Jump to content

Search the Community

Showing results for tags 'control'.



More search options

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Forums

  • Community Support
    • Multi-Effects Units
    • Variax Instruments
    • Amplifiers
    • Computer Based Recording
    • Live Sound
    • Pedals/Controllers
    • Dream Rig - Line 6 Product Integration
  • General Discussion
    • Share your Settings
    • Line 6 Lounge

Categories

  • General FAQ
  • Tutorial Videos
  • Effects/Controllers
    • HELIX
    • Firehawk
    • FBV Controllers (MKI / MKII/ 3)
    • M5 / M9 / M13
    • JM4 Looper
    • Stompbox Modelers / ToneCore
    • ToneCore Development Kit
  • Recording
    • Helix Native
    • Echo Farm
    • POD Farm / POD Studio / TonePort
    • Computer Audio Set Up and Troubleshooting
    • Riffworks Line 6 / Standard Edition
  • POD
    • POD HD Family
    • POD HD500/HD500X
    • POD HD300/400
    • POD X3 Family
    • POD 2.0 / PODxt Family / Pocket POD / FloorPODs
  • AMPLIFi Series Products
    • AMPLIFi 30/75/150/TT
    • AMPLIFi FX100
    • Videos
    • Tone Creation
  • Amplifiers
    • Spider V
    • Powercab
    • Firehawk 1500
    • DT50/DT25
    • Spider IV/Spider Online
    • Spider Valve
    • Spider Jam
    • Vetta
  • Live Sound
    • Relay/XD-V Digital Wireless
    • StageScape M20d Mixer
    • StageSource Speaker
  • Guitars
    • JTV / Shuriken / Variax Standard / Workbench HD
    • 1st Gen Variax Guitars / Bass / Workbench
  • Mobile Products
    • Sonic Port devices / Mobile In
    • Mobile Keys
    • MIDI Mobilizer
    • Mobile POD app
  • Dream Rig
  • Legacy Products
    • Amps
    • POD
    • Effects and Controllers
    • GearBox
    • Line 6 X2 Digital Wireless

Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Joined

  • Start

    End


Group


AIM


MSN


Website URL


ICQ


Yahoo


Jabber


Skype


Location


Interests


Registered Products

Found 36 results

  1. Français Deutsch Explained below is a definition of the Line 6 Audio-MIDI Control Panel. It explains and defines the function of each setting within the application. The "Driver" tab Driver Operating at: The "Driver operating at:" status actually shows the sample rate and bit depth of the data going through the USB cable and the hardware. For X3, the hardware always runs at 48000 Hz, 24 bit regardless of what the driver is doing, so you'll always see 48k, 24bit. From the Gearbox Manual page 3.4 Driver Operation indicator: TonePort & GuitarPort devices - Displays what sample and bit rate the current device is operating at(or with no text if not in use). Note: POD XT devices do not utilize this feature and therefore no text will appear here when a PODxt is the selected device. These devices run at a fixed sample rate which is why you'll see the Sample Rate Converter light always on when viewing the Control Panel with a POD XT device connected. The POD XT is always converting from the custom rate to it's fixed sample rate. Similarly, the SRC light will always be on for X3, unless you're running the driver at 48kHz. Lock Format: The "Lock Format" check box affects two things. 1)All WDM applications 2)The hardware sample rate, if it isn't already locked by the hardware (like X3 or XT). From the Gearbox Manual page 3.4 Lock Driver Format: When checked, this forces the Line 6 audio driver to operate at the Sample and Bit rate settings entered in the two fields below (as opposed to following the sample rate requested by a host audio application). Note: Lock Format doesn't affect the ASIO driver. All sample rates will still work for ASIO even if Lock Format is checked. With TonePort devices, Lock Format will lock that hardware to the given sample rate. If ASIO software asks for a different sample rate, our driver will perform the necessary Sample Rate Conversion. ASIO Settings: The ASIO Settings section are the displayed settings of what you are actually running your ASIO driver at. From the Gearbox Manual page 3.3/3.4 ASIO Client: If you are running audio software that is using this Line 6 device as its ASIO sound card, the name of the software will appear here. If not in use by an ASIO software, none is displayed here as shown. Default Buffer Size: The ASIO buffer size in use. Note this field is only active when in use by an ASIO application. As your audio software documentation will likely tell you, the ASIO Buffer Size will affect the responsiveness and latency of the audio. The lower the setting, the faster the response, but with the trade-off of higher processor usage and the risk of audio dropouts. Raise the value if you are getting inconsistent playback or recording in the audio software. Basically, 512 is generally a good average setting.* Default Bit Depth: The ASIO bit depth in use. Note this field is only active when in use by an ASIO application. It is best to use the highest bit rate your ASIO software will support to ensure high quality audio. Sample Rate Converter: TonePorts support 44.1 and 48 kHz sample rates natively. Some TonePorts also support 88 and 96 kHz sample rates by way of an internal sample rate converter. This indicator lights up to show you when this converter is active, which can be any time your ASIO software is requesting a different sample rate than what your device natively supports. TonePort UX8 supports 44.1, 48, 88.2 and 96 kHz sample rates natively, meaning that these sample rates are not converted. The Inputs and Recording tab: From the Gearbox Manual page 3.5: Input Source Select:* This is a mirrored control for the Source Select within the GearBox application where it allows the user to select which physical input is used on the device. Note that this control is ONLY selectable when the GearBox software is not in use by the current device. When GearBox is in use, it remains grayed out, but displays the current Source that is selected within GearBox. When Gearbox is not in use by the selected Line 6 device, this Input Source Select, like the Source Select in the GearBox application, offers a list of input options. GuitarPort and PODxt devices are always fixed to only route their instrument 1 /4 input signal into GearBox. When a GuitarPort or PODxt is the selected device, this Input Source Select list offers only Instrument as the source. F.A.Q. zur Line 6 Audio-MIDI Steuerung: Im Folgenden sind die Funktionen des Line 6 Audio-MIDI erklärt: Der "Driver" Reiter: Driver Operating at: Der "Driver Operating at:"Status zeigt Ihnen die Samplerate und Bitauflösung der Daten an, die durch das USB Kabel und die Hardware gehen. Für das X3, die Hardware läuft immer auf 48kHz, 24bit egal was der Treiber macht also wird Ihnen immer 48kHz, 24bit angezeigt. Aus dem GearBox Benutzerhandbuch, Seite 3.4: Driver Operation Anzeige: TonePort und GuitarPort Geräte: Anzeige der Samplerate und Bitauflösung des derzeit angeschlossenen Gerätes (oder ohne Text wenn es nicht benutzt wird). Achtung, PODxt Geräte benutzen diese Eigenschaft nicht und somit wird dann auch kein Text angezeigt, wenn ein PODxt ausgewählt wird. Diese Geräte laufen mit einer festgesetzten Samplerate, deshalb wird das Sample Rate Converter Licht immer an sein wenn Sie die Steuerung mit einem PODxt Gerät öffnen. Das PODxt wird immer von der benutzerdefinierten Samplerate auf seine festgesetzte Samplerate konvertieren. So wird das SRC Licht auch immer bei einem X3 angeschaltet sein außer Sie lassen den Treiber auf 48kHz laufen. Lock Format: Das Lock Format Kontrollkästchen beeinflusst zwei Dinge: Alle WDM Programme. Die Hardware Samplerate, sofern diese nicht von der Hardware festgesetzt ist. Aus dem GearBox Benutzerhandbuch, Seite 3.4: Lock Driver Format: Wenn diese Option angekreuzt ist, wird der Line 6 Audiotreiber dazu gezwungen mit der unten eingegebenen Samplerate und Bitauflösung zu arbeiten. Im Gegensatz zur Einhaltung der Samplerate die vom Audio Programme angefordert wird. Achtung, Lock Format beeinflusst nicht den ASIO Treiber. Alle Sampleraten werden weiterhin für ASIO funktionieren auch wenn Lock Format angekreuzt ist. Mit TonePort Geräten wird Lock Format die Hardware auf die angegebene Samplerate fixieren. Wenn ASIO Software nach einener anderen Samplerate fragt wird unser Treiber die nötige Konvertierung vornehmen. ASIO Settings: Die Sektion der ASIO Settings zeigt alle Einstellungen des ASIO Treibers an die tatsächlich laufen. Aus dem GearBox Benutzerhandbuch, Seite 3.3/3.4: ASIO Client: Wenn Sie eine Audio Software benutzen, die das Line 6 Gerät als ASIO Soundkarte verwendet, wird der Name der Software hier erscheinen. Wenn es nicht mit ASIO Software verwendet wird, wird hier "none" stehen. Default Buffer Size: Die ASIO Buffergröße in Benutzung. Achtung, dieses Feld ist nur dann aktiv, wenn es mit einem ASIO Programm benutzt wird. Die ASIO Buffergröße wird die Reaktionsfähigkeit und Latenz des Tons beeinflussen. Je tiefer diese Einstellung, umso schneller die Resonanz. Dies führt jedoch zu einer höheren Prozessorauslastung und man riskiert Audio Aussetzer. Erhöhen Sie diesen Wert wenn Sie einen unbeständigen Ton in Ihrer Audio Software erhalten. Am Allgemeinen ist 512 eine gute, durchschnittliche Einstellung. Default Bit Depth: Die ASIO Bitauflösung in Benutzung. Achtung, dieses Feld ist nur dann aktiv, wenn es mit einem ASIO Programm benutzt wird. Am besten benutzen Sie die höchste, von Ihrer ASIO Software unterstützte, Bitauflösung um eine hohe Audioqualität zu gewährleisten. Sample Rate Converter: TonePorts unterstützen von Haus aus 44.1 und 48kHz Sampleraten. Manche TonePorts unterstützen sogar 88 und 96kHz Sampleraten anhand eines internen Konverters. Diese Anzeige leuchtet auf um Ihnen zu zeigen, dass dieser Konverter aktiv ist. Dies kann jederzeit geschehen, wenn Ihre ASIO Software eine unterschiedliche Samplerate erfordert als die, die Ihr Gerät nativ unterstützt. TonePort UX8 unterstützt 44.1, 48, 88.2 und 96kHz Sampleraten, was bedeutet, dass keine Kovertierung stattfindet. Der Input and Recording Reiter: Aus dem GearBox Benutzerhandbuch, Seite 3.5: Input Source Select ist eine Spiegelung des Source Select des GearBox Programmes, welches Ihnen die Möglichkeit gibt, den physischen Eingang, der auf Ihrem Gerät genutzt werden soll, auwählen zu können. Achtung, diese Eisntellung ist nur dann auswählbar, wenn die GearBox Software derzeit nicht von einem Gerät benutzt wird. Wenn diese von einem Gerät in Benutzung ist, wird die Einstellung grau bleiben aber Ihnen die derzeitige Quelle anzeigen, die im GearBox ausgewählt ist. Wenn GearBox nicht von einem Gerät in Benutzung ist, dann können Sie hier, wie beim Source Select der GearBox Software eine Liste von Eingangsoptionen benutzen. GuitarPort und PODxt Geräte sind immer festgesetzt, um ausschließlich den "Instrument" 6.35mm Eingang ins GearBox zu nutzen. Wenn also ein GuitarPort oder PODxt das ausgewählte Gerät ist dann hat diese Input Source Select Liste nur eine Option, "Instrument". TonePort UX8 hat einen größeren Satz Optionen, schauen Sie sich dazu den Inputs & Recordings Reiter an. Panneau de configuration Line 6 Audio-MIDI: F.A.Q. Explications des options du Line 6 Audio-MIDI: Le tab Driver: Driver operating at: Le statut "Driver operating at:" vous montre la fréquence d'échantillonnage et la profondeur de bits des données traversant le câble USB et le hardware. Pour le X3, le hardware est toujours à 48000 Hz, 24bit n'importe quoi le pilote fait. Vous voyez toujours 48k, 24bit. Retiré de la page 3.4 du manuel d'utilisation Gearbox: Indicateur Driver Operation: Appareils TonePort & GuitarPort: Affiche la fréquence d'échantillonnage et la profondeur de bits à laquelle l'appareil fonctionne. (Aucun texte si l'appareil n'est pas en cours d'utilisation.) Attention, les appareils PODxt n'utilisent pas cette option donc aucun texte n'apparaît si un appareil PODxt est connecté. Ces appareils fonctionnent à une fréquence d'échantillonnage fixée donc la lumière "Sample Rate Converter" est toujours allumée si un appareil PODxt est connecté. Le PODxt toujours convertit la fréquence personnalisée à sa fréquence fixée. De même façon, la lumière SRC est aussi toujours allumée avec un appareil X3, sauf vous exécutez le pilote à 48kHz. Lock Format: La case à cocher "Lock Format" affecte deux choses: Toutes les applications WDM. La fréquence d'échantillonnage du hardware si ce n'est pas fixé par le hardware (comme X3 ou XT). Retiré de la page 3.4 du manuel d'utilisation Gearbox: "Lock Driver Format": Si coché, cette option force le pilote Line 6 de fonctionner à la fréquence d'échantillonnage et profondeur de bits entrés ci-dessous. Contrairement à l'utilisation de la fréquence d'échantillonnage demandé par l'application audio. Attention, Lock Format n'affecte pas le pilote ASIO. Toutes les fréquences d'échantillonnage fonctionnent même si Lock Format est coché. Pour les appareils TonePort, Lock Format verrouille le hardware à la fréquence d'échantillonnage donné. Si le logiciel ASIO demande une fréquence d'échantillonnage différente, notre pilote effectue la conversion de fréquence d'échantillonnage nécessaire. ASIO Settings: La section ASIO Settings affiche les réglages vous exécutez le pilote ASIO réellement. Retiré de la page 3.3/3.4 du manuel d'utilisation Gearbox: ASIO Client: Si vous exécutez un programme qui utilise l'appareil Line 6 comme carte de son ASIO, le nom du logiciel apparais ici. S'il n'est pas utilisé d'un logiciel ASIO, "none" sera affichée ici. Default Buffer Size: Ce montre la taille de buffer ASIO en utilisation. Cet espace est seulement active si utilisé par une application ASIO. Cette taille de buffer ASIO affectera la réactivité et latence du audio. Abaissement de cette option améliore la réactivité mais l'utilisation du processeur augmente et on risque le décrochage du son. Augmentez ce valeur si vous recevez du audio inconsistant dans le logiciel audio. Normalement, 512 est un réglage bon moyenne. Default Bit Depth: Ce montre la profondeur de bits ASIO en utilisation. Cet espace est seulement active si utilisé par une application ASIO. Utilisez le plus haut réglage que votre logiciel ASIO soutient pour garantir une haute qualité audio. Sample Rate Converter: Les TonePorts soutiennent les fréquences d'échantillonnage 44.1 et 48kHz nativement. Certains TonePorts soutiennent 88 et 96kHz aussi avec un convertisseur de fréquence d'échantillonnage interne. L'indicateur s'allume si ce convertisseur est active, que peut-être n'importe quand votre logiciel ASIO demande une fréquence d'échantillonnage différente que laquelle votre appareil soutient nativement. Le TonePort UX8 soutient les fréquences d'échantillonnage 44.1, 48, 88.2 et 96kHz nativement que veut dire que ces fréquences d'échantillonnage ne sont pas converties. Le tab Inputs and Recording: Retiré de la page 3.5 du manuel d'utilisation Gearbox: Input Source Select: C'est un réglage reflète du Source Select dans l'application GearBox, ce réglage vous permet de sélecter quel entrée physique est utilisée sur l'appareil. Attention, ce réglage est seulement sélectionnable si le logiciel GearBox n'est pas en cours d'utilisation de l'appareil. Si GearBox est en cours d'utilisation, il reste grisé mais affiche la source actuelle du GearBox. Si GearBox n'est pas en cours d'utilisation, cette sélection vous offre une liste des options d'entrées. GuitarPort et PODxt sont fixés ici, ils font passer seulement le signal d'entrée 6.35mm "Instrument" dans le GearBox. Donc, si un GuitarPort ou PODxt est l'appareil choisis, cette liste Input Source Select a uniquement "Instrument" comme source. Le TonePort UX8 a un nombre plus vaste des options. Veuillez visiter le tab Inputs & Recording.
  2. 1. Plug the Variax into the PODxt Live Variax input 2. Press the OUTPUT MODE b\utton and scroll the SELECT knob until you see MIDI/VARIAX. Use the fourth soft black button under VARIAX to activate input 3. Press the EDIT button. Scroll the SELECT knob clockwise to the very last page. 4. Change Variax models by highlighting MODEL with a soft button under the main LCD screen and use the tweak knob to the right of the screen. 5. Parameters are saved per patch and settings are reinforced when the patch is loaded. NOTE about Alternate Tunings: Alternate tunings are part of your Variax customization in Workbench and called up within a PODxt Live patch with the customized guitar model. To select or customize tuning in Workbench: 1. Click PRESET (1) at the bottom left hand corner of the editor screen. 2. Select 'Alternate Tuning' preset, load, and close. 3. Click SEND (2) and apply setting to one of your custom guitars. In the illustration I used Custom Lester Model 2*1 4. Go back to the Workbench Main Page and SYNC your Variax with the changed setting’ 5. You can now exit Workbench. On the PODxt Live: Select the model you wish to load & save patch to desired location.
  3. Line6Tony

    GearBox: MIDI CC Reference Chart

    Q: Can I change presets via a MIDI Continuous Control (CC) in the Gearbox program? A: No, but you can control most of the other functions in gearbox by referring to the GearBox Continous Control (CC) MIDI list attached to this document. You will need to know how to program your external MIDI Control device control knob/swtich to the corresponding MIDI CC value for the parameter GearBox you wish to control. gearbox midi cc.pdf
  4. Q: How do I turn on/off the Flextone's Noise Gate? A: On the original Flextone, just hold down the Tap Tempo button and rotate the Effects Select knob to Bypass to turn it off, or anything other than Bypass to turn it on. In firmware versions earlier than 1.4, the noise gate defaults to ON, 1.4 or later defaults to noise gate OFF. On the Flextone II, hold the tap tempo button and turn the REVERB button past 12 o'clock to turn the noise gate on, below 12 o'clock to turn it off.Q: Q: When I'm using the Flextone with the controller, why can't I turn on (insert effect name here)? A: Because the Flextone doesn't have as much raw processing power as the Vetta, it cannot run all of the different effects at the same time. You're limited to only one of the selections on the Effect Select knob per patch (Reverb is always available, though). If a patch is saved with, say, Delay/Flange 1 enabled, there's no way you can turn on a Rotary Speaker effect in that patch. You can, however, create an adjacent patch that is identical, except for the effects selection. Q: Do I need the Line6 Floor Board (Flextone I and II) or FBV controller (Flextone III) to access the 36 channels of the Flextone Series? A: Yes. The Line 6 controller will not only enable you to access all of the banks and channels in your Flextone amplifier, but the controller will also give you the ability to turn individual effects off and on, access the tuner and tap tempo functions, and includes a wah and volume pedal. Q: How do I find out the software version of my Flextone? A: In order to find out the software version of your Flextone, simply hold down the "C" button while you turn the amp on. If you continue to hold the "C" button down, you will notice that the "D" button will blink once or twice and then the "SAVE" button will blink a number of times. The number of times the "D" button blinks indicates the release number and the number of times the "SAVE" button blinks indicates the sub-release. For example, if the "D" button blinks once and the "SAVE" button blinks four times, this indicates software version 1.4. Q: How do I find out the stored settings in a particular Flextone Patch? A: To find out the stored settings in any given Flextone program, hold down the SAVE button while turning a knob. The Manual button will light until you reach the knobs stored setting, at which time the Manual light will turn off and the location of the knob will reflect it's stored setting. Hold down SAVE and TAP to view the secondary settings. Q: Can I download tones to my Flextone? A: If your amp is an original Flextone series, then Line 6 Edit software will not work, as there is no MIDI on these models. If it's a Flextone II or III series, you're in luck. You'll need a Mac or PC computer with a MIDI interface capable of handling large MIDI transfers. You can then download the tones from www.customtone.com to the amp, via the free Line 6 Edit software. Q: Will my Flextone II/III plus power a 4x12 cabinet? If so, about how many watts would this be? A:It's fine to connect a 4x12 cabinet to the Flextone II/III Plus, make sure the cab is set to "8 ohm mono ( Left only )" to protect your Flextone plus. The total watts connected in the manner will be about 50 watts per side 100 watts total. You can also use a Power amp and external cab with the Flextone II/III Plus by connecting from the XLR left mono line out to the power amp and on to the speaker cab. Q: What are the differences between Flextone models? A: The main differences between the Flextone, Flextone Plus and, Flextone XL lie mainly in the amplifiers' speaker configurations and wattage. The Classic Flextone comes with one 12 inch Celestion speaker along with one 75 watt amp to power it. The Flextone Plus also comes with one 12 inch Celestion speaker but has two 75 watt amps, one to power the existing speaker and one to power an extension cabinet through the Flextone's cabinet extension jack. Alone the amp will run at 75 watts. However, with the extension cabinet, the amp will run at 150 watts. The Flextone XL comes complete with two 12 inch Celestion speakers and two 75 watt power amps that put out a combined 150 watts of power. The original Flextone HD has two channels of 150 watts each into a 4 ohm load and 100 watts into 8 ohms, but lower impedance loads should be avoided . The amplifier will drive a 16 ohm load, but will not be as loud as if it were driving an 8 ohm load. The Flextone II HD is 100 watts per side at 4, 8, or 16 (switchable) ohms. The software within the Flextones are basically the same in each model as well as each generation. The main change is with the tones. At Line 6, we try to recreate as close as possible, the tone we are modeling to the original amp. As the modeling software for the POD and POD XT has become more accurate, these same characteristics have been passed along to our series of Flextone amps. As well as tonal changes, we've also added some new modeling in the newer versions of the software. The original Flextone comes stock with 16 amp models while the Flextone II and III families come with 32. The Flextone II also has 36 user presets instead of 12, 15 mix and match Cabinet Models, MIDI In and Out and most knobs have a secondary function. Plus, the Flextone II Plus, XL and HD feature external speaker outs and XLR outputs that can be used to connect the amp directly to a mixer. See your user manual for more information. Q: Can I use a MIDI controller with my Flextone amp? A: The Flextone will respond to MIDI Program Change and MIDI Sysex messages when used with an external MIDI controller. For more details on how MIDI functions with your Flextone download the user manual. Q: What upgrades are available for my Flextone amplifier? A: Unfortunately, for Flextone I, II and II HD owners, Line 6 no longer has or produces EPROM upgrade chips. For Flextone III users, certain Flash Memory updates can be made via our Line 6 Monkey software with your computer through a USB to MIDI interface. After updating to 1.1, you may see different behavior in the effects on some Flextone III amps. Why only some? Flextone III had a minor change to its OTP (one time programmable) BIOS chip after several months in production (from version 1.00 to version 1.02. Nobody knows what happened to 1.01, and nobody likes to talk about it). This change affected the way some of the effects controls respond when an effect is loaded. None of the functionality was lost, and patches that you've stored are not changed. Flex III's behavior on recalling stored channels has not changed at all. How can I tell if my amp is going to change behavior or not? If you power up holding down the 'B' channel select button, the LED on the 'B' button will blink to indicate the major revision (in this case, it will blink once) and the LED on the 'D' button will blink to indicate the sub-release (in this case either it will blink twice or it won't blink at all). If this indicates that you have 1.00, your amp's behavior will not change from what it has been. If it indicates 1.02, it will change be as follows: The only change that you should see is that, on the affected (1.02 OTP) amps, when you first select an effect from edit mode (in other words, when you're first editing channel settings), its setting will reflect the current knob position, rather than an arbitrary default, and on two of the effects. You will also notice that the Tweak and 2nd Function controls are not reversed for the Chorus and Flanger effects. The changed control functions become Depth and Rate (Speed) instead of the previous Speed (Rate) and Depth/Feedback.
  5. Note: The Flextone II was released in 2000 and replaced by the Flextone III in 2003. The Flextone II is now a Legacy Product. Application Q: What are the presets on my Flextone II amplifier? A: The Flextone II are available from the manual download section. If you would like to return your unit to the original presets, please perform a factory reset (see the trouble shooting section). Q: What editing software works with the Flextone II? A: Line 6 Edit allows the deep editing of all the Flextone II presets. Line 6 Edit FAQ Q: How can I control my Flextone via MIDI? A: Please check the Appendix C on your Pilot's Handbook, you will have a list of MIDI program changes and their relation with the Flextone channels. So channel 1A would recall program 1 on your MIDI device. You can either overwrite program 1 on your device with the effects you want to use with channel 1A or you can go to the preset you want to use and internally reassign that preset to MIDI program 1 (if your device offer that option). You can also set the Expression pedal on a MIDI controller to the MIDI CC# you wish to control - for example if you want to control the Delay Mix with it set the CC# to 34. Q: How is the Flextone II different from the Flextone I? Are the older Flextone I amp models changed in any way, software-wise? A: The Flextone II XL has more amp models, more editing capabilities, XLR outs, external speaker outs, improved tone, and an improved power amp stage. The models in the Flextone II are changed from the Flextone I models. The new models match exactly the models in the POD 2.0, so that patches made on one are completely interchangeable with the other. Q: How can I find out which cabinet models are used by default for the amp models? A: Hold down the save and tap tempo buttons at the same time and switch between the cabinet models. The manual button will flash off when the selected cabinet model is passed on the knob. Q: What are the secondary functions for each of the Flextone II's knobs? A: The secondary function for each of the Flextone II's knobs is as follows: DRIVE: Drive Boost on/off BASS: Delay Feedback (how many times it repeats) MIDDLE: Delay Amount TREBLE: Presence on/off CHANNEL VOLUME: Volume Boost on/off REVERB: Noise Gate on/off EFFECT TWEAK: Tap Tempo time Q: How can I control the "Delay Level" on my Flextone II when using the Delay in conjunction with another effect? A: The Delay Level and Delay Feedback can be adjusted on the Flextone II by holding down the TAP TEMPO button and turning the MIDDLE knob for Delay Level and the BASS knob for Delay Feedback. Q: Will the delay feedback on the Flextone II series repeat indefinitely if it is turned all the way up? A: Yes. The delay feedback on the Flextone II series will repeat indefinitely if it is turned all the way up. To turn the delay feedback on the Flextone II all the way up, simply hold down the TAP TEMPO button while turning the BASS knob to 10. Setup/Connections Q: Does the Flextone II have a line out? A: The Flextone II has a headphone jack that doubles as a good direct out. To utilize it properly, you should use a stereo-to-dual mono insert cable and use it as a stereo out into 2 channels on your mixer/recorder. If you need XLR direct outs, you may want to check into a Flextone Plus or XL. Q: Which Line 6 floor controller(s) can I use with the Flextone II? A: Either the FB4 or Floorboard will control the Flextone II, but we recommend the Line 6 floorboard. Please be aware that the Line 6 Floorboard and FB4 are no longer in production but may still be special ordered or found through used gear dealers. Q: Does the Flextone II have an effects loop? A: Yes, the Flextone II has a stereo unbalanced effect loop, located before the Master volume. Q: What is an effect loop used for? A: An effect loop is used for “line-level” input and output level devices. Many rack mount effect units are line level units, while most guitar effects are “instrument level” units meant to be run between the instrument and the amplifier. Q: Can I connect an external pre-amp (i.e. Line 6 POD unit) to the Flextone II? A: You can connect an external preamp into the front of the unit or the effects loop return of the Flextone II. Be sure to use a ¼” dummy jack in the instrument input to send the amplifier output to the speakers. Q: How should I connect my speaker cabinet(s) to the Flextone II? A: : Please see the following document (or your manual) for more information on connecting cabinets to your Flextone II. Cabinet Connection and Ohm F.A.Q. Q: What speakers are used in the Flextone II? A: The Flextone II amplifiers shipped with Line 6 "tubetone" speakers, which were manufactured by Celestion. The speakers are 80 watts and either 8 or 16 ohms. See the Line 6 Store for replacement speakers. Registration/Warranty Q: What is the warranty on the Flextone II? A: The warranty on the Flextone II is twelve months from the date of purchase. Q: How can I register my Flextone II? Product Registration F.A.Q. Troubleshooting/Service Q: How can I check the version of software on a Flextone II? A:* Hold down the C button as you power up. The D channel will flash and then the SAVE channel will flash. The number of D flashes = X The number of Save flashes = .X So if the D flashes twice and the SAVE button flashes twice, your version is 2.2. Q: My guitar's sustain is cut off after several seconds. Is there a way to stop this? A: This is likely because of the noise gate on the Flextone II. To turn it off, hold the Tap Tempo button and turn the Reverb knob down. To turn it back on, hold Tap and turn the Reverb knob up. Q: How do I perform a factory reset on my Flextone II? A: The factory reset for a Flextone II is to hold the A B C D Buttons while powering the amp. Q: My amplifier will not store presets anymore. What can I do? A: We use a 3v lithium coin cell battery in the Flextone II to store the user presets, a common replacement is the Panasonic BR2325-1HG. The current battery will need to be de-soldered and replaced with a new battery. If you are not confident in doing this replacement, it should be performed by an authorized Line 6 Service Center. Q: My amp seems to be malfunctioning. What can I do as an end user? Line 6 Amp Troubleshooting Q: Where can I download a Flextone II manual? A: Line 6 Manuals
  6. Note: The Flextone (I) was released in 1997 and replaced by the Flextone II in 2000 and is now a Legacy Product. Application Q: What are the presets on my Flextone (I) amplifier? A: The Flextone ( I) preset chart in the manuals section. If you want to return the amplifier to factory specifications, please see the factory reset procedure at the bottom of this document. Q: Is there editing software that works with the Flextone (I) series? A: There is no editing software for the Flextone series, as there are no MIDI jacks on the original Flextone series. Q: How do I adjust the Delay Feedback on my Flextone HD? A: Adjusting the Delay Feedback is not possible on the Flextone HD. Setup/Connections Q: What are the models available for the Flextone (I)? Flextone (I): 60 Watt Mono 1 x 12" Combo Flextone (I) XL: 100 Watt Stereo 2 x 12" Combo Flextone (I) Duo: 100 Watt Stereo 2 x 10" Combo Flextone (I) Plus: 100 Watt Stereo 1 x 12" Combo Flextone (I) HD: 300 Watt Stereo Head Q: Does the Flextone (I) have a line out? A: The Flextone (I) has a headphone jack that doubles as a good direct out. To utilize it properly, you should use a stereo-to-dual mono insert cable and use it as a stereo out into 2 channels on your mixer/recorder. If you need XLR direct outs, you may want to check into a Flextone (I) Plus or XL. Q: Which Line 6 floor controller(s) can I use with the Flextone (I)? A: Either the FB4 or Floorboard will control the Flextone I, but we recommend the Line 6 floorboard. Please be aware that the Line 6 Floorboard and FB4 are no longer in production but may still be special ordered or found through used gear dealers. Q: Does the Flextone (I) have an effects loop? A: Yes, the Flextone I units have a stereo unbalanced effect loop (the Flextone 112 is a mono effect loop), located before the Master volume. Q: What is an effect loop used for? A: An effect loop is used for “line-level” input and output level devices. Many rack mount effect units are line level units, while most guitar effects are “instrument level” units meant to be run between the instrument and the amplifier. Q: Can I connect an external pre-amp (i.e. Line 6 POD unit) to the Flextone (I)? A: You can connect an external preamp into the front of the unit or the effects loop return of the Flextone I. Be sure to use a ¼” dummy jack in the instrument input to send the amplifier output to the speakers. Q: How should I connect my speaker cabinet(s) to the Flextone (I)? A: Please see the following document (or your manual) for more information on connecting cabinets to your Flextone I. Cabinet Connection and Ohm F.A.Q. Q: What brand of speakers were used in the Flextone (I)? A: Eminence brand speakers custom made for Line 6. Registration/Warranty Q: What is the warranty on the Flextone (I)? A: The warranty on the Flextone I is twelve months from the date of purchase. Q: How can I register my Flextone (I)? Product Registration F.A.Q. Troubleshooting/Service/Upgrades Q: My guitar's sustain is cut off after several seconds. Is there a way to stop this? A: This is likely because of the noise gate on the Flextone. To turn it off, hold the Tap Tempo button and turn the Reverb knob down. To turn it back on, hold Tap and turn the Reverb knob up. Q: How do I perform a factory reset on my Flextone (I)? A: the factory reset for a Flextone I is to hold the A B C D Buttons while powering the amp. Q: Can a Flextone (I) be upgraded to a Flextone II? A: Unfortunately not. We are always trying to make our amps better and add features that are requested by our users. When we decided that it was time to make some changes to the Flextone amp, we found that the most requested features were things like midi and XLR outputs. To make these additions we found that we had to make significant hardware and software changes. We had to change the whole layout of the amplifier, as you can see from all of the new connectors on the rear panel. Since the Flextone II software will not work in the Flextone I amp and replacing the chassis would approach the cost of a new amp, we aren't able to offer a practical upgrade path. Q: My amp seems to be malfunctioning. What can I do as an end user? Line 6 Amp Troubleshooting Q: Where can I get replacement knobs/speakers/logos for my Line 6 amplifier? A: Line 6 Store Q: Where can I download a Flextone (I) manual? A: Line 6 Manuals
  7. Note: The Flextone III was released in 2003 and discontinued in 2010. The Flextone III is now considered a Legacy Product. Q: Where can I find the original feature information on the Flextone III? A: Flextone III Product Info Application Q: What are the presets on my Flextone III amplifier? A: The Flextone III preset chart is in the manuals section. If you want to return the amplifier to factory specifications, please see the factory reset procedure at the bottom of this document. Q: What editing software works with the Flextone III? A: Line 6 Edit allows the deep editing of all 36 presets on the Flextone III series amplifier. Line 6 Edit FAQ Q: How can I transfer sysex information from a Flextone III? A: There are 3 special hidden functions on the Flextone III that will transmit a Sysex message that can be recorded by a MIDI application, or sent to another Flextone III amplifier. 1. Presets & Amp Setups - To transmit all of your custom presets and Amp Defaults: press and hold theTap Tempo, Comp & Mod Select buttons while powering up the amp. Connect the MIDI out of the source amp to the MIDI In of your computer or another amp. Press the Delay Select button to send the message. 2. The Whole Enchilada - To transmit the entire memory of the amplifier including your custom presets, amp setups, and DSP software, (the brains behind the operation): press and hold the Tap Tempo, Gate & Mod Select buttons while powering up the amp. Connect the MIDI out of the source amp to the MIDI In of your computer or another amp. Press the Mod Select button to send the message. 3. The Edit Buffer - To transmit the current state of the amp, press and hold theTap Tempo and any of the A, B, C or D buttons. Q: Can I transfer Flextone II presets to a Flextone III amp? A: No, the presets are not compatible between the Flextone II and Flextone III amps. Flextone II tones are only compatible with Flextone II, POD 2.0, and POD Pro devices. Flextone III tones are only compatible with Flextone III, HD147, and PODxt devices. Q: How can I control my Flextone III via MIDI? A:Please check the Appendix C on your Pilot's Handbook, you will have a list of MIDI program changes and their relation with the Flextone III channels. So channel 1A would recall program 1 on your MIDI device. You can either overwrite program 1 on your device with the effects you want to use with channel 1A or you can go to the preset you want to use and internally reassign that preset to MIDI program 1 (if your device offer that option). You can also set the Expression pedal on a MIDI controller to the MIDI CC# you wish to control - for example if you want to control the Delay Mix with it set the CC# to 34. Please see the top of this document to download the Flextone III manual. Q: How do I change the tuner's reference frequency on the Flextone III? ? A: The Flextone III's Tuner Reference Frequency cannot be changed - it's 440 all the way. Setup/Connections Q: Is there a direct out on the Flextone III? A: There are stereo XLR outputs on the back of the unit to route the cabinet modeling directly to a PA or mixing console. Q: Which Line 6 floor controller(s) can I use with the Flextone III? A: We recommend the Line 6 FBV Shortboard, but any of the FBV controllers will control the Flextone III. Q: Does the Flextone III have an effects loop? A: Yes, the Flextone III has a stereo unbalanced effect loop. Q: What is an effect loop used for? A: An effect loop is used for “line-level” input and output level devices. Many rack mount effect units are line level units, while most guitar effects are “instrument level” units meant to be run between the instrument and the amplifier. Q: Can I connect an external pre-amp (i.e. Line 6 POD unit) to the Flextone III? A: You can connect an external preamp into the or the effects loop return of the Flextone III. Be sure to use a ¼” dummy jack in the instrument input to send the output to the speakers. Q: How should I connect my speaker cabinet(s) to the Flextone III? Cabinet Connection and Ohm F.A.Q. Q: Can you change the cabinet models on the Flextone III? A: Like the Flextone II, the Flextone III allows you to choose whatever cabinet model you want to go with your chosen amp model. A 100 watt Marshall through a 6 in. Supro speaker you say? You can - you know, if you're into that sort of thing... Seriously though, depress the amp model selector and start a-twistin'. You'll see GREEN lights, indicating that the cab model is being edited. There are 15 cabinet models to choose from, with the smallest starting at "Line 6 Crunch". Turn the knob clockwise and you'll get increasingly larger cab models until you land on a big ol' Mesa Boogie 4X12 found under "Gib Explorer". Turn to "Line 6 Clean" to bypass the cabinet models. It's all spelled out in the manual on page 3*28. Cabinet models can also be chosen via MIDI Continuous Controller #71 using values of 0-15, if you're inclined that way. Q: Will my Flextone III Plus power a 4x12 cabinet? A: It's fine to connect a 4x12 cabinet to the Flextone III amplifier, please ensure the cabinet is set to "8 ohm mono ( Left only )" to protect your Flextone. Please follow the directions on the unit or the manual to ensure there will be no damage to your unit. Q: What are the FBV controller functions? (some functions will not apply on the shortboard): A: Flextone III units with Flash memory 1.10, BIOS 1.02 FX LOOP- toggles effects loop on/off. STOMP BOX 1: No function on the flextone STOMP BOX 2: No function on the flextone STOMP BOX 3: toggles Noise Gate on/off AMP 1: Toggles speaker emulation on/off AMP 2: No function on the flextone REVERB: Toggles Reverb on/off TREMOLO: Toggles Compressor on/off MODULATION: Toggles Modulation effects on/off DELAY: Toggles Delay on/off TAP TEMPO: Sets Tap Tempo and Tuner BANK UP; One bank up BANK DOWN: One bank down CHANNEL A/B/C/D: Selects the corresponding channel FAVORITE: Recalls a channel of choice that can be programmed (see the manual) Q: Can the FBV shortboard expression pedal be reassigned to a tweak function? A: Unfortunately no, the volume pedal on the FBV shortboard can not be reassigned. Specifications Q: What's the rated wattage of my Flextone III? A: The Flextone III plus (1x12) and XL (2x12) units both have a 150-watt stereo power amp (75-watts with the internal 1x12 and 150-watts when used with external cab). The original Flextone III (no longer in production) had a 75 watt power amp that only powered the internal speaker. Q: What are the speakers used in the Flextone III series? A: Line 6 speakers are custom built by Celestion to provide the flattest speaker response in combination with amp modeling. These speakers can be ordered directly the Line 6 Store. Registration/Warranty Q: What is the warranty on the Flextone III A: The warranty on the Flextone III is twelve months from the date of purchase. Q: How can I register my Flextone III? Product Registration F.A.Q. Troubleshooting/Service Q: How do I perform a factory reset on my Flextone III? A: The factory reset for a Flextone III is to hold the A and D Buttons while powering the amp. Q: How do I update the Flash on my Flextone III? A: See the following links before reflashing your Flextone III: Line 6 Monkey Installation and F.A.Q. MIDI: Functionality, Control, and Connectivity with Line 6 devices 1) Run Line 6 Monkey and connect to your Flextone III using the information provided in the links above. select the "Updates"tab, then select "Flash Memory", then "Update Selection". 2) If Monkey asks you to register, just click "Remind Me Later" 3) Monkey will ask if you want to continue, select "Yes" 4) Accept the software agreement, then select "OK" 5) Select your preference of how to deal with your current presets, then select "OK" 6) Select "Yes" to update the Flash on your Flextone III 7) Monkey will read the patches on your Flextone III 8) Monkey will then update the new flash memory to your Flextone III 9) Turn your amplifier off and on as instructed 10) Your unit is now updated. Q: My amp is locked up (i.e. most/all the lights are on) and it will not function correctly. Can I put the amp in a "safe mode" to reflash using Line 6 Monkey? A: Hold down A as you power up the amp to get into safe mode, then run the Monkey and reflash the firmware. Flextone III and Line 6 Edit Compressor Issues There is a known issue regarding the function of the compressor in Line 6 Edit with a Flextone III. A. The Comp button on the Amp and in Edit respond appropriately. B. The single Comp knob in Edit will control the Comp Amount or Gain (there is no Amp control for this) C. Holding down the Comp button on the Amp and turning Delay or Mod knob on the Amp controls the Comp Threshold and not the Amount (there is no control in Edit for this). Threshold is interactive with Drive and Tone controls - e.g.: If Drive and Bass controls are near maximum, you may need to adjust the Threshold to a higher level to avoid sounding too "squashed". This is where you'd use the Line 6 Edit control. Just to clear things up, you will not see Line 6 Edit's COMP knob move while you hold down COMP and turn the MOD button on the Flextone. You can use "Get Edit Buffer" before saving your tone. This will assure that adjustments made to the Comp Gain on the amp are retained in the Tone (though it isn't shown onscreen, the value that's set on the Amp is kept in the patch.) Q: It seems as if the effects on my Flextone III are behaving differently since I updated to the 1.1 software A: After updating to 1.1, you may see different behavior in the effects on some Flextone III amps. Why only some? Flextone III had a minor change to its OTP (one time programmable) BIOS chip after several months in production (from version 1.00 to version 1.02). This change affected the way some of the effects controls respond when an effect is loaded. None of the functionality was lost, and patches that you've stored are not changed. Flex III's behavior on recalling stored channels has not changed at all. How can I tell if my amp is going to change behavior or not? If you power up holding down the 'B' channel select button, the LED on the 'B' button will blink to indicate the major revision (in this case, it will blink once) and the LED on the 'D' button will blink to indicate the sub-release (in this case either it will blink twice or it won't blink at all). If this indicates that you have 1.00, your amp's behavior will not change from what it has been. If it indicates 1.02, it will change be as follows: On the affected (1.02 OTP) amps, when you first select an effect from edit mode (in other words, when you're first editing channel settings), its setting will reflect the current knob position, rather than an arbitrary default, and on two of the effects. You will also notice that the Tweak and 2nd Function controls are not reversed for the Chorus and Flanger effects. The changed control functions become Depth and Rate (Speed) instead of the previous Speed (Rate) and Depth/Feedback. Q: My amp seems to be malfunctioning. What can I do as an end user? Line 6 Amp Trouble Shooting Q: Where can I download a Flextone III manual? A: Line 6 Manuals
  8. Français Deutsch Q: What is MIDI? A: MIDI stands for Musical Instrument Digital Interface and is a way for electronic instruments to communicate with each other. For a full definition on MIDI and its applications, check out these links: midi.org Wikipedia Many Line 6 products are equipped with MIDI inputs and outputs, which can receive control messages by another external MIDI device. Some of the most commonly used MIDI controllers are: Voodoo Labs Ground Control Behringer FCB1010 Q: Can I adjust the values of the MIDI information on my Line 6 device? A: No, you can not adjust the values on most Line 6 products that receive MIDI information, issues with communication are generally resolved by programming the sending unit correctly. The Line 6 device only knows that when you send it MIDI MESSAGE "A" it will do ACTION "A". Since this can not be changed in most Line 6 products, you need to make sure that your foot controller (or other controlling device) is sending MIDI MESSAGE "A". Please refer to your Line 6 user manual (or downoad) for a list of all MIDI events pertaining to your product. Q: Where can I find the MIDI CC Reference Guide for Line 6 gear? A: MIDI Continuous Controller Reference Q: How can I connect my Line 6 device to my computer if I only have MIDI ports on the unit? A: To connect your MIDI capable Line 6 device to your computer, you will need: 1) A computer with a MIDI interface or a MIDI-to-USB interface, such as the M-Audio Uno. 2) Please ensure that you have the interface's latest drivers installed on your computer. We recommend downloading the drivers directly from the manufacturer's website and installing the drivers BEFORE connecting your USB-MIDI interface. Consult the manufacturer's website for the correct installation and troubleshooting procedures to ensure your drivers are installed correctly. 3) Download and install the latest version of Line 6 Monkey if it is not already installed to your computer. See the following link for more information on installing Line 6 Monkey: Line 6 Monkey Installation and F.A.Q. 4) Connect your Line 6 device to the MIDI Interface, making sure the cables are connected correctly. The MIDIsport Uno will be labeled "to MIDI in" and "to MIDI out". Traditional MIDI connections will have the Line 6 device MIDI IN to interface MIDI OUT, and the Line 6 device MIDI OUT to interface MIDI IN. 5) Turn your Line 6 device ON and open Line 6 Monkey. Monkey should be able to detect the Line 6 device right away. If Monkey cannot detect the Line 6 device, please ensure the drivers for the interface are properly installed, the cables are connected correctly (as described in step 4), and the MIDI Ports were selected correctly. Here is what you would need to configure if you see a "no device" message" A: Select "Connect Using MIDI Cables" B: Here is what the MIDI Port selection should look like with a MIDI Sport Uno. Once the MIDI In, Out, and your device are selected, hit "Ok": Your device should now be recognized. select the unit then select "OK". 6) You are now ready to edit/back up your tones, reinstall flash memory, or experiment with tones from customtone.com. See the following link for more information on editing your MIDI capable device with Line 6 edit: Line 6 Edit FAQ See the following link for more information on backing up your MIDI capable device with Line 6 Monkey: Line 6 Monkey Installation and F.A.Q. Trouble shooting: Q: I am receiving the message "(Code 8000900C) MIDI device timed out waiting for a response." possible resolutions * Reinstall the USB-MIDI device drivers from the manufacturer's website * check to ensure the sockets are snug and connected to the correct jacks * Remove any USB hubs, connect the USB-MIDI device directly to the back of the computer * connect an ethernet cable to the computer and turned off any wireless modem cards See the following link for more computer optmiziation tips: Computer System Optimization MIDI: Funktionalität, Kontrolle und Konnektivität mit Line 6 Geräten Was ist MIDI? MIDI steht für Musical Instrument Digital Interface und ist ein Weg der Kommunikation zwischen elektronischen Instrumenten. Für eine vollständige Definition von MIDI und dessen Anwendungsmöglichkeiten, besuchen Sie diese Seiten: midi.org Wikipedia Viele Line 6 Produkte sind mit MIDI Ein- und Augängen ausgerüstet, sie können also Kontrollbefehle von anderen externen MIDI Geräten erhalten. Weit verbreitete MIDI Controller sind z.B.: Voodoo Labs Ground Control Behringer FCB1010 Kann ich die Werte der MIDI Informationen auf meinem Line 6 Gerät verändern? Nein, Sie können diese Werte auf den meisten Line 6 Geräten, die MIDI Informationen erhalten sollen, nicht ändern. Probleme mit der Kommunikation können meist durch die Programmierung der sendenden Einheit gelöst werden. Das Line 6 Gerät weiß nur, dass wenn Sie ihm MIDI Befehl A senden, dass es die Aktion A ausführen soll. Da dies in den meisten Line 6 Geräten nicht verändert werden kann, sollten Sie sicherstellen, dass Ihr Fußpedal (oder kontrollierendes Gerät) die Nachricht A auch sendet. Bitte berufen Sie sich auf das Line 6 Benutzerhandbuch für eine Liste aller MIDI Befehle, die Ihr Produkt betreffen. Wo kann ich den MIDI CC Reference Guide for Line 6 gear finden? MIDI Continuous Controller Reference Wie kann ich mein Line 6 Gerät mit meinem Computer verbinden, wenn ich nur MIDI Anschlüsse habe? Um Ihr MIDI Gerät en den Computer anzuschließen brauchen Sie: Einen Computer mit MIDI Schnittstelle oder einen USB-MIDI Adapter, wie z.B. MIDI Sport Uno Die neusten Treiber für die Schnittstelle. Wir empfehlen dazu die Webseite des Herstellers der Schnittstelle aufzurufen und dort den Treiber herunterzuladen und zwar BEVOR Sie die Schnittstelle anschließen. Auf der Webseite des Herstellers sollten Sie außerdem Problemlösungen und Installationsprozeduren finden. Überprüfen Sie dann ob der Treiber korrekt installiert ist. Laden Sie sich die neuste Version von Line 6 Monkey herunter und installieren Sie diese. Hier finden Sie mehr Informationen über die Installation und ein F.A.Q. zu Monkey: Line 6 Monkey: Installation und häufig gestellte Fragen Verbinden Sie nun Ihr Line 6 Gerät mit der MIDI Schnittstelle, stecken Sie die Kabel korrekt ein. Das MIDI Sport Uno wird dann angezeigt als "to MIDI in" und "to MIDI out". Bei standardmäßigen MIDI Schnittstellen muss der MIDI Eingang des Line 6 Gerätes an den MIDI Ausgang des MIDI Gerätes gesteckt werden und der MIDI Ausgang des Line 6 Gerätes and den MIDI Eingang des MIDI Gerätes. Starten Sie Ihr Line 6 Gerät und dann öffnen Sie Monkey. Monkey sollte in den meisten Fällen Ihr Gerät sofort erkennen können. Wenn Monkey das Gerät nicht erkennt sollten Sie die installierten Treiber überprüfen und nachsehen ob die Kabel korrekt eingesteckt sind. Line 6 Edit: FAQ Und diesen Link für weitere Informationen zur Sicherheitskopie via Line 6 Monkey: Line 6 Monkey: Installation und häufig gestellte Fragen Fehler: Ich bekomme die Nachricht: "(Code 8000900C) MIDI device timed out waiting for a response." Mögliche Behebung: Installieren Sie die Treiber des MIDI Gerätes von der Internetseite des Herstellers neu. Überprüfen Sie die Sockel und ob die Stecker korrekt eingesteckt sind. Entfernen Sie alle USB Hubs und stecken Sie das USB-MIDI Interface direkt hinten in Ihren PC. Verbinden Sie Ihren Computer per LAN Kabel ans Internet und deaktivieren Sie jegliche kabellose Modem Karten. Besuchen Sie die folgende Adresse für weitere Informationen zur Optimierung Ihres Computers: Audiooptimierung für das Computersystem MIDI: Fonctionalité, contrôle et connectivité avec les appareils Line 6 Qu'est-ce que MIDI? MIDI veut dire: Musical Instrument Digital Interface et est une façon de communiquer des instruments électroniques un avec l'autre. Pour une définition complète, visitez: http://www.midi.org/ (Anglais) http://fr.wikipedia.org/wiki/MIDI Beaucoup de produits Line 6 ont des entrées et sorties MIDI sui peuvent recevoir des messages de contrôle des autres appareils MIDI externes. Très fréquent contrôleurs MIDI: (liens en anglais) Voodoo Labs Ground Control Behringer FCB1010 Puis-je ajuster les valeurs d'information MIDI sur mon appareil Line 6? Non, vous ne pouvez pas ajuster valeurs sur la plupart des appareils Line 6 qui reçoivent des informations MIDI. Les problèmes de communications sont généralement résous par programmer l'unité d'émission correctement. Le périphérique Line 6 seulement fait l'action A si vous envoyez la message MIDI A. Puisque ca ne peut pas être changé, assurez vous que le commutateur au pied (ou autre appareil de contrôle) enverra message MIDI A. Veuillez consulter votre guide d'utilisation Line 6 pour une liste de tous les événements Line 6 qui concernent votre produit. Où est-ce que je peux trouver le "MIDI CC Reference Guide" pour les périphériques Line 6? MIDI Continuous Controller Reference Comment est-ce que je connecte mon appareil Line 6 à mon ordinateur si j'ai seulement des ports MIDI sur mon appareil? Pour connecter via MIDI, vous avez besoin de: Un ordinateur avec interface MIDI ou un adaptateur USB-à -MIDI comme le MIDI Sport Uno. Installez les pilotes les plus récents du appareil sur votre ordinateur. Nous recommandons de télécharger les pilotes directement du site web du fabricant et installez les avant vous connectez l'interface USB-MIDI. Consultez le site web du fabricant pour recevoir des informations concernant le pilote, l'installation et dépannage. Téléchargez et installez la dernière version de Line 6 Monkey si ce n'est pas encore installé. Cliquez le lien suivant pour des informations Line 6 Monkey: Line 6 Monkey Installation and F.A.Q. Connectez votre appareil Line 6 à l'interface MIDI, branchez les câbles correctement. Le MIDI sport Uno sera étiqueté "to MIDI on" et "to MIDI out". Les connexions MIDI traditionnels seront: appareil Line 6 MIDI IN à interface MIDI OUT et l'appareil Line 6 MIDI OUT à interface MIDI IN. Allumez l'appareil Line 6 et ouvrez Line 6 Monkey. Monkey devrait être capable de détecter l'appareil Line 6 automatiquement. Si Monkey ne trouve pas l'appareil Line 6, vérifiez le pilote de l'interface, les câbles et les ports MIDI. Line 6 Monkey Installation and F.A.Q. Résolution des problèmes: Je reçois le message "(Code 8000900C) MIDI device timed out waiting for a response." Solution possible: Réinstallez les pilotes de l'appareil MIDI du site web du fabricant. Vérifiez les sockets sont connectés correctement aux jacks exactes. Détachez tous les hubs USB, connectez l'appareil USB-MIDI directement à l'arrière de l'ordinateur. Connectez un câble LAN à l'ordinateur à la place de l'internet sans fil et désactivez les cartes modems sans fil. Cliquez ce lien pour plus d'information sur l'optimisation de l'ordinateur: Optimisation du système ordinateur
  9. Pedal Inputs The pedal inputs on the UX2 and KB37 are for momentary switches only (like the keyboard sustain pedal used with a synthesizer or digital piano). They're used to step up and down through presets or to control start/stop and other MIDI Machine Control functions (MMC) audio recording application Transport Controls. Other parameters can be controlled within the software, but to do that you need an external MIDI source (like a programmable MIDI foot controller plugged into your computer's MIDI interface). GearBox Wah Control In GearBox under Edit/Preferences/Midi tab select your midi interface ports IN and OUT. Set your midi controller pedal to CC# (continues controller number) to CC# 4. This should engage the wah function in GearBox.
  10. Application Q: What are the presets on my HD147 amplifier? A: The HD147 user presets are available from the manual download section. Q: What editing software works with the HD147? A: Line 6 Edit, which is a free download at www.line6.com/software. Q: How can I control my HD147 via MIDI? A: Please check the Appendix C on your Pilot's Handbook, you will have a list of MIDI program changes and their relation with the HD147 channels. So channel 1A would recall program 1 on your MIDI device. You can either overwrite program 1 on your device with the effects you want to use with channel 1A or you can go to the preset you want to use and internally reassign that preset to MIDI program 1 (if your device offer that option). You can also set the Expression pedal on a MIDI controller to the MIDI CC# you wish to control - for example if you want to control the Delay Mix with it set the CC# to 34. Please see the bottom of this document to download the HD147 manual. Setup/Connections Q: Is there a direct out on the HD147? A: There are stereo XLR outputs on the back of the unit to route the cabinet modeling directly to a PA or mixing console. Q: Which Line 6 floor controller(s) can I use with the HD147? A: We recommend the Line 6 FBV Shortboard , but any of the FBV series controllers will control the HD147. Q: Does the HD147 have an effects loop? A: Yes, the HD147 has a stereo unbalanced effect loop. Q: What is an effect loop used for? A: An effect loop is used for “line-level” input and output level devices. Many rack mount effect units are line level units, while most guitar effects are “instrument level” units meant to be run between the instrument and the amplifier. Q: Can I connect an external pre-amp (i.e. Line 6 POD unit) to the HD147? A: You can connect an external preamp into the or the effects loop return of the HD147. Be sure to use a ¼” dummy jack in the instrument input to send the head output to the speakers. Q: How should I connect my speaker cabinet(s) to the HD147? A:Please see the following document more more information on connecting cabinets to your HD147. Cabinet Connection and Ohm F.A.Q. Specifications Q: What's the rated wattage of my HD-147? A: The HD-147 is rated at 150w/channel RMS. 147 decibels is the level of loudness at which your head explodes. What we're trying to say is that this puppy is loud. Q: How many watts are my two 16 ohm cabs going to pull per side with my HD-147? A: A solid state amp without an impedance switch puts out more power with a lower speaker load. However, we do have an impedance switch in the back of the amp. The purpose of the switch is to make sure the amp puts out the same amount of power as long as it sees the correct load. So for your set up, you would plug one cab into one of the RIGHT jacks and the other into one the LEFT jack. Set the impedance switch to 16 ohms. Your amp should put out 150 watts per side. Registration/Warranty Q: What is the warranty on the HD147? A: the warranty on the HD147 is twelve months from the date of purchase. Q: How can I register my HD147? A: Registration Troubleshooting/Service Q: How do I perform a factory reset on my HD147? A: The reset for a HD147 is to hold the A and D Buttons while powering the amp. Q: My amp seems to be malfunctioning. What can I do as an end user? Line 6 Amp Trouble Shooting Q: Where can I get replacement knobs/speakers/logos for my HD147 amp? A: Line 6 Store Q: Where can I download a HD147 manual? A: Line 6 Manuals
  11. Deutsch Français Q: How do I access the tuner? Spider Tuner FAQs Q: How do I save the Artist/Song presets from the Spider III/IV into the user banks so I can access those presets from my FBV series controller? A: Hold the desired Channel button (A B C D) for two seconds, then use the four-way arrow selector to choose the bank (number) and location (A, B, C or D) where you want to save the preset to. Select the channel button again, and you will see a rapid flash on the channel light to show the preset has been saved. Q: How do I operate the "boost" on the Spider series amplifier? Spider I, II, and III: The Spider Distortion Boost is activated by holding down the “tap tempo” button while rotating the “drive” control above the 12 o'clock position. The B light will illuminate to indicate that the boost is active. Spider IV: The boost feature can be edited by pressing the presets encoder, then using the right/left function on the four-way arrow selector to select “boost”. You can then activate the feature, increase or decrease the amount of boost (up to 8 db), and select “pre” and/or “post”. This can be activated from the FBV Shortboard MK II by the “fucntion 1” button, and the Effect Loop button the FBV Shortboard (Mk I). Q: How do I operate the Noise Gate on the Spider series amplifier? Spider III: Press and hold Tap as you turn the Reverb knob up past twelve o’clock, and you turn on a built-in Noise Gate, which helps to cut down on hiss and noise. When you do this, the Channel D LED comes on to indicate that the Gate is on. Spider IV: The Noise Gate feature can be edited by pressing the “presets” encoder, then using the right/left function on the four-way arrow selector to select “gate”. You can then choose from “Off”, “Gate”, “Noise Reduction”, or “Gate + Noise Reduction”. Use the up/down arrows to select Threshold and Decay, which are adjustable with the Presets encoder. Q: Is there a way to control the amount of effect mix repeats the delay effect makes? Spider I, II, and III: we decided to remove some of the editing capabilities and make it as simple as possible. In addition, we wanted to make it as affordable as possible, and removing some of the edit features was one of the ways that we were able to keep the cost lower. This being the case, you cannot change the delay feedback rate on the Spider. Spider IV: The delay repeats (feedback) can be edited by pressing the presets encoder, turning to “FX3”, the using the up/down arrows to “FdBk”. You can then increase or decrease the amount of feedback by turning the preset encoder, as well as the delay time and mix. Q: Every time I switch to a certain amp model the delay comes on - how can I stop this? Spider I, II, and III: When you select an Amp Model, the Spider automatically sets its tone controls and effects to match that Amp Model. You can disable the auto-FX selection (but not tone control auto-selection), by powering up Spider with the Channel D/Insane button held. Be aware that the auto-selection is re-enabled next time you power up. If you absolutely never want to hear a particular effect (such as delay), you can turn the SmartFX knob to 'Off', then press and hold a channel button until it blinks, and you've saved a new version of the sound, without any effects. Spider IV: The Auto effect feature can be enabled by pressing the presets encoder, then using the right/left function on the four-way arrow selector to select “autoFX”. You can then activate the feature, as well as turn the tap light on/off and set the timer for the display backlight. Q: Why does the tap tempo light always blink? Can I turn the tap tempo light off? Spider I, II, and III 75-150: The tap tempo light shows the tempo of the delay, even if the delay is not active. There is no way to disable the tap tempo light on the Spider I, II, or III Series amplifiers. Spider IV 75-150: The tap tempo light is assignable to the modulation and delay effects, and shows the tempo of the assigned effect. The tap feature can be enabled by pressing the presets encoder, then using the right/left function on the four-way arrow selector to select your effect, then using the up/down arrow to locate “tap”. The tap feature can be enabled or disabled by turning the “presets” encoder, then using the right/left function on the four-way arrow selector to select”setup”. You can then use the up/down arrows to locate “Taplite”, and de-activate the tap light feature by turning the preset encoder. Q: Can I connect my Spider series combo amp (i.e. 15, 30, 75, 120) to an external speaker cabinet? A: No, as there is no external speaker jack to power an external cabinet. The Spider series 150 combo amplifier does have two 8 ohm external speaker outputs that will mute the internal speakers when engaged. See the following link for more cabinet connection information: Line 6 Head and Cabinet Connections Q: How can I record direct the Spider series amp signal directly into a computer? A: You can use the headphone jack as a direct line out to record your Spider series amplifier into any line input on your computer's sound card or audio interface. For sound card connection, you will need a cable with one male stereo 1/4" jack on one end-to plug into the headphone jack of the Spider, and a male 1/8" stereo mini jack-like (the kind on Ipod type headphones) to plug into the sound card. This will work for most computer sound cards, as they often have 1/8" stereo mini inputs and outputs. If you have an audio interface or a professional sound card that have multiple 1/4" inputs, you will need a cable with one male 1/4" TRS (stereo) jack on one end, and two male 1/4" mono jacks on the other end (commonly known as an “insert cable”) to create a stereo image. Take care in setting the output level on your amp: adjust the master volume to get the cleanest and most noise-free sound when the volume control on the toolbar of your computer is on full, with the volume control on your computer speakers set to normal, reasonable listening levels. If you set the output level on your amp too high, the sound will be undesirably distorted. Set it too low and the sound will be noisy. All you need then is some sort of recording software, of which there are many options available. Q: Is there a way to use the POD-Style Out (headphone) jack without disabling the speakers? A: There is no supported way to run both the speakers and the headphone jack at the same time. Q: Can I use an external effects pedal or processor with a Spider series amplifier? A: Effects pedals will almost always work well in front of the Spider series amplifiers. Just be certain that the output level of the external effect is not set too high as it could overload the input of the Spider. Most rack-mount processors are designed for line level use and often don't sound quite right when connected to the front of an amplifier. Q: Can I use a MIDI controller with a Spider amp? A: The Spider series amplifiers do not have MIDI In or Out connections, but the Spider Valve Mark II does have MIDI jacks. We recommend that you use the correct Line 6 controller with your Spider series amplifier. Q: Do any of the Spider Series amplifiers have an effects loop? A: The Spider series (I, II, III, IV) amplifiers are not equipped with an effects loop, but the Spider Valve (I or II) series does have an effect loop. Q: Can I edit/backup my Spider sounds on my computer? A: The Spider IV series amplifier can be edited with the Spider IV Edit Software. The previous Spider series (I, II, III) tone editing must be done on the face of the unit, as there is no computer editor for the earlier Spider series. See the following link for more information on the Spider Edit software: Spider IV Edit (v1.02) FAQs Q: Which controller will work with my Spider series amp? Controller compatibility chart Q: Where can I get replacement knobs/speakers/logos for my Spider amplifier? Line 6 Store Wie kann ich auf den Tuner zugreifen? Spider Tuner FAQs Wie kann ich die Artist/Song Presets auf dem Spider II/IV in eine Bank abspichern, sodass ich es per FBV Controller ansteuern kann? Halten Sie dazu denn Knopf des gewünschten Kanals für 2 Sekunden gedrückt und benutzen Sie dann den 4-Weg Schalter um Bank und Position auszuwählen. Drücken Sie dann den Kanalknopf noch einmal. Das LED des Kanals soltle blinken, wenn dies passiert wurde das Preset gespeichert. Wie funktioniert der Boost auf meinem Spider Verstärker? Spider I, II und III: Halten Sie den Tap/Tempo Knopf gedrückt während Sie den Drive Knopf hinten gegen drehen. Das B Licht wird dann angehen um anzuzeigen, dass Boost eingeschaltet ist. Spider IV: Drücken Sie Presets und benutzen Sie dann die rechts und links Pfeile um Boost auszuwählen. Hier können Sie Boost dann aktivieren, Boost erhöhen oder verringern (bis zu 8db) sowie Pre oder Post auswählen. Diese Funktion kann aktiviert werden vom FBV Shortboard MkII aus. Drücken Sie dazu den Function 1 Knopf. Beim FBV Shortboard MkI müssen Sie den Effect Loop Knopf drücken. Wie bediene ich Noise Gate? Spider III: Halten Sie Tap gedrückt während Sie den Reverb Knopf hinten gegen drehen. Dies schaltet das Nosie Gate ein um Rauschen und Zischen zu unterdrücken. Außerdem schlatet sich das Kanal D Licht ein um Ihnen anzuzeigen, dass Noise Gate eingeschaltet ist. Spider IV: Noise Gate kann auf dem Spider IV bearbeitet werden. Drücken Sie den Presets Knopf und wählen Sie dann mit den rechts links Pfeilen Gate aus. Hier können Sie sich dann zwischen Off, Gate, Noise Reduction oder Gate + Noise Reduction entscheiden. Benutzen Sie dann die rauf runter Pfeile um Threshold oder Decay auszuwählen. Diese beiden Einstellungen können Sie dann auch bearbeiten anhand des Preset Knopfes. Gibt es einen Weg, die Menge des Repeats des Effect Mixes, der vom Delay Effekt erzeugt wird zu kontrollieren? Spider I, II und III: Um die Geräte so eifnach wie möglich zu halten, haben wir verschiedene Bearbeitungseinstellungen entfernt. Sie können leider die Delay Feedback Rate nicht einstellen. Spider IV: Drücken Sie den Preset Knopf. Drehen Sie dann aux FX3 und anhand der rauf runter Pfeile wählen Sie FdBk aus. Hier können Sie die Rate, Zeit des Delays und Mix dann selbst einstellen. Wiese blinkt das Tap Tempo Licht? Kann ich es abschalten? Spider I, II und III: Das Licht zeigt das Tempo des Delays an, auch wenn dieser nicht aktiv ist. Sie können dies leider nicht abschalten. Spider IV 75-150: Das Tap Tempo Licht können Sie manuell der Modulation und dem Delay Effekt zuweisen. Es zeigt dann das Tempo des zugewiesenen Effekts an. Drücken Sie dazu den Presets Knopf, benutzen Sie dann die rechts links Pfeile um Ihren Effekt auszuwählen und dann die rauf runter Pfeile um Tap zu finden. Tap kann hier mit dem Presets Knopf an oder ausgeschaltet werden und per rechts links Pfeile können Sie dann Setup auswählen. Benutzen Sie denn die rauf runter Pfeile um Taplite zu finden. Mit dem Preset Knopf können Sie jetzt das Licht an oder ausschalten. Kann ich mein Spider Combo an eine externe Box anschließen? Nein, es sind keine Ausgangsjacks vorhanden, um Boxen anzuschließen. Das Spider 150 Combo hat zwei 8 Ohm Ausgänge, die die internen Lautsprecher stumm stellen, wenn angeschlossen. Line 6 Head and Cabinet Connections Wie kann ich das Ausgangssignal meines Verstärkers direkt in den Computer spielen? Sie können den Kopfhörerausgang als Line Out benutzen und an einen Stereo In Ihres Computers anschliessen, wie z.B. eine Soundkarte oder eine Audio Schnittstelle. Für die meisten Soundkarten brauchen Sie ein Kabel mit ¼“ männlich für an den Verstärker zu 1/8“ männlichen für an den Computer. Dies wird für die meisten Computer funktionieren, da der größte Teil der Soundkarten einen 1/8“ Eingang haben. Wenn Sie eine Audio Schnittstelle oder eine professionelle Soudkarte haben, die mehrere ¼“ Eingänge haben, dann brauchen Sie ein 1/4“ x2 mono zu ¼“ x1 stereo um Stereo Audio zu erhalten. Achten Sieaber bitte auf das Ausgangslevel des Verstärkers, Sie können so den Master Volume einstellen denn wenn dieser zu hoch eingestellt ist, dann wird der Sound verzerrt und wenn er zu niedrig ist, dann wird der Sound rauschen. Zu guter Letzt brauchen Sie dann noch eine Aufnahmesoftware. Kann ich den Kopfhörerausgang auch benutzen ohne die Lautsprecher abzuschalten? Nein, beides kann nicht gleichzeitig laufen. Kann ich ein externes Effekt Pedal oder einen Przessor benutzen? Effekt Pedale werden fast immer funktionieren, achten Sie einfach auf den Ausgang des Pedals, da dieser den Verstärker überladen kann. Die meisten Rack Prozessoren sind für Line Level entworfen und hören sich daher nicht richtig an, wenn man sie an den Verstärker anschließt. Kann ich einen MIDI Controller mit dem Spider Verstärker benutzen? Die Spider Verstärker haben weder MIDI Ein- noch Ausgang. Der Spider Valve Mark II jedoch hat einen. Wir empfehlen die Nutzung eines Line 6 Pedals. Haben die Spider Verstärker einen Effects Loop? Nein, nur die Spide Valve MkI sowie MkII haben einen. Kann ich Sounds, die auf meinem Spider sind auf meinem Computer abspeichern oder bearbeiten? Den Spider IV Verstärker können Sie anhand der Spider IV Edit Software bearbeitet werden. Bei allen anderen Spider wird die Tonbearbeitung direkt vorne am Verstärker durchgeführt, da diese keine Edit Software haben. Weitere Informationen: Spider IV Edit (v1.02) FAQs Welcher Controller funktioniert mit dem Spider Verstärker? Controller Kompatibilität Wo kann ich Ersatzteile für den Verstärker kaufen? Line 6 Store Comment puis-je accéder le Tuner? Spider Tuner FAQs Comment est-ce qu’on enregistre les presets Artist/Song sur le Spider II et IV dans une banque pour l’accéder avec un contrôleur FBV? Maintenez enfoncé le bouton du canal désiré pour deux secondes. Sélectez banque et position avec le contrôleur à quatre voies. Tapez le bouton du canal encore une fois et si la lumière du canal clignote, le preset a été enregistré. Comment fonctionne Boost sur mon ampli Spider ? Spider I, II et III : Maintenez enfoncé le bouton Top/Tempo et tournez Drive au maximum, si la lumière B s’allume, Boost est active. Spider IV : Poussez l’encodeur Presets et utilisez les flèches gauche et droite pour sélecter Boost. Maintenant vous pouvez activer Boost, augmenter et diminuer la quantité du Boost (jusqu’à 8db) et sélecter Pre et Post. Boost peut être activé avec le bouton Function 1 sur le FBV Shortboard MkII et avec le bouton Effects Loop pour le FBV Shortboard MkI. Comment est-ce que Noise Gate fonctionne ? Spider III : Maintenez enfoncé Tap et tournez Reverb au maximum. Cet allumera le Noise Gate. Si vous faites ça, le LED du canal D s’allume. Spider IV : Tapez l’encodeur Presets et utilisez les flèches gauche et droite pour sélecter Gate. Maintenant, vous pouvez choisir Off, Gate, Noise Reduction ou Gate + Noise Reduction. Utilisez les flèches haut et bas pour sélecter Threshold et Decay que vous pouvez ajuster avec l’encodeur Presets. Y a-t-il la possibilité de contrôler des répétitions de l’Effect Mix qui sont produits par l’effet Delay ? Spider I, II et III : Nous avons essayé de garder ces modèles aussi simple que possible. Ce n’est pas possible de changer cette fréquence. Spider IV : Poussez l’encodeur Presets, choisissez FX3 et utilisez les flèches pour choisir FdBk. Ici vous pouvez augmenter et diminuer cette fréquence en tournant le bouton Preset. Le delay se lance automatiquement si j’utilise un preset spécifique, comme puis-je arrêter ca ? Spider I, II et III : Vous pouvez désactiver auto-FX en allumant le Spider et maintenant enfoncé canal D/Insane en même temps. Si vous rallumez l’appareil, auto-FX ce lance aussi. Si vous voulez désactiver cette fonction en permanence, vous pouvez éteindre le bouton SmartFX et maintenir le bouton d’un canal jusqu’à ce qu’il clignote. Spider IV : Poussez Presets et utilisez les flèches gauche/droite pour choisir autoFX. Pourquoi est-ce que la lumière Tap Tempo clignote toujours ? Spider I, II et III 75-150 : Cette lumière vous montre la vitesse du delay même s’il n’est pas active. Vous ne pouvez pas le désactiver. Spider IV 75-150 : Vous pouvez assigner cette lumière aux effets. Elle montre la vitesse de l’effet. Poussez Presets et choisissez votre effet. Et trouvez Tap. Vous pouvez désactiver et activer Top ici avec l’encodeur Preset. Utilisez les flèches gauche/droite pour choisir Setup. Maintenant vous pouvez aussi chercher pour Taplite et désactiver la lumière en tournant l’encodeur Preset. Puis-je connecter mon ampli Spider combo (15, 30, 75, 120) à un baffle externe ? Non, parce qu’il y en a aucun jack pour un baffle externe. La combo Spider 150 a deux sorties pour un haut-parleur externe avec 8 ohms. Cette option assourdie les haut-parleurs intégrés. Line 6 Head and Cabinet Connections Comment puis-je enregistrer le signal de l’ampli Spider directement dans mon ordinateur? Vous pouvez utiliser le jack de casques comme Line Out pour enregistrer votre ampli Spider dans n’importe quelle entrée Line de votre ordinateur pour une connexion, vous avez besoin d’un câble 1/4’’ mâle stéréo à jack 1/8’’ mâle stéréo pour connecter à la carte son du ordinateur. Ça fonctionne avec la plupart des cartes sons parce qu’une plupart de ces cartes ont une entrée 1/8’’. Si vous avez une interface audio ou carte son professionnelle avec plusieurs entrée 1/4", vous avez besoin d’un câble 1/4" stéréo à 2x 1/4’’ mono pour recevoir du audio stéréo. Faites attention au niveau de sortie de l’ampli pour recevoir du audio propre et sans bruit. Si vous mettez le niveau de sortie de l’ampli trop fort, le son sera déformé. Mettez le niveau trop faible et le son sera bruyant. La dernière chose que vous avez besoin est un logiciel d’enregistrement audio pour l’ordinateur. Y a-t-il la possibilité d’utiliser une sortie jack sans désactiver les haut-parleurs ? Malheureusement pas. Puis-je utiliser un pédale effet ou processeur externe avec l’ampli Spider ? Les pédales effets fonctionneront presque toujours bien avec les amplis Spider mais ne mettez le niveau de pédale trop fort pour ne pas surcharger l’entrée de l’ampli. Les processeurs en rack souvent ne sonnent pas bien dans un ampli. Puis-je utiliser un contrôleur MIDI avec un ampli Spider ? Les amplis Spider n’ont aucune connexion MIDI. Seulement le Spider Valve Mark II a des connecteurs MIDI. Nous recommandons d’utiliser le contrôleur correct de Line 6 avec les amplis Spider. Ont-ils on Effects Loop ? Non, les amplis Spider I, II, III et IV n’ont pas de Effects Loop mais les amplis Spider Valve ont un Loop. Puis-je éditer ou sauvegarder mes sons sur mon ordinateur ? Vous pouvez faire tous ca sur le Spider IV avec le logiciel Spider IV Edit. Vous devez éditer les sons des autres amplis directement sur l’ampli. Spider IV Edit (v1.02) FAQs Quels contrôleurs fonctionnent avec mon Spider? Compatibilité avec des contrôleurs Ou puis-je acheter des remplacements ? Line 6 Store
×