Search the Community
Showing results for tags 'exp1'.
Found 9 results
-
I’ve had both an hx stomp, and now a stomp xl, and my expression pedal is not working for swells. I plugged it into the expression 1/2 on the stomp, and then added a volume block to my patch. I tried putting my volume block at the beginning of my signal chain, after my amp, and at the very end. I also tried messing with the global settings. My issue is that it works for turning up and down my volume, but even though it’s before my reverb and delays, it shuts off the echoes and delays when I roll it back. I want the echoes and delay to continue decaying after I turn down my volume. Instead, it starts turning off my reverb and delay instantly as soon as I begin to roll back on my volume pedal. And this keeps happening regardless of where I put the volume block in my signal chain. I also turned up my decay time on my reverb block as far as it will go, and my volume block is still shutting off the decay. What do I need to do to get the volume block to work for swells?
-
Hello all, Wanted to see if you all could help me with this...so I typically use my stomp with just one expression pedal with a TRS Cable, and all works great. I attempted today to use a second EXP in conjunction with the first one, using a Y-split cable (tip & sleeve into one exp pedal, and ring & sleeve into the other). To my surprise, this didn't work the way I expected. Using either exp pedal going one full sweep starting from heel to then toe position, the stomp reads 0% to 100% only halfway through the sweep, then goes back down to 0%...at the toe position..?! So for one motion of my foot from heel to toe, the stomp goes 0% to 100% to 0%. I am baffled to say the least and I have tried changing every settings for EXP in the Global Settings but he has yet worked. If you guys have had experience with this issue, please let me know. Thanks
-
Hi team I experienced this when first building my Helix system, and an afternoon with a multimeter, cable ends and a soldering iron had me sorted. I do see this pop up from time to time, and figured I would document my findings/actions for others to understand what's going on when this 0-100-0 sweep happens. Walkthrough doc with photos attached. It might not be 100% correct, but it's what worked for me :) Helix EXP TRS-TS Cable.pdf
-
- 1
-
-
- expression
- external
- (and 2 more)
-
Please help, I have a Helix LT and bent the built-in pedal. I purchased the Mission Engineering EP1-L6 and saw on another post that instructs to plug into the EXP1 port. I don't have a EXP1 port! When I plug in and use the pedal, its only functioning as a volume pedal. I went into HX Edit and right clicked the "position" where I can select EXP Pedal 1 and EXP Pedal 2. Pedal 2 shows Volume, I can see EXP Pedal 1 shows (Pitch wham: Position) EXP Pedal 2 now shows (Multiple 2) but when I adjust the pedal it's still a volume pedal. I am able to get Wah with EXP Pedal 2, but it seems to be a combo of Volume and Wah. Heel position is zero volume The Volume isn't selected. Screen shot attached. I don't see an easy way to make the pedal operate as the pedal 2 Wah. Please help! Thanks in advance. Ron
-
Not long ago I started using the MidiCC59 applied to a foot switch on the control centre to switch between EXP1 and EXP2. This has suddenly stopped doing what I expect it to do, and I can't seem to get into EXP2 either with MidiCC switching or the toe switch........it's bending my brain! If it helps, i use this because my wah block is set to bypass on EXP1 at 5%, in other words, as a switchless wah. However, I want to also use EXP2 as a min/max speed controller for my Rotary block. I was using MidiCC59 and a short Midi cable from out to in with thru off to enable this Midi switching approach and remove the need for toe switch to be used. It HAD been working perfectly, but now not.........any experts out there??
-
I've looked around for an answer but have yet to find one, so here goes... I've supplemented my HX Stomp with a Mission SP1-L6H, but I also have a single external switch; I'd like to use them so the HX Stomp's 3 switches can access Snapshots, the EXP1 can be set to the SP1-L6H and the small switch can be set as Tuner/Tap Tempo. So far, everything works with one exception: The expression pedal's toggle switch doesn't work. So when I want to use the Wah, for example, I need to stomp a switch to engage a snapshot where the Way block is "on" and THEN start rocking the expression pedal. My question is this: Is it not possible to have the expression pedal toggle the wah (or whammy, etc.) with its switch like a regular wah pedal? If it is, how do I set this up? Thanks! Chris
-
Hi again guys, I have a question: Got my ‘baby’ board set up for vocal and guitar with the Stomp at its heart for the guitar FX (photo). As mentioned in a previous topic, I have FS4 & 5 acting as Page < and Page > (the two-button switcher under the Stomp). Everything is working fine. I have a dedicated Wah effect working separately from the Stomp. Question is about whether there’s a way to utilise FS4/5 when needed AND Exp1 (to access wahs, whammys, etc). Previously, Phil_M helpfully suggested a DMC MIDI pedal through which Exp1 could be accessed. I could go down that route if necessary. My question is - could a simple, bespoke, single button A/B switcher with TRS output allow switching between the stereo signal from FS4/5 and a mono (tip) signal from an expression pedal for Exp1 function? Cheers, Andy
-
I just got the helix a few days ago and i love it but a few things is bothering me. If EXP1 is the expression on the board why doesn't it work? it only work as EXP1 when something is plunged in the second EXP. ill assign a Wah to EXP1 for the position movement and nothing will happen, so ill assign to EXP2 then i will get movement. when a cable is plugged in EXP2 the board expression pedal will work as EXP1. i hope I'm making sense cause I'm getting annoyed with the thing. -
I just bought a Helix, and have been playing with presets and even created my first custom preset. For the life of me, I can't figure out how to switch the expression pedal between EXP1 and EXP2, which are set up for volume and wah respectively on some presets. All I can get from it is volume control, but can't switch to wash mode. I have seen mention in the manual of a hidden toe switch, but I can't figure out how that works. Hints? Clues? 6stringnazi
