V compatible con Relay con un ordenador Windows I. Actualizar el firmware del amplificador Spider V con un ordenador En primer lugar, (para usuarios de Windows) descarga e instala los controladores del Spider V Visita Line6.com y haz clic en [Soporte] Selecciona “Downloads” y, en las tres ventanas desplegables de “Free Software Downloads”, selecciona “Spider V 60”, “Line 6 Drivers”, “el sistema operativo de tu PC”. Haz clic en [GO]. La página se actualizará con los controladores de Line 6 para el Spider V. Haz clic en [GET DOWNLOAD] para descargar el instalador del controlador en tu ordenador. Inicia sesión en tu cuenta de usuario gratuita de Line 6 (o bien crea una cuenta nueva). Haz clic en [ACCEPT AND DOWNLOAD] y sigue las instrucciones para guardar el instalador del controlador. Una vez descargado el instalador, haz doble clic en él y sigue las instrucciones para instalarlo en tu ordenador. A continuación, descarga e instala el Line 6 Updater para Spider V Visita Line6.com y haz clic en [Soporte]. Selecciona “Downloads” y, en las tres ventanas desplegables de “Free Software Downloads”, selecciona “Spider V 30”, “Line 6 Updater”, “el sistema operativo de tu Mac o PC”. Haz clic en [GO]. La página se actualizará con el actualizador Line 6 para el Spider V. Haz clic en [GET DOWNLOAD] para descargar el programa del actualización en tu ordenador. Haz clic en [ACCEPT AND DOWNLOAD] y sigue las instrucciones para guardar el instalador del actualizador. Una vez descargado el programa, haz doble clic en él y sigue las instrucciones para instalarlo en tu ordenador. Por último, actualiza el amplificador Spider V Conecta el puerto USB del Spider V a tu ordenador con un cable USB tradicional. Desliza el conmutador SELECT hasta el puerto USB marcado como Mac/PC. Activa el amplificador. Abre la aplicación Line 6 Updater e inicia sesión con tu cuenta de usuario de Line 6. Haz clic en el amplificador Spider V. Haz clic en el botón [Update] situado junto a la última versión del firmware en la parte superior. Sigue las instrucciones para empezar el proceso de actualización. No desactives ni desconectes tu Spider V ni el ordenador durante la actualización. Consulta el estado de la actualización en la pantalla LCD de Spider V. Una vez completada, el amplificador se reiniciará. Desconecta y vuelve a conectar el cable USB; a continuación, repite el proceso para el transmisor G10T. Nota: Si falla la actualización o si tu amplificador se bloquea durante el arranque, puedes mantener pulsados los botones AMP y FX para entrar en el modo Update. Una vez en el modo Update, intenta realizar nuevamente el procedimiento de actualización. II. Actualizar el firmware del G10T con el amplificador Spider V Comprueba que el amplificador Spider V sigue conectado al ordenador y que éste sigue conectado a Internet. Inserta totalmente el G10T en el jack de entrada del Spider. Comprueba que el conmutador SELECT sigue conectado al puerto USB marcado como “Mac/PC”. Activa el amplificador Spider si está desactivado. Ejecuta el programa Line 6 Updater. Inicia sesión en tu cuenta de usuario de Line 6. Haz clic en [Relay G10T]. Haz clic en el botón [Update] situado junto a la última versión del firmware. Sigue las instrucciones para empezar el proceso de actualización. Importante: No desactives ni desconectes tu amplificador Spider V ni el ordenador durante la actualización. El Updater notificará que el amplificador se está reiniciando, pero observa la pantalla del amplificador, ya que continuará actualizándose y, al final, mostrará “Part 1 of 1 100% Updating Transmttr”. El amplificador se reiniciará, finalizando el proceso de actualización. Mise à jour du système de l’émetteur G10 via les amplis Spider V Aperçu: Si vous disposez d’un ampli Spider V (MKI ou MKII) et souhaitez mettre l’émetteur G10T à jour, suivez impérativement l’ordre indiqué ci-dessous (mise à jour de l’ampli avant celle du G10). Nous recommandons vivement de mettre l’ampli à jour avec la dernière version de l’application Line 6 Updater à partir d’un ordinateur fixe ou portable même s’il est possible de le faire à partir d’un dispositif mobile. Tutoriel vidéo: Mise à jour d’un ampli Spider V compatible Relay et d’un émetteur G10T avec un ordinateur Mac Tutoriel vidéo: Mise à jour d’un ampli Spider V compatible Relay et d’un émetteur G10T avec un ordinateur Windows I. Mise à jour du système de l’ampli Spider V avec un ordinateur (Pour utilisateurs Windows) Commencez par télécharger et installer les pilotes Spider V. Rendez-vous sur Line6.com et cliquez sur [Assistance]. Sélectionnez «Downloads» et réglez les trois menus déroulants sous «Free Software Downloads» sur «Spider V 60», «Line 6 Drivers», «le système de votre ordinateur». Cliquez sur [GO]. La page affiche les pilotes Line 6 pour le Spider V. Cliquez sur [GET DOWNLOAD] pour télécharger l’installeur de pilote sur votre ordinateur. Connectez-vous à votre compte utilisateur Line 6 gratuit (ou créez un compte). Cliquez sur [ACCEPT AND DOWNLOAD] et suivez les instructions pour sauvegarder l’installeur de pilote. Quand l’installeur est téléchargé, double-cliquez dessus et suivez les instructions pour l’installer sur votre ordinateur. Ensuite, téléchargez et installez l’application Line 6 Updater pour Spider V. Rendez-vous sur Line6.com et cliquez sur [Assistance]. Sélectionnez «Downloads» et réglez les trois menus déroulants sous «Free Software Downloads» sur «Spider V 30», «Line 6 Updater», «votre système Mac ou PC». Cliquez sur [GO]. La page affiche l’application Line 6 Updater pour le Spider V. Cliquez sur [GET DOWNLOAD] pour télécharger l’application de mise à jour sur votre ordinateur. Cliquez sur [ACCEPT AND DOWNLOAD] et suivez les instructions pour sauvegarder l’installeur de l’Updater. Quand le programme a été téléchargé, double-cliquez dessus et suivez les instructions pour l’installer sur votre ordinateur. Pour finir, mettez l’ampli Spider V à jour Branchez la prise USB du Spider V à votre ordinateur avec un câble USB conventionnel. Faites glisser le commutateur SELECT sur le port USB Mac/PC. Mettez l’ampli sous tension. Ouvrez l’application Line 6 Updater et identifiez-vous avec votre compte utilisateur Line 6. Cliquez sur l’ampli Spider V. Cliquez sur le bouton [Update] à côté de la version la plus récente du système en tête de liste. Suivez les instructions pour lancer la mise à jour. N’éteignez pas et ne débranchez pas le Spider V ou l’ordinateur durant la mise à jour. Surveillez l’évolution de la mise à jour sur l’écran LCD du Spider V. A la fin, l’ampli redémarre. Débranchez et rebranchez le câble USB puis recommencez l’opération pour l’émetteur G10T. Remarque: Si la mise à jour échoue ou si votre ampli se bloque durant le redémarrage, maintenez les boutons AMP et FX enfoncés pour passer en mode Update. Une fois en mode Update, recommencez la procédure de mise à jour. II. Mise à jour du système du G10T avec l’ampli Spider V Vérifiez que l’ampli Spider V est toujours connecté à l’ordinateur et que l’ordinateur est toujours connecté à internet. Insérez le G10T à fond dans la prise Input du Spider. Vérifiez que le commutateur SELECT est toujours réglé sur le port USB Mac/PC. Allumez l’ampli Spider s’il est éteint. Lancez l’application Line 6 Updater. Identifiez-vous avec votre compte utilisateur Line 6. Cliquez sur [Relay G10T]. Cliquez sur le bouton [Update] à côté de la version la plus récente du système. Suivez les instructions pour lancer la mise à jour. Important: N’éteignez pas et ne débranchez pas le Spider V ou l’ordinateur durant la mise à jour. L’Updater signale que l’ampli se réinitialise mais surveillez l’écran de l’ampli qui finira par afficher «Part 1 of 1 100% Updating Transmttr». L’ampli se réinitialise alors, concluant ainsi la mise à jour. Firmware-Aktualisierung des G10-Senders mit einem Spider V-Verstärker Vorweg: Wer Zugriff auf einen Spider V (MKI oder MKII) Verstärker hat und seinen G10T-Sender aktualisieren möchte, muss in der nachfolgend beschriebenen Reihenfolge vorgehen (erst der Amp, dann der G10). Wir möchten Ihnen ans Herz legen, den Verstärker mit der aktuellen Line 6 Updater-Version von einem Computer/Laptop aus zu aktualisieren, wenngleich dies auch mit einem Mobilgerät möglich ist. Video-Tutorial: Aktualisieren eines Relay-fähigen Spider V-Verstärkers und des G10T-Senders mit einem Mac-Computer Video-Tutorial: Aktualisieren eines Relay-fähigen Spider V-Verstärkers und des G10T-Senders mit einem Windows-Computer I. Aktualisieren der Spider V-Verstärker-Firmware mit einem Computer (Für Windows-Anwender:) Laden Sie sich die Spider V-Treiber herunter und installieren Sie sie Surfen Sie zu Line6.com und klicken Sie auf [Support]. Wählen Sie “Downloads” und mit den drei Listenfenstern unter “Free Software Downloads” zunächst “Spider V 60”, dann “Line 6 Drivers” und Ihr Computer-Betriebssystem. Klicken Sie auf [GO]. Jetzt werden die Line 6-Treiber für die Spider V-Amps angezeigt. Klicken Sie auf [GET DOWNLOAD], um sich den Treiber herunterzuladen. Loggen Sie sich in Ihr Line 6-Benutzerkonto ein (oder legen Sie sich ein Konto an). Klicken Sie auf [ACCEPT AND DOWNLOAD] und befolgen Sie die Hinweise zum Sichern des Installationsprogramms. Doppelklicken Sie auf das heruntergeladene Installationsprogramm und befolgen Sie die Hinweise für die Installation auf dem Rechner. Laden Sie sich jetzt den “Line 6 Updater” für den Spider V herunter Surfen Sie zu Line6.com und klicken Sie auf [Support]. Wählen Sie “Downloads” und mit den drei Listenfenstern unter “Free Software Downloads” zunächst “Spider V 30”, dann “Line 6 Updater” und Ihr Computer-Betriebssystem. Klicken Sie auf [GO]. Jetzt werden die Line 6 Updater-Treiber für die Spider V-Amps angezeigt. Klicken Sie auf [GET DOWNLOAD], um sich das Updater-Programm herunterzuladen. Klicken Sie auf [ACCEPT AND DOWNLOAD] und befolgen Sie die Hinweise zum Sichern des Updaters. Doppelklicken Sie auf das heruntergeladene Programm und befolgen Sie die Hinweise für die Installation auf dem Rechner. Aktualisieren Sie Ihren Spider V-Verstärker Schließen Sie den USB-Port des Spider V mit einem geeigneten Kabel an den Computer an. Schieben Sie den SELECT-Schalter zum USB-Port mit der Beschriftung “Mac/PC”. Schalten Sie den Verstärker ein. Öffnen Sie den “Line 6 Updater” und loggen Sie sich in Ihr Line 6-Konto ein. Klicken Sie auf [Spider V]. Klicken Sie auf den [Update]-Button neben der aktuellen Firmware-Version (ganz oben). Befolgen Sie die Anweisungen, um die Aktualisierung zu starten. Schalten Sie den Spider V bzw. Computer bei laufender Aktualisierung nicht aus und lösen Sie nie die Verbindung. Das LC-Display des Spider V informiert über den Fortgang der Aktualisierung. Am Ende des Vorgangs wird der Amp neu gestartet. Lösen Sie die USB-Verbindung und Wiederholen Sie den Vorgang für den G10T-Sender. Anmerkung: Wenn die Aktualisierung fehlschlägt oder der Verstärker beim Hochfahren hängen bleibt, können Sie den AMP- und FX-Taster gedrückt halten, um in den Update-Modus zu wechseln. Wiederholen Sie die Aktualisierung im Update-Modus noch einmal. II. Aktualisieren der G10T-Firmware mit dem Spider V-Verstärker Der Spider V-Verstärker muss noch mit dem Computer verbunden sein – und der Rechner muss einen Internetzugang haben. Schieben Sie den G10T komplett in die INPUT-Buchse des Spider. Schieben Sie den SELECT-Schalter zum USB-Port namens “Mac/PC”. Schalten Sie den Spider-Verstärker bei Bedarf ein. Starten Sie “Line 6 Updater”. Loggen Sie sich in Ihr Line 6-Benutzerkonto ein. Klicken Sie auf [Relay G10T]. Klicken Sie auf den [Update]-Button neben der aktuellen Firmware-Version. Befolgen Sie die Anweisungen, um die Aktualisierung zu starten. Wichtig: Schalten Sie den Spider V bzw. Computer bei laufender Aktualisierung nicht aus und lösen Sie nie die Verbindung. Der “Updater” zeigt an, dass der Verstärker zurückgestellt wird. Im Display des Amps wird der Fortgang der Aktualisierung angezeigt und wenig später “Part 1 of 1 100% Updating Transmttr”. Der Verstärker wird schließlich zurückgestellt – die Aktualisierung ist beendet. Come Aggiornare il Firmware del Trasmettitore G10 tramite Amplificatori Spider V Panoramica: Coloro che hanno a disposizione un ampli Spider V (MKI o MKII) e vogliono aggiornare il Trasmettitore G10T, dovranno farlo seguendo l’ordine indicato qui di seguito (prima aggiornare l’ampli, poi il G10) Sebbene sia possibile farlo anche da dispositivo mobile, vi consigliamo vivamente di aggiornare l’ampli con l’ultima versione del Line 6 Updater da un computer desktop/laptop. Tutorial Video: Aggiornare un Ampli Spider V Relay-Ready e un Trasmettitore G10T Con un Computer Mac Tutorial Video: Aggiornare un Ampli Spider V Relay-Ready e un Trasmettitore G10T Con un Computer Windows I. Aggiornare il firmware di un Ampli Spider V Con un Computer Prima di tutto, (per utenti Windows) scaricate e installate i driver dello Spider V Andate su Line6.com e cliccate su [Support] Scegliete “Downloads” e selezionate nei tre menu a discesa di “Free Software Downloads” “Spider V 60”, “Line 6 Drivers” e “sistema operativo del vostro PC”. Cliccate [GO]. La pagina si aggiornerà con i driver Line 6 per lo Spider V. Cliccate [GET DOWNLOAD] per scaricare sul vostro computer l’installer del driver. Loggatevi con il vostro account gratuito Line 6 (o create un nuovo account). Cliccate [ACCEPT AND DOWNLOAD] (Accetta e Scarica) e seguite le istruzioni per salvare l’installer del driver. Quando l’installer è stato scaricato, per installarlo sul vostro computer fate doppio click su di esso e seguite le istruzioni. Poi, scaricate e installate Line 6 Updater per lo Spider V Andate su Line6.com e cliccate su [Support]. Scegliete “Downloads” e selezionate nei tre menu a discesa di “Free Software Downloads” “Spider V 30”, “Line 6 Updater” e “sistema operativo Mac o PC”. Cliccate [GO]. La pagina si aggiornerà con l’Updater Line 6 per lo Spider V. Cliccate [GET DOWNLOAD] per scaricare sul vostro computer il programma di aggiornamento (Updater). Cliccate [ACCEPT AND DOWNLOAD] (Accetta e Scarica) e seguite le istruzioni per salvare l’installer dell’Updater. Quando il programma è stato scaricato, per installarlo sul vostro computer fate doppio click su di esso e seguite le istruzioni. Infine, aggiornate l’ampli Spider V Collegate la porta USB dello Spider V al computer con un normale cavo USB. Spostate il selettore SELECT sulla porta USB contrassegnata con Mac/PC. Accendete l’ampli. Aprite l’applicazione Line 6 Updater e registratevi con il vostro Account Line 6. Cliccate sull’ampli Spider V. Cliccate il pulsante [Update] in alto vicino all’ultima versione del firmware. Per iniziare l’aggiornamento seguite le istruzioni. Durante l’aggiornamento non spegnete né scollegate lo Spider V o il computer. Verificate sull’LCD dello Spider V che l’aggiornamento sia completato. Al termine, l’ampli si riavvierà. Scollegate e ricollegare il cavo USB, poi ripetete il procedimento per il Trasmettitore G10T. Nota: Se l’aggiornamento non va a buon fine o l’ampli si blocca all’accensione, tenete premuti i pulsanti AMP e FX per entrare in modalità Update. Una volta in modalità Update, eseguite di nuovo la procedura di aggiornamento. II. Aggiornare il firmware del G10T con l’Ampli Spider V Assicuratevi che l’ampli Spider V sia ancora collegato al computer e che il computer sia collegato ad internet. Inserite completamente il G10T nel jack di ingresso dello Spider. Assicuratevi che il selettore SELECT sia ancora posizionato sulla porta USB contrassegnata “Mac/PC”. Accendete il vostro Ampli Spider, se è spento. Lanciate il programma Line 6 Updater. Eseguite il login al vostro Account Line 6. Cliccate su [Relay G10T]. Cliccate il pulsante [Update] vicino all’ultima versione del firmware. Per iniziare l’aggiornamento seguite le istruzioni. Importante: Durante l’aggiornamento non spegnete né scollegate lo Spider V o il computer. L’Updater indicherà che l’ampli si sta resettando, ma voi guardate lo schermo dell’ampli, che continuerà l’aggiornamento, finché al termine scriverà “Part 1 of 1 100% Updating Transmttr”. L’ampli si resetterà, terminando il procedimento di aggiornamento.
  5. Dear Line 6, Is the FireHawk 1500 support or enhancements dead?????? You have such an awesome underdeveloped product here. The majority of the needs are in software and editability settings and with the FVB 3. I love the amp but it is a 63.14 lb. Living Room Brick. Because of the lack of editing for live performances. Please step up and enhancement the product. You have very skilled people on your team that are real players. They know what is needed. Guys isn't all about the Helix, Helix LT, Helix Stomp, Helix Effect. You won't get us to buy any of these or future products when you ignore our other stuff. PS I've had your stuff from the very beginning. You are bring in all these new product and your attention to the other products had slipped. There hasn't been an update or enhancement even on your Varaix other than the Suriken. Absolutely nothing for a very long time. People spend the money on your type of products because there is an expectation of enhancement. Both by design within software and electronic. FH1500, JTV-69, FVB3, X3Live, POD, POD farm
  6. Hey guys, Can i still download tones from the Custom tone section for my largely obsolete Spider Valve mk2? I don't see my amp pictured anymore so wondering is it still supported, if so can i just download tones for another amp?
  7. Hi, wondered if anyone had any suggestions. So I'm using the HX effects for bass into a Darkglass Vintage Microtubes 500 amp. The amp has an intelligent footswitch for going between clean, vintage microtubes circuit, B3K circuit, and mute (4 buttons). When trying to use an effects loop on the HX effects through the loop send/return on the amp, it is bypassing the footswitch somehow, so I can't change between the onboard distortions or mute the amp. This doesn't happen with 2 cable method (no loop) and didn't happen using individual effects in the loop... any ideas?
  8. Is there a way to get this knobs? i've been looking for this knobs at online store (including ebay) without luck, my Master Knob of my Spider IV fell off, a friend of mine loose it and is annoying. He told me he will buy it for me but i cant find it. Thanks
  9. Hi Guys. I've bougt my new HELIX and moving my first steps to learn and use it! I am interested in using it with my Hughes and Kettner Grandmaister 36, in particular connecting Helix to amp's FX Loop return, so using my tube amp only as power amp. The question is not about other ways to connect… I know the 4CM, I know connection in front of amp…I know that everyone has his own preferences….but my necessity is to connect in the amp's fx loop return. OK… I've a simple question, becouse I've read tons of articles, posts, spent hours on YouTube videos… but without finding the answer :) If I connect from HELIX 1/4 mono out to amp's FX Loop return,.....what should I select in global settings INS/OUTS? Instrument or Line? Thanks for your attention and feedbacks!
  10. One of my idiot sons friend thought it would be a wonderful ideal to take my marshall head speakers out and plug directly into my spiders guitar inputs. Naturally blowing the spider amp sky high. Anybody can guide me into which board i should be looking at. Opened amp up and to my surprise they are only a couple of boards in amp. Man any help would be greatly appreciated.
  11. I'm considering purchasing an HX stomp and know that it can do some of the scenarios I want to use with it but I'm not sure about this one. I could figure this out myself in a couple seconds if I owned the pedal but I'm trying to decide if this is possibly before I make the purchase. TLDR: Can you run an amp/cab block on one side of a signal chain only and allow the other to go out unprocessed. The point would be to run a stereo rig with a real amp on one side and a modeled amp on the other. I know that I can do this if I run my entire pedalboard as it exists into the HX stomp acting just as Amps - then I could plug one pedalboard output into the Stomp and one into my amp. Easy. However, I really want the HX stomp to be fully integrated with my pedalboard. I want to run my signal chain as Guitar > Comp > Drive Pedals > HX Stomp > Stomp FX Loop Send > Stereo Delay > Stereo Reverb > Stomp FX Loop Return > Pedalboard out If I do this it lets me add additional effects before or after my delay/reverb or put my delay/reverb after the amp sims if I'm running direct. It also lets me make patches with no amps to run my pedalboard into real amps. However, there is a specific use where I want to run a single real amp and a modeled amp as the other side of the stereo chain. Can I do this within the editor/interface? I would need to put an amp block on the right side signal only. Thanks and sorry if this has been answered - Searching for "Stomp Amps Left Only" or Right Only doesn't give any useful search results...
  12. sdahe

    HX Stomp into an Amp

    Hello, So my main option for now is to use the HX Stomp as another pedal in my pedalboard (mainly for modulation effects like delay, reverb, tremolo, etc..). I have some questions about the overdrive section. How good or which OD in the HX Stomp sounds good when using a tube amp?.. Im gonna upload a photo of my pedalboard for reference. My other question is... Im using a Tumnus mini and I would like to know if its a good idea to usa a booster from the HX Stomp or buy an analog booster?. Im using a Fender Blues Deluxe Tube Amp and the HXS is connected with the 4CM so I can put my modulations through the amp's effects loop.
  13. Hello all, Lets say you don't have 4CM as an option into your amp. What are some suggestions of constructing a signal chain to go in the front of an amp? For example - volume pedal --> distortion --> delay --> Reverb?
  14. This document explains how to update the flash memory of the Spider Valve Mk II using the FBV Mk II and Line 6 Monkey on Windows XP, Vista, 7 and Mac OSX 10.4.11, 10.5.8 and 10.6.x. Before you get started, you will need to have your Spider Valve Mk II connected to the FBV Mk II (Express or Shortboard) using a CAT-5 cable, and you will need to have your FBV Mk II unit connected to an open USB port on the back of your computer (do not use a USB hub). Be sure that your computer is connected to the internet. 1) Run Line 6 Monkey and you will be asked which unit you want to work with. Highlight the Spider Valve Mk II unit and select 'OK'. 2) Highlight 'flash memory' (it will turn blue), then select 'update selection'. 3) Select 'Yes' to continue. 4) Select "I Accept" for the software agreement and select 'continue'. 5) Select 'Yes' to update the Flash memory. Do not run any other programs or disconnect the cables while performing the update. 6) Allow the unit to go through the update process. This can take 5-10 minutes. 7) Select 'OK' when the update is finished. 8) You will see a green check mark in front of flash memory to show it is now up to date. Note: If you are having difficulty getting the Spider Valve Mk II to update, you can start the amp in "boot mode" by powering the unit up while holding the "Manual" and "B" buttons.
  15. Deutsch Français Application Q: Where are the song settings for the Spider IV 30 that I saw on the box? A: The Spider IV 30 song settings are a PDF download at the following link: Spider IV Settings Q: What are the amp models on the Spider IV 30? A: There are a twelve total amp models on the Spider IV 30. There are two versions (red and green) of the following amp models: Clean, Twang, Blues, Crunch, Metal, and Insane. Clean Red: Crisp, amazing clean tones. Clean Green: Based on a 1973 Hiwatt custom 100 with extended tone control range and tightened up the low end. Twang Red: based on mid 60’s Fender amps. Twang Green: based on vintage tweed amps (i.e.’53 Fender tweed Deluxe, ’58 Fender tweed Bassman and a ’60 Gibson Explorer). Blues Red: Three helpings of ’65 Marshall JTM-45, one scoop of ’58 Fender Bassman, a schmeer of ’63 Fender Vibroverb, and a dash of Supro for good measure. Blues Green: Based on a fawn Vox AC-30 amplifier with an updated and expanded tone control circuit. Crunch Red: Based on a '68 Marshall Plexi 50 Watt head. Crunch Green: Based on a ‘68 Marshall Plexi 100 watt with a few added extras; the combination of a Variac and jumpered input channels. Metal Red: based on the Mesa Dual Rectifier with enhancements. Metal Green: An aggressive high gain Amp Model with a unique Mid control that will sweep though an entire spectrum of tone on one knob. Insane Red: Line 6’s “dialed in for shreddingâ€� version of the Mesa Dual Rectifier red channel. Insane Green: You get an obscene helping of distortion, while still retaining tonal definition and character. The tone settings list numerous songs can be used to dial sounds in as well. If you would like to return your unit to the original presets, please perform a factory reset (see below). Q: How do I use the tuner on the Spider IV 30? A: Press the Tuner button, and notice the volume is muted during tuning. The amp model LEDs will indicate when the string you are playing is in tune. The 'Crunch' and 'Metal' LEDs will both light up when the string is in tune. If the Clean or Crunch LED are lit, the string is flat. If Metal or Insane LEDs are lit, the string is sharp. Once all your strings are in tune, press any button to exit Tuner Mode. Q: How do I perform a factory reset on the Spider IV 30? A: The factory reset procedure for a Spider IV 30 is to hold down the 'A' button as you turn on the power and hold the button for 5-8 seconds. Q: Are there any videos I can view to learn about the Spider IV series? Spider IV movies Q: How is the Spider IV 30 different than the Spider III 30? A: THe Spider IV 30 amp models have been expanded (from 4 to 12) and re-voiced, and the back is now a "3/4" style. See the FBV controller information for added control features below. Setup/Connections Q: What are the inputs and outputs on the Spider IV 30? A: Guitars, Microphones, Basses, and Acoustic Guitars can be connected using the 1/4" instrument input. MP3/CD players can be connected using the 3.5 mm jack. Headphones can be connected using the stereo ¼" output. Q: Is there a 'direct out' on the Spider IV 30? What can this be connected to? A: The headphones jack (a stereo ¼" output) can also be used as a recording output or into a PA or stereo system. You can connect an external preamp into the CD input or the Mic input of the Spider IV 30. Q: Can the Spider IV 30 and the CD/MP3 input be used at the same time? Will I hear both of these devices through the headphones? A: Yes Q: Can I use an FBV controller with the Spider IV 30? A: Yes, the FBV2 and FBV Express (original or Mk II) are recommended for use with the Spider IV 30. The FBV Shortboard (Mk I or II) may work (but is not supported) and will allow access the 'bonus' 36 presets by being able to switch between banks 1-9. Be aware that while most end users will not have a problem with the Shortboard connections, slight voltage fluctuations from your wall outlet may cause the Spider IV 30 to power cycle itself if the FBV shortboard is connected. If this happens, simply remove the FBV shortboard. Q: Does the Spider IV 30 have an effects loop? A: There is no effect loop on the Spider IV 30 amplifier. Specifications Q: How do I power the Spider IV 30? A: The Spider IV 30 uses a standard IEC power cable to a wall outlet. Q: How can I get a cover for the Spider IV 30? A: The Spider IV 30 does not have a cover available from Line 6 at this time. Registration/Warranty Q: What is the warranty on the Spider IV 30? A: the warranty on the Spider IV 30 is twelve months from the date of purchase. Line 6 Warranty Information Q: How can I register my Spider IV 30? product registration F.A.Q. Troubleshooting/Service Q: My Spider IV 30 seems to be malfunctioning. What can I do as an end user? Line 6 Amp Troubleshooting Q: Where can I get a cover or replacement knobs for my Spider IV 30 amp? Line 6 Store Wo kann ich die Song Einstellungen finden, die ich auf der Box gesehen habe? Die Spider IV Song Einstellungen können Sie heir als PDF Datei finden: Spider IV Settings Welche Verstärkermodelle sind auf dem Spider IV 30? Auf dem Spider IV 30 sind insgesamt 12 Verstärkermodelle installiert. Für die folgenden Modelle gibt es jeweils zwei Versionen, eine Green und eine Red Version: Clean, Twang, Blues, Crunch, Metal und Insane. Clean Red: Tolle, knackig saubere Töne. Clean Green: Auf Basis eines Hiwatt custom 100W von 1973 mit erweiterter Tonreichweite. Twang Red: Auf Basis von Fender Verstärkern der 60er Jahre. Twang Green: Auf Basis verschiedener Vintage Tweed Verstärker, ein 53er Fender Tweed Delxue, ein 58er Fender Tweed Bassman und ein 60er Gibson Explorer. Blues Red: Auf Basis eines 65er Marshall JTM-45, eines 58er Fender Bassman, eines 63er Fender Vibroverb sowie eines Supro. Blues Green: Auf Basis eines Vox AC-30 mit modifizierten Schaltkreisen. Crunch Red: Auf Basis eines 68er Marshall Plexi Topteils von 50W. Crunch Green: Auf Basis eines 68er Mashall Plexi 100W mit kleineren Extras. Metal Red: Auf Basis eines Mesa Dual Rectifiers mit Verbesserungen. Metal Green: Ein aggressiver High Gain Sound mit einzigartiger Mid Kontrolle. Insane Red: Line 6 Shred Version des roten Kanals eines Mesa Dual Rectifiers. Insane Green: Massig Verzerrung bei maximaler Definition. Wie benutze ich den Tuner des Spider IV 30? Drücken Sie den Tuner Knopf, der Verstärker sollte sich nun stumm stellen. An den Verstärkermodell LEDs können Sie dann erkennen ob die Saiten gestimmt sind. Wenn Crunch und Metal leuchten, dann ist die Saite gestimmt, leuchtet Clean oder Crunch dann ist Sie zu tief und wenn Metal oder Insane leuchten, dann ist Sie zu hoch. Wenn dann alle Saiten gestimmt sind können Sie irgendeinen Knopf drücken um den Tuner Modus zu verlassen. Wie kann ich das Gerät auf Werkseinstellungen zurückstellen? Halten Sie den A Knopf einfach für 5-8 Sekunden während des Startens des Verstärkers gedrückt. Gibt es Videos zur Spider IV Serie? Spider IV movies Was ist der Unterschied zwischen Spider IV 30 und Spider III 30? Der Spider IV 30 hat zusätzliche 8 Modelle und ist komplett neu gestimmt und der Verstärker ist nun im ¾“ Stil. Installation und Anschlüsse: Welche Ein- und Ausgänge gibt es? Gitarren, Mikrofone, Bässe und Akustikgitarren können Sie an den ¼“ Instrumenteingang anschließen, MP3 und CD Spieler an den 3.5mm Jack und Kopfhörer an den ¼“ Stereo Ausgang. Hat der Verstärker einen Direct Out? Der ¼“ Kopfhörerausgang kann als Ausgang für Aufnahmen verwendet werden oder an eine PA oder Stereoanlage angeschlossen werden. Einen externen Vorverstärker können Sie an den CD Eingang oder den Mikrofoneingang anschließen. Kann ich Instrument- sowie CD/MP3 Eingang gleichzeitig benutzen und das ganze auf meine Kopfhörer spielen? Ja. Kann ich einen FBV mit dem Spider IV 30 benutzen? Ja, FBV2 und FBV Express (original oder MkII) sind empfohlen. Das FBV Shortboard (MkI oder MkII) funktioniert eventuell und ist damit auch nicht unterstützt. Die meisten Benutzer haben mit dem Shortboard keine Probleme, Stromschwankungen können aber den Verstärker zum Abschalten bringen wenn das Shortboard angeschlossen ist. Wenn das passiert, trennen Sie das Shortboard einfach vom Verstärker. Hat der Spider IV 30 einen Effects Loop? Nein. Spezifikationen: Wie kann ich den Spider IV 30 mit Strom versorgen? Der Verstärker braucht ein ganz normales IEC Stromkabel. Woher bekomme ich eine Schutzhülle für den Verstärker? Line 6 stellt leider zurzeit keine Schutzhüllen für den Spider IV 30 her. Registrierung und Garantie: Wie lange habe ich Garantie auf den Verstärker? Die Garantie auf dem Verstärker beträgt 12 Monate ab Kaufdatum. Line 6 Garantieinformationen Wie kann ich mein Gerät registrieren? Produktregistrierung: F.A.Q. Fehlerbehebung und Service: Mein Spider IV hat Probleme, was kann ich tun? Line 6 Amp Troubleshooting Wo kann ich Ersatzteile für mein Spider IV 30 kaufen? Line 6 Store Ou puis-je trouver les configurations de chansons que j’ai vu sur la boîte ? Vous pouvez les trouver ici : Spider IV Settings Quels sont les modèles d’amplis sur mon Spider IV 30 ? Il y en a 12 modèles d’amplis en total. Les modèles suivantes ont deux versions (une version verte et une version rouge) : Clean, Twang, Blues, Crunch, Metal et Insane. Clean Red : Pour un ton brillant et clair. Clean Green : Basé sur un Hiwatt Custom 100 modifié de 1973. Twang Red : Basé sur les amplis Fender des années 60. Twang Green : Basé sur des amplis tweed vintage comme le Fender Tweed Deluxe de 1953, le Fender Tweed Bassman de 1958 et le Gibson Explorer de 1960. Blues Red : Une mixture de plusieurs amplis : le Marshall JTM-45 de 1965, un Fender Bassman de 1958, un Fender Vibroverb de 1963 et un Supro. Blues Green : Basé sur un Vox AC-30 avec circuit modifié. Crunch Red : Basé sur une tête ampli Marshall Plexi 50 Watt de 1968. Crunch Green : Basé sur un Marshall Plexi 100 Watt. Metal Red : Basé sur un Mesa Dual Rectifier avec quelques augmentations. Metal Green : Un modèle à gain élevé très agressive et une contrôle des Mis très spéciale. Insane Red : La version Shred de Line 6 d’un Mesa Dual Rectifier en canal rouge. Insane Green : Beaucoup de distorsion mais avec toute la définition tonale. Comment puis-je utiliser le Tuner sur mon Spider IV 30 ? Poussez le bouton Tuner, l’ampli est muet maintenant. Les LEDs des modèles amplis vous montrent si une corde est accordée. Crunch et Metal s’allument si la corde est accorée. Si Clean ou Crunch sont allumé, la corde est plat et si Metal ou Insane sont allumé, la corde est forte. Poussez n’importe quel bouton pour fermez le mode Tuning. Comment puis-je réinitialiser l’appareil ? Maintenez enfoncé le bouton A pour 5 à 8 secondes tout en allumant le Spider. Y a-t-il des vidéos pour le Spider IV ? Spider IV movies Quelle est la différence entre Spider IV 30 et Spider III 30? Vous avec plus de modèles de 4 à maintenant 12 modèles. Et l’arrière est maintenant ¾. Installation et Connexion : Quels entrées et sorties est-ce que je peux trouver sur le Spider IV 30 ? Vous pouvez connecter Guitares, Microphones, Basses et Guitares Acoustiques au connecteur instrument 1/4" ; les lecteurs MP3 et CD au jack 3.5mm et les casques à la sortie stéréo 1/4". Y a-t-il un Direct Out ? Vous pouvez utiliser le jack de casques comme sortie d’enregistrement et connecter un préampli externe à la sortie Mic. Puis-je utiliser l’entrée instrument en même temps que l’entrée CD/MP3 ? Pui-je écouter tous ça avec mes casques ? Oui, pas de problème. Puis-je utiliser un contrôleur FBV avec mon Spider IV 30 ? Oui, le FBV2 et FBV Express (originale ou MkII) sont recommandés. Le FBV Shortboard (MkI et MkII) peut fonctionner mais n’est pas supporté. Y a-t-il un Effects Loop ? Non. Spécifications : Comment puis-je allumer le Spider IV 30 ? Avec un câble standard IEC. Est-ce que je peux acheter une couverture pour mon Spider IV 30 ? Line 6 ne produit pas des couvertures à ce moment. Régistration, garantie : Y a-t-il une garantie avec le Spider IV 30 ? Oui, une garantie de 1 année. Line 6 Warranty Information Comment puis-je enregistrer mon Spider IV 30 ? Registration des produits Line6 Dépannage et Service: J’ai des problèmes avec mon Spider IV 30, qu’est-ce que je fais ? Dépannage des amplis Line6 Puis-je acheter des remplacements ? Line 6 Store
  16. Application Q: What are the presets on my Spider Valve Mk II amplifier? A: There are 64 presets (16 banks of 4) programmed into the amplifier at the factory, and 64 empty preset locations for an end user to program. The empty 64 preset locations have defaults (1-4) in them as a starting place. Q: I noticed that the Artist/Song Presets from the Spider IV are not present on the Spider Valve Mk II? A: Yes, as many end users had asked for more locations to store their personal presets, we have removed the artist/song presets for the Spider Valve Mk II. Q: Are the Spider Valve Mk II series amps Mono(phonic)? A: Yes, the Spider Valve Mk II series amplifiers have a monophonic output (as are most tube amplifiers). Q: How can I connect a POD unit to my Spider Valve Mk II series amplifier? POD Connections, Routing and the 4 Cable Method Q: Do the Master volume and presence control applied to the power amp section only? A: Yes, the master volume and presence control are true analog. Q: Where is the Master volume located in the chain? A: it is after the preamp, and before the power amp. Specifications Q: What are the specifications of the Spider Valve Mk II series? Spider Valve Mk II Specifications Q: What speakers are used in the Spider Valve Mk II amplifiers? Spider Valve 112: Celestion Vintage 30, 8 ohm Spider Valve 212: (2) Celestion Vintage 30s, 16 ohm Spider Valve 412 cabinet: (4) Celestion Vintage 30s, 16 ohm Q: What tubes ship in the Spider Valve Mk II amplifiers? What is the power output? Spider Valve Mk II 112 & 212: (2) Sovtek 12AX7LPS or Shuguang Electron Group 12AX7B China preamp tubes, (2) Sovtek 5881/6L6WGC WXT matched set power amp tubes. 40 watts. Spider Valve Mk II HD: (2) Sovtek 12AX7LPS or Shuguang Electron Group 12AX7B China preamp tubes, (4) Sovtek 5881/6L6WGC WXT matched set power amp tubes. 100 watts. Q: What are the function of the 12AX7 tubes? A: V1 is the booster to the output tubes, V2 is the phase inverter for the output tubes. When viewing the SV MKII HD100 upright from the back, V1 is on the right side. On the combo, V1 is on the left side. Q: Can the Spider Valve Mk II handle another 12A_7 style tube without damage to tubes or circuitry? A: Yes, the 12AX7/AT7/AU7/AY7 types, but as these tubes act as a phase inverter and a boost to the power amp (rather than traditionally "cleaning up" the preamp section), you may not get the result you are looking for. Care must be taken with this and should be done by a technician well practiced in tube technology and modifications of this type. Q: What Line 6 controllers work with the Spider Valve Mk II series amplifier? Controller compatibility chart Setup/Connection Q: Is there a bias switch to change the power tubes to EL-34s or other power tube types? A: No, the Spider Valve Mk II does not offer bias switchable options and was designed to only be used with 5881WXT type of 6L6 power amp output tubes. Q: Is there a headphone output on the Spider Valve Mk II series? A: There is no headphone output on the Spider Valve Series, but you can use the XLR output to go to a mixer, then use the headphone jack from the mixer. Q: Can I run my Spider Valve Mk II amplifier without a speaker load? A:No, you cannot run the Spider Valve Mk II series without a speaker load. Please see the following link for more information on cabinet connections: Cabinet Connection and Ohm F.A.Q. Q: Can the Spider Valve Mk II be run with a Variac? A: This is not recommended as the lower voltage can cause problems with the digital processing in the Preamp section of the Spider Valve Mk II. Q: Can I run a Palmer S.E., THD Hot Plate, Power Soak, etc. for speaker simulation or power attenuation? A: There are no known issues regarding the use of any direct recording simulators or power attenuators between the power amp output and the speaker cabinet, but if there is damage caused by improper connections or malfunctioning gear, it will not covered under the Line 6 warranty. Be aware of “red plating”, when too much current across the plate can result in damage to the tubes and nearby circuits. Q: Do the Spider Valve Mk II 112 and 212 combos support external speaker cabinets? If so, will the external cabs mute the internal speakers of the Spider Valve Mk II? A: Yes, the Spider Valve Mk II supports the use of additional cabinets. Please ensure that the ohm load is correct to avoid damaging your amplifier if you intend to use both the internal and external speakers simultaneously. Q: What is the bias voltage for the Sovtek 5881WXT matched set of tubes? A: 35 mV (+/-2mV) Q: Does the XLR output still send signal when the amplifier is on standby? A: In some cases yes, in some no. Spider Valve MkII actually has two different modes of Direct Out, which can be found in the SETUP menu in Edit Mode. They are Studio and Performance. Studio mode is a traditional, DSP POD-style output with speaker simulation and will function when the amplifier is in standby mode. In contrast, Performance mode takes a tap off the output transformer, then goes through the speaker simulation before going through the Direct Out. This allows the tubes to interact with the DSP, and because the amp has to be on to allow this to happen, there will be no signal at the XLR output in standby if Performance mode is selected. Q: Does the Spider Valve Mk II have an FX loop? A: the Spider Valve Mk II has a pre-amp out (effect send) and Power amp in (effect return) section. Q: Is the effect loop series or parallel? Is the effect loop mono or stereo? A: The effect loop is series mono. Q: Does the Spider Valve Mk II have MIDI ports? A: Yes, the Spider Valve Mk II amplifier series has both MIDI in and MIDI out ports, and the Spider Valve Mk II will accept MIDI program changes on MIDI Channel 1-16, from values 00-127. The MIDI channel assignment can be accessed by pushing the “presetâ€� encoder and using the left/right arrow key to reach “MIDIâ€�. This greatly increases the opportunity to integrate Spider Valve MkII’s into your existing rig, and will also allow you to update your amps firmware via MIDI. See the advanced user’s guide for the full MIDI story. Q: Can I send a MIDI output from the Spider Valve Mk II to another MIDI-capable Line 6 amplifier and control both amplifiers with one FBV controller? A: Yes, but as different Line 6 amplifiers have different MIDI implementation you will want to go through each control on the FBV to ensure that you get the desired control on both units. Q: Is there an editor where I can connect my Spider Valve Mk II to my computer and edit/store tones? A: Yes, Spider Valve Edit is the editing software that can be used to edit the Spider Valve Mk II. Please see the following link for more information: Spider Valve Edit FAQs Q: What do the FBV Shortboard series stomp, FX Loop/Function 1, and Function 2 do? A: The Stomp button activates the "boost" on both the original FBV shortboard series (Mark I) and Mark II controllers. The FX Loop (Mk I)/Function 1 (Mk II) activates the Noise gate. The Function 2 (Mk II only) activates the loop feature on the Spider Valve Mk II. Q: What do the FBV Shortboard MkII Function 1 and Function 2 buttons do with Spider Valve MkII? How is it different from the original FBV Shortboard? A: The Function 1 button activates the Boost setting saved with each preset. The Boost setting (up to 8db pre and/or post amp model) can be found by entering “edit modeâ€� on the SV MkII and pressing the R arrow on the 4-way nav button. The button equivalent to Function 1 on the original FBV Shortboard is labeled FX Loop. The Function 2 button (FBV Shortboard MkII only) is equivalent to the Quick Loop button on the faceplate of the SV MkII, and arms the built in Looper. For full functionality of the Looper, see the Spider Valve MkII Advanced User Guide. In addition, the Stomp button activates the first Smart FX on both the original and MkII FBV Shortboard controllers. Q: Can I run the Spider Valve Mk II head with only the outer two power tubes (removing the inner pair) to operate at a lower output volume? A: Yes, it is safe to run the Spider Valve Mk II Head with two 5881WXT’s. It is recommended that the output impedance be run at "half" when running in this configuration. An example would be running the 8 ohm head output connected to the 16 ohm cabinet connection, or the 4 ohm output to an an 8 ohm cabinet connection. Line 6 recommends re-biasing your amplifier to 35mv after removing the tubes, as the current draw will have changed. This should be done by a technician with lots of experience with tube amps. Q: Where is the fuse located in the chain? A: The fuse is located between the 12AX7s and 5881WXT’s (there is no master fuse). Spider Valve Cabinet FAQs Q: What are the specs for the Line 6 4x12 cabinet? A: 9 ply, ¾" wood with Celestion Vintage 30 speakers. There is no internal baffle. Q: What are the ohm load options for the 4x12 cabinet? A: The switchable ohm load options for the 4x12 cabinet are 16 ohm mono, 8 ohm stereo, and 4 ohm mono. Trouble shooting Q: What is the manufacturer's warranty for Spider Valve Mk II? A: The warranty for the Spider Valve Mk II amplifier is 12 months from the date of purchase, the tubes warranty is 90 days from the date of purchase. Q: How do I perform a factory reset on my Spider Valve Mk II? A: The factory reset for the Spider Valve Mk II series is to hold the "A" button while powering the unit, then pushing the presets encoder twice. Q: I hear a loud "pop" when I switch between certain presets on the Spider Valve MKII. Is this normal? A: Sometimes if the Channel Volume is set or saved too low on a preset a loud pop will be heard when navigating to it and away from it. This is because of the level difference between it and the other saved presets. Try adjusting the preset's Channel Volume above "12:00" and saving again. This should level out the difference between the presets and eliminate the popping sound. Q: Will using different brands of 6L6 tubes in the Spider Valve Mk II void the warranty? A: Yes, so no Ruby, Mesa, GT, JJ, Tung-Sol, or others. The characteristic curves are not close enough, and the vacuum-to-gas ratio (soft, medium, hard) of the tube plays a role in that. So it’s best to use the specified Sovtek 5881WXT matched set tubes. Q: My amp seems to be malfunctioning. What can I do as an end user? Amp Troubleshooting Tube Troubleshooting and Replacement *Q: Where can I download a Spider Valve Mk II manual? Line 6 Manuals Miscellaneous Q: Where can I get a cover for my Spider Valve Mk II amplifier? Cases And Covers
  17. Hello, I was wonderwing if with the HX Stomp i can get 1 signal chain with effects/amp modeling/IR impulse to go to the FOH, and a second signal with just effects/amp modeling to my power amp and cab (so without IR impulse). Thanks in advance!! Greetz Wouter
  18. I just purchased a helix like a week ago and I’m starting to get the hang of it. I’ve been watching tutorials and and reading forums. My question was, does it matter where in the signal path I place the amp or cabs? Does it make a difference? Everything I’ve read or watched, people just seem to place it somewhere in the middle. Or do you have to think of it like a real pedal board, where the amp comes last? Please help.
  19. Hey All, I was watching this YT vid: https://www.youtube.com/watch?v=FjEolSe71Jw At the beginning of the vid, the guy explains his signal chain and says that he's "...hooked the POD directly into the power amp section of the Blues Deluxe bypassing the whole tone stack. The Pre Amp is gone and he can't even control the volume using the amp's controls...". Can some of the more experienced folks tell me is this is the same as using an amp's F/X loop? And, if anyone has a BD, is this a typical "feature" of the amp or is it something that's most probably a post purchase mod? Thanks! Bill
  20. Hi there, I'm fairly new to audio production, and have just purchased a Pod Studio UX2 for my mic setup and I'm looking to invest in some quality headphones. From what I understand the higher the Ohm range of the headphones the more power they require and if underpowered there volume may be bottleknecked. My UX2 is connected to a desktop, and I was wondering if connecting the headphones (I'm looking at a pair of Beyerdynamic DT 880 Pro's) to the output of my UX2 would provide enough power to get good, loud sound? Thanks Billy
  21. My POD HD500X is rebooting every time I try to change an amp model in my patches. What should I do to solve this problem? Can someone help me?
  22. Hello, I recently bought a Gibson Les Paul and Line 6 V60 amp from guitar center. I'm having trouble with editing the options in the amp to match the tone of some of the songs that I want to learn and cover. Is there a place where I can learn about what each effect, settings ,etc does. I tried doing Since I've Been Loving You, Archilles Last Stand, Sweet Child of Mine, and Jimmy Hendrix songs but I have a hard time figuring out what I need to do. I know experience plays a big role but I really have no one that I can turn to for help/advice to help me get started. Did I mess up on my gear selection? I've literally spent hours researching online what a particular artist uses for a particular song and then try to find the right settings on my amp using the spider app but I always get stuck. Any suggestions would like tutorials, or at least gear recommendations would help. I can't go out and buy things right away but what are some essential things that I can add in the future that will help with my guitar experience? Thanks!
  23. mbarbara

    Fender Clean?

    I've always really liked the sound of my 8-string through a clean fender amp (usually a Fender Deluxe) with the pickups set to single coil, but I can't quite seem to recreate that sound in the Helix. It's got a certain tightness and "slap" that just doesn't come through when I try messing with the fender amps in the Helix. I even tried using my own Fender Twin cab IRs. I need something crisp and spanky but still clean, can anyone tell me what to do?
  24. Hello, I have been using Helix for 7-8 months and have listened to myself primarily through headphones. I have also been recording stuff using Helix. Now I want to start using it in studios and gigs and I am unsure whether to plug in Helix directly into speakers or to go into the guitar amp input? I also don't know how does this affect the presets I've been using. My presets all use a combo amp + cab block, which I guess I should change if I actually use a real amp? Thanks in advance :)
  25. Francais. Deutsch. If you are having trouble with your Line 6 amplifier, please check the following points before taking your amplifier to your local Authorized Service Center: Q: I am noticing that I am getting volume/tone changes when playing at a high volume? A: Try "parking" the knobs (except master volume) at 100% to ensure that the knobs are not moving to the "current" location rather than the preset location. Recall a preset once the knobs are parked to ensure the tone you are working with is a preset rather than the current knob position. Q: My master volume has almost no change past 6? A: This is due to the volume pot installed on all Line 6 amplifiers. A solution to this would be to replace it with an "audio" pot, but this modification wouldn't make it louder - just smoother. Line 6 originally installed audio pots on the AXSYS, but players didn't like them because they made the amp feel "wimpy". Players also did not like the fact that they had to turn the amp up to about 4-5 before it would start "happening" and 7-8 on the gig. Even though there was still a good amount of headroom, player feedback was that they preferred the amplifier with the traditional volume pot, so that is the style used with Line 6 amplifiers. - Perform a factory reset of the unit: Factory Reset Procedures Volume and Signal Troubleshooting - turn off other volume controls not being used (i.e. volume trim pots) - Ensure there is no debris in the CAT-5 or input jacks. - Unplug all other units from the audio chain, as well as any CAT-5 cables and controllers. - Use a high-quality cable you know is functional (i.e. works in a different application) directly into the instrument input, bypassing all other effect units. - Ensure that the guitar/bass is outputting signal. Try the amplifier with another instrument you know is functional (if possible).Make sure all the input and output jacks are tight. Check the instrument with different pickup settings to make sure it is not a bad pickup connection. - Ensure that both the positive (white) and negative (black or red) wires are fully connected to the speaker, and that the speaker output from the amplifier is plugged into the correct jack (when applicable). - Check the effects loop (if the amp has one). If you're not getting any signal, try plugging into the RETURN side of the loop to see if there is any output. Likewise, with a source feeding the input, plug the SEND into another line level device to see if you're getting signal. Tone and Rattle Troubleshooting - Check the make sure all buttons on the unit are not stuck - Be sure that all screws on the unit (handle, corners, baffle boards, speakers) are snug. - Ensure that there are no foreign objects (i.e. silicon packs) stuck in the speaker enclosures Q: Are the tone controls on the on a Line 6 amplifier passive or active, and where is the "flat" level? A: Each amp model is different, and the controls behaves like the target amp. Most tube amplifiers will have a passive tone stack with makeup gain. Line 6 tone stacks are designed to behave just like the modeled amp (both the good and the not so good). Some amplifier tone stacks are the closest to flat when set B-0, M-10, T-0, but it is different for each model. Power Troubleshooting - Ensure that there is sufficient power coming from the power outlet into the amplifier. Try a different circuit to ensure there is not a power issue at the outlet. - Make sure that the both ends of the power cable are snug in their sockets. Tube Amplifiers Troubleshooting - Make sure the tube is firmly seated in the tube socket. - If the tube(s) make a popping sound accompanied by intermittent light from tubes, the tube is failing and needs to be replaced. - If there is "white frost" inside the tube, the tube has cracked and it must be replaced. - If there is a "tube" ringing (not due to loose screws), there may be a failing tube. Replace the 12AX7s individually and the matched 6L6 pairs to determine if a tube has failed. Replacing Tubes - Always replace power amp tubes with matched set(s) every 12-24 months depending on the amount of use, and have the bias checked and/or adjusted by an authorized Line 6 Service Center. - Preamp tubes (such as the two 12AX7s) only need to be replaced when they are microphonic (ringing sound from tubes when tapped), noisy, or damaged. Replacing tubes should be done a Line 6 authorized service center. The digital stage and analog tube stages communicate with one another, and so are not like the all analog tube (valve) amps from the 1960's and 70's. As a result, one cannot swap tubes out like in the old days. So please use the following specified tubes (valves) when the amp is taken to a service center. For Spider Valve series amps use the following specified tubes, 12AX7B China for pre-amps. 5881WXT Sovtek (matched pair), with the base cup bottom. 5881WXT Sovtek (matched quartet), with the base cup bottom for the HD-100 and HD100 MkII. For the Alchemist series amps use the following specified tubes, 12AX7EH Electro-Harmonix low microphonic for V1-3 pre-amp positions. 12AX7AC5HG Ruby Tube HG-High Gain for V4. 12AX7B China for V5. 6L6GCMSTR Ruby Tube (matched pair) power amp. For the DT50 series amps use the following specified tubes, 12AX7EH Electro-Harmonix approved for the DT50 pre-amps. EL34EH Electro-Harmonix (matched pairs) for the power amps. For the DT25 series amps use the following specified tubes, 12AX7EH Electro-Harmonix approved for the DT25 pre-amps. EL84EH Electro-Harmonix (matched pairs) for the power amps. Visit your local Line 6 Service Center for servicing a tube amp, as these have High Voltage Shock Hazards. Product Repair Si vous avez des problèmes avec un des amplis Line 6, vérifiez les points suivants avant de retourner l’ampli. J’ai des changements de son si je joue à un volume très fort. Pourquoi ? Laissez tous les boutons sur 100% excepte le Master Volume pour assurer que le bouton ne tourne pas à la position courante mais à la position du preset. Démarrez un preset pour assurer le ton est le propre. Presque rien ne se passe si je tourne le Master Volume passe 6, pourquoi ? C’est à cause du potentiomètre installé dans les amplis Line 6. On pouvait installer un potentiomètre audio qui ne changerait pas le volume. Line 6 a essayé d’installer des potentiomètres audio mais les joueurs ne l’ont pas aimé. Dépannage de volume et signal : Éteignez les autres contrôles volumes comme les potentiomètres Volume Trim. Assurez qu’il n’y en a pas du débris dans les jacks CAT-5 ou entrée. Débranchez tous les autres appareils de la chaine audio aussi bien que tous les câbles CAT-5. Utilisez un câble que vous savez qu’il fonctionne directement dans l’entrée, contournant les effets. Assurez-vous que la guitare ou basse produit un signal. Essayez un autre instrument que vous savez fonctionne. Vérifiez tous les jacks d’entrée et sortie. Essayez l’instrument avec autres micros pour vérifier que ce n’est pas un micro défectueux. Vérifiez les câbles blanc et noir ou rouges connectés au haut-parleur. Vérifiez la sortie du haut-parleur du ampli est branché correctement. Vérifiez la boucle d’effets, si vous ne recevez aucun signal, branchez le dans le RETURN. Avec une source dans l’entrée, branchez le SEND dans le Line In d’un autre appareil pour vérifier le signal. Dépannage hochet et ton : Vérifiez si un des boutons et collé. Toutes les vis doivent être serrées. Assurez vous qu’il n y en a aucun objet étranger dans haut-parleurs. Est-ce que les contrôles sur l’ampli Line 6 sont passifs ou actives ? Et ou est le niveau « flat » ? Tous les modèles sont différents et les contrôles changent pour chaque modèle. La plupart des amplis à tubes sont passives. Le ton des amplis Line 6 sont conçus pour se comporter exactement comme l’ampli modelé. Quelques modèles sont très près de « flat » sur B-01, M-10 et T-0 mais c’est différent pour chaque modèle. Dépannage alimentation: Assurez-vous qu’il y en a assez de courant pour l’ampli. Vérifiez lé prise de courant. Vérifiez le câble et les connecteurs. Dépannage des amplis à lampes : Vérifiez que le tube est bien assis dans la douille. Si le tube fait des sons popping avec de la lumière intermittente. Vous devez remplacer le tube. S’il y en a de gelée blanche dans le tube, vous devez le remplacer. Si le son sonne c’est possible qu’un des tubes est défectueux, remplacez les tubes individuellement. Remplacement des tubes : Remplacez les tubes tous les 12 à 24 mois selon l’usage. Et laissez vérifier/ajuster le Bias d’un centre service Line 6 autorisé. Les tubes de préampli doivent uniquement être changés s’ils sont microphoniques endommagés ou bruyant. Si vous avez des problèmes après toutes ces suggestions, veuillez visiter un centre service Line 6 s.v.p. mais n’oubliez pas la preuve d’achat si vous êtes dans les 12 mois de garantie. Réparation des produits Sollten Sie Probleme mit Ihrem Line 6 Verstärker haben, dann überprüfen Sie bitte erste die Folgenden Punkte bevor Sie sich an ein Line 6 Service Center wenden: Ich kann Ton/Lautstärkeänderungen feststellen wobald ich sehr laut spiele, woher kommen diese? Stellen Sie die Knöpfe, abgesehen vom Master Volume auf 100% um sicherzustellen, dass diese sich nicht zur derzeitigen Position bewegen sondern auf der Position des Presets bleiben. Starten Sie dann ein Preset um zu überprüfen ob der Ton der des Presets und nicht der der derzeitigen Position des Knopfes. Mein Master Volume verändert die Lautstärke beinahe nicht nach 6, warum? Dies liegt am installierten Potentiometer, Line 6 hat in frühen Modellen mal einen Audio Potentiometer ausgetestet aber den Spieler gefiel dieser nicht. Lautstärke und Signalproblembehebung: Schalten Sie andere Lautstärkeregler ab (Trim Pots zum Beispiel). Stellen Sie sicher, dass kein Dreck im CAT-5 Eingang oder anderen Jacks ist. Entfernen Sie alle anderen Geräte und Cat-5 Kabel aus der Kette. Benutzen Sie ein Kabel, von dem Sie wissen dass es funktioniert und schließen Sie es direkt zwiscen Gerät und Instrument, umgehen Sie so alle zusätzlichen Effekte. Stellen Sie sicher, dass Ihr Isntrument ein Signal abgibt. Versuchen Sie falls möglich ein anderes Instrument von dem Sie wissen, dass es funktioniert. Versuchen Sie unterschiedliche Tonabnehmereinstellungen. Stellen Sie sicher, dass das weiße sowie das schwarze bzw. rote Kabel korrekt an den Lautsprecher angeschlossen sind. Überprüfen Sie außerdem den jack des Lautsprechers. Überprüfen Sie den Effects Loop, falls vorhanden. Wenn Sie kein Signal bekommen, dann versuchen Sie diesen in den RETURN zu stecken um zu sehen ob Sie ein Signal bekommen. Genauso sollten Sie auch den SEND in ein anderes LINE IN Gerät stecken. Ton und Rassel Probleme: Überprüfen Sie alle Knöpfe um zu sehen ob einer feststeckt. Überprüfen Sie ob alle Schrauben fest angezogen sind. Stellen Sie sicher, dass keine unerwünschten Objekte im Kautsprecher sind. Ist die Tonsteuerung aktiv oder passiv? Und wo ist die flach Einstellung? Jedes Modell ist unterschiedlich und die Steruerung des Verstärkers verhält sich so wie die des modellierten Verstärkers. Manche Modelle sind sehr flach, wenn sie auf B-01, M-10 und T-01 eingestellt sind, dies trifft aber nicht unbedingt zu da dies auch unterschiedlich ist zwischen den verschiedenen Modellen. Röhrenverstärker Problemlösung: Stellen Sie sicher, dass die Röhren fest im Sockel sitzen. Sollten die Röhren ein Poppen machen und dazu unterbrochen leuchten, dann ist diese kaputt und muss ersetzt werden. Falls weißer Frost in der Röhre ist, dann hat diese en Loch und muss ebenfalls ersetzt werden. Sollte ein Röhre klingeln, könnte es sich auch um eine kaputte Röhre handeln. Ersetzen Sie dann die Röhren einzeln um festzustellen, welche kaputt ist. Röhren ersetzen: Lassen Sie Röhren immer mit passenden Sets alle 12 bis 24 Monate je nach Nutzung ersetzen und lassen Sie den Bias von einem autorisierten Line 6 Service Center überprüfen bzw. anpassen. Vorverstärker Röhren brauchen erst dann ersetzt zu wernden, wenn sie mikrofonisch oder rauschend klingen bzw. beschädigt sind. Sollten Sie dann immernoch Probleme mit dem Verstärker haben besuchen Sie bitte ein Line 6 Service Center. Vergessen Sie aber nicht den Kaufbeleg falls Sie sich noch in den 12 Monaten der Garantie befinden. Produktreparatur
×
×
  • Create New...