Search the Community

First, connect the FBV via USB to the computer and use the FBV Control software. In the File>Open menu, select the ‘Gearbox’ preset for the FBV. This will store on the FBV automatically. Close FBV Control. Then, start Gearbox with the FBV still connected to the computer. Go to the Edit>Preferences window, and in the ‘MIDI/Control’ tab, select USB Audio Device for MIDI Input. Hit Apply and then, OK. The FBV will now control certain parameters of the program including Wah/Volume sweep and toggling. If you would like to change the behavior of the switches, you should than exit Gearbox and go back to FBV Control once again to assign MIDI CC Toggle messages that correspond with what they want to control in the program. You can reference the chart for Gearbox MIDI CC messages starting on page 2.14 of the following Gearbox MIDI CC Reference Guide: http://line6.com/data/6/0a060b316ac34f0593546810e/application/pdf/MIDI%20Continuous%20Controller%20Reference%20-%20English%20(%20Rev%20F%20).pdf

The main features of the Spider III amplifier can be controlled by connecting an FBV Shortboard MKII. Q: What type of cables are used with the Line 6 FBV Shortboard MKII? A: The Line 6 FBV Shortboard MKII uses a standard CAT-5/6 cable with standard RJ-45 ends. These cables are very common in data connection and can be found in most local computer outlets. The FBV controllers ship with a black 25' cable included in the box. Please see the chart below that details what each switch controls on the Spider III amplifier.

Q: I'm on a Windows PC. Why does Line 6 FBV Control or POD HD Edit (300/400/500) programs "hang" at the logo screen and never go past this startup splash image? A: Users who have "virtual MIDI Cable" software (a known example is: Hurchalla Maple) installed on their systems may experience a stalled state where the FBV Control or POD HD Edit program logo appears onscreen and the program remains "stuck" trying to load. Please uninstall your virtual MIDI Cable software application and then try re-launching the FBV Control or POD HD Edit program. If you need to have a virtual MIDI Cable program running on your system, please consider using LoopBe1: http://www.nerds.de/data/setuploopbe1.exe or Bome's MIDI Translator Pro: http://www.bome.com/products/miditranslator

This document explains how to update the flash memory of the Spider Valve Mk II using the FBV Mk II and Line 6 Monkey on Windows XP, Vista, 7 and Mac OSX 10.4.11, 10.5.8 and 10.6.x. Before you get started, you will need to have your Spider Valve Mk II connected to the FBV Mk II (Express or Shortboard) using a CAT-5 cable, and you will need to have your FBV Mk II unit connected to an open USB port on the back of your computer (do not use a USB hub). Be sure that your computer is connected to the internet. 1) Run Line 6 Monkey and you will be asked which unit you want to work with. Highlight the Spider Valve Mk II unit and select 'OK'. 2) Highlight 'flash memory' (it will turn blue), then select 'update selection'. 3) Select 'Yes' to continue. 4) Select "I Accept" for the software agreement and select 'continue'. 5) Select 'Yes' to update the Flash memory. Do not run any other programs or disconnect the cables while performing the update. 6) Allow the unit to go through the update process. This can take 5-10 minutes. 7) Select 'OK' when the update is finished. 8) You will see a green check mark in front of flash memory to show it is now up to date. Note: If you are having difficulty getting the Spider Valve Mk II to update, you can start the amp in "boot mode" by powering the unit up while holding the "Manual" and "B" buttons.

This document explains how to update your FBV Mk II (Express or Shortboard) controller using Line 6 Monkey. You will need to connect your FBV Mk II controller using a USB cable to your computer, then run the Line 6 Monkey application. If your software is out of date (or you want to reflash for trouble shooting purposes), you will want to update using the following directions. Line 6 Monkey Installation and F.A.Q. USB Connectivity with Line 6 Devices 1) If Monkey asks you to register your gear, you can select 'remind me later'. 2) Select the "flash memory" to highlight (in blue), then select "update selection". 3) Select "I Accept" for the software agreement and select 'continue'. 4) Decide if you want to restore the factory defaults, then select your choice (if you are reloading software for trouble shooting, select "yes"). 5) Select "yes" to continue to the update. 6) wait for the flash memory to update and be installed, then select "OK". 7)Your unit should now be successfully updated.

Deutsch Français This document explains how to update the Spider IV (75, 120, 150, 150HD) using the FBV Mk II and Line 6 Monkey using Windows XP, Vista, 7, and Mac OSX 10.4.11, 10.5.8, and 10.6.x. Before you get started, you will need to have your Spider IV connected to the FBV Mk II (Express or Shortboard) using a CAT-5 cable, and you will need to have your FBV Mk II unit connected to an open USB port on the back of your computer (do not use a USB hub). Be sure that your computer is connected to the internet. Here is a video that shows you how to update your Spider: Close out any other applications running on your computer before updating the amp. This update has been successfully performed many times by our users. If you experience connection/timeout issues: Try another USB cable. Ensure that the pedal is NOT connected to the computer through a USB hub. Avoid plugging into USB ports found on keyboards, monitors, or laptop docks. Make sure to connect the interface into a USB port directly into the computer, especially into the back of a desktop. If problems persist, make sure to try to get a connection on all of the USB ports on your computer. If you continue to not get a good connection, you should try the update on another computer, as the first one may have a configuration issue. It is best to also try on a different network in the event your network's configuration is causing the connection issues. Satellite internet, dial-up connections and tethering to a phone are not supported by Line 6. Line 6 Monkey Instructions: 1) Run Line 6 Monkey and you will be asked which unit you want to work with. Highlight the Spider IV unit and select ‘OK’. 2) If Monkey asks you to register your gear, you can select ‘remind me later’. 3) Highlight ‘flash memory’, then select ‘update selection’. 4) If Monkey asks you to register your gear, you can select ‘remind me later’. 5) Select ‘Yes’ to continue. 6) Select "I Accept" for the software agreement and select ‘continue’. 7) Select ‘Yes’ to update the Flash memory. 8) Allow the unit to go through the update process. This can take up to 5 minutes. 9) Select ‘OK’ when the update is finished. 10) You will see a green check mark in from of flash memory to show it is now up to date. Das Aktualisierungsverfahren des Spider IV (75, 120, 150, 150HD) anhand eines FBV MkII via Monkey Software wird in diesem Dokument erläutert, für Windows XP, Vista, 7 sowie Mac OSX 10.4.11, 10.5.8 und 10.6.x. Bevor Sie aber loslegen müssen Sie erst das FBV MkII (Shortboard oder Express) via USB an den Computer und mit CAT-5 (RJ45) Kabel an den Spider IV anschließen. Stellen Sie außerdem sicher, dass der Computer eine Internetverbindung hat. Wie aktualisiere ich mein Spider IV: Video. (nur in englisch verfügbar) Schließen Sie alle anderen Programme auf Ihrem Computer bevor Sie das Update starten. Sollten Sie Probleme bei der Aktualisierung haben dann: Versuchen Sie ein anderes USB Kabel, Schließen Sie das Pedal auf keinen Fall über einen USB Hub an. Stecken Sie das Gerät immer direkt hinten in den Computer. Testen Sie es mit allen USB Ports, die zur Verfügung stehen. Wenn Sie immernoch Probleme haben, versuchen Sie das Update auf einem anderen Computer durchzuführen denn es kann auch an der Konfiguration des Computers liegen. Sie können zudem noch ein anderes Netzwerk austesten, denn eventuell hat Monkey Verbindungsprobleme. Anweisungen zum Update: Starten Sie Line 6 Monkey und es sollte Sie auswählen lassen, mit welchem Gerät Sie arbeiten wollen. Markieren Sie den Spider IV und klicken Sie dann auf ‘žOK’. Wenn Monkey Sie fragt, ob Sie das Gerät registrieren wollen, dann können Sie auch ‘žRemind me later’ anklicken. Markieren Sie ‘žFlash Memory’ und klicken Sie dann auf ‘žUpdate Selection’. Wenn Monkey Sie fragt, ob Sie das Gerät registrieren wollen, dann können Sie auch ‘žRemind me later’ anklicken. Klicken Sie ‘žYes’ um fortzufahren. Klicken Sie ‘žI Accept’ und dann ‘žContinue’. Klicken Sie ‘žYes’ um Flash Memory zu aktualisieren, dies kann einige Minuten dauern. Drücken Sie ‘žOK’ sobald das Update fertig ist. Vor dem Flash Memory sollten Sie nun ein grünes Häkchen sehen, welches angibt, dass das Update vollständig ist. Ce document explique comment vous pouvez mettre le Spider IV (75, 120,150 et 150HD) à jour en utilisant un Shortboard/Express MkII sur un ordinateur Microsoft et Mac OSX 10.4.11, 10.5.8 et 10.6.X. Connectez votre FBV MkII au Spider IV. Connectez le FBV MkII avec un câble USB à votre ordinateur, n’™utilisez pas un hub USB. Vérifiez si l’™ordinateur est connecté à l’™internet. Ici, un vidéo que vous montre le processus. (en anglais) Fermez tous les autres programmes avant la mise à jour. Si vous avez de problèmes avec l’™installation : Éssayez un autre câble USB. Toujours connectez le câble USB dans l’™arrière de l’™ordinateur. Éssayez tous les ports USB. Éssayez un autre ordinateur, c’™est possible que l’™ordinateur a des problèmes de configuration. Éssayez un autre réseau, c’™est possible que la configuration du réseau cause des problèmes. Instructions Line 6 Monkey : Démarrez Line 6 Monkey, le programme vous donne le choix quel appareil vous voulez utiliser. Sélectez le Spider IV et cliquez « OK ». Si Monkey veut registrer votre appareil, vous pouvez cliquer sur « Remind me later ». Sélectez Flash Memory et cliquez sur « Update Selection ». Si Monkey veut registrer votre appareil, vous pouvez cliquer sur « Remind me later ». Cliquez « Yes » pour continuer. Cliquez « I Accept » et « Continuer ». Cliquez « Yes » pour mettre à jour le Flash Memory. Après l’™installation (jusqu'à 5 minutes), cliquez « OK ». Maintenant, vous pouvez voir une coche verte à côté de Flash Memory.

Q: Are the XLR outputs of the LD series line level? A: Yes, the XLR outputs on all of our Lowdown amps are balanced line level outputs. The line level output not affected by the output volume of the amplifier, and will send a cabinet simulated tone to your mixing console. Q: What if I do not want the cabinet tone but rather a unaffected tone (like a DI Box?) A: If you desire an unaffected bass tone in addition to the cabinet simulated tone you will want to go into a DI box and send the DI signal to the mixing console, and have the instrument output of the DI go into the instrument input of the Lowdown amplifier. Q: What controllers work with the Lowdown series? A:The FBV series is the correct controller for the Lowdown series, we recommend the FBV Shortboard or FBV Express. The FBV (Longboard) is not optimized for use with the Lowdown family of amplifiers, and the FBV2 is not compatible with a certain amount of early LowDowns. Please contact Line 6 Customer Support in this case for assistance.

Deutsch Français Q: What are the presets on my Micro Spider amplifier? A: There are five presets on the Micro Spider: Clean, Crunch, Metal, Insane, and Acoustic. If you would like to return your unit to the original presets, please perform a factory reset. Q: How do I perform a factory reset on my Micro Spider? A: The factory reset for a Micro Spider is to hold down the clean button as you turn on the power and hold the button for 5-8 seconds. Q: Are there any videos I can view to learn about the Micro Spider? Micro Spider Movies Q: Can the Micro Spider microphone input and/or the CD/MP3 input be used at the same time with the same guitar input? Will I hear all of these devices through the headphones? A: Yes Q: I noticed that the mid-range knob reacts differently on my Micro Spider's Insane Setting than other Spider amplifiers I have played on? A: The Micro Spider's midrange control is optimized for the volume/tone features for that particular patch, so the control response may seem a little different than other Spider amplifiers. Q: Is there a “vocal eliminator” so I can jam with my CD/MP3 input without the vocals getting in the way of my incredible shredding? A: No, but that usually doesn't stop people from shredding. Setup/Connections Q: What can I connect to the Micro Spider? A: Guitars, Microphones, Basses, Acoustic Guitars, via the 1/4” instrument input. MP3/CD players via the 3.5 mm jack, headphones via the stereo ¼” output. Q: Is there a direct out on the Micro Spider? A: The headphones jack is a stereo ¼” output which can also be used as a recording output. Q: Can I use an FBV controller with the Micro Spider? A: There is no FBV control capability on the Micro Spider. Q: Can I connect an external pre-amp (i.e. Line 6 POD) to the Micro Spider? Can I connect the Micro Spider into a PA system of home stereo? A: You can connect an external preamp into the CD input or the Mic input of the Micro Spider, and connect the headphone outputs of the Micro Spider into a PA or stereo system. Q: Does the Micro Spider have an effects loop? A: There is no effect loop on the Micro Spider amplifier. Specifications Q: How do I power my Line 6 Micro Spider? A: You can use the Line 6 PX 2 (included), or you can use six (6) C-cell batteries (not included). Q: How can I get a cover for the Micro Spider? A: The Micro Spider does not have a cover available from Line 6 at this time. Registration/Warranty Q: What is the warranty on the Micro Spider? A: the warranty on the Micro Spider is twelve months from the date of purchase. Q: How can I register my Micro Spider? http://line6.com/account/registergear/ Troubleshooting/Service Q: My Micro Spider seems to be malfunctioning. What can I do as an end user? Line 6 Amp Troubleshooting. Q: Where can I get replacement knobs/speakers/logos for my Micro Spider amp? A: Line 6 Store Q: Where can I download a Micro Spider manual? Micro Spider Manual Welche Presets sind auf dem Micro Spider vorinstalliert? Es sind 5 Presets bereits auf dem Spider installiert: Clean, Crunch, Metal, Insane und Acoustic. Sollten Sie die Presets zurücksetzen wollen, dann müssen Sie das Gerät auf die Werkseinstellungen zurückstellen. Wie kann ich main Spider Micro auf Werkseinstellungen zurücksetzen? Halten Sie einfach die Clean Taste für 5-8 Sekunden während des Startens des Gerätes gedrückt. Gibt es Tutorial Videos für den Micro Spider? Micro Spider Movies Können Mikro und/oder CD/MP3 Eingänge gleichzeitig mit dem Gitarreneingang verwendet werden? Und kann ich dann alle Geräte noch durch die Kopfhörer hören? Ja und Ja. Der Mid Knopf reagiert anders im Insane Preset als auf anderen Spider Verstärkern, ist das normal? Ja, das ist so gewollt. Gibt es einen Vocal Eliminator? Nein. Installation und Anschlüsse Welche geräte kann ich an den Micro Spider anschließen? Gitarren, Mikrofone, Bässe und akustik Gitarren können an den ¼“ Instrumenteeingang, Mp3/CD Spieler an die 3,5mm Klinke und Kopfhörer an den ¼“ Ausgang angeschlossen werden. Gibt es einen Direct Out? Die Kopfhörer ¼“ Klinke ist ein stereo Anschluss, der zur Aufnahme verwendet werden kann. Kann ich einen FBV Controller mit dem Micro Spider benutzen? Nein, der Verstärker ist nicht kompatibel. Kann ich einen externen Vorverstärker oder eine Stereoanlage anschließen? Ja, den Vorverstärker können Sie an den CD oder Mikro Input anschließen und die Stereoanlage an den Kopfhörerausgang. Hat der Micro Spider einen Effects Loop? Nein. Spezifikationen: Wie versorge ich mein Micro Spider mit Strom? Entweder mit einem Line 6 PX 2 (enthalten) oder mit sechs C Batterien. Woher bekomme ich eine Schutzhülle? Line 6 stellt leider keine Schutzhüllen für den Micro Spider her. Registrierung und Garantie: Wie lange habe ich Garantie auf den Micro Spider? 12 Monate vom Kaufdatum. Wie kann ich meinen Verstärker registrieren? http://de.line6.com/account/registergear/ Problembehebung und Service: Mein Micro Spider macht Probleme, was kann ich tun? http://line6.com/support/page/articles/_/general-faq/amplifier-troubleshooting-r439#de Wo bekomme ich Ersatzknöpfe/lautsprecher oder Logos her? Line 6 Store Wo kann ich das Benutzerhandbuch herunterladen? Micro Spider Manual Quels sont les presets sur mon Micro Spider ? Il y en a cinq presets : Clean, Crunch, Metal, Insane et Acoustic. Si vous voulez les presets originaux, vous devez réinitialiser l’appareil. Comment est-ce que je réinitialise l’appareil ? Tandis que vous allumez l’appareil, maintenez enfoncé le bouton Clean pour 5 à 8 secondes. Y a-t-il des vidéos tutoriels sur le Micro Spider ? Micro Spider Movies Puis-je utiliser les entrées Micro et/ou CD/MP3 avec la même entrée guitare en même temps ? Est-ce que je peux entendre tous ces appareils dans les casques ? Oui. Le bouton Mid fonctionne différemment sur Insane avec le Micro Spider en comparaison avec les autres amplis Spider, est-ce que c’est normal ? Oui, c’est normal. Y a-t-il un « Vocal Eliminator » ? Non. Installation et Connexions : Quels appareils puis-je connecter au Micro Spider ? Guitares, Microphones, Basses et Guitares Acoustiques à l’entrée 1/4’’ Instrument. Lecteurs MP3 et CD au 3.5mm jack et les casques à la sortie 1/4" stéréo. Y a-t-il en Direct Out ? Le jack de casques est une sortie 1/4" stéréo que vous pouvez utiliser comme sortie d’enregistrement. Puis-je utiliser un contrôleur FBV avec le Micro Spider ? Non. Est-ce qu’on peut connecter un préampli externe ou une chaine stéréo ? Vous pouvez connecter un préampli externe à l’entrée CD ou Micro et connecter une chaine stéréo à la sortie de casques. Y a-t-il un Effects Loop ? Non. Spécifications : Comment puis-je alimenter mon Micro Spider ? Vous pouvez utiliser un Line 6 PX 2 ou six batteries C. Ou est-ce que je peux acheter une couverture ? Line 6 ne produit pas des couvertures pour le Micro Spider à ce moment. Régistration et Garantie : Combien de garantie y a-t-il sur le Micro Spider ? 12 mois au départ de la date d’achat. Comment puis-je enregistrer mon Micro Spider ? http://fr.line6.com/account/registergear/ Dépannage et Service : Quelque chose ne fonctionne pas, qu’est-ce que je fais ? http://line6.com/support/page/articles/_/general-faq/amplifier-troubleshooting-r439#fr Ou puis-je télécharger le mode d’emploi ? Micro Spider Manual

Q: Where can I find the manual for my Line 6 controller? A: Instructions on how to use your FBV controller can be found in the back of your specific amplifier's user manual. See the link below. user manual . Q: Which Line 6 controller works with which device? A: Please see the chart for more information on which controller will function with each Line 6 device. FBV compatibility chart Q: How do I engage the Wah? A: To engage the wah, simply press toe down on the foot pedal until it clicks over and you see the WAH light turn on. It takes a fair amount of pressure to get it to click over (if you get no results, try putting your entire weight on the toe position when you are standing). Over time this function will get easier. Q: Is it possible to control MIDI devices using the Floorboard via my Line 6 unit? For example, when I change to a specific channel/bank on the Line 6 unit, is a corresponding MIDI Program Change message sent from the MIDI Out to my other MIDI device? A: Yes, the Line 6 unit will send MIDI program change messages via it's MIDI out port when controlled by the floorboard. Q: Where are the sounds stored on the FBV board? A: The presets are always stored in the Line 6 unit, the FBV series only changes/controls the Line 6 device. Data Cable FAQs Q: What type of cables are used with the Line 6 controllers? A: The Line 6 controllers use a standard CAT-5 cable with standard RJ-45 ends. These cables are very common in data connection and can be found in most local computer outlets. The FBV controllers ship with a black 25' cable included in the box. Do not use CAT6, as it is a different impedance than CAT5. Q: How long can the CAT-5 cable be before I have communication errors? A: We have tested with cable lengths up to 50' with no problems. Q: Can I use a "cross-over" CAT-5 cable with Line 6 gear? A: You CANNOT use a "crossover" CAT-5 cable, as it may send voltage to unintended locations of your FBV Controller and damage the unit. Q: I used a new data cable to connect my FBV series controller and I saw smoke? A: It sounds as if you may have used a network "cross-over" cable, which has a different wiring configuration (but the same RJ-45 connection) as a standard CAT-5 cable. If this is the case, voltage that was intended to power the the pedal were routed to the wrong place, resulting in damage to the pedal. This FBV series controller will need to repaired/replaced. Q: Can I use a CAT-5 data splitter from my Line 6 unit(s) to run multiple FBV controllers on stage (or run multiple Line 6 units from a single controller)? A: No, The FBV controller was designed to work on its own with a single amplifier. If you feel this is a feature you would want to implement, please submit a feature request: ideascale FBV Express F.A.Q.s Q: Why doesn't the tuner feature work on my FBV Express? A: The tuner feature on the FBV Express only works when used with amps or units that feature a built-in tuner. For example the Spider II HD75 has no built in tuner, therefore the tuner on the FBV Express is disabled. Q: Can I access more than one bank of presets with my FBV EXPRESS? A: No, the FBV Express will only access the A, B, C or D channels of whatever bank your unit is selected. For example, if your POD XT is sent to BANK 5, then you would be able to access and change between 5A, 5B, 5C, and 5D. FBV and Shortboard F.A.Q.s Q: What is the difference between the FBV and the FBX controllers? A: These two pedals are identical. The pedal was originally released as the "FBX" controller, but the name was changed soon after the release to the "FBV" controller. Q: Are there any control functions on the FBV controller that will not work with all Line 6 devices? A: The FBV controller was designed for use with the Line 6 Vetta. While the majority of the buttons (i.e. A B C D) will work correctly, some buttons (i.e. amp 1/2, stomp 2/ 3, tremolo, favorite channel) may or may not have a function on your Line 6 Spider, Flextone, PODxt, POD X3, etc. See the documentation and FAQs for more specification application information. Q: I cannot see the patch name when editing my XT unit from my FBV (shortboard) controller? A: You will be able to see the patch name in the view window of the XT device, but you will not see the changes in the FBV controller window. External Expresion Pedal FAQs Q: What type of pedal do I need to use for an optional expression pedal with my Line 6 controller? A: The Line 6 EX-1 is the recommended expression pedal for additional control, and is connected to your Line 6 controller with a standard mono guitar cable. It utilizes a 10k Ohm pot. Q: When using an EX-1 expression pedal with an FBV shortboard, can I re-assign the EX-1 to control something other than volume? A: The Ex-1 expression pedal cannot be reassigned to a function other than controlling volume. Q: What are the specs for the EX-1? Line 6 Expression Pedal (EX-1) F.A.Q.s FBV MKII Questions Q: What is the difference between the original FBV series and the MKII series Express and Shortboard controllers? A: The MKII series Express and Shortboards will control any device that could be controlled by the MKI controller. See the following information for more specific physical changes: The MK II units have a USB port that can be used to connect to a computer for updating purposes or to be used as a controller for many recording softwares. Instead of Comp on the MKI, it's Stomp on the MKII. Instead of FX Loop on the MKI, it's Function 1 on the MKII. On the MKII, Function 2 is present. There is no such button on the MKI pedals, so Function 2 does nothing on older Line 6 products. The MKII Shortboard's view screen is 4 5/8" x 1/2", as compared to the 6" x 3/4" high view screen found on the MKI Shortboard. See the dimensions chart for other physical changes on the MKII series: Line 6 Product Dimensions Q: I noticed there is no driver for the FBV Mk II controller for connecting by USB. How is the FBV Mk II series recognized by a computer? A: The FBV Mk II series uses a class compliant driver that is already installed on your machine. Please see the following link if your machine is not recognizing the FBV Mk II controller: USB Connectivity with Line 6 Devices Q: Can I use the Mk II series pedals as an interface to my "MIDI-only" amplifier (i.e. Axsys, Flextone, HD147, Vetta) to update via Line 6 Monkey or edit using Line 6 edit? A: No, the Mk II device will not act as an interface for your "MIDI-only" device. Q: Can I change the assignements of the FBV buttons on the my computer that control my Line 6 device? A: The control assignments of the FBV mk II can be changed to whatever assignments you need on your computer, but the re-assigned buttons will not be recognized when connecting to a Line 6 device (the Line 6 device will only see the function(s) that were pre-determined). Q: My FBV device is no longer functional after bringing my computer out of "sleep mode"? A: This issue can be seen with many class-compliant driver devices. You can either turn off the "sleep mode" or restart your computer for the FBV Mk II unit to be recognized by your computer after coming out of sleep mode. FBV 3 FAQ Q: Can I assign the LEDs to different colors if I'm using a Line 6 product other than Firehawk 1500? A: Assignable color LEDs are available for use with Firehawk 1500 only. LEDs are red when FBV 3 is used with other Line 6 products. Q: How do I calibrate the FBV 3 expression pedal? A: You don't, the FBV 3 auto calibrates the pedal. Q: Will the FBV 3 work with my old Line 6 amp? A: Please check out the compatibility list here, FBV compatibility chart Q: I noticed there is no driver for the FBV 3 controller for connecting by USB. How is the FBV Mk II series recognized by a computer? A: The FBV 3 uses a class compliant driver that is already installed on your machine. Q: What type of pedal do I need to use for an optional expression pedal with my Line 6 controller? A: The Line 6 EX-1 is the recommended expression pedal for additional control, and is connected to your Line 6 controller with a standard mono guitar cable. It utilizes a 10k Ohm pot. Calibration Procedures Q: How do I calibrate the FBV 3 expression pedal? A: You don't, the FBV 3 auto calibrates the pedal. Note: FBV Mk II controllers will need to have firmware 1.10.0 or later installed for the calibration procedure, using Line 6 Monkey 1.31 or later. See the following link for more information on updating your firmware using Line 6 Monkey: FBV Mk II (Express and Shortboard) software update FBV Shortboard Mk. II: (Note: Before performing the calibration routine, please disconnect any expansion expression pedals IE: EX-1) 1) Hold the D button while connecting the CAT-5 cable on the FBV. The display will read 'CALIBRATE PEDAL' until the D button is released, at which point it will read '1 PEDAL TOE'. 2) Press and hold the internal pedal toe-switch until the LCD changes to '2 PEDAL MIN'. This should occur instantly. 3) Set the heel to (minimum) position, press the D button. The LCD will change to '3 LCD MAX'. 4) Set the toe position (maximum) and press the D button. The LCD will change to 'CHECK VALUE 127'. 5) Move the pedal and verify that the value reaches 0 in the minimum position and 127 in the maximum position. 6) Press D to exit FBV Express Mk. II: 1) Hold D while powering on the FBV. Upon release, the pedal display will read '1'. 2) Press and hold the pedal toeswitch until the 7 segment display changes to '2'. This should occur instantly. 3) Set the heel to the heel (minimum) position, press the D button. The 7 segment display will change to '3â'. 4) Set the toe position (maximum) and press the D button. The tuner LEDs above the 7 segment display will light. 5) Move the pedal and verify that the tuner LEDs sequentially turn off as the pedal moves to the minimum position, and refills when moved to the maximum position. 6) Press D to exit FBV Express (Mk I): 1) Unplug the RJ45 cable from your FBV EXPRESS 2) Move the expression pedal all the way to the toe down position 3) Hold down the A and D switches 4) Plug in your RJ45 with the switches still depressed and hold this for 10 seconds (you will see the LED go blank) 5) Move the expression pedal to the heel position and then all the way forward to the toe. 6) Shift all of your weight to the toe position (you will want to stand up) until the WAH light switches on. 7) Wait 10 seconds and click back to VOL. Your FBV EXPRESS is now calibrated. FBV Shortboard Calibration (Mk I) 1. Attach the CAT-5 cable from your Line 6 device to your FBV shortboard. Power on the Line 6 device. The FBV Shortboard LEDs should cycle and the display should read "LINE 6" with the backlight lit up. 2. Once the pedal is fully powered and showing the the preset from the Line 6 device, move the ONBOARD expression pedal to the center position, roughly halfway between the toe (maximum) and heel (minimum) position. 3. Press STOMP + DELAY + REVERB and hold for three seconds to begin calibration of the ONBOARD pedal. 4. Move the ONBOARD pedal to its MAXIMUM position (pedal all the way toe down) and press down hard enough to click the pedal's toe switch. You want need to stand up and put your fullweight on the pedal to ensure the pedal switches over you will hear a slight "click" sound. The second number grouping (from the left) in the display should read "127" 5. Move the ONBOARD pedal to its MINIMUM position and press down (pedal all the way heel down). The second number grouping (from the left) in the display should read "0". **If you have an EXTERNAL pedal, hook it up to your FBV SHORTBOARD now and continue on to step six. If you do NOT have an external pedal, simply turn off your Line 6 device, you are done calibrating. 6. Move the EXTERNAL pedal to the center position, roughly halfway between the MAXIMUM and MINIMUM position. 7. Press BANK DOWN + STOMP + DELAY and hold for three seconds, to begin calibration of the EXTERNAL pedal. 8. Move the EXTERNAL pedal to its MAXIMUM position (pedal all the way toe down). 9. Move the EXTERNAL pedal to its MINIMUM position and press down (pedal all the way heel down). 10. Turn OFF your Line 6 device. You have just calibrated your EXTERNAL pedal. FBV/FBX Pedal 1. Connect your FBX to your amp. The LEDs should cycle and the LCD should display "LINE 6" with the backlight lit. 2. Move both pedals to their center positions roughly halfway between the MAX and MIN position. 3. Press AMP1 + AMP2 + PITCHSHIFT/TREMOLO and hold for three seconds. This will reset the calibration values for the pedals to their default values. 4. Press AMP1 + AMP2 + DELAY and hold for three seconds. This will now display the pedal information for the LEFT pedal. 5. Move the LEFT pedal to its MAX position (pedal all the way toe down) and press down hard enough to actuate the pedal's toe switch. NOTE: You will only see 000 in the first column (AAA) until you click the toe switch down. 6. Move the LEFT pedal to its MIN position and press down (pedal all the way heel down). 7. Check the range on the MAX (number displayed on right hand side of the display) and MIN (number displayed second from right hand side of display) values to see that they are within spec (Pedal Testing section above). 8. Move the pedal to its MIN position. With the pedal just sitting there, check the number displayed in the second column (BBB). It should read 000. Press the pedal down at the heel position. This number should still read 000. 9. Press AMP1 + AMP2 + MODULATION and hold for three seconds. This will now display the pedal information for the RIGHT pedal. 10. Repeat steps 7 through 9 only for the RIGHT pedal. FBV Series Troubleshooting procedures: Calibrate the pedal (using the methods previously discussed). Ensure that all washers/nuts/screws are seated correctly and tight. Use a different CAT-5 cable to be sure the cable is functioning correctly. Use a different Line 6 device to ensure the problem is not in the CAT-5 input of the Line 6 device. If the unit is out of warranty: Open the bottom of the unit by removing the screws, and tighten the hex nut that holds the pedal to the chassis (the torque is 19 psi.) If you have no success with the troubleshooting suggestions above, please take your controller to the nearest Authorized Service Center.