Search the Community
Showing results for tags 'cable'.
-
If you are having trouble with your DL-4 MkII stompbox modeler, please try the following: - Use a different guitar, cables, and amp to make sure they are individually working correctly. - Remove all other pedals between your instrument and the amplifier. Ensure that: - The cables you are using to test work correctly by plugging directly from the instrument into the amplifier. - All jacks and nuts on the pedal are tight. - The unit is receiving sufficient power from the correct power supply (fresh batteries or a Line 6 DC-3g, DC-3h or DC-1g). Do not use old batteries to test pedals. - Reset the pedal by pressing the A and 'Tap' footswitches while inserting the power connector and powering on. Continue to hold the switches for approximately 8 seconds, until you see the green LEDs light up. - The last thing to try is to reinstall the firmware. Go to https://line6.com/software/index.html, choose "DL4 MkII" and "Firmware" from the menus, then follow the directions listed with the latest firmware entry. If you are still having difficulty you will need to have the unit repaired at an Authorized Service Center. All Line 6 Pedals carry a 12 month parts and labor warranty from the date of purchase from an Authorized Retailer. Please take a copy of the dated proof of purchase to ensure the warranty is covered. Product Repair Line 6 Product Warranty
-
Originally, Pocket POD included a USB-mini cable that allowed for connection to the third-party editor software Vyzex. Please note that while the Vyzex editor software is freely available to download from www.Line6.com/software, it is no longer supported by its publisher Psicraft nor Line 6. As such, a USB-mini cable is no longer included in the box. We have found that a number of Pocket POD boxes mentioning the cable were shipped, despite those boxes not including the cable. For those in this scenario wishing to still use Vyzex, a USB-mini cable can be sourced at many online retailers. USB-mini cables are not available from Line 6.
-
I have a FBV Shortboard MKII that is connected to a Spider IV 75 watt amp. The plastic clip on the original cable connector broke off. I purchased a CAT 6 cable as a replacement but when I plugged it in, the board would light up and indicate it was a floorboard, but it would not respond to any of the buttons. I then went back, connected the old cord, and duct taped the connector in for now. The system works fine. The replacement cable is a standard CAT 6 cable. Shouldn't it work, or no? Do I need a CAT 5 specifically? Any insight is appreciated.
-
Hi All, the Lightning cable that I used to connect sonic port to my Ipad and my phone is gone. Is impossible to find an other cable. Is incredible that line 6 doesn't sell separatly that cables. What can I do ? I use this device every day, I'm desperated T______T Thank You for answers
-
Does anyone have a recommendation for a replacement power cable for a G10S wireless? Thanks.
-
Hey guys, I have a JTV variax but I have no USB interface to change it's parameters, and I have no other interface (POD, helix, etc.). The interface by iytself is 150$ here, which is absurd. Would this cable make the Workbench HD see my JTV and allow me to update firmware/upload patches and change params? https://bencraven.com/?p=1616 Thanks! -
Hi guys I've recently lost my Helix Lt power cable on stage and I was wondering if I could use any other IEC cable. Has anyone tried it? I found nothing using the search tool, thanks and keep rocking on!
-
Hi! I simply can't fathom why this information isn't easily available, but I've been searching for a good while now and haven't been able to determine what kind of firewire cable the Pod XT uses. Anyone knows, so I can buy the correct one?
-
The VDI cable disconnect issue: I think I may have found the issue here. The cables I bought don't have the shrink tubing ( sweetwater vdi cable ). Mine both have a black knurled "nut" shown by the red arrows and if those aren't tight, the jack inside can move in an out. This may have been causing my disconnects if the cable was bumped in that area. -
How do I set up the HX effects signal chain/fx block/mixer for 7cm? I'm struggling! What are the mixer and effects loops settings in the HX effects? Stereo? Dual mono? I'm using two amps, and want to set up so drives go into the front of the amp, and delays/reverbs in the fx loops. Main problems: - I don't know how the signal chain should be configured to set up 7 cable method into the fx loops of two amps. - Because the setup isn't correct, I currently get a lot of noise as both amps are sending the preamp to the other amp! Basically both preamps are blended on each amp. - How do I ensure delays and other effects are stereo - as in ping-pong delay etc. What are the mixer and effects loops settings in the HX effects? Stereo? Dual mono?
-
Hi, I was wondering if there are vdi cables available to purchase in Europe? I am searching for a better quality that the one from line6 offers. Some previous posts discuss about such alternatives, but they seems to be only available in the US. Thanks for any advice you may have!
-
Hi everyone! I'm new to the forum and joined just after buying a jtv-69 used. It came with a battery and a charger, but no digital interface in the case. So my question is: what exactly is needed in order to connect it to my macbook and eventually to workbench hd? will a regular ethernet cable work? do I have to use the line6 cable? even on that cable, it's written that it's meant for digital connection to a PodXT and the like - so I'm not sure that this is meant to be used to connect the guitar to a computer. Maybe it's mentioned somewhere but I honestly could not find the complete info. is the "DVI" the cable itself? or some kind of a converter/adapter? assuming I have the line6 cable, does it connect to a usb or the ethernet port? how does this chain look exactly? If you could help a newbie I would be very grateful! -
Not sure where to post this, so please move if appropriate. I'm wondering what folks recommend for guitar cables. I just use whatever is cheap at my local store. Is there a preferred professional choice of cable? Thanks, Shawn
-
i Have a Line 6 M13 a few years and I always used with external drive to achieve the best tone i could ever get, but it always was on the input of my amp. now I'm buying a new amp with an effects loops. my question is if I use the 4CM and use external drive do the overdrive signal will go to the effects loops of my amp? Because it's not been processed inside the M13. If the overdrive signal is going to the effects loop what should I do to not damage my amp and still use external drives with the M13?
-
What should I do? where can I get one? currently in dubai, uae
-
Hi, when connecting the balanced outputs of the UX8 to the unbalanced inputs of the Roland MC-909 should I use a balanced or unbalanced cable? What effect would using balanced vs. unbalanced have on the signal?
-
I have a JTV 69 made in Korea and when I use a Variax cable with Helix or HD 500 it changes the sound of the magnetic pickups. Sounds to me like a bit of piezo quack. When I use a guitar cable the pickups sound natural. I'd like to be able to use the variax cable but I'd also like to be able to use the magnetic pickups. Has anyone else run into this? -
Monkey tells me, that Flash Memory installed is unknown - update stops with code 80007104 The Editor isn´t working to, giving me back an Code 80000000 I´ve tried doing the update in Safe Mode holding down the "right side" of the directional selector and power up the Pod (leads to some "overview") holding down the "down side" of the directional selector and power up the Pod (leads to "Update Flash"). I´ve tried the original USB-Cable and another one. I´ve tried to click "NO" when it asks you the keep the current patches. Please help me ASAP!!! Computer-Details: OS-X El Capitan 10.11.2 (15C50)
-
I have searched high and low and have not found a straightforward answer. I have an HD500x on the way and a pair of Rokit 6 G3 to pair with it. The Rokit 6's have the following inputs: Balanced XLR Balanced TRS(1/4" jack) Unbalanced RCA I believe I have read that it is preferred to use the unbalanced 1/4" output on the HD500X as the XLR output signal is low. Can I connect the 1/4" unbalanced out to the 1/4" balanced TRS on the Rokits? What cable should I be using? Or should I use a 1/4" unbalanced to RCA cable? I am so confused! Thanks for the help.
-
I saw some older posts talking about various cables for the Line 6 link. I was wondering if there was any newer info on this. I am currently using a cheap Hosa EBU-010 AES/EBU Digital Audio Cable. I don't have any problems with it, but every time I look at how thin it is, I wonder if using something higher end, such as Mogami Gold AES would work better. Anyone try some of the various higher end cables? Thanks.
-
IS it possible for you to connect the pod hd 500 only on the 'return' and 'out' jacks only, to get only ambient effects from the POD? Only to do not convert from Analog to Digital 4 times the tube amp signal (like the 4 cable method does)? Like this: (FX LOOP set to ON in the POD) guitar -> tube amplifier IN -> tube amplifier SEND -> POD RETURN -> [ ambient effects ] -> POD OUT -> tube amplifier RETURN thank you!
-
So I came home from work to find that my dog had gone into my studio and chewed my Pod hd500x power supply and the VDI cable for my JTV. I ordered replacements the next day from sweetwater and was pleasantly surprised to find that Line 6 has upgraded the cables jacket that is more like a normal 1/4 inch guitar cable style. It's a great improvement on the plastic jacket on the older version. It doesn't twist up so bad and doesn't hold the memory of being coiled up. Any way good job Line 6 it's nice to see improvement. :D- 7 replies
-
- 2
-
-
- jtv variax
- cable
- (and 1 more)
-
Is there a special reason the instrument cable is 1 m (3 ft) so long? It's way more than I need and I was wondering if shortening it (snip, snip, re-solder jack and off we go) could somehow impact the units performance? Or am I just being paranoid?
-
Hey Guys First my gear : Line6 POD xt Pro, Laney Ironheart Irt 60 I want to connect my Podxt with my Amp. So how do i do that ? The POD should be used as a effect processor in Distortion Channel of the Amp But as a clean sound i want to use my POD settings and only use the amp as an poweramp for the xt. So anyone out there who knows what i have to do ?
-
hello, I'm pretty new to MIDI, but since I recently bought a KORG Volca Keys unit, I was wondering if I could use my Toneport KB37 as the MIDI controller for this device without first going through a computer? I'm asking because in all the forums and manuals it always mentions going through a computer, and of course the kb37 does not have the MIDI DIN connector. if I get a USB-MIDI converter cable (or SPDIF-MIDI??), can I just plug the kb37 into the Volca and have it work? what kind of cable do I need, in case it needs a special cable? and, you know: just all the other silly noob questions about (this) midi setup that you can think of... ;) thanks, Eric. PS: this is a video of the KORG Volca Keys with a midi keyboard setup, I'm looking for something similar, but with the KB37 https://www.youtube.com/watch?v=XVTm0mT53fU
