Search the Community

La version française. Zur deutschen Version. With the latest v2.0 update for the DT25/DT50 amplifiers, you must send MIDI parameters to the amp to change the settings such as the preamp models. Here are the links to the MIDI documentation to reference when programming your MIDI gear to send the proper parameters to control the settings of the DT series amplifiers: http://line6.com/media/dt50/DT50_MIDI_CC_Reference_v2_0_RevA_English.pdf http://line6.com/media/dt50/DT25_MIDI_CC_Reference_v2_0_RevA_English.pdf http://line6.com/media/dt50/DT_MIDIGuide_v2_0_RevA_English.pdf Using the POD HD500/HD500x to Send MIDI Parameters to the DT amplifiers You can use the POD HD500 as a MIDI controller to send MIDI CC parameters to change. Just connect the MIDI OUT from the POD HD500/HD500x to the MIDI IN on the DT amplifier with a MIDI cable. Then, go in the POD HD500/HD500x's MIDI assign screen (by holding the MOVE button for a few seconds) to assign a footswitch to send the desired MIDI parameters to change the settings on the DT amplifier. From here, you need to reference the DT amplifier's MIDI CC reference charts above to assign the proper MIDI CC to a footswitch on the POD HD500/HD500x. For example, on the DT50 amplifiers, sending MIDI CC# 11 with a value of 0-30 will change the assigned HD amp model set to any one of the voicings on Channel A of the DT50. So, if you want to change Voicing I of Channel A on the DT50 amp from the original Fender Blackface to be a Hiway 100 amp model instead, do the following: On any preset (blank or not) on the POD, go to the POD's MIDI Assign screen by holding the MOVE button for a few seconds. We suggest doing this on a blank new preset so that you can use this preset to send these MIDI messages to your DT amplifier. Let's assign Footswitch 1 (FS1) to send MIDI CC# 11 with a value of 003. Press on FS1 so that the arrow is pointing to it in the POD's screen. Turn Knob 1 to select MIDI CH: Base. Turn Knob 2 to select Message: CC. Turn Knob 3 to select CC# 011. Turn Knob 4 to select Value: 003. You can exit the MIDI Assign screen by pressing the View button once. Now, by simply pressing the FS1 footswitch, you will be sending MIDI CC# 11 value 003 to the DT50 amp which will change the Voicing I of Channel A on the DT50 amp from the original Fender Blackface to be a Hiway 100 amp model. Press the Save button once, rename the preset with the knobs below the screen, then press the Save button once again to store these settings to the POD's preset. MIDI CC#11 value 0-30 will change the HD amp model on Channel A of the selected voicing on the DT25/DT50 amp. MIDI CC#12 value 0-30 will change the HD amp model on Channel B of the selected voicing on the DT25/DT50 amp. Here are reference charts for both the DT25 and the DT50 from the MIDI Reference guide to help you set your values when programming MIDI to the switches of the POD HD500/HD500x. MIDI can be assigned to any of the footswitches of the POD HD500/HD500x EXCEPT for the Bank Up and Bank Down switches. Using MIDI OX to send MIDI parameters to the DT amplifiers You can also use MIDI OX software to send the desired MIDI messages to your DT amplifier when using a dedicated MIDI interface connected between your computer set to work with MIDI OX and the DT amplifier's MIDI IN port. In MIDI OX, click on the Send MIDI Controller Messages button to see the following window: You’ll want to use the drop down window to select the desired controller event (as referenced in the documentation above such as MIDI CC# 11 or CC#12, etc.) and then select the value on the right (as in the previous example above, value of 0-30, etc.) then, hit the Send button to send that MIDI message to the DT amplifier. Notice the text by the numbers which are simply part of the standard MIDI spec. These descriptors are irrelevant for the DT amps – again, just look for the number that correlates to the DT parameter you want to send. It also may be confusing that the numbers are not listed sequentially. If you wanted to change the preamp for the current Voicing of channel A you would select number 11 (labeled expression in the MIDI OX drop down) and number 3 (if you wanted to load the Hiway 100 model for example) using the up/down buttons in the field labeled Value. Hit send and the current Voicing on Channel A should be the Hiway 100. Avec la dernière mise à jour 2.0 pour le DT25 et DT50, vous devez transférer des paramètres MIDI pour changer des configurations comme les modèles préamplis. Documentation MIDI : http://line6.com/med...evA_English.pdf http://line6.com/med...evA_English.pdf http://line6.com/med...evA_English.pdf L’utilisation du POD HD500 ou HD500x pour la transmission des paramètres MIDI : Vous pouvez utiliser POD HD 500 ou HD 500x comme contrôleur MIDI pour transmettre des informations MIDI CC. Connectez le MIDI OUT du POD HD500/500x au MIDI IN de l’ampli DT avec un câble MIDI. Dans le menu MIDI Assign (maintenez le bouton MOVE pour quelques secondes) et assignez la fonction MIDI désirée a un des commutateurs au pied pour changer les configurations sur le DT. D’ici, utilisez la référence MIDI CC des amplis DT au-dessus pour assigner des commandes MIDI CC propres à un commutateur au pied POD HD500/HD500x. Exemple : Sur l’ampli DT50, envoyer une commande MIDI CC# 11 avec une valeur de 0 à 30 changera le modèle ampli HD à un des tons sur le canal A du DT50. Donc, si vous voulez changer le ton 1 du canal A sur le DT50 d’un Fender Blackface à un modèle Hiway 100 : Sur un des presets (vide ou pas) sur le POD naviguez dans l’écran MIDI Assign (en maintenant le bouton MOVE pour quelques secondes.) Nous suggérons de faire ca avec un preset vide, comme ca, vous pouvez l’utiliser pour transmettre des commandes MIDI à l’ampli DT. Assignez Footswitch 1 (FS1) la commande MIDI CC# 11 avec une valeur de 003. Cliquez FS1 (la flèche doit pointer au FS1 sur l’écran du POD). Tournez le bouton pour sélectionner MIDI CH : Base. Tournez-le pour sélectionner Message : CC. Tournez-le pour sélectionner CC# 011. Tournez-le pour sélectionner Value : 003. Quittez l’écran MIDI Assign avec le bouton View. Poussez FS1 pour envoyer la commande MIDI CC#11 avec valeur 003 à l’ampli DT. Cette action changera le ton 1 du canal A sur le DT de Fender Blackface à Hiway 100. Poussez le bouton Save, renommez le preset avec les boutons dessous l’écran et poussez Save encore une fois pour enregistrer les configurations. MIDI CC#11 avec une valeur de 0 à 30 changera le modèle ampli HD sur canal A du ton sélecté sur l’ampli DT25/DT50. MIDI CC#12 avec une valeur de 0 à 30 changera le modèle ampli HD sur canal B du ton sélecté sur l’ampli DT25/DT50. Tableaux de référence : Vous pouvez assigner MIDI à tous les commutateurs à pied sur le POD HD500/HD500x sauf les commutateurs Bank Up et Bank Down. L’utilisation de MIDI OX pour envoyer des paramètres MIDI aux amplis DT : Vous pouvez utiliser le logiciel MIDI OX pour transmettre des paramètres MIDI à votre ampli DT si vous utilisez une interface MIDI connecté à votre ordinateur et le MIDI IN du DT. En MIDI OX, cliquez « Send MIDI Controller Messages » pour voir cet écran : Utilisez le menu déroulant pour sélecter la commande, comme MIDI CC#11 ou CC#12. Après, vous pouvez sélecter la valeur sur le côté droit. (Une valeur de 0 à 30). Cliquez « Send » pour transmettre le paramètre à votre ampli DT. Ici vous pouvez voir les descriptions a côté des nombres, ignorez-les. Cherchez le nombre que vous voulez configurer sur le DT. Exemple : Si vous voulez changer le préampli du ton sélectez sur canal A, vous sélectez #11 (le texte dit que c’est « Expression » mais ignorez ca.) et 3 dans le menu « Value » si vous voulez le Hiway 100. Seit der neusten Aktualisierung 2.0 für die DT25 und DT50 Verstärker müssen Sie MIDI Parameter and den Verstärker senden um Eisntellungen wie Vorverstärkermodelle zu verändern. Quellen zur MIDI Programmierung: http://line6.com/med...evA_English.pdf http://line6.com/med...evA_English.pdf http://line6.com/med...evA_English.pdf MIDI Parameter per POD HD500/HD500x übertragen: Sie können das POD HD500 als MIDI Controller verwenden um MIDI CC Parameter zu übertragen. Schließen Sie dazu den MIDI OUT Ausgang des POD HD500/500x an den MIDI IN Eingang am DT Verstärker mit einem MIDI Kabel an. Öffnen Sie dann das MIDI Assign Menu auf dem POD indem Sie den MOVE Knopf gedrückt halten um hier nun einen Fußschalter zuzuweisen, der dann die MIDI Parameter and den DT Verstärker versendet. Von hier an sollten Sie das oben erwähnte Referenzmaterial verwenden um die korrekten MIDI Parameter auf den Fußschalter zuzuweisen. Zum Beispiel: Wenn Sie vom POD die MIDI Parameter MIDI CC#11 mit einm Wert von 0 bis 30 an den DT Verstärker verschicken, wird das ausgewählte HD Verstärkermodell auf einen der Töne des Kanals A vom DT50 umstellen. Was also bedeutet, dass wenn Sie Voicing 1 des Kanals A auf dem Verstärker vom original Fender Blackface auf einen Hiway 100 umstellen wollen, machen Sie folgendes: Von irgendeinem Preset aus, öffnen Sie das MIDI Assign Menu indem Sie den MOVE Knopf gedrückt halten. Wir empfehlen, dass Sie einen freien Preset Slot verwenden, sodass Sie weiterhin von diesem Slot aus die MIDI Parameter versenden können. Verwenden wir nun Fußschalter 1 (FS 1) um die Parameter MIDI CC#11 mit Wert 003 zu versenden. Drücken Sie dazu auf den FS1 sodass der Pfeil auf den POD Bildschirm zeigt. Drehen Sie dann Knopf 1 um MIDI CH: Base auszuwählen. Drehen Sie an Knopf 2 um Message: CC auszuwählen. Drehen Sie an Knopf 3 um CC#011 auszuwählen. Drehen Sie an Knopf 4 um Value: 003 auszuwählen. Jetzt können Sie das Fenster verlassen indem Sie den View Knopf drücken. Nun können Sie, indem Sie FS1 drücken, die zugewählten MIDI Parameter an den Verstärker senden, was in unserem Fall dazu führt, dass Voicing 1 auf Kanal A auf das Hiway 100 Modell umgestellt wird. Drücken Sie den Save Knopf. Bennen Sie das Preset mit den Knöpfen unter dem Bildschirm um und drücken Sie dann wiederum Save um alle Einstellungen auf dem Preset abzuspeichern. MIDI CC#11 Wert 0-30 verändert das HD Verstärker Modell auf dem gewählten Voicing des Kanals A des DT Verstärkers. MIDI CC#12 Wert 0-30 verändert das HD Verstärker Modell auf dem gewählten Voicing des Kanals B des DT Verstärkers. Hier noch Listen der MIDI Parameter als Referenz: MIDI Parameter mit MIDI OX versenden: Sie können auch die MIDI OX Software verwenden um MIDI Parameter an den DT Verstärker zu schicken. Dazu benötigen Sie eine MIDI Schnittstelle für Ihren Computer, den Sie dann an den MIDI IN des Verstärkers anschließen, sowie an Ihren Computer. Klicken Sie im MIDI OX Fenster auf Send MIDI „Controller Messages“. Folgendes Fenster öffnet sich: Verwenden Sie dann das Dropdown Menu um den gewünschten MIDI CC# auszuwählen. Wählen Sie dann einen Wert aus auf der rechten Seite und klicken Sie den „Send“ Knopf. Achtung, im Dropdown Menu werden den Zahlen verschiedene Texte zugewiesen. Ignorieren Sie diese einfach. Die Beschreibungen sind hier irrelevant. Suchen Sie nach der Nummer und wählen Sie diese aus. Die Zahlen Sind außerdem nicht immer geordnet. Wenn Sie also das Voicing des Kanals A einstellen wollen, wählen Sie Nummer 11. Nummer 11 hat bei uns zum Beispiel die Beschreibung „Expression“, die uns aber nicht weiter interessiert. Außerdem wählen Sie die Nummer 3 im „Value“ Feld. Klicken Sie dann „Send“. Das derzeitige Voicing des A Kanals sollte nun auf Hiway 100 gestellt sein.

Zur deutschen Version. La version française. DT50/DT25 Terminology FAQ Headroom: how much signal “room” you have before encountering distortion, particularly saturation. If you have more headroom, the amp will feel like it responds to your playing subtleties better and you’ll have more dynamic range for expressive playing. With less headroom, you get into serious distortion without playing as hard. Topology: the layout of a “feedback topology” of the amp circuit referring to the voicing of the global negative feedback of the DT50. Changing circuits will change the voicing of the amplifier. Class A: an amp design where current is flowing through the tubes constantly. Headroom is deceased, so tone becomes distorted sooner. Class AB: an amp design where a pair of tubes work together by “trading” duties (one is conducting current while the other is in cutoff). Sometimes the term “push-pull” operation is used to describe this mode. Provides greater headroom and tone remains clearer as a result. Bias: the voltage value between the control grid (grid #1) and the cathode, which dictates the power tube’s behavior in terms of distortion cutoff/saturation. There are two types of biasing methods: fixed-bias and cathode-bias (sometimes called self-biasing or auto-biasing). The DT50 operates in fixed-bias when in Class AB. It switches to cathode-bias when in Class A. Pentode: the power output tube is a 5-electrode object (cathode, control grid, screen grid, suppressor grid and anode/plate). In the DT50, when you select “Pentode” mode, you’re operating the EL34’s as pentode tubes. Triode: a mode of operation where the power tube has 3 active elements (cathode, control grid and the anode/plate). Setting the front panel control switch of the DT50 to “Triode” alters the behavior of the EL34’s to act more like a triode, which reduces the power output and affects the high end as well. Negative Feedback Loop (NFL): a certain amount of the amplifier’s output is fed back into the amp to reduce distortion and increase headroom. A higher amount of NFL results in a tighter response overall, which some guitarists may be seeking in their tone. A lesser amount of NFL can make the amp feel more “wild” and “unruly”, which can be also desirable to many guitarists. It depends on what you’re after and the context of what you’re after, musically-speaking. Tonestack: the EQ-region inside of an amp where the Bass, Mid and Treble controls live. Sag: the response of the amp to what is being played on the electric guitar, usually heard at the beginning of playing a note or chord that follows a rest. Sag will cause the amp to get a bit quieter, while also causing more distortion. DT50/DT25 FAQ Headroom: Der Headroom beschreibt den maximalen Spielraum, den Sie haben bevor es im Verstärker zu Verzerrung und Ãœbersteuerung kommt. Mehr Headroom bedeutet, dass der Verstärker einen größeren dynamischen Bereich abdeckt auch während ausdrucksstarkem Spielen. Weniger Headroom wiederum bedeutet, dass es früher und öfter zu Verzerrungen kommen wird ohne hart zu spielen. Topology: Das Layout der Schaltung des Verstärkers. Die Änderung dieses Layouts wird den Klang des Verstärkers verändern. Class A: Bei diesem Layout fließt Strom kontinuierlich durch die Röhren. Headroom ist verringert und Verzerrungen treten früher auf. Class AB: Bei diesem Modell arbeiten beide Röhren zusammen. “žPush-Pull” wird hier oft im Englischen als Beschreibung verwendet. Das Resultat ist ein vergrößerter Headroom sowie klarerer Ton. Bias: Die Anzahl Volt zwischen Steuergitter und Katode. Bias steuert das Verhalten des Verstärkers. Es gibt zwei Methoden für Bias: Eine fixierte Ausrichtung (fixed bias) und die Katodenausrichtung (cathode bias) (auch automatische Ausrichtung genannt). Der DT50 ist im fixierte Ausrichtung Modus in Class AB und wechselt in den automatischen in Class A. Pentode: Die Röhre ist ein 5-Elektroden Objekt (Katode, Steuergitter, Bremsgitter, Schirmgitter und Anode). Im DT50 schalten die EL34 Röhren sich in den Pentode Modus wenn Sie “žPentode” auswählen. Triode: In diesem Modus hat die Röhre nur 3 akive Elemente (Katode, Steuergitter und Anode). Wenn Sie das Gerät auf “žTriode” eisntellen wird die EL34 mehr wie eine Triode verhalten. Sie erhalten weniger Output und die Höhen werden auch beeinflusst. Negative Feedback Loop (NFL): Ein Teil des Outputs eines Verstärkers wird wieder zurück in den Verstärker gespeist um Verzerrung zu vermindern und den Headroom auszudehnen. Mehr NFL bedeutet eine bessere Reaktion und weniger NFL resultiert in einem wilden und unbändigem Ton. Es kommt aber darauf an, was Sie persönlich mögen. Tonestack: Der Teil des EQs in dem sich die Eisntellungen für Bass, Mitten und Höhen befinden. Sag: Die Reaktion des Verstärkers auf das was Sie auf einer elektrischen Gitarre spielen. Sag kann man meist am Anfang einer Note oder eines Akkordes hören. Der Verstärker wird ein wenig leiser und verursacht mehr Verzerrung. DT50/DT25 FAQ Headroom: Si un ampli a beaucoup de Headroom, ca veut dire que cet ampli garde un son clair avant de rencontrer de la distorsion et une saturation sonore. Jouer l’ampli se sent comme vous avez beaucoup plus de gamme dynamique. Si vous jouez sur un ampli avec moins de headroom, vous obtenez des distorsions graves sans jouer aussi fort. Topology: La disposition du circuit dans l’ampli. Changer cette disposition change le son de l’ampli. Class A: Une topologie où le courant circule constamment à travers les lampes. Moins de headroom = distortion plus tot. Class AB: Deux tubes coopèrent. Plus de headroom = le son garde la clarté plus longtemps. Bias: La tension entre grille de commande et cathode. Le bias configure la saturation de la lampe. Il y en a deux modes de bias : bias fixé et bias à cathode. Le DT50 est en mode bias fixé en Class AB et change à bias à cathode en mode Class A. Pentode: Le tube de sortie est un objet avec 5 électrodes: Cathode, grille de commande, grill écran, grille d’arrêt et anode. Sur le DT50 si vous sélectez « Pentode » les tubes EL34 sont en mode penthode. Triode: Le tube de sortie a trois éléments: Cathode, grille de commande et anode. Si vous mettez le DT50 en mode Triode, les EL34 agirent plus comme des Triodes. Puissance de sortie réduite et Triode affecte les sons de haute. Negative Feedback Loop (NFL): Une certaine quantité de la sortie du ampli est réintroduit dans l’ampli pour réduire la distorsion et pour ajouter du headroom. Plus de NFL se traduit par une réponse meilleure et moins de NFL vous fournis on ton sauvage et incontrôlé. Le NFL dépends à vos préférences. Tonestack: La région de l’égaliseur dans l’ampli. Les contrôles Basse, Mi et Aigu s’habitent ici. Sag: La réponse de l'amplificateur à ce qui est joué sur la guitare électrique. Normalement, vous l’entendez au début de la note. Sag provoque de la distorsion. DT50/DT25 FAQ

Q: How many amp models are included in the POD HD300? A: The POD HD devices come with 16, built from the ground up HD amp models. Q: How many effects are included with the POD HD modelers? A:The POD HD modelers sport 80, 90, and 100+ effect types respectively derived from the Line 6 M9/M13 effects processors. Click HERE for a complete list of effects models.

This document explains how to update the flash memory of the Spider Valve Mk II using the FBV Mk II and Line 6 Monkey on Windows XP, Vista, 7 and Mac OSX 10.4.11, 10.5.8 and 10.6.x. Before you get started, you will need to have your Spider Valve Mk II connected to the FBV Mk II (Express or Shortboard) using a CAT-5 cable, and you will need to have your FBV Mk II unit connected to an open USB port on the back of your computer (do not use a USB hub). Be sure that your computer is connected to the internet. 1) Run Line 6 Monkey and you will be asked which unit you want to work with. Highlight the Spider Valve Mk II unit and select 'OK'. 2) Highlight 'flash memory' (it will turn blue), then select 'update selection'. 3) Select 'Yes' to continue. 4) Select "I Accept" for the software agreement and select 'continue'. 5) Select 'Yes' to update the Flash memory. Do not run any other programs or disconnect the cables while performing the update. 6) Allow the unit to go through the update process. This can take 5-10 minutes. 7) Select 'OK' when the update is finished. 8) You will see a green check mark in front of flash memory to show it is now up to date. Note: If you are having difficulty getting the Spider Valve Mk II to update, you can start the amp in "boot mode" by powering the unit up while holding the "Manual" and "B" buttons.

Application Q: What are the presets on my Spider Valve Mk II amplifier? A: There are 64 presets (16 banks of 4) programmed into the amplifier at the factory, and 64 empty preset locations for an end user to program. The empty 64 preset locations have defaults (1-4) in them as a starting place. Q: I noticed that the Artist/Song Presets from the Spider IV are not present on the Spider Valve Mk II? A: Yes, as many end users had asked for more locations to store their personal presets, we have removed the artist/song presets for the Spider Valve Mk II. Q: Are the Spider Valve Mk II series amps Mono(phonic)? A: Yes, the Spider Valve Mk II series amplifiers have a monophonic output (as are most tube amplifiers). Q: How can I connect a POD unit to my Spider Valve Mk II series amplifier? POD Connections, Routing and the 4 Cable Method Q: Do the Master volume and presence control applied to the power amp section only? A: Yes, the master volume and presence control are true analog. Q: Where is the Master volume located in the chain? A: it is after the preamp, and before the power amp. Specifications Q: What are the specifications of the Spider Valve Mk II series? Spider Valve Mk II Specifications Q: What speakers are used in the Spider Valve Mk II amplifiers? Spider Valve 112: Celestion Vintage 30, 8 ohm Spider Valve 212: (2) Celestion Vintage 30s, 16 ohm Spider Valve 412 cabinet: (4) Celestion Vintage 30s, 16 ohm Q: What tubes ship in the Spider Valve Mk II amplifiers? What is the power output? Spider Valve Mk II 112 & 212: (2) Sovtek 12AX7LPS or Shuguang Electron Group 12AX7B China preamp tubes, (2) Sovtek 5881/6L6WGC WXT matched set power amp tubes. 40 watts. Spider Valve Mk II HD: (2) Sovtek 12AX7LPS or Shuguang Electron Group 12AX7B China preamp tubes, (4) Sovtek 5881/6L6WGC WXT matched set power amp tubes. 100 watts. Q: What are the function of the 12AX7 tubes? A: V1 is the booster to the output tubes, V2 is the phase inverter for the output tubes. When viewing the SV MKII HD100 upright from the back, V1 is on the right side. On the combo, V1 is on the left side. Q: Can the Spider Valve Mk II handle another 12A_7 style tube without damage to tubes or circuitry? A: Yes, the 12AX7/AT7/AU7/AY7 types, but as these tubes act as a phase inverter and a boost to the power amp (rather than traditionally "cleaning up" the preamp section), you may not get the result you are looking for. Care must be taken with this and should be done by a technician well practiced in tube technology and modifications of this type. Q: What Line 6 controllers work with the Spider Valve Mk II series amplifier? Controller compatibility chart Setup/Connection Q: Is there a bias switch to change the power tubes to EL-34s or other power tube types? A: No, the Spider Valve Mk II does not offer bias switchable options and was designed to only be used with 5881WXT type of 6L6 power amp output tubes. Q: Is there a headphone output on the Spider Valve Mk II series? A: There is no headphone output on the Spider Valve Series, but you can use the XLR output to go to a mixer, then use the headphone jack from the mixer. Q: Can I run my Spider Valve Mk II amplifier without a speaker load? A:No, you cannot run the Spider Valve Mk II series without a speaker load. Please see the following link for more information on cabinet connections: Cabinet Connection and Ohm F.A.Q. Q: Can the Spider Valve Mk II be run with a Variac? A: This is not recommended as the lower voltage can cause problems with the digital processing in the Preamp section of the Spider Valve Mk II. Q: Can I run a Palmer S.E., THD Hot Plate, Power Soak, etc. for speaker simulation or power attenuation? A: There are no known issues regarding the use of any direct recording simulators or power attenuators between the power amp output and the speaker cabinet, but if there is damage caused by improper connections or malfunctioning gear, it will not covered under the Line 6 warranty. Be aware of “red plating”, when too much current across the plate can result in damage to the tubes and nearby circuits. Q: Do the Spider Valve Mk II 112 and 212 combos support external speaker cabinets? If so, will the external cabs mute the internal speakers of the Spider Valve Mk II? A: Yes, the Spider Valve Mk II supports the use of additional cabinets. Please ensure that the ohm load is correct to avoid damaging your amplifier if you intend to use both the internal and external speakers simultaneously. Q: What is the bias voltage for the Sovtek 5881WXT matched set of tubes? A: 35 mV (+/-2mV) Q: Does the XLR output still send signal when the amplifier is on standby? A: In some cases yes, in some no. Spider Valve MkII actually has two different modes of Direct Out, which can be found in the SETUP menu in Edit Mode. They are Studio and Performance. Studio mode is a traditional, DSP POD-style output with speaker simulation and will function when the amplifier is in standby mode. In contrast, Performance mode takes a tap off the output transformer, then goes through the speaker simulation before going through the Direct Out. This allows the tubes to interact with the DSP, and because the amp has to be on to allow this to happen, there will be no signal at the XLR output in standby if Performance mode is selected. Q: Does the Spider Valve Mk II have an FX loop? A: the Spider Valve Mk II has a pre-amp out (effect send) and Power amp in (effect return) section. Q: Is the effect loop series or parallel? Is the effect loop mono or stereo? A: The effect loop is series mono. Q: Does the Spider Valve Mk II have MIDI ports? A: Yes, the Spider Valve Mk II amplifier series has both MIDI in and MIDI out ports, and the Spider Valve Mk II will accept MIDI program changes on MIDI Channel 1-16, from values 00-127. The MIDI channel assignment can be accessed by pushing the “preset” encoder and using the left/right arrow key to reach “MIDI”. This greatly increases the opportunity to integrate Spider Valve MkII’s into your existing rig, and will also allow you to update your amps firmware via MIDI. See the advanced user’s guide for the full MIDI story. Q: Can I send a MIDI output from the Spider Valve Mk II to another MIDI-capable Line 6 amplifier and control both amplifiers with one FBV controller? A: Yes, but as different Line 6 amplifiers have different MIDI implementation you will want to go through each control on the FBV to ensure that you get the desired control on both units. Q: Is there an editor where I can connect my Spider Valve Mk II to my computer and edit/store tones? A: Yes, Spider Valve Edit is the editing software that can be used to edit the Spider Valve Mk II. Please see the following link for more information: Spider Valve Edit FAQs Q: What do the FBV Shortboard series stomp, FX Loop/Function 1, and Function 2 do? A: The Stomp button activates the "boost" on both the original FBV shortboard series (Mark I) and Mark II controllers. The FX Loop (Mk I)/Function 1 (Mk II) activates the Noise gate. The Function 2 (Mk II only) activates the loop feature on the Spider Valve Mk II. Q: What do the FBV Shortboard MkII Function 1 and Function 2 buttons do with Spider Valve MkII? How is it different from the original FBV Shortboard? A: The Function 1 button activates the Boost setting saved with each preset. The Boost setting (up to 8db pre and/or post amp model) can be found by entering “edit mode” on the SV MkII and pressing the R arrow on the 4-way nav button. The button equivalent to Function 1 on the original FBV Shortboard is labeled FX Loop. The Function 2 button (FBV Shortboard MkII only) is equivalent to the Quick Loop button on the faceplate of the SV MkII, and arms the built in Looper. For full functionality of the Looper, see the Spider Valve MkII Advanced User Guide. In addition, the Stomp button activates the first Smart FX on both the original and MkII FBV Shortboard controllers. Q: Can I run the Spider Valve Mk II head with only the outer two power tubes (removing the inner pair) to operate at a lower output volume? A: Yes, it is safe to run the Spider Valve Mk II Head with two 5881WXT’s. It is recommended that the output impedance be run at "half" when running in this configuration. An example would be running the 8 ohm head output connected to the 16 ohm cabinet connection, or the 4 ohm output to an an 8 ohm cabinet connection. Line 6 recommends re-biasing your amplifier to 35mv after removing the tubes, as the current draw will have changed. This should be done by a technician with lots of experience with tube amps. Q: Where is the fuse located in the chain? A: The fuse is located between the 12AX7s and 5881WXT’s (there is no master fuse). Spider Valve Cabinet FAQs Q: What are the specs for the Line 6 4x12 cabinet? A: 9 ply, ¾" wood with Celestion Vintage 30 speakers. There is no internal baffle. Q: What are the ohm load options for the 4x12 cabinet? A: The switchable ohm load options for the 4x12 cabinet are 16 ohm mono, 8 ohm stereo, and 4 ohm mono. Trouble shooting Q: What is the manufacturer's warranty for Spider Valve Mk II? A: The warranty for the Spider Valve Mk II amplifier is 12 months from the date of purchase, the tubes warranty is 90 days from the date of purchase. Q: How do I perform a factory reset on my Spider Valve Mk II? A: The factory reset for the Spider Valve Mk II series is to hold the "A" button while powering the unit, then pushing the presets encoder twice. Q: I hear a loud "pop" when I switch between certain presets on the Spider Valve MKII. Is this normal? A: Sometimes if the Channel Volume is set or saved too low on a preset a loud pop will be heard when navigating to it and away from it. This is because of the level difference between it and the other saved presets. Try adjusting the preset's Channel Volume above "12:00" and saving again. This should level out the difference between the presets and eliminate the popping sound. Q: Will using different brands of 6L6 tubes in the Spider Valve Mk II void the warranty? A: Yes, so no Ruby, Mesa, GT, JJ, Tung-Sol, or others. The characteristic curves are not close enough, and the vacuum-to-gas ratio (soft, medium, hard) of the tube plays a role in that. So it’s best to use the specified Sovtek 5881WXT matched set tubes. Q: My amp seems to be malfunctioning. What can I do as an end user? Amp Troubleshooting Tube Troubleshooting and Replacement *Q: Where can I download a Spider Valve Mk II manual? Line 6 Manuals Miscellaneous Q: Where can I get a cover for my Spider Valve Mk II amplifier? Cases And Covers

Deutsch Français Application Q: Where are the song settings for the Spider IV 30 that I saw on the box? A: The Spider IV 30 song settings are a PDF download at the following link: Spider IV Settings Q: What are the amp models on the Spider IV 30? A: There are a twelve total amp models on the Spider IV 30. There are two versions (red and green) of the following amp models: Clean, Twang, Blues, Crunch, Metal, and Insane. Clean Red: Crisp, amazing clean tones. Clean Green: Based on a 1973 Hiwatt custom 100 with extended tone control range and tightened up the low end. Twang Red: based on mid 60’s Fender amps. Twang Green: based on vintage tweed amps (i.e.’53 Fender tweed Deluxe, ’58 Fender tweed Bassman and a ’60 Gibson Explorer). Blues Red: Three helpings of ’65 Marshall JTM-45, one scoop of ’58 Fender Bassman, a schmeer of ’63 Fender Vibroverb, and a dash of Supro for good measure. Blues Green: Based on a fawn Vox AC-30 amplifier with an updated and expanded tone control circuit. Crunch Red: Based on a '68 Marshall Plexi 50 Watt head. Crunch Green: Based on a ‘68 Marshall Plexi 100 watt with a few added extras; the combination of a Variac and jumpered input channels. Metal Red: based on the Mesa Dual Rectifier with enhancements. Metal Green: An aggressive high gain Amp Model with a unique Mid control that will sweep though an entire spectrum of tone on one knob. Insane Red: Line 6’s “dialed in for shreddingâ€� version of the Mesa Dual Rectifier red channel. Insane Green: You get an obscene helping of distortion, while still retaining tonal definition and character. The tone settings list numerous songs can be used to dial sounds in as well. If you would like to return your unit to the original presets, please perform a factory reset (see below). Q: How do I use the tuner on the Spider IV 30? A: Press the Tuner button, and notice the volume is muted during tuning. The amp model LEDs will indicate when the string you are playing is in tune. The 'Crunch' and 'Metal' LEDs will both light up when the string is in tune. If the Clean or Crunch LED are lit, the string is flat. If Metal or Insane LEDs are lit, the string is sharp. Once all your strings are in tune, press any button to exit Tuner Mode. Q: How do I perform a factory reset on the Spider IV 30? A: The factory reset procedure for a Spider IV 30 is to hold down the 'A' button as you turn on the power and hold the button for 5-8 seconds. Q: Are there any videos I can view to learn about the Spider IV series? Spider IV movies Q: How is the Spider IV 30 different than the Spider III 30? A: THe Spider IV 30 amp models have been expanded (from 4 to 12) and re-voiced, and the back is now a "3/4" style. See the FBV controller information for added control features below. Setup/Connections Q: What are the inputs and outputs on the Spider IV 30? A: Guitars, Microphones, Basses, and Acoustic Guitars can be connected using the 1/4" instrument input. MP3/CD players can be connected using the 3.5 mm jack. Headphones can be connected using the stereo ¼" output. Q: Is there a 'direct out' on the Spider IV 30? What can this be connected to? A: The headphones jack (a stereo ¼" output) can also be used as a recording output or into a PA or stereo system. You can connect an external preamp into the CD input or the Mic input of the Spider IV 30. Q: Can the Spider IV 30 and the CD/MP3 input be used at the same time? Will I hear both of these devices through the headphones? A: Yes Q: Can I use an FBV controller with the Spider IV 30? A: Yes, the FBV2 and FBV Express (original or Mk II) are recommended for use with the Spider IV 30. The FBV Shortboard (Mk I or II) may work (but is not supported) and will allow access the 'bonus' 36 presets by being able to switch between banks 1-9. Be aware that while most end users will not have a problem with the Shortboard connections, slight voltage fluctuations from your wall outlet may cause the Spider IV 30 to power cycle itself if the FBV shortboard is connected. If this happens, simply remove the FBV shortboard. Q: Does the Spider IV 30 have an effects loop? A: There is no effect loop on the Spider IV 30 amplifier. Specifications Q: How do I power the Spider IV 30? A: The Spider IV 30 uses a standard IEC power cable to a wall outlet. Q: How can I get a cover for the Spider IV 30? A: The Spider IV 30 does not have a cover available from Line 6 at this time. Registration/Warranty Q: What is the warranty on the Spider IV 30? A: the warranty on the Spider IV 30 is twelve months from the date of purchase. Line 6 Warranty Information Q: How can I register my Spider IV 30? product registration F.A.Q. Troubleshooting/Service Q: My Spider IV 30 seems to be malfunctioning. What can I do as an end user? Line 6 Amp Troubleshooting Q: Where can I get a cover or replacement knobs for my Spider IV 30 amp? Line 6 Store Wo kann ich die Song Einstellungen finden, die ich auf der Box gesehen habe? Die Spider IV Song Einstellungen können Sie heir als PDF Datei finden: Spider IV Settings Welche Verstärkermodelle sind auf dem Spider IV 30? Auf dem Spider IV 30 sind insgesamt 12 Verstärkermodelle installiert. Für die folgenden Modelle gibt es jeweils zwei Versionen, eine Green und eine Red Version: Clean, Twang, Blues, Crunch, Metal und Insane. Clean Red: Tolle, knackig saubere Töne. Clean Green: Auf Basis eines Hiwatt custom 100W von 1973 mit erweiterter Tonreichweite. Twang Red: Auf Basis von Fender Verstärkern der 60er Jahre. Twang Green: Auf Basis verschiedener Vintage Tweed Verstärker, ein 53er Fender Tweed Delxue, ein 58er Fender Tweed Bassman und ein 60er Gibson Explorer. Blues Red: Auf Basis eines 65er Marshall JTM-45, eines 58er Fender Bassman, eines 63er Fender Vibroverb sowie eines Supro. Blues Green: Auf Basis eines Vox AC-30 mit modifizierten Schaltkreisen. Crunch Red: Auf Basis eines 68er Marshall Plexi Topteils von 50W. Crunch Green: Auf Basis eines 68er Mashall Plexi 100W mit kleineren Extras. Metal Red: Auf Basis eines Mesa Dual Rectifiers mit Verbesserungen. Metal Green: Ein aggressiver High Gain Sound mit einzigartiger Mid Kontrolle. Insane Red: Line 6 Shred Version des roten Kanals eines Mesa Dual Rectifiers. Insane Green: Massig Verzerrung bei maximaler Definition. Wie benutze ich den Tuner des Spider IV 30? Drücken Sie den Tuner Knopf, der Verstärker sollte sich nun stumm stellen. An den Verstärkermodell LEDs können Sie dann erkennen ob die Saiten gestimmt sind. Wenn Crunch und Metal leuchten, dann ist die Saite gestimmt, leuchtet Clean oder Crunch dann ist Sie zu tief und wenn Metal oder Insane leuchten, dann ist Sie zu hoch. Wenn dann alle Saiten gestimmt sind können Sie irgendeinen Knopf drücken um den Tuner Modus zu verlassen. Wie kann ich das Gerät auf Werkseinstellungen zurückstellen? Halten Sie den A Knopf einfach für 5-8 Sekunden während des Startens des Verstärkers gedrückt. Gibt es Videos zur Spider IV Serie? Spider IV movies Was ist der Unterschied zwischen Spider IV 30 und Spider III 30? Der Spider IV 30 hat zusätzliche 8 Modelle und ist komplett neu gestimmt und der Verstärker ist nun im ¾“ Stil. Installation und Anschlüsse: Welche Ein- und Ausgänge gibt es? Gitarren, Mikrofone, Bässe und Akustikgitarren können Sie an den ¼“ Instrumenteingang anschließen, MP3 und CD Spieler an den 3.5mm Jack und Kopfhörer an den ¼“ Stereo Ausgang. Hat der Verstärker einen Direct Out? Der ¼“ Kopfhörerausgang kann als Ausgang für Aufnahmen verwendet werden oder an eine PA oder Stereoanlage angeschlossen werden. Einen externen Vorverstärker können Sie an den CD Eingang oder den Mikrofoneingang anschließen. Kann ich Instrument- sowie CD/MP3 Eingang gleichzeitig benutzen und das ganze auf meine Kopfhörer spielen? Ja. Kann ich einen FBV mit dem Spider IV 30 benutzen? Ja, FBV2 und FBV Express (original oder MkII) sind empfohlen. Das FBV Shortboard (MkI oder MkII) funktioniert eventuell und ist damit auch nicht unterstützt. Die meisten Benutzer haben mit dem Shortboard keine Probleme, Stromschwankungen können aber den Verstärker zum Abschalten bringen wenn das Shortboard angeschlossen ist. Wenn das passiert, trennen Sie das Shortboard einfach vom Verstärker. Hat der Spider IV 30 einen Effects Loop? Nein. Spezifikationen: Wie kann ich den Spider IV 30 mit Strom versorgen? Der Verstärker braucht ein ganz normales IEC Stromkabel. Woher bekomme ich eine Schutzhülle für den Verstärker? Line 6 stellt leider zurzeit keine Schutzhüllen für den Spider IV 30 her. Registrierung und Garantie: Wie lange habe ich Garantie auf den Verstärker? Die Garantie auf dem Verstärker beträgt 12 Monate ab Kaufdatum. Line 6 Garantieinformationen Wie kann ich mein Gerät registrieren? Produktregistrierung: F.A.Q. Fehlerbehebung und Service: Mein Spider IV hat Probleme, was kann ich tun? Line 6 Amp Troubleshooting Wo kann ich Ersatzteile für mein Spider IV 30 kaufen? Line 6 Store Ou puis-je trouver les configurations de chansons que j’ai vu sur la boîte ? Vous pouvez les trouver ici : Spider IV Settings Quels sont les modèles d’amplis sur mon Spider IV 30 ? Il y en a 12 modèles d’amplis en total. Les modèles suivantes ont deux versions (une version verte et une version rouge) : Clean, Twang, Blues, Crunch, Metal et Insane. Clean Red : Pour un ton brillant et clair. Clean Green : Basé sur un Hiwatt Custom 100 modifié de 1973. Twang Red : Basé sur les amplis Fender des années 60. Twang Green : Basé sur des amplis tweed vintage comme le Fender Tweed Deluxe de 1953, le Fender Tweed Bassman de 1958 et le Gibson Explorer de 1960. Blues Red : Une mixture de plusieurs amplis : le Marshall JTM-45 de 1965, un Fender Bassman de 1958, un Fender Vibroverb de 1963 et un Supro. Blues Green : Basé sur un Vox AC-30 avec circuit modifié. Crunch Red : Basé sur une tête ampli Marshall Plexi 50 Watt de 1968. Crunch Green : Basé sur un Marshall Plexi 100 Watt. Metal Red : Basé sur un Mesa Dual Rectifier avec quelques augmentations. Metal Green : Un modèle à gain élevé très agressive et une contrôle des Mis très spéciale. Insane Red : La version Shred de Line 6 d’un Mesa Dual Rectifier en canal rouge. Insane Green : Beaucoup de distorsion mais avec toute la définition tonale. Comment puis-je utiliser le Tuner sur mon Spider IV 30 ? Poussez le bouton Tuner, l’ampli est muet maintenant. Les LEDs des modèles amplis vous montrent si une corde est accordée. Crunch et Metal s’allument si la corde est accorée. Si Clean ou Crunch sont allumé, la corde est plat et si Metal ou Insane sont allumé, la corde est forte. Poussez n’importe quel bouton pour fermez le mode Tuning. Comment puis-je réinitialiser l’appareil ? Maintenez enfoncé le bouton A pour 5 à 8 secondes tout en allumant le Spider. Y a-t-il des vidéos pour le Spider IV ? Spider IV movies Quelle est la différence entre Spider IV 30 et Spider III 30? Vous avec plus de modèles de 4 à maintenant 12 modèles. Et l’arrière est maintenant ¾. Installation et Connexion : Quels entrées et sorties est-ce que je peux trouver sur le Spider IV 30 ? Vous pouvez connecter Guitares, Microphones, Basses et Guitares Acoustiques au connecteur instrument 1/4" ; les lecteurs MP3 et CD au jack 3.5mm et les casques à la sortie stéréo 1/4". Y a-t-il un Direct Out ? Vous pouvez utiliser le jack de casques comme sortie d’enregistrement et connecter un préampli externe à la sortie Mic. Puis-je utiliser l’entrée instrument en même temps que l’entrée CD/MP3 ? Pui-je écouter tous ça avec mes casques ? Oui, pas de problème. Puis-je utiliser un contrôleur FBV avec mon Spider IV 30 ? Oui, le FBV2 et FBV Express (originale ou MkII) sont recommandés. Le FBV Shortboard (MkI et MkII) peut fonctionner mais n’est pas supporté. Y a-t-il un Effects Loop ? Non. Spécifications : Comment puis-je allumer le Spider IV 30 ? Avec un câble standard IEC. Est-ce que je peux acheter une couverture pour mon Spider IV 30 ? Line 6 ne produit pas des couvertures à ce moment. Régistration, garantie : Y a-t-il une garantie avec le Spider IV 30 ? Oui, une garantie de 1 année. Line 6 Warranty Information Comment puis-je enregistrer mon Spider IV 30 ? Registration des produits Line6 Dépannage et Service: J’ai des problèmes avec mon Spider IV 30, qu’est-ce que je fais ? Dépannage des amplis Line6 Puis-je acheter des remplacements ? Line 6 Store

Application Q: What are the presets on the Lowdown 400/750 HD? A: The presets are available from the manual download section. If you would like to return your unit to the original presets, please perform a factory reset (see the Lowdown trouble shooting section). Q: Are there any video tutorials I can view to learn more about the Lowdown? A: Please see the Lowdown Movies in the product description page. Q: Is there an editing software that works with the Lowdown amplifier? A: No, there is editing software for the Lowdown series as there is no way to connect the lowdown amplifier to your computer. Q: Is there a "manual mode" so I can avoid the presets and just use the knobs on the amplifier? A: Yes, one you have selected your preset you want to run in manual mode, hit the preset again and the light will turn off, indicating you are in manual mode. Q: How do I change the tuner's reference frequency on the Lowdown? A: The Lowdown Tuner Reference Frequency cannot be changed - it's 440 all the way. Setup/Connections Q: Is there a direct out on the Lowdown 400/750 HD series amplifiers? A: Yes, there are balanced line level XLR outputs on the on the Lowdown 400/750 HD series. The line level XLR output is not affected by the output volume of the amplifier, and will send a cabinet simulated tone to your mixing console. Q: What if I do not want the cabinet tone but rather a unaffected tone (like a DI Box?) A: If you desire an unaffected bass tone, the Lowdown 400/750 HD series does have a quarter inch preamp output to send an unaffected tone to a mixer. Q: Can I use a Line 6 controller Lowdown 400/750 HD? A: Yes, we recommend using the FBV Shortboard with the Lowdown series. The FBV will work with the Lowdown series (although there will be numerous buttons that have no effect), and the FBV Express will not scroll through the banks. Q: Do the Lowdown 400/750 HD series amplifiers have an effects loop? A: No, none of the Lowdown 400/750 HD amplifiers has an effects loop. Q: Can I connect an external pre-amp (i.e. Line 6 POD unit) to the Lowdown 400/750 HD? A: Yes, an external preamp can be connected to the instrument input of the Lowdown, be sure to send an instrument level signal rather than a line level signal to avoid clipping and/or damage to the Lowdown. An external pre-amp can also be run into the MP3 input jack, which would relegate the Lowdown amplifier to a powered speaker. Q: How do I connect an external cabinet to a Lowdown 400/750 HD? A: The Lowdown 400/750 HD series has two (2) parallel Neutrik Speakon outputs to connect a single 4 ohm cabinet or an 8 ohm pair of cabinets. ***Connecting a single Line 6 LowDown cabinet (8 ohms) to the LowDown 400/750 HD single 4 ohm output cuts the power output to the cabinet in half. 375 watts from the LowDown 750 HD, and 200 watts from the LowDown 400 HD. Specifications Q: What's the rated wattage output of the Lowdown 400/750 HD series?? Lowdown 400 HD: 400 watts Lowdown 750 HD: 750 watts Q: What are the presets for the Lowdown amps? A: LowDown Preset Chart (Rev A) - English.pdf Registration and Warranty Information Q: What is the warranty on the Lowdown Series? A: the warranty on the Lowdown series is twelve months from the date of purchase. Q: How do I register the Lowdown? Product Registration F.A.Q. Troubleshooting/Service Q: How do I perform a factory reset on the Lowdown? A: The reset procedure for a Lowdown amplifier is to hold the A button for 5 seconds while powering the amp. Q: My amp seems to be malfunctioning. What can I do as an end user? Line 6 Amp Trouble Shooting Q: Where can I get replacement knobs/logos for my Lowdown amplifier? Line 6 Store Q: Where can I download a Lowdown amplifier manual? Line 6 Manuals

Application Q: What are the presets on my Spider Valve amplifier? A: The user presets and artist/song presets for the Spider Valve are listed as attachments at the bottom of this document (please be aware that they are identical to the Spider III with the exceptions notated in the document). The Spider Valve user presets are the 36 user-programmable presets. The artist/song presets location cannot be saved, but you can modify and/or store these setting in the 36 user-programmable presets. If you would like to return your unit to the original presets, please perform a factory reset. Q: I noticed that some of the Artist/Song Presets from the Spider III are not present on the Spider Valve? A: Yes, some of the Artist/Song Presets from the original Spider III release were not included in the Spider Valve release due to space restrictions (please compare the two lists for clarification). Q: Are the Spider Valve series amps Mono(phonic)? A: Yes, the Spider Valve series amplifiers have a monophonic output (as are most tube amplifiers). Q: How can I connect a POD unit to my Spider Valve series amplifier? Connecting to Amps and Computers, Output Settings, Floorboard Compatibilty, Fletcher Munson, Multiple Amps Q: Do the Master volume and presence control applied to the power amp section only? A: Yes, the master volume and presence control are true analog. Q: Where is the Master volume located in the chain? A: it is after the preamp, and before the power amp. Specifications Q: What speakers are used in the Spider Valve amplifiers? Spider Valve 112: Celestion Vintage 30, 8 ohm Spider Valve 212: (2) Celestion Vintage 30s, 16 ohm Spider Valve 412 cabinet: (4) Celestion Vintage 30s, 16 ohm Q: What tubes ship in the Spider Valve amplifiers? What is the power output? Spider Valve 112: (2) Sovtek 12AX7LPS preamp tubes, (2) Sovtek 5881/6L6WXT power amp tubes. 40 watts. Spider Valve 212: (2) Sovtek 12AX7LPS preamp tubes, (2) Sovtek 5881/6L6WXT power amp tubes. 40 watts. Spider Valve HD: (2) Sovtek 12AX7LPS preamp tubes, (4) Sovtek 5881/6L6WXT power amp tubes. 100 watts. Q: What are the function of the 12AX7 tubes? A: V1 is the booster to the output tubes, V2 is the phase inverter for the output tubes. When viewing the amplifier from the back, V1 is on the left side on the combo and the right side on the head. Q: Can the SV handle another 12A_7 style tube without damage to tubes or circuitry? A: Yes, but as these tubes act as a phase inverter and a boost to the power amp (rather than traditionally "cleaning up" the preamp section), you may not get the result you are looking for. Q: What Line 6 controllers work with the Spider Valve series amplifier? Controller compatibility chart Setup/Connection Q: Is there a bias switch to change the power tubes to EL-34s or other power tube types? A: No, the Spider Valve does not offer bias switchable options and was designed to only be used with 6L6 power amp output tubes. Q: Is the effect loop series or parallel? Is the effect loop mono or stereo? A: The effect loop is series mono. Q: Is there a headphone output on the Spider Valve series? A: There is no headphone output on the Spider Valve Series, but you can use the XLR output to go to a mixer, then use the headphone jack from the mixer. Q: Can I run my Spider Valve amplifier without a speaker load? A:No, you cannot run the Spider Valve series without a speaker load. Please see the following link for more information on cabinet connections: Cabinet Connection and Ohm F.A.Q. Q: Can the Spider Valve be run with a Variac? A: This is not recommended as the lower voltage can cause problems with the digital processing in the Preamp section of the Spider Valve. Q: Can I run a Palmer S.E., THD Hot Plate, Power Soak, etc. for speaker simulation or power attenuation? A: There are no known issues regarding the use of any direct recording simulators or power attenuators between the power amp output and the speaker cabinet, but if there is damage caused by improper connections or malfunctioning gear it will not covered under the Line 6 warranty. Q: Do the 112 and 212 combos support external speaker cabinets? If so, will the external cabs mute the internal speakers of the SV? A: Yes, the Spider Valve supports the use of additional cabinets. Please ensure that the ohm load is correct to avoid damaging your amplifier. Q: What is the bias voltage for the 6L6 tubes? A: 35 ma (or mv) Q: Does the XLR output still send signal when the amplifier is on standby? Is there an FX loop? MIDI ports? A: The XLR Direct Out (which is a POD-style output with speaker simulation) will function when the amplifier is in standby mode.The Spider Valve has a pre-amp out (effect send) and Power amp in (effect return) section. There are no MIDI ports on the Spider Valve series. Q: What do the FBV shortboard stomp, FX Loop/Function 1, and Function 2 do? A: The Stomp button activates the "boost" on both the original (Mark I) and Mark II shortboard. The FX Loop (Mk I)/Function 1 (Mk II) activates the Noise gate. The Function 2 (Mk II only) has no function on the Spider Valve. Q: Does the FBV controller (long board) work any differently that the other FBV controller switch the Spider Valve series? A: The FBV controller (long board) work just like the other controllers, but there are numerous buttons that will have no functions, such as the Stomp 2/3 buttons, tremolo, and favorite channel. Q: Where is the fuse located in the chain? A: The fuse is located between the 12AX7s and 6L6s (there is no "master" fuse). Spider Valve Cabinet FAQs Q: What are the specs for the 4x12 cabinet? A: 9 ply, ¾" wood with Celestion Vintage 30 speakers. There is no ‘internal baffle`. Q: What are the ohm load options for the 4x12 cabinet? A: The switchable ohm load options for the 4x12 cabinet are 16 ohm mono, 8 ohm stereo, and 4 ohm mono. Trouble shooting: Q: What is the manufacturer’s warranty for SV? A: The warranty for the Spider Valve amplifier is 12 months from the date of purchase, the tubes are warrantied for 90 days from the date of purchase. Q: How do I perform a factory reset on my Spider Valve? A: The factory reset for the Spider Valve series is to hold the "A" button while powering the unit. Q: Will using different brands of 6L6 tubes in the Spider Valve void the warranty? A: No, feel free to experiment with other tubes of the same type. Q: My amp seems to be malfunctioning. What can I do as an end user? Amp Troubleshooting Tube Troubleshooting and Replacement *Q: Where can I download a Spider Valve manual? Line 6 Manuals Miscellaneous Q: Where can I get a cover for my Line 6 amplifier? Cases And Covers Q: In the manual's explanation of how to save patch and perform 'NAME EDIT' with the FBV shortboard: Page 45, it states to use the 'COMP' & 'MOD' button to select one of the characters of the channel name. I don't see a COMP button, what should I use? A: Please use the 'STOMP' & 'MOD' button to select the characters from left to right. This was an error in the manual due for revision. Spider Valve Preset Patches.pdf

Francais. Deutsch. If you are having trouble with your Line 6 amplifier, please check the following points before taking your amplifier to your local Authorized Service Center: Q: I am noticing that I am getting volume/tone changes when playing at a high volume? A: Try "parking" the knobs (except master volume) at 100% to ensure that the knobs are not moving to the "current" location rather than the preset location. Recall a preset once the knobs are parked to ensure the tone you are working with is a preset rather than the current knob position. Q: My master volume has almost no change past 6? A: This is due to the volume pot installed on all Line 6 amplifiers. A solution to this would be to replace it with an "audio" pot, but this modification wouldn't make it louder - just smoother. Line 6 originally installed audio pots on the AXSYS, but players didn't like them because they made the amp feel "wimpy". Players also did not like the fact that they had to turn the amp up to about 4-5 before it would start "happening" and 7-8 on the gig. Even though there was still a good amount of headroom, player feedback was that they preferred the amplifier with the traditional volume pot, so that is the style used with Line 6 amplifiers. - Perform a factory reset of the unit: Factory Reset Procedures Volume and Signal Troubleshooting - turn off other volume controls not being used (i.e. volume trim pots) - Ensure there is no debris in the CAT-5 or input jacks. - Unplug all other units from the audio chain, as well as any CAT-5 cables and controllers. - Use a high-quality cable you know is functional (i.e. works in a different application) directly into the instrument input, bypassing all other effect units. - Ensure that the guitar/bass is outputting signal. Try the amplifier with another instrument you know is functional (if possible).Make sure all the input and output jacks are tight. Check the instrument with different pickup settings to make sure it is not a bad pickup connection. - Ensure that both the positive (white) and negative (black or red) wires are fully connected to the speaker, and that the speaker output from the amplifier is plugged into the correct jack (when applicable). - Check the effects loop (if the amp has one). If you're not getting any signal, try plugging into the RETURN side of the loop to see if there is any output. Likewise, with a source feeding the input, plug the SEND into another line level device to see if you're getting signal. Tone and Rattle Troubleshooting - Check the make sure all buttons on the unit are not stuck - Be sure that all screws on the unit (handle, corners, baffle boards, speakers) are snug. - Ensure that there are no foreign objects (i.e. silicon packs) stuck in the speaker enclosures Q: Are the tone controls on the on a Line 6 amplifier passive or active, and where is the "flat" level? A: Each amp model is different, and the controls behaves like the target amp. Most tube amplifiers will have a passive tone stack with makeup gain. Line 6 tone stacks are designed to behave just like the modeled amp (both the good and the not so good). Some amplifier tone stacks are the closest to flat when set B-0, M-10, T-0, but it is different for each model. Power Troubleshooting - Ensure that there is sufficient power coming from the power outlet into the amplifier. Try a different circuit to ensure there is not a power issue at the outlet. - Make sure that the both ends of the power cable are snug in their sockets. Tube Amplifiers Troubleshooting - Make sure the tube is firmly seated in the tube socket. - If the tube(s) make a popping sound accompanied by intermittent light from tubes, the tube is failing and needs to be replaced. - If there is "white frost" inside the tube, the tube has cracked and it must be replaced. - If there is a "tube" ringing (not due to loose screws), there may be a failing tube. Replace the 12AX7s individually and the matched 6L6 pairs to determine if a tube has failed. Replacing Tubes - Always replace power amp tubes with matched set(s) every 12-24 months depending on the amount of use, and have the bias checked and/or adjusted by an authorized Line 6 Service Center. - Preamp tubes (such as the two 12AX7s) only need to be replaced when they are microphonic (ringing sound from tubes when tapped), noisy, or damaged. Replacing tubes should be done a Line 6 authorized service center. The digital stage and analog tube stages communicate with one another, and so are not like the all analog tube (valve) amps from the 1960's and 70's. As a result, one cannot swap tubes out like in the old days. So please use the following specified tubes (valves) when the amp is taken to a service center. For Spider Valve series amps use the following specified tubes, 12AX7B China for pre-amps. 5881WXT Sovtek (matched pair), with the base cup bottom. 5881WXT Sovtek (matched quartet), with the base cup bottom for the HD-100 and HD100 MkII. For the Alchemist series amps use the following specified tubes, 12AX7EH Electro-Harmonix low microphonic for V1-3 pre-amp positions. 12AX7AC5HG Ruby Tube HG-High Gain for V4. 12AX7B China for V5. 6L6GCMSTR Ruby Tube (matched pair) power amp. For the DT50 series amps use the following specified tubes, 12AX7EH Electro-Harmonix approved for the DT50 pre-amps. EL34EH Electro-Harmonix (matched pairs) for the power amps. For the DT25 series amps use the following specified tubes, 12AX7EH Electro-Harmonix approved for the DT25 pre-amps. EL84EH Electro-Harmonix (matched pairs) for the power amps. Visit your local Line 6 Service Center for servicing a tube amp, as these have High Voltage Shock Hazards. Product Repair Si vous avez des problèmes avec un des amplis Line 6, vérifiez les points suivants avant de retourner l’ampli. J’ai des changements de son si je joue à un volume très fort. Pourquoi ? Laissez tous les boutons sur 100% excepte le Master Volume pour assurer que le bouton ne tourne pas à la position courante mais à la position du preset. Démarrez un preset pour assurer le ton est le propre. Presque rien ne se passe si je tourne le Master Volume passe 6, pourquoi ? C’est à cause du potentiomètre installé dans les amplis Line 6. On pouvait installer un potentiomètre audio qui ne changerait pas le volume. Line 6 a essayé d’installer des potentiomètres audio mais les joueurs ne l’ont pas aimé. Dépannage de volume et signal : Éteignez les autres contrôles volumes comme les potentiomètres Volume Trim. Assurez qu’il n’y en a pas du débris dans les jacks CAT-5 ou entrée. Débranchez tous les autres appareils de la chaine audio aussi bien que tous les câbles CAT-5. Utilisez un câble que vous savez qu’il fonctionne directement dans l’entrée, contournant les effets. Assurez-vous que la guitare ou basse produit un signal. Essayez un autre instrument que vous savez fonctionne. Vérifiez tous les jacks d’entrée et sortie. Essayez l’instrument avec autres micros pour vérifier que ce n’est pas un micro défectueux. Vérifiez les câbles blanc et noir ou rouges connectés au haut-parleur. Vérifiez la sortie du haut-parleur du ampli est branché correctement. Vérifiez la boucle d’effets, si vous ne recevez aucun signal, branchez le dans le RETURN. Avec une source dans l’entrée, branchez le SEND dans le Line In d’un autre appareil pour vérifier le signal. Dépannage hochet et ton : Vérifiez si un des boutons et collé. Toutes les vis doivent être serrées. Assurez vous qu’il n y en a aucun objet étranger dans haut-parleurs. Est-ce que les contrôles sur l’ampli Line 6 sont passifs ou actives ? Et ou est le niveau « flat » ? Tous les modèles sont différents et les contrôles changent pour chaque modèle. La plupart des amplis à tubes sont passives. Le ton des amplis Line 6 sont conçus pour se comporter exactement comme l’ampli modelé. Quelques modèles sont très près de « flat » sur B-01, M-10 et T-0 mais c’est différent pour chaque modèle. Dépannage alimentation: Assurez-vous qu’il y en a assez de courant pour l’ampli. Vérifiez lé prise de courant. Vérifiez le câble et les connecteurs. Dépannage des amplis à lampes : Vérifiez que le tube est bien assis dans la douille. Si le tube fait des sons popping avec de la lumière intermittente. Vous devez remplacer le tube. S’il y en a de gelée blanche dans le tube, vous devez le remplacer. Si le son sonne c’est possible qu’un des tubes est défectueux, remplacez les tubes individuellement. Remplacement des tubes : Remplacez les tubes tous les 12 à 24 mois selon l’usage. Et laissez vérifier/ajuster le Bias d’un centre service Line 6 autorisé. Les tubes de préampli doivent uniquement être changés s’ils sont microphoniques endommagés ou bruyant. Si vous avez des problèmes après toutes ces suggestions, veuillez visiter un centre service Line 6 s.v.p. mais n’oubliez pas la preuve d’achat si vous êtes dans les 12 mois de garantie. Réparation des produits Sollten Sie Probleme mit Ihrem Line 6 Verstärker haben, dann überprüfen Sie bitte erste die Folgenden Punkte bevor Sie sich an ein Line 6 Service Center wenden: Ich kann Ton/Lautstärkeänderungen feststellen wobald ich sehr laut spiele, woher kommen diese? Stellen Sie die Knöpfe, abgesehen vom Master Volume auf 100% um sicherzustellen, dass diese sich nicht zur derzeitigen Position bewegen sondern auf der Position des Presets bleiben. Starten Sie dann ein Preset um zu überprüfen ob der Ton der des Presets und nicht der der derzeitigen Position des Knopfes. Mein Master Volume verändert die Lautstärke beinahe nicht nach 6, warum? Dies liegt am installierten Potentiometer, Line 6 hat in frühen Modellen mal einen Audio Potentiometer ausgetestet aber den Spieler gefiel dieser nicht. Lautstärke und Signalproblembehebung: Schalten Sie andere Lautstärkeregler ab (Trim Pots zum Beispiel). Stellen Sie sicher, dass kein Dreck im CAT-5 Eingang oder anderen Jacks ist. Entfernen Sie alle anderen Geräte und Cat-5 Kabel aus der Kette. Benutzen Sie ein Kabel, von dem Sie wissen dass es funktioniert und schließen Sie es direkt zwiscen Gerät und Instrument, umgehen Sie so alle zusätzlichen Effekte. Stellen Sie sicher, dass Ihr Isntrument ein Signal abgibt. Versuchen Sie falls möglich ein anderes Instrument von dem Sie wissen, dass es funktioniert. Versuchen Sie unterschiedliche Tonabnehmereinstellungen. Stellen Sie sicher, dass das weiße sowie das schwarze bzw. rote Kabel korrekt an den Lautsprecher angeschlossen sind. Überprüfen Sie außerdem den jack des Lautsprechers. Überprüfen Sie den Effects Loop, falls vorhanden. Wenn Sie kein Signal bekommen, dann versuchen Sie diesen in den RETURN zu stecken um zu sehen ob Sie ein Signal bekommen. Genauso sollten Sie auch den SEND in ein anderes LINE IN Gerät stecken. Ton und Rassel Probleme: Überprüfen Sie alle Knöpfe um zu sehen ob einer feststeckt. Überprüfen Sie ob alle Schrauben fest angezogen sind. Stellen Sie sicher, dass keine unerwünschten Objekte im Kautsprecher sind. Ist die Tonsteuerung aktiv oder passiv? Und wo ist die flach Einstellung? Jedes Modell ist unterschiedlich und die Steruerung des Verstärkers verhält sich so wie die des modellierten Verstärkers. Manche Modelle sind sehr flach, wenn sie auf B-01, M-10 und T-01 eingestellt sind, dies trifft aber nicht unbedingt zu da dies auch unterschiedlich ist zwischen den verschiedenen Modellen. Röhrenverstärker Problemlösung: Stellen Sie sicher, dass die Röhren fest im Sockel sitzen. Sollten die Röhren ein Poppen machen und dazu unterbrochen leuchten, dann ist diese kaputt und muss ersetzt werden. Falls weißer Frost in der Röhre ist, dann hat diese en Loch und muss ebenfalls ersetzt werden. Sollte ein Röhre klingeln, könnte es sich auch um eine kaputte Röhre handeln. Ersetzen Sie dann die Röhren einzeln um festzustellen, welche kaputt ist. Röhren ersetzen: Lassen Sie Röhren immer mit passenden Sets alle 12 bis 24 Monate je nach Nutzung ersetzen und lassen Sie den Bias von einem autorisierten Line 6 Service Center überprüfen bzw. anpassen. Vorverstärker Röhren brauchen erst dann ersetzt zu wernden, wenn sie mikrofonisch oder rauschend klingen bzw. beschädigt sind. Sollten Sie dann immernoch Probleme mit dem Verstärker haben besuchen Sie bitte ein Line 6 Service Center. Vergessen Sie aber nicht den Kaufbeleg falls Sie sich noch in den 12 Monaten der Garantie befinden. Produktreparatur

Note: The Spider III was released in 2006 and discontinued in 2010. The Spider III is now listed as a Legacy Product. Q: How are the Artist preset banks categorization and alphabetized? A:When looking at the list of the banks in the unit, the banks seem to be broken into four different sections: 1. Albert Lee - Julien K 2. Ash - Volto 3. The Accident Experiment - Thursday 4. Songs 50's - Misc. Fun Each of the first 3 sections (artist banks) is alphabetized. Is there a reason all the artist presets overall aren't alphabetized? The artist banks are categorized by Clean, Dirty and Heavy: 1. Albert Lee - Julien K: Cleaner patches 2. Ash - Volto: Midgainy patches 3. The Accident Experiment - Thursday: Heavily overdriven patches Q: How do I perform a factory reset on my Spider III? Line 6 Device Factory Reset Procedures Q: How do I use the compare mode (to find where the knobs were originally set)? A: Press and hold the Tap button, then turn the Amp Models knob. This activates Spider III's "Compare mode". Now turn any knob other than Amp Model and Master Volume, and the channel lights will tell you whether you need to turn that knob up (Channel A lights) or down (Channel D lights) to match the stored setting. The Channel B & C lights will be lit at the same time once the knob position matches the stored setting exactly. Q: How do I connect the Spider III HD 150 to the Spider Cabinet? A: The Spider III HD 150 is designed to see a load on *both * speaker outputs by connecting the left and the right inputs to the Spider cabinet with speaker cables. Running the Spider III HD 150 into a 4 ohm load may result in damage to the amplifier. Please see the following link for more information: Cabinet Connection and Ohm F.A.Q. Q: Can I use two Spider III cabinets with the Spider III HD 150? A:The Spider III HD 150 was designed to power a single Spider III Stereo Cabinet with a stereo 8 ohm load. Using two Spider III cabs would require a modification to each cab so that they are each rewired to produce a 8 ohm mono load. This modification would preferably be done by an authorized Line 6 service center, which can be located from the Service Center link on the Support page. Q: How do I connect external speakers to my Spider III 150 amplifier? A: You will need to disconnect the internal speakers (covering the dry-solder clips with electrical tape) and connect both external speaker outputs to an 8 ohm (or higher) load. Do not connect just one side, as this may cause a power amp failure. Powering the internal speakers along with a external speakers may cause a power amp failure and is not supported. Q: What type of speaker is used on the Spider III combo series? Spider III 15: Custom 15 (4 ohm) Spider III 30: Celestion G12E50 (4 ohm) Spider III 75/150: Celestion G12P80 (8 ohm) Spider III 120:(2) Celestion G10P80 (8 ohm)

Note: The AX2 and Axsys amplifiers are discontinued and now listed as a Legacy Product. Application Q: Where can I get the presets for the AxSys amplifier? A: The Axsys presets are available in .JPG format and can be downloaded from the attached document at the botton of this document. Q: Which Line 6 controllers are compatable with the Axsys/AX2? A: The Line 6 Floorboard and the FB4. See the following link for more information: Line 6 Floorboard and FB4 F.A.Q. Q: Can the stomp box modelers be used with the AX2? Is there much duplication between the stomp boxes and the AX2 (ie, if they can be used together, am I opening up a whole new range of possibilities or just doubling up on functions I already have? A: Line 6 Stomp Boxes will work great with the AX2. The effects in the AX2 are completely different than the effects in the Stomp Boxes. The effects in the AX2 are for the most part just generic effects, where the effects in the Modelers are modeled after classic effect devices used by everyone from Hendrix to Van Halen. Q: How do I adjust my tuner reference frequency back to 440Hz? A: While in tuner mode, turn the MIDDLE knob on your amp or POD. This will allow you to select a tuning reference frequency anywhere from 436-445Hz. Q: How can I change the volume level of the tuner on my AX2/Axsys? A: While in tuner mode, simply turn the CHANNEL VOLUME knob to the desired level. This will set your tuner level without effecting the other channels of your AX2/Axsys. Q: It is possible to control the reverb level of the AX2 with the wah pedal of the Line6 floorboard? A: It is possible to control the reverb level of the AX2 with the wah pedal of the Line6 floorboard. There are several parameters of the AX2 User preset that must be adjusted properly for this to be implemented. Here are the settings: Reverb row / reverb level set to 0 Main row / Delay/reverb knob set to 90. Wah row / wah type set to 5.18. Wah row / wah depth set to 99. Increasing the Reverb row / reverb level setting will adjust the wah pedal minimum reverb level. Decreasing the Wah row / wah depth setting will adjust the wah pedal maximum reverb level. Q: How can I make my own personal patches? A: To make a custom set up of factory patches, simply call up the patch you want, hit "save" (the display will flash), then use the "Bank up/Down" and "Channel select" buttons to choose the location you want that patch to be in. (See pages 4*3, 5*10 and 9*1 in the AX2 manual) Q: What MIDI control functions can I access using the AX2? A: The AX2 Manual on Page 6.6 details the functions of the AX2 that may be assigned for continuous control by the Wah pedal. There is also an AX2 MIDI sysex document that details all of the functions that can be controlled using external MIDI controllers. Q: How can I get a good direct output from my AX2/Axsys? A: Unlike the Flextone, where the speaker compensation is done in the analog world, the AX2/Axsys cabinet emulation is done in the digital world. Because of this, when the speaker emualtion is on, it is going to be present in the direct outs as well as the speaker outs. For AX2/Axsys users, one solution can be to use a pair of analog boxes (like a Hughes & Kettner Red Box or a Digital Music Cab Tone Dual) to feed the PA in live situations and then use the AX2/Axsys compensated direct out for recording purposes only. There is another inexpensive and simple solution to the line out/speaker compensation issue. Many users find that when the speaker compensation is activated, the sound of the AX2/Axsys speaker is not objectionable but simply too dark (there needs to be more treble in the sound) while the amps direct out sounds great through the PA. It is possible to simply feed a little of the direct sound through your vocal monitor and then have some of the low end rolled off. You can achieve this by "Y'ing" the AX2/Axsys direct output into two mixer channel line inputs and using the second channel to EQ your personal monitor feed. This allows you to use the first mixer channel to send the full range AX2/Axsys direct sound through the main house sound system. Then, send the separately EQ'ed sound from the second mixer channel to your vocal monitor. The sound that comes through your vocal monitor is "tinny", but when it gets mixed in with the "bassy" sound of the AX2/Axsys speakers, the resulting sound is pretty well balanced. You may also find that there is also an added depth to the sound similar to running a bi-amped bass guitar rig. You can also apply this concept of Y'ing the direct out to connect to another amplifier other than your vocal monitor. You can use another combo amp or a "Hot Spot" type monitor. You may also find that adding external effects to the "monitor" feed gives you some extra sound processing possibilities. Q: It is possible to control the delay level of the AX2 with the wah pedal of the Line6 floorboard? A: There are several parameters of the AX2 User preset that must be adjusted properly for this to be implemented. Here are the settings: Delay row / delay level set to 0 Main row / Delay/reverb knob set to 90. Wah row / wah type set to 5.12. Wah row / wah depth set to 99. Increasing the Delay row / delay level setting will adjust the wah pedal minimum delay level. Decreasing the Wah row / wah depth setting will adjust the wah pedal maximum delay level. Set up Q: If I only run one speaker on the amp (AX2 212 upgrade) Will I still get the full stereo signal (i.e. the rhythm of the delay will be the same)? If I DI the AX with a mono cable into the PA will I also get stereo delay in a mono? A: You will get only 1/2 of the signal from the amp if you run one speaker. You will still get stereo out of the direct output. You will get mono out of the amp if you use a mono cable. It can be a complicated matter to run a direct output from an amplifier to a live sound system and simultaneously monitor that amplifier's internal speakers on stage. The issue of the cabinet emulation on the AX2 is somewhat more complex than it looks at first glance, since unlike the Flextone, where the speaker compensation is actually done in the analog world, on the AX2 it's done in the digital world and, because of hardware limitations, can't be both present (at the direct out) and not present (at the speakers) at the same time. To do so would require adding additional A/D conversion and a divergent data path, neither of which is a software solution, or an inexpensive, ungradable hardware change. The AX2 design was never intended to have both in simultaneous use. Was it a bad design decision? Maybe, but hindsight is always 20/20, and all of our products are being used in ways that transcend their original design, for good or ill. For AX2 users, one solution can be to use a pair of analog boxes (For example, I have a H&K Red Box and a Digital Music CabTone Dual-lok'd to the inside of my AX2 cabinet) to feed the PA in live situations and use the compensated direct out only for recording purposes. Not the most elegant solution, but a very usable and portable one. There is another cheap and simple solution to the line out/speaker compensation issue. Many users find that the sound of the AX2 speakers, when speaker compensation is activated, is not objectionable, but is simply too dark. There needs to be much more treble in the sound. The direct out sounds great through the PA. You can simply feed a little of the direct sound through your vocal monitor. Have the low end rolled off my personal monitor sound. (you can achieve this EQ setting by "Y'ing" the AX2 direct output into two mixer channel line inputs and using this second channel only to EQ your personal monitor feed). This allows you to use the first mixer channel to send the full range AX2 direct sound through the main house sound system and to other players' vocal monitors. Then, send the separately EQ'ed sound from the second mixer channel to your vocal monitor. The sound that comes through your vocal monitor is "tinny", but when it gets mixed in with the "bassy" sound of the AX2 speakers, the resulting sound is pretty well balanced. There is an added depth to the sound, similar to running a bi-amped bass guitar rig. We realize that this solution is not superior to having separate control of all AX2 amp outputs, but it works without having to spend the extra money on external speaker emulation devices. We hope this solution gives you one more option that may help you get a better monitor sound, in some situations. You may also be able to apply this concept of Y'ing the direct out to others amplifiers than your vocal monitor. You might be able to use another combo amp or a "Hot Spot" type monitor. You may also find that adding external effects to "monitor" feed gives some extra sound processing possibilities. Q: Can the AX2/Axsys power an external speaker cabinet? A: Yes, an external cabinet can be connected to the AX2/Axsys by disconnecting the existing Axsys speakers and connecting the extension cabinet. The speaker outputs of the AX2/Axsys must be connected to an 8ohm or 16ohm load. Do not use a 4ohm load, as it will cause the amp to overheat. Q: How do I record with the AX2/Axsys line out? A: The LINE OUT/HEADPHONE jack of the AX2/Axsys is a stereo output so we suggest that you use a "Stereo TRS" (Tip/Ring/Sleeve) jack to take advantage of the stereo output. A TRS jack is basically a stereo jack much like the jack on the end of your stereo headphones. You can use a mono or guitar cable in the LINE OUT/HEADPHONE output but you will only get one side of the stereo field. Set the Master Volume at 2-1/2 or lower to get a line level output that won't overdrive your mixer input. Remember that you can unplug the AX2 speakers when recording so that you don't have to have the amp playing in the room. If you need to have the amp playing in the room at a higher volume than 2-1/2, you may need to use an external 20 dB pad to bring the level of the signal going to the mixer back down to a usable level. See page 5*15 in the AX2 manual for more details Q: Can I adjust the STEREO LINE OUT/HEADPHONE level of my AX2/Axsys? A: In order to have the desired AX2/Axsys stage volume but not overdrive the input of the mixer, an external 20dB pad can be placed between the LINEOUT of the AX2/Axsys and the input of the mixer. Most mixing consoles already have a 20dB pad built in, but if necessary, an inexpensive outboard unit can be purchased. Rolls manufactures one called the DB25 Matchbox. It doubles as a direct box and a pad and should work great in this situation. Specifications Q: Is the Aux input on the AX2 unbalanced mono or stereo? A: The Aux input of the AX2 is unbalanced mono. The mono sound will be sent to both sides of the stereo output. Troubleshooting Q: How do I reset the Axsys/AX2? A: The factory reset for the Axsys 212 or AX2 is to hold down the USER PRESET and the SAVE (or STORE SOUND) buttons. Q: I have been getting a loud noise when switching from preset 01 on channel "A"? A: Please try a hard reset of your AX2/Axsys. Q: I am receiving a "lo batt" error message. What should I do? A: This message is an indication that the battery is not going to be with us much longer. We use lithium batteries in the AX2/Axsys in order to store the user presets, a common replacement is the Panasonic BR2325-1HG. The current battery will need to be de-soldered and replaced with a new battery. If you are not confident in doing this replacement, it should be performed by an authorized Line 6 Service Center. Q: I'm having a hard time getting my clean sounds really clean on my AxSys/AX2. Is there something that I can try? A: Always remember that there are many different places where you can increase or decrease gain on the AX2/AxSys. If you've chosen to increase it in all (or even most) of these places, you could be causing clipping after the TubeTone modeling. One of the most likely places for this to happen is in the Graphic EQ. A quick test is to turn the EQ off and see if your sound cleans up. If it does, move your whole EQ curve down so that your highest frequency boosts are no higher than +6. A general troubleshooting procedure to find where you might be getting unwanted clipping is to turn off all the effects, make sure that the sound is clean, then turn the effects back on, one at a time, checking for clipping after turning on each one. Q: I just upgraded to AX2 and my presets are changing radically every time I touch a knob. What's going on? A: The AX2 defaults to an 'immediate' editing mode in which the sound will instantly reflect the knob settings (i.e. when you change a knob, the sound changes immediately). You're used to the older 'capture' mode editing of the AxSys 212, where you had to move a knob to the position of its stored setting before you could change the setting. You can put the AX2 into the older editing mode by holding down the Main Row Edit Select button while powering up the amp. This setting is stored with the other Global settings, and you'll never have to think about it again unless you do a reset of the amp. (See page 2-2 of the manual) Q: I turned up the Delay/Reverb level in the Main Row, but I don't hear any reverb or delay? A: Make sure that the Delay and/or Reverb is turned on in the FX On/Off Edit Row or at the Floor Board. Still nothing? Remember that the individual Delay and Reverb Level controls in their respective Edit Rows have to be turned up as well. Q: The Axsys amplifier may make a crashing noise when switching between two presets that have Reverb or Delay on them? A: The Axsys amplifier may make a crashing noise when switching between two presets that have Reverb or Delay on them. The Axsys may also make a crashing noise when switching from a preset that uses the Acoustic Simulator to a preset that uses a non-Acoustic Simulator amp model with Reverb or Delay. There are several things that can be done to eliminate or minimize this noise. If the presets that are selected do not have any Reverb or Delay on them, the noise will be eliminated. It is possible to have Reverb or Delay pre-programmed into a preset but have the effects turned off. Then, after the preset has been selected using the EFFECTS ON/OFF foot switch function to activate the Reverb or Delay. This will eliminate switching noises at the time of the preset change. It is also possible to program the presets to minimize any noises that may occur during switching. The "SPRING" reverb model is the most likely to cause noises. Using another reverb model such as "DARK HALL" will lower the level of the noise. Maintaining a similar "reverb level" on the presets that are selected will also help to minimize this switching noise. There are three parameters that adjust the "reverb level" on the Axsys. The REVERB ON/OFF setting in the FX ON/OFF row, the REVERB LEVEL setting in the REVERB row and the REVERB/DELAY setting in the MAIN row. Q: Why is it that when the Axsys receives "MIDI program change messages", it will remain in the PRESET BANK or USER BANK it is set to at the time that the message is received? A: The Axsys will receive "MIDI program changes" via its MIDI IN jack and then follow with the preset changes outlined on page 10.4 of the Axsys owners manual. When the Axsys receives a "MIDI program change message" it will remain in the PRESET BANK or USER BANK it is set to at the time that the message is received. The Axsys will need to receive a "MIDI bank change message" in order to scroll to a different BANK. To toggle between the USER and PRESET BANKs, the user must press the USER/PRESET button on the front panel of the Axsys. Many MIDI foot controllers proceed their program change commands with bank change information. This is especially common in Roland controllers. This function will need to be defeated for these controllers to work properly with a Line6 product. Q: My amp seems to be malfunctioning and I have done the factory reset and checked the amp trouble shooting document. What can I do as an end user? Line 6 Amp Trouble Shooting Q: When I change to my acoustic simulator sound from a distortion I get a loud sound? A: That noise that you're hearing is the sound of the Reverb and/or Delay trailing off from the electric guitar amp model and being amplified by the acoustic model at the time you're making the switch. The acoustic models have a lot more gain applied to them than the electric models. This is done so that the level between the acoustic modeler and the electric modeler are more closely matched. To avoid that frying pan sound, you may need to compromise the Reverb and/or Delay on the electric sound; basically turn it off. You can either program the electric sound with no Reverb or Delay, or you can turn the Reverb and/or Delay off via the Floor Board a few seconds before you switch to the acoustic sound. You may have to experiment to see how long it takes for the Reverb/Delay to "finish" before it's safe to switch to acoustic. The "discharging" time will be different for different lengths of Reverbs and Delays. Q: Can I still get the AXSys/AX2 EPROM upgrade? A: No, as the AXsys/AX2 EPROM is no longer readily available on the commercial market. Q: Can I still get the AXSys/AX2 Line 6 cover? A: The offical Line 6 AXsys/AX2 cover is longer being produced, but you can get a cover from a third party at the following link: Cases And Covers Q: Where can I get replacement knobs/speakers/logos for my AxSys/AX2 amp? A: Please check the Line 6 Store. Q: Where can I download an AxSys/AX2 manual? A: Line 6 Manuals.