Search the Community
Showing results for tags 'error'.
-
In some cases, you may get an error when attempting to run Line 6 Updater for Windows saying "Open GL 2.0 not supported" This is due to an incompatibility with the graphics protocol in the Updater and your graphics card. You'll need to update your graphics card to the latest drivers from their manufacturer that support Open GL 2.0 In more rare cases, some graphics cards cannot be updated to be compatible due to their age and another computer must be used.
-
I own a JTV69US. I love this guitar but this monkey-business is ridiculous. I have version 1.82b. Using the supplied cable and tried a standard CAT5 cable. My guitar is plugged in. My volume is turned up. I'm USB plugged into the back of my Mac, not a hub or keyboard. Everytime I try to upgrade or rollback the flash I get the error message ... "Update Failed. (Code 80009000) Unknown MIDI Error. Make sure the cables are connected and try the update again." I've tried it 3 or 4 hundred times. Same error message. I own a 600 and 700 and have connected them many times (though there are usually some issues.) I've never been able to connect my JTV. HELP! -
Hi, I am with a company designing a custom midi controller that we wanted to have work with the M9. We are using Arduino to implement the controller. I have the looper doing play/stop and record via midi, all of which work great. When I tried to implement overdubbing, the M9 does not respond. I am sending a midi control change message with controller number 50 and a value of 0 on channel 1. I have tested this by sending the midi message to Abelton, which recieves it correctly and verifies this is what is being sent. I have also tried implementing it via Arduino's midi library and via their serial.write sending the message manually. I checked the midi input in setup as well, and have tried it both as channel 1 and omni. Another weird thing is that when the M9 is in record mode and receives this message it goes into playing while overdubbing, but once the M9 is playing the message does nothing. Really unsure what is wrong here unless our M9 is just defective, I have exhausted every other factor of error I can think of. I am going off the midi controls listed in the manual here: http://line6.com/data/6/0a060b316ac34f0593fca717b/application/pdf/M9%20Advanced%20Guide%20-%20English%20(%20Rev%20A%20).pdf We are on a deadline to have this working so any help is very much appreciated. Thanks!
-
I've recently got problems with a clicking noise when I use my POD HD500X. At first I suspected my guitar, so I made sure everything was tightened properly. It didn't help, and I also noticed that I get this noise from all of my other instruments. It doesn't matter if I use the mono outputs, headphones or use the POD as audio interface. I've tried to reinstall all software with Line6 Monkey, and the problems remain. Here's a video describing my problems: I'd appreciate all kinds of suggestions for solving this :)
-
Hello. I am sure I have read about some real bugs of HD Edit in the past, so we should take the time and ask Line6 to fix them. This thread should be used as a collection to provide all needed changes in one list. So, at the end we should have a list of errors to be fixt and (additional) also some realistic (!) wishes (probably never will be fulfilled). First error I remember was something with mixer volume, which would not be saved in some instances (maybe only if the POD is connected via USB?). Maybe someone can specify this error more detailed? My personal biggest (realistic) wish for an update of HD Edit would be a tab-functionality to jump to the next knob or parameter and a much more straight visualisation of the chosen (or mouse-over) effect. So here is the list (I would like to keep updated) Bugs take a look at the system defaults and set them to the most common and flawless values. get rid of "(Code 8000000a) Operation timed out". add the software-ability to fix the hardware knobs, as those seem to move by themself through vibrations. expression-pedal related multi-platform bug crashes Edit, if you extensively use wah for more than a couple of minutes (Details 1, 2, 3). DEP lack of displayed knob-values (missing value-display is a known bug. Feature introduced with Ver. 2.25). Error when saving mixer volume (only HD is connected via USB) >>> ideascale I can recall encountering a bug where one side of the mixer, the right channel, occasionally went silent for some reason, and the solution was to just move the volume slider, if using HD Edit. strange general behaviors when HD is connected via USB (should be explainded more detailed). f.e. changes in FX and Amps that are performed over footswitch or expression pedal are not instantly updated/visible (some times not at all) on the edit software. There is no way to know if changes (for example, volume) are actually taking place. Communication between the software and the unit must be improved. I found after editing multiple patches and then quitting the POD HD 500 EDIT you have to restart your pedal to reread the newly edited/loaded patches or they won't play right. the delay settings are not properly transferred from the editor to the device afaik there might be some unfixed issues with some amps in the model packs. Wishes tab-functionality to jump to the next knob or parameter add an overload Indicator in the HD500 signal chain add a vertical scrollbar to allow native resolution of netbooks much more straight visualisation of the chosen (or mouse-over) effect I want to be able to see value of knobs before turning any. Its hard to tell EXACTLY what % your knob is on. The dot that represents true button placement does not get you close enough. I want to edit by the numbers not a grainy LCD screen. Often I need to edit just a couple numbers. add some more mic angles for the SM57 and some valuable mics add some kind of Global EQ patch-wise as an effect-block or DEP Dual Output Modes add API-functions or let the HD Edit go Open Source
-
I BOUGHT SECOND HAND POD HD 500, THEN I WAS ABOUT TO RESET EVERYTHING, SO I REGISTERED S/N AND MADE MY ACCOUNT, DOWNLOAD MONKEY, DRIVER, MANAGER FILES FROM THE PAGE ACCORDINGLY, BUT THE PROBLEM IS HERE, LET ME ADD SOME PICTURES
-
When I'm trying to calibrate the pedal, the value are 23-255 and not 0-255. What am I doing wrong...?
-
My Helix is not recognized by my computer most of the time. I've installed the driver, and after doing a factory reset, turning it on and off, I can eventually get Line 6 Updated to see the Helix. However, when I try to install updates I'm getting errors (I have a help desk ticket in, too...but my experience with that has not been great in the past). So, now I have no presets and can't install the updates to the firmware, and can't connect at all to the Helix edit app. Does anyone have any ideas? Thanks, Joe
-
So bought a GX Pod (Off E-Bay) after I had already upgraded the day before. Besides the fact the Line 6 Monkey will not let me register I also get this error message in Audacity, Reaper and the included software or a variation: Error while opening sound device. Please check the input device settings and the project sample rate. So any ideas on what I can do? The Line 6 does show up in the input/output, but every time I try and hit record the above shows up.... Love the tones etc but if I cannot record what's the point? Any help would be appreciated.
-
Hi I purchased the vintage amp pack a couple of weeks ago. Due to a busy Schedule I hav just now gotten around to installing this. I followed all the instructions. Updated drivers and software with the Monkey. (I can see the clobal eq) with License manager I authorized my computer. I can now see the Vintage amp pack in the License manager. I then Authorized my HD500x And clicked INSTALL. The dialog box "recycle power...." appears. BUT no Vintage Amp pack to be seen either in the Licensemanager or on the HD500x itself - (Standard model set - under Amp pack) I tried to unauthorize my HD500x and authorize Again - no success Please advice - Thanks Kind regards Bendt Aaen
-
i cant update usb firmware, and i cant authorize my pod hd 500x help me please (i just purchase a metal hd pack and i dont wanna feel i waste 60 $ T-T)
-
Hey there, my band have a stage 2 days later; but i am having trouble with stagescape m20d . I cannot open it. When I push to open it says on black ''Line 6'' backgrounded screen: ''App returned with status 127'' I don't know what to do. It happened for nothing. I didn't remember I did something wrong, what should I do now? any suggestions? please help me about it. Thank you so much. Hakan.
-
Hi, I'm having problems when saving a tone from My Tones to hardware (amplifi fx100). I go to my tones tab, select one tone so it's colored in red (selected), then when I choose save to hardware it throws an error message "please try again later. Your presets are currently downloading from Amplifi" Any idea of what's going on?? If someone had this issue and solved it please help. Cheers, Mike
-
my pod x3 live when connected usb generates noises clips and pops I updated the driver, changed the usb cable, I connected to another PC in order and I have not been able to find a solution mi pod x 3 live cuando esta conectado usb genera ruidos como clips y pops he actualizado los driver ,cambiado el cable usb ,lo he conectado a otro pc en fin y no he podido encontrar una solución
-
"Error saving download file Reason(code 8000600B) Incompatible systems" What to do? -
Hi everyone, I wondered if anyone else has encountered this issue the bass podxt pro. I am currently using it as a digital effects unit in logic pro 9, via my spdif in and out on my focusrite pro 14 interface. Essentially when you use the external insert effect plug in when you send the bass pod a stereo or mono signal, it returns it in stereo with the left channel effected by the bass pod, and the right channel without. Is this supposed to happen? However, when I plug the bass pod via usb, and still use the focusrite as the audio interface, it returns the stereo send, this time as a mono return. None of this is mentioned in the manual (obviously), and havent found any other posts on the forum about it. What you have encountered? Is this supposed to happen? And is there a way to fix this, other than within logic (which is a pain in the back-side)? I need my usb port free for hard drives! Thanks for reading, Matt -
Hello. For 3 months, every time that I save a patch the Pod X3 Live saves it in the D slot. It doesn't matter if I'm in the 24A or 22B or 13C, etc, it saves the current patch and overwrites the respective D slot at the same time. I try to update the flash memory, firmware and every looks ok in the Line 6 Monkey, but the problem is still happening. Any suggestions? PS: Sorry for the english
-
Hey guys, kinda at my wits end with this truthfully. I understand that there's been some Windows 8/Pod HD compatibility issues, so I'm trying to get to the bottom of this. Plug in my HD Pro via USB. Reaper volume reads about 50% no matter where the volume knob falls, even though the POD wasn't selected as the MIDI output for the track. Therein lies the problem, I can't seem to get it so the POD is available as an output at all. Updating the POD's flash memory to the current version (2.31) seems to be causing some intermittent BSOD errors. Either the thing is bricked until Line 6 rolls out new drivers/flash/whatever is making this such an issue, or there's some kind of fix to be had. I imagine the fact that it doesn't show up might have something to do with everything not being completely up to date? I did roll the flash back to try that, still no luck. Sorry if this seems a little disjointed, just trying to document my troubleshooting process. Has anyone here had similar issues?
-
Hi: I updated "Pod Farm2" to version 2.57, but now I can´t use the "Gear Box" because when I start the applicatión I get window message error . Attached some files. Any solution?. Greeting. Thanks
-
Hello, I recently bought a FBV Shortboard MKII to go with my Spider IV 120. I've connected up to my laptop using the correct cables with the intention of updating the firmware and using Spider Online. However, I downloaded Monkey and tried to update the Flash Memory update for the amp. Every single time I try, I get the following message. "Spider IV 120 update failed. (Code 8000000A) An undefined error occurred. Try the update again making sure the cables are still connected." Now I can't use the amp at all, as it's stuck on a menu saying "Ready to Update." :unsure: I also cannot seem to factory reset the amp at all. I really don't know what to do. PLEASE help anyone?! :(
-
Last weekend, I connected my HD400 to my laptop for the first time in a VERY long time. Line 6 Monkey told me there were updates. So, I figured why the hell not. So, I told them to run. While the update was being performed, Line 6 Monkey popped up an error message saying it had encountered an error and would be shutting down. When the update started, it said that the FULL update should be run uninterrupted so I left the HD400 sit with it saying DOWNLOADING.... for a couple hours. I came back and it was still like that so I assumed that things got messed up and I'd have to start over so I powered it down. Only thing is, now it won't power back up properly. I get a message that says DSP BOOT ERROR then NOTHING!!! I've tried resetting to factory settings. I've tried using different cables, USB ports etc and nothing. Please help. Can someone tell me where to go from here to fix my HD400?
-
I tried to update to firmware v2.0 using Monkey. The update threw the following error: Tyler Variax update failed. (Code 80009000) Unknown MIDI Error After pulling and replacing the 1/4 connector on the guitar to reboot it and restarting Monkey, it showed that the firmware was at 2.0 -- but ALL OF THE MODELS ARE GONE, GONE, GONE... I tried rolling back to v1.71 but it ALSO terminated with the same error message, same result - NO MODELS and it also SAYS it's back at v1.3, NOT 1.71 as when it was delivered! THIS IS NOT ACCEPTABLE BEHAVIOR!!! PLEASE PROVIDE A FIX IMMEDIATELY OR THIS GUITAR WILL BE RETURNED!!!! I also logged this problem this morning as: "Download From Guitar Clobbering Workbench Hd Settings" -
Hello! I'm having troubles with the 500X Edit after updating my POD flash Before I updated the flash I created a Back up of all my presets When I updated the Flash I clicked don't save any presets so I have a clean install Now I'm trying to load my presets and this is what I get (screen cap) Is anyone else having this problem???
-
Hi, I just bought a KB37. And I'm happy. But I try for 3 days to go in control panel. In vain. The message is "Error starting TonePort KB37 Control Panel Applet. I am on Macbook pro, 10.6.8. I downloaded all the updates via line6 monkey. Everything seems alright. But the control panel is un findable. Is someone able to help me ? Thank you. Nyssen
-
Just as the title says, I'm running into this problem. When I connect my x3 Live via usb, my pc prompts that it doesn't recognize the x3. I've downloaded the latest Line6 Monkey.
