Search the Community
Showing results for tags 'eq tips'.
Found 3 results
-
Hi all! About a year ago, I was using an MXR 10-band EQ in the FX loop of my amplifier and it sounded amazingly good. I noticed it was giving me some bad hiss though, so I switched it out for a Source Audio EQ2 about 6 months ago, which also sounded good. I wanted to add delay, reverb, and an amp modeler into the amp's FX loop along with the EQ, so I ultimately decided to sell the EQ2 and put an HX Stomp in the amp's FX loop to do all of this. Currently, this is how my HX Stomp functions and here is my signal chain: Guitar > front of amp effects > preamp > FX loop send > HX Stomp 10 band EQ > HX Stomp digital delay > FX loop return > power amp The problem is that upon switching out the EQ2 for the HX Stomp, when I set the Stomp's 10-band EQ parameters to what the previous EQ's were set at, I realized there was an extremely noticeable jump in some of the frequencies. The signal immediately sounded very nasally. Through messing with the frequencies, I realized there was a boost in frequency right around 1K Hz. To give an idea of how different the frequency hike is, 1K Hz on the old EQ was set at +2 dB (I run a little hotter for more gain in the FX loop). On the HX Stomp, I have to run this same frequency at -2.0 dB to achieve a comparable sound. However, running this frequency this low on the Stomp's EQ is causing some fidelity issues; coming out of speaker, anything around 1K Hz sounds like it coming out of an AM radio. You can imagine this is frustrating. Has anyone had this issue and/or does anyone have any thoughts, suggestions, or advice on how to fix this? Thanks in advance.
-
Looking for some EQ tips for my Strat to stand out in the mix. I play on my church’s worship team and find that my tone coming through the PA and through online streams sounds really dark and thin at times. How can I clean this up and make it really stand out in the mix? Ideally it sounds more “full” and is able to be clearly heard. I’m using compressors and hi/low cuts on the amps and cabs when necessary. Appreciate the advice!
