Search the Community
Showing results for tags 'asked'.
Total Looper Recording Time: 30 seconds (60 seconds with half-speed enabled) Ins and Outs: Stereo Input through two 1/4" mono inputs (L and R), stereo effects loop (Send and Return each has stereo L and R 1/4" jacks), and stereo output through two 1/4" mono outputs (L and R). All inputs and outputs are unbalanced instrument level. Additionally, two 1/4" jacks for 2 expression pedals Expression Pedal: Use Line 6 EX-1 or an expression pedal with a passive 10K ohm mono linear taper pot, using a standard 1/4 inch mono instrument cable Power Adapter: Included Line 6 PX-2 only (Specs: 9V, 2000mA, 2.5mm barrel diameter). No battery power option available Product Dimensions: 15.5" (L) x 12" (W) x 3.5" (H) Weight: 10.2 lbs Q: How many total effects are there in the M13? A: With the latest 2.04 Firmware update found at www.line6.com/software, there are 109 total effects available on the M13. Q: How many of each type of effect is there on the M13? A: Distortions/Comps/EQ/Volume: 30 Modulations: 22 Filter/Pitch: 26 Delays: 19 Reverbs: 12 Registration & Warranty Q: How do I register my M13? A: You can register any Line 6 product to your account here: Registration. For more detailed registration help, please see the Product Registration F.A.Q. Q: What is the warranty on the M13? A: Twelve months from the date of purchase. Authorized Line 6 Service Centers, will need you to provide a copy of the purchase receipt to validate date for warranty processing. Please be sure to have those materials ready, should you need to get your unit serviced under warranty. Troubleshooting & Service Q: How do I perform a Factory Reset on the M13? A: You can perform a factory reset by entering the Setup screen and turning the Model Select knob on FX UNIT 4 until the corresponding parameter displays â€˜RST FACT?â€™ You can then press down on the Model Select Knob twice to reset the unit. You can also re-install the flash memory to return the M13 to factory settings. Q: Does Line 6 M13 Stompbox Modeler include guitar amp or cab modeling? A: Nope. Just stompboxes. Q: Will the looper still work while I'm changing sounds and scenes? A: Absolutely. Once you have captured your looped creation, leave it repeating and go back to using any of the effects. Q: Where's the tuner? A: Press and hold down the TAP TEMPO button to activate the tuner. When activated, the tuner shows up in the LCD. By default, once the tuner is activated all signals are muted. Q: What is a "Scene"? A: A "scene" is a pedal board arrangement on your Line 6 M13 Stompbox Modeler with 12 available effects, up to 4 at once. Q: How does Latch Scene mode work? A: You can switch between the different Scenes (presets) of the M13 with a single button press. You must first go into the M13â€™s SETUP menu (hold the Looper Controls button for a few seconds), and in the FX3 screen, turn the middle knob in the bottom row clockwise to change the SCENE mode to â€˜LATCHâ€™. Now exit the SETUP menu (hit Looper Controls again) and press the SCENES switch to view the different Scenes of effects. Now, when you press on each of the Scenes footswitches, it will call up the Scene, but you will remain in the Scenes view allowing you to change to a different Scene of effects with a single button press. Q: How many scenes are there and how do I access them? A: With the 2.01 update, you can create and save up to 12 different scenes in one Scene Folder. With 4 Scene Folders, you get 48 total scenes on the M13! Press the scenes button to access the scenes and turn the MODEL SELECT knob on FX Unit 1 to access the additional folders. Q: Can I backup my scenes to my computer? A: You can backup your scenes via MIDI. Check out the M13 Scene Backup document. Q: Where can I get the factory scenes for my M13? A: You can regain the factory scenes on the M13 following the reset procedure described above, or you can download the individual scenes from the Institute of Noise website. Q: Which expression pedals can I use with the M13? A: We recommend using the Line 6 EX-1 or the Mission Engineering EP1-L6 expression pedals. You can also use any other expression pedal containing a 10k Ohm Potentiometer. Expression pedals allow you to change stompbox controls using your feet so you can adjust the sound while you play. On the fly, you can modify the length of your delay time, dial up the reverb mix, or change the depth of your tremolo. Q: One of my LCD screen's color appears to be different than the other LCD's that have the same model family selected. Can I adjust the color to match the other displays (i.e. I have 4 cascading Delay models and screen #2 appears to be not quite as "green" as the other 3)? A: Yes. Power off the unit. Hold down the "Model Select" knob of LCD screen #3. Power on the unit. You can now adjust the relative color of each LCD display screen relative to the other ones.
Q: Will the Stompbox Modelers work with other instruments besides guitar? Yes, the Stomp Box Modelers will work with just about any "instrument level" device including bass guitar. Q: How can I reset my DL4 to the factory presets? A: You can reset your pedal to the factory settings by powering it up with the A and D footswitches held down - the power is turned on and off on the modeler pedals by inserting a plug into the left mono input jack. Q: How can I set up my DL4 in an effects chain? What kind of power supply does the DL4 require? A: For information on setting up your DL4 in an effects chain or power supply information, please click here. Q: Does the DL4 have reverb? A: The DL4 delay Modeler does not have reverb. It has 15 different delay models and a loop sampler. Q: What are some features and functions of the looper? A: The DL4 Loop Sampler function operates at 14 seconds to summed mono outputs at regular speed, and 28 seconds at half speed. A loop sampled and played at normal speed, then switched to half speed, will drop the pitch an octave. A loop sampled and played at half speed will play back at normal pitch. If the speed is then returned to normal, the pitch will be raised an octave. When the DL4 is in 1/2 speed mode, the sampling rate and consequently the bandwidth have been halfed. This shouldn't be very noticeable though as this halfed bandwidth is still wider than most standard electric guitar amps. If you were using the unit with a very clean, bright electric guitar (or acoustic guitar)and monitoring through studio monitors, you may notice the change in bandwidth. While in "Loop Sampler" mode, the DL4 will receive signal through each of its two inputs simultaneously. The input signal will then be summed to mono, sampled and then sent to the two outputs. In order to sample both inputs separately (or in stereo), the unit would have required two separate sample processors and a lot more RAM. Needless to say, this would have increased the cost of the unit dramatically. All other DL4 "Delay Models" will however have a discrete left and right stereo output. Q: How can I use an EX-1 Expression pedal with my DL4? A: For information on using an EX-1 expression pedal with the DL4, please click here. Q: How is the Expression pedal implemented in the loop/sampler portion of the DL4? Can you adjust the feedback level of the loop (so loops start to fade), or just the mix of loop in the output signal? A: The expression pedal works the same way in the Loop Sampler mode as it does in the regular delay mode. You can set the toe-down position of the pedal to one setting of the knobs (excluding the model selector knob) and the heel-down position to another setting. For example you could have the toe-down position set for the loop mix (mix knob) at maximum, the delay level (tweez) at medium, the delay modulation (tweak)at minimum, the delay repeats at half-way, and the delay time set fast (say 3 o'clock). You could then put the pedal in the heel-down position and set the knobs for the loop level at minimum, the delay level at maximum, the modulation at minimum, the repeats at minimum and the delay time long (say 9 o'clock). Now when you're playing (and the play/stop button is switched on), putting the pedal in the toe down position will give you the loop at full volume, pre-loop delay that is of medium volume volume with no modulation and a fast time. When you switch to heel-down, you'd get no loop (even with the play/stop button switched on)with a long single delay that is very loud. Yes it will remember your settings after you turn the DL4 off. The loop sampler can either play the loop indefinitely (until you hit the stop button)or play it one time only then stop (Button C). It will not trail off on it's own. You would have to use the expression pedal to ride it's level. Q: On the stomp-box modelers, how do I turn on the alternate (delay trails) bypass and what does it do? A: Alternate Bypass will allow the delay to remain in the signal (fade off into the distance) when the pedal is turned off, where True Bypass will stop the delay as soon as the pedal is turned off. Alternate bypass mode should prevent any drop in volume level when the pedal is engaged. In addition, it will not cut off delay trails in a long delay setting. To switch between true bypass and alternate bypass mode, you will need to hold down the a and c buttons at the same time for at least three seconds while inserting the left mono input(which will turn on the unit) to initialize alternate bypass. It will remember the selected bypass mode. Since it's a simple toggle, if you want to switch back, just repeat the process. Q: I'm having a hard time getting my bass loops to sync up with my drum tracks. It almost sounds as though the bass loops are slowing down. Is that possible? Or are there some tricks to getting the loops right on the money? A: What you are experiencing is caused by the fact that it is very difficult to record a perfectly timed loop. Even if the original loop is off by the slightest amount of time, that time will be compounded with every repeat of the loop. Example: if the end of the loop is 1ms off, after 10 loops the guitar parts are now 10ms faster or slower than the drum parts. After 15 loops it will have a 15ms difference etc...You may need to re-sample the loop if after using it 6-8 times it doesn't match perfectly. With practice, you will get the feel of the correctly timed loop. Q: Can I make the sampled loop louder without overpowering my guitar? A: While in the LOOP SAMPLER mode, a simple turn of the MIX knob should enable you to control the level of the initial loops. Also, using the DL4 with a Line 6 EX-1 Expression Pedal will enable you to "morph" between two different MIX settings on the fly, from the floor, in real time. Simply place the EX-1 in the "heel down" position and program the pedal to your first desired setting. Next, put the EX-1 in the toe down position and program your second desired setting. Now, move the pedal back and forth and morph away baby! More information on the DL4 can be found at our Stomp Box Modelers product page. Q: What is the "suppressed carrier" frequency of the ring modulator patch? Is it fixed, or does it change with the variable waveform control (tweak or tweez)? A: It is variable and controlled via the tweak knob. 0 = sine, 10 = square wave. Q: How do I get the "Alvin Lee" dotted eighth note rhythm or "U2/Edge" delay from the DL4 pedal? A: The Alvin Lee Dotted Eighth Note Rhythm: The "Alvin Lee" sound is a single slap-back repeat. To set it up: 1. Tap the dotted eighth rhythm into the Digital Delay model. 2. Set Repeats, Tweak and Tweez to zero and the mix to 1:00. It may seem difficult to tap that rhythm in with your foot, but with a little practice, it becomes pretty easy. There is no preset delay value of a dotted eighth rhythm in the Rhythmic Delay model. The "U2 / Edge" Delay: The "U2/Edge" sound has 1.5 to 2 repeats on each of the stereo delays. To set this up: 1. Set the delay model to stereo delay and the unit automatically defaults to the "U2" sound. The Edge delay is actually a dotted eighth rhythm on the left side and a quarter note rhythm on the right side. The way to adjust the delay to this sound is to set the delay time to 11:00, repeats to 7:30, Tweak to 11:30, Tweez to 7:30 and mix to 1:00. If you want the tempo to be faster, just move the Delay Time and Tweak knobs a little counter-clockwise. You will have to make adjustments by ear to get that perfect "dotted eighth and quarter note" sound. The default Tap Tempo rhythm for the models is a quarter note. It is not possible to change this default rhythm. The only solution would be to save the presets with a different rhythm. This would allow for six presets if you used the optional expression pedal.
Q: Where can I get a Floor Pod Presets Chart? FloorPOD Presets FloorPOD Plus Presets Q: What is the warranty on my Floor Pod product? A: The warranty on the Floor POD and Floorpod Plus units is twelve months from the date of purchase. Q: How can I download the manual? A: Manuals Q: What power supply do I need to use? A: The Line 6 PX-2 is the correct power supply for the Floor Pod and Floor Pod Plus. Q: What are the MIDI jacks on my FloorPod Plus unit for? A: The MIDI jacks on the Floorpod Plus are are used to connect to MIDI jacks to update the patches on your Floorpod Plus using the Vyzex editor. Q: Where can I download the editor for the Floor Pod Plus? A: You can download the Vyzex Floor POD plus editor directly from the Line 6 software downloads page:Line 6 Software Downloads Q: Is there a settings list for the presets used on the demonstrations? A:There is no documentation on the settings used for the Floor POD and Floor POD Plus demonstrations Q: How do I calibrate my Floor Pod/Plus Unit? Floor Pod Plus - Hold toe-switch on VOL/WAH and power unit. The display will read "PC" (Pedal calibration) and then "000". - With the pedal at toe-position, hit the "A" button. The display will show "100". - With the pedal at the Heel-position, hit the "B" button. The display will show "100" - Press footswitch C to read the numeric values. Press pedal-toe switch on and observe lights around effects encoder, which will reveal the pedal position. - Press and hold tap switch for 2 seconds to save calibration. Floor POD - Power off, Hold toe switch on pedal and power on. When "PC" appears press and hold DIST switch until a number flashes in the Display. - Move pedal from toe-down to heel-down position and back up to toe-down position clicking the Toe-switch. - Wait 5 seconds and unplug power. preset chart (rev a).pdf
Q: What are ToneCore pedals?A: ToneCore pedals are the line of modeling stompboxes from Line 6. Each of the pedals in the Tone Core line include superior Line 6 tone and features, rugged die-cast construction, dual-action switching (tap tempo), and 9 Volt operation (or optional power supply). Q: Are ToneCore pedals "true bypass"? A: No. However, they use an FET style switching that removes the A/D converter from the audio when in Bypass. That being said, it is unlikely that you will notice any change in your tone as FET's are extremely quiet and very fast. Q: Are the ToneCore pedals buffered? A: Yes, all the Tonecore pedals are buffered. Q: Are the ToneCore pedals "true stereo"? Which models have stereo inputs/outputs? A: The following Tonecore pedals are true stereo (stereo inputs and outputs): The Tap Tremolo, Space Chorus, and Echo park. Q: What kind of connections do the ToneCore pedals utilize? A: All ToneCore pedals have unbalanced input and output jacks. Q: Does the delay have a looper?A: No. If you need looping controls and more elaborate delay features, the Line 6 DL4 sets the standard with 14 seconds of loop time, half-speed, and loop reverse. Q: How does the tap tempo work on the various pedals? A: ToneCore pedals feature a unique 2-IN-1 step footswitch used setting the tempo for time-based effects. 1) On all effects, step firmly on the footswitch to turn the effect On and Off. 2) On the effects like delay or tremolo, tap lightly on the footswitch a couple times to set the effect tempo. Q: Will the mono dock tap feature work with stereo modules? A: Yes, the tap feature will work the same in either a mono or stereo dock. Q: How do I power my ToneCore unit? A: The Line 6 DC-1 will power one unit at a time, or you can use a standard 9v battery that tests at 9 volts or higher. Avoid using the Line 6 PX-2 power supply (used with the POD series units), as it can damage your Tonecore unit. The DC-1 can be purchased directly from the Line 6 Store. Q: Can I daisy chain Tone Core pedals on a power supply?A: No, you will want to use isolated power supplies for each ToneCore. The Pedal Power 2 Plus can power up to 6 Tonecore pedals and two Modeling pedals at once. Q: What's the difference between these and the big stomp box modelers? A: The new ToneCores are standard, single button sized stompboxes with no preset programmability, while the four button modelers have presets that can be programmed. Q: Are these models based on vintage pedal effects or are they original? A: Some models are totally new and others were developed using modified versions of Line 6's effects library. Q: Can I run my Line 6 Tonecore pedal at line level either in an effect loop or between a keyboard and an amplifier? A: Yes, you should have no problems running a Tonecore pedal at line level either in an effect loop or between a keyboard and an amplifier. Q: How do I change the battery in my Tonecore pedal? A: Press firmly on both sides of the metal buttons (at the same time) where the pedal presses down. This will disengage the locking mechanism and you will be able to access the battery chamber underneath the pedal section of the Tonecore. Q: How do I get the pedal effect to turn off? A: Due to the unique 2-IN-1 step footswitch used to set the tempo for time-based effects, you need to push hard to engage/disengage the effect. You will hear/feel an audible "click" when the effect is activated/deactivated. Q: My dock was damaged but the module is fine. How can I replace it? A: The mono dock is the only replaceable part left for this product, and can be purchased directly from the Line 6 Store. Q: What are the setting for the pedals in the demonstrations? A: Unfortunately we have no record of the settings used for the demonstrations. Q: Do I need to have my Line 6 amplifier on a specific setting if I am going to utilize a Line 6 effect pedal? A: There is no specific setting you should use, but you may want to modify the effects in your presets when doing your initial setup to hear exactly what you are working on. Q: I notice a latency when you max the mix knob on the Echo Park? A: The mix knob full on means that you will only have delay, and none of the original guitar signal. if you are running the pedal between your guitar and amplifier you will most likely want to have the mix position at 50% value or less. Q: Is the dry signal passed through as analog and then mixed with the digital wet signal, or is the entire signal converted to digital, manipulated and then converted back to analog? A: The audio signal does a "full conversion" of analog to digital processing, and then back to analog processing. Q: What is the input and output impedence of the Tonecore series? A: Input impedence: ~680-800 ohms, output impedence: ~1Kohm. Q: What size Allen wrench is used to change the effect module? A: 7/64" A.E.S.