Search the Community
Showing results for tags 'bass'.
-
hello, just received my L3T, plugged in the Helix and played both treble and bass side of my chapman stick into it at moderate volume. As soon as I sustained any mid low content the noisy fan came on. Is this normal? Do these L3T start pumping on the fan as soon as you solicit the bass amp? Does that change if you add a L3S bass cab?
-
Hi guys! I recently purchased a Line 6 Helix! After months of reading information online and also getting an amazing hands-on demo with a Line 6 representative in a music store close to home here in Melbourne, Australia! This unit cannot be praised enough in my opinion. I love how much color and variety its given my tone on the Dingwall and Its really refreshing seeing all of these regular firmware updates. Look forward to talking to you all over time. Best regards
-
Hey Guys! I put together another video highlighting a bass tone inside of Helix. It uses the Del Sol 300 amp block which is modeled after the "Sun Coliseum 300," with eh Obsidian 700 which is a model of the Darkglas B7K. The impulse is a ROSEN DIGITAL AUDIO Ampeg SVT. I tried to zoom on all of the important settings. If you have questions, feel free to leave a comment.
-
Hey guys. I was inspired by a fresh set of strings and came up with this bass tone in Helix Rack. Hope it can help someone!
- 1 reply
-
- 1
-
-
- bass
- bass guitar
- (and 5 more)
-
I recently got the Helix and I'm trying to match the bass tone I used to get with my old 11rack. There is a clip linked below. Anyone have suggestions for where to start? In the 11 rack I was using an Ampeg model and a Rat but that same setup isn't getting me there with the Helix. https://soundcloud.com/ejendres/burrito-bass-136bmp-audiotrimmercom
-
So after weeks of waiting for a Darkglass Alpha Omega to be in stock on sweetwater, I FINALLY got my hands on one. Within 30-60 minutes I was able to dial in a really crunchy dirty bass tone that I was pretty happy with. I left my initial impressions in a reddit post on r/bass. My signal chain was bass > Alpha Omega > Helix {noise gate > LA Compressor > Woody Blue > IR } I didn't find out about the Obsidian 7000 until yesterday, and can't believe I didn't notice the naming pun (Darkglass = Obsidian; 7000 = 7k) lol. I've had my Helix Rack unit for about 4 weeks now but due to work and school, haven't been able to sit with it for hours on end. When I wanted to get a preamp/drive bass pedal, the B7k was the other contender based on its universal acclaim and usage by a lot of my favorite bassists. So, for lollipops and giggles I wanted to see if I can get AS GOOD of a tone with all Helix and the Obsidian 7000. ....Yes.....a thousand times yes. I got a BETTER tone (in my opinion). In my initial impressions of the Alpha Omega, I noted how the low-end saturation bothered me. It sounds really loose and flubby to my ears. The switches on the Alpha Omega are binary for their boosts compared to the B7k which has 3 way toggle (On-Off-Cut). The blend control on the Obsidian 7000 is more fine grained compared to the Alpha Omega. I prefer this because even adjusting the blend on the Alpha Omega brings up that dreaded (to me) low-end saturation. I haven't had time to record some A-B comparisons, but I can if anyone would like. All in all, I'm sending back the Alpha Omega because I'm able to get a bass tone I like and have been searching for with the Helix. I lollipop love this thing.
- 2 replies
-
- 3
-
-
- obsidian 7000
- darkglass
- (and 7 more)
-
Hi everyone I'm new to both: Helix and the world of IRs (and even the english language - I hope you guys understand me) :) I've been reading for hours now, and as far as I understand the topic, it should be possible to make my acoustic guitar sound (more or less) like a bass guitar. For now I'm using an octaver and lots of EQing, but I think IRs should be a much better way (if they can make electrics sound like acoustics...) And then a kind of "ambient-orchestra-strings" sound would be great as well. And again I'm hoping to achieve that with IRs (at the moment tons of delay, chorus... is doing the job). So at the bottom line I have 2 questions: a.) Can I do that? b.) Where do I find suitable IRs (Bass & Orchestra/Violins...). Free ones would be nice to try, but basically it's not a problem if they cost a view bugs. What I found for myself is 3 SIGMA. Looks very promising. Thanks a lot!!! chris
-
Can someone please help me get a bass tone for my spider V 60. Yes I know its a guitar amp but my bass amp stopped working and my only option is this amp. Please help me:^(
-
I want to ask if someone can verify that the following happens on their Helix as it does on mine before I file a bug report. I searched for this before creating this topic, if it's a dupe I'm excusing myself beforehand. I use Firmware 2.21 . I recommend using a DAW or method B to make sure there's no additional noises coming from pickups, cables etc. Symptom: Both the SV Beast Nrm and Brt models exhibit a clicking noise after sound was processed if the "Sag" parameter is set to a value of 0.6 or greater. Steps to reproduce: 1. Create a patch with just an SV Beast Amp in it. Set the "Sag" to a value equal or greater than 0.6, the other controls don't seem to have an influence. Set the input block to something quiet, e.g. USB. Method A: 2. Connect the Helix to a DAW and use a routing with sound only going in and out via USB (Reamping). 3. Monitor the Helix' main output (Channels 1&2), e.g. by arming a track for recording. 4. Play anything for any amount of time, then stop playback. Method B: 2. Set the "Hum" value to anything that produces an audible sound, then move it rapidly to 0. For both methods, there should be a crackling noise following that sounds like static discharge going through a lowpass filter. For "Sag" settings of 0.5 or less, I could not reproduce the symptom. If someone can confirm this, I will file a bug report, otherwise I'll scratch my head. With a confused face.
-
HELP!!! I have a Variax 700 bass with VDI cable, it does not work with HD500x pod or pod XT live bass. Connecting to the XT Live pod freezes the screen. Until the cable is unplugged, it will restart. With the HD500x pod, I connect a regular RJ45 cable and work for a while but then the HD500X pod restarts. The VDI cable works well with JTV59 variax Can anybody help me? -
Short version: How can I improvise a low pass filter out of the EQ on my HD500 so that I can get only the E and A strings, like we get in the polyphonic mode in the Boss OC-3 pedal? Detailed version: I've been trying to emulate the polyphonic mode found on the Boss OC-3 on my HD500. I'm running two parallel effects lines, with a graphic EQ as a low pass filter on one (to get just the E and A strings) and a hi pass on the other (just to give some presence while trying to retain the natural sound as much as possible). My signal chain on the bass side is the EQ and a bass octaver running into a Flip Top amp (which has the bass boosted and mids, treb and presence turned off). While I've gotten 70% there, I've run into some expected problems, mainly with the way the improvised low pass filter is working (it doesn't completely eliminate the other strings), because of which there is a constant compromise between the levels of the two channels, which either results in 1) the unwanted octaved D,G,B and E strings leaking in (if I want a stronger bass sound), which clashes horribly when I play chords, or 2) a softer bass sound with a trebly, unpleasant characteristic (owing to the EQ settings on the second effect line). Any ideas on how to get around this problem? Any insight would be appreciated. The video I've attached demonstrates the sound I'm aiming at (it's time-stamped)
-
Hi, I play bass and guitar and am looking for an amp that can do both. My question is if it's safe to use a firehawk 1500 as a bass amp without risk of damaging the speakers like you'd have with a "normal" guitar cab. I'm aware that there are no bass amp models built in but that's not a problem. Djeno
-
Hi there, is there a known solution to plugging G10 transmiter to Ibanez soundgear bass guitars? Tried it with the included adapter but it is too short...
-
Dear all, I am not new to Line 6 ( used POD X3 many years ago, using a G10 very happily) but new to Helix, currently testing the native during the 15 days trial period. My main instrument is the bass. I have already good experience with Zoom B3 and B3n, have used it for gigs, already. I am trying to find out if HELIX LT could be my next Multi. I am very impressed with the quality of tube bass amps of HELIX. This is really a big step . But I have difficult to find some very clean bass amps or settings, e.g. a MarkBass amp simulation with it s VLE and VLF EQs. Is there anybody who can help me or have any recommendations? best regards, Markus
-
Greetings fellow Line6 Users! Hoping someone can tell me what the parameters are on the 3 OSC Synth block? I'll start by saying I dont own a Helix, but have been closely following features and functionality since release. I'm a bassist and predominantly play electronic genres for a living - currently using the POD HD500x for all my synth-bass needs (almost exclusively for this purpose, occasionally guitar wah) and I used the M9 and M13 before it - all with great sucess! So my bread and butter is the filter section (Dual Synth-O-Matic signals as my main synth generator followed by a host of filtering - Voice Box, Throbber, Slow Filter, Q Filter etc etc). I'm just wondering what the Helix can offer along these lines, as I can only guess from scouring the manual......I have searched long and hard to find decent audio / video examples of sounds or even the edit screen with little success. Would also like to know which waveforms are available with this effect block if possible! Looking to pull the trigger on a Helix asap, as the routing options would connect all the dots as far as my setup is concerned - but this is the deciding factor for me as it's basically just use it as a synthesiser. I'll finish by saying I live in Dubai so road testing is unfortunately out of the question for me. Any help would be super appreciated!!! Thanks guys, Steve
-
After about six months of hovering over the "Add to cart" button at guitarguitar.co.uk, I've finally ordered a Helix and should have it tomorrow. I've been entirely software based since moving on from my old Pod XT Live some years ago, but I still have my small family of Variaxes: an original 500, an Acoustic 700, and a 705 bass. The acoustic probably sees the most use these days because as much of a pain as it is to wire up the PSU/DI box with the TRS cable, it's still less hassle than micing up my Larivee when I just want to put down a scratch track. Anyway, I've had a dig through the forums, and I haven't really found a definitive answer on this: To what extent are these guitars compatible with the Helix? To be clear, I'm not overly concerned about controlling the guitars from the Helix - or vice versa - but I'd hope to be able to at least power the guitars via the VDI input and send audio. I'll happily tweak settings manually on the guitars themselves, and I don't intend on getting into any deep editing, so I'm okay not having Workbench. Thanks!
-
Hi everyone, sorry but I'm quite new to the line 6 family for an "in depth" hands-on product. It seems I can't find a stright answer to this question: Can I pay, download and integrate the HD Bass pack, or any of the extension model on my Pod HD400? It seems that there no extension packs can be loaded into my HD400... is it possible??!! Thanks everyone for helping me to understand!
-
Hi. A friend of mine plans on using the Helix as a Bass Preamp for Live usage. He does not want to go In-Ears or some silent-stage-stuff, rather he likes to get his massive analog bass-tone on stage, using the Helix and some kind of speaker-system. The tone should be amplified over his Gallien-Krueger Bassamp, using the Effects-Return to feed the solid state output stage. Which FRFR speaker-system would a Bass-Player prefer for the look & feel and the most versatile bass-sound? Is it best to go 2x15 passive PA-System Speaker or will a 1x15 do the job for bass? Or shall he still use his two 4x10 Trace-Elliot cabs driven from out the GK-Amp? A active FRFR would be no alternative, because he likes to have a amp on the cab for optical reasons ;) -
Hello everybody, i'm a bass player. I felt in love with helix but...it's so expensive, and I don't know if it worths the price for a bassa player. My need is to use some effects (comp. ocatvers, synths, wah) and sometimes amp models becaus I don't wanto to carrie all my stack. Now I have a zoom b3, a mark bass super synth and an ebs compressor, but I don't think b3 is good for amp simulation. My question is.....shall I consider POD HD 500x for bass or Helix is however better and worths the price? Shall I look for a used POD x3? I don't know what to do. It seems helix is designed expecially for guitar players (I know the firmware update introduced lots of amps for bass), and so the Pod HD (of course I would buy tha bass expansion pack), but pod hd costs about the half of Helix HD. Can you share your experiences with me? Can you give me some good advice please?
-
Which to buy for my 705? http://www.graphtech.com/products/brands/ghost/ghost-pickups---bass
-
Hi :) So I'm new around here, wanted to say hello. so hello. Also, I just uploaded a Jam/Groove with a Bass preset I'm working on, and I would love to hear what you guys think. https://www.youtube.com/watch?v=6_whvpXBk-U Have a good one.
-
Hi, I play the bass in a progressive metal band and I've been trying to get my sound out of the mix for quite some time now, without success. My rig is: Ibanez BTB705dx Line 6 pod HD500 Ampeg SVT-4 amp Mesa Standard Powerhouse 2x15 cab The kind of tone I'm trying to get is like Dream Theatre's "Home" intro or Tool's Justin Chancellor lead parts. I'm also trying to get this kind of synth bass sound Colin Edwin has at the beginning of Porcupine Tree's "The start of something beautiful". Can someone help me find these tones? I've been looking everywhere for answers and doing my own tests for more than a year now, in vain. Sorry I didn't manage to get youtube links on this post, but the songs are easy to find and the bass sounds I'm talking about are right at the beginning the first time the bass kicks in.
-
I am still a user of your Variax Bass and a Variax 500 together with their respective Pod XT Lives. In order to upgrade my sound and lighten my equipment I am thinking about replacing the Pods by a Pod 500X. But there seem to be much less amplifier models, especially for bass. Did I miss a model pack like the ones you were offering for earlier models or would replacing the Bass Pod against a 500X mean to lose a lot of sound possibilities? Thx in advance Uli
-
Hi fellow variax freaks, I have a conundrum, and wonder if anyone may be in a position to help out in return for some unwanted piezos from Variax 300 and 600 - see piezo details below. *** I enquired at a local (Australian) Line 6 distributor regarding buying a jackplate assembly for a newly purchased second hand vaxplant, which has the original variax 300 jackplate assembly, (which requires surgical precision to get the little rubber boot provided to cover the RJ45 connection), and I figure since I already have two other vaxplants, I may as well buy two, so I have a spare. I already bought two, (around three years ago), for less than $30AUD each, though as it turned out, (legacy version no longer available), they were the bass versions, which are interchangable with the 300-700 series (with a little chisel handiwork). See link.. http://www.fullcompass.com/prod/218353-Line-6-50-04-0181-4 Yesterday, the local supplier quoted me $100 each, and they would be for the JTV69 model version - apparently also interchangable....(?) So, I'm a little old fashioned, in so much as I'm not really that interested in lining people's pockets in arbitrary ways, such as this kind of price hike would suggest is occurring, and it would appear I can't order from Full Compass, cos I don't reside in the requisite 50-odd states.... So, it brings me to this random, weirdo request for someone who may may fancy some 2nd hand L R Baggs piezos (14 in total - (new RRP circa $13US each - http://www.fullcompass.com/prod/114557-Line-6-11-11-0001 ), worth around a hunjee in anyone's terms, in exchange for acquiring a couple of the jackplate assemblies, and sending them to me in Australia. I'm happy to despatch first, via registered post, and send you an email showing tracking information. In fact, I have other hardware, eg unused variax 300/600 bits I could throw into the equation also, just to inspire some mutually satisfying trans-global weirdness. ***I upgraded to Ghosts while doing transplants, and have unwanted (but still fully functioning when removed), L R Baggs piezos - a total of 14, including 2 brand new, unused, that I bought as spares. I initially thought that two piezos were failing in a second hand 300 that I bought, and upon installing the new graphtechs, while I did a transplant, the problem disappeared for a short while, but soon returned. The first E and B piezos take some time (15 minutes) to wake up, after the variax is plugged in. They then become fully operational, and because the same problem still exists, it must be a problem with the PCB, not the piezos. I get around it, by plugging it in, while I continue my setup at a gig, and as such is a non-issue. Yours, in weirdness, Ian. -
Would there be any problem in connecting a bass to the desktop pod hd and sounded by a vst plugin like ampeg? It can be damaged? Thanks!!
