Search the Community
Showing results for tags 'firmware'.
-
I'm guessing that the new global EQ (without throwing any more drama into all this) will fix the whole cab vs, DI brightness issue. What I should be able to do, once it's updated, is get my patches sounding good through my (insert frfr of choice here), and then switch to either cans or PA and roll down the hi cut until the extra brightness is gone, correct? If I bring it down until just before the frfr cab starts to lose top end, then it should be a closer match, if it works right. I always have to end up making lots of eq adjustment when I playing direct with IEMs, and maybe that will be solved soon.
-
Hi! I did a firmware upgrade to my spider IV 75 through a fvb mkII pedalboard. The proceder seemed correct. The new efects sounds great, but the pedalboard didn't work again. The display doesn't light anymore and none of the pedals work. It is unable to connect to the computer vÃa USB. It isn't recognized by the monkey. Any similar experience? Any idea? Could the update file be corrupted? Maybe the routine to manage the pedalboard is not complete? Would a factory reset fix the problem? Thank you and excuse my poor english -
installed the line6 monkey program right now and it says my m5 is on the latest (1.0) firmware...is this an error or has there really never been any firmware upgrade....? thanks, rudi
-
AMPLIFi Firmware Release Notes: AMPLIFi 75/150/TT/FX100 firmware v2.50.2 AMPLIFi Firmware 2.50.2 is a free firmware update that includes fixes and optimizations. It is highly recommended that all AMPLIFi users perform this update! AMPLIFi Remote 2.13 or greater is required for use with this firmware. Please update your AMPLIFi remote app on iOS or Android before upgrading to this version of firmware. The easiest way to perform the update process is by installing the latest version of Line 6 Updater. Once you've connected AMPLIFi to your computer via USB port (hubs are not supported), Line 6 Updater will recognize the unit and take you through the update process. PC users will need to install the AMPLIFi device driver. Line 6 Updater application and drivers may be downloaded here: http://line6.com/software/ New Feature: "Assign to Pedal" support allows you to use the built-in pedal on FBV Shortboard and FBV Express to control parameters assigned to the FX Knob. These parameters are assigned by pressing and holding on the desired parameter in the AMPLIFi Remote app. Bug Fixes: -Improved Bluetooth connection stability and reconnect behavior -Other minor bug fixes and optimizations AMPLIFi 75/150/TT/FX100 firmware v2.10 All AMPLIFi units USB 2.0 recording for Mac OSX 10.7+ and Windows 7/8 Class-compliant Mac/iPad drivers @ 24bit/48K (these drivers are in OSX 10.7+) ASIO driver version 1.64 for Windows that provides 16/24 bit, 44.1/48/88.2/96K recording and sample rate conversion. This can be adjusted in the Windows Sound Control Panel. USB audio streaming buffers and default bit depth can be set in the AMPLIFi Control Panel, or from within a DAW. Driver must be downloaded and installed from www.line6.com/software. [*]Bug fixes and enhancements. [*]Tap tempo light can be toggled on and off via the Remote app [*]Adjusting the reverb knob will automatically enable the reverb block if it happens to be turned off [*]At this time, it is recommended to perform the update using the AMPLIFi Utility for PC found at www.Line6.com/software, using instructions found at http://line6.com/support/page/kb/_/amplifi-products/ampl/how-to-update-amplifi-with-a-pc-r701 75/150-specific items A 12dB gain stage has been added to the guitar in the headphone output of the 75/150 to make the guitar/Bluetooth blend sound the same in the headphones as it does through the speakers. FX100-specific items No FX100-specific items in this release. TT-specific items The previous AMPLIFi TT firmware provides a USB stream that is 12dB too hot and always clips the input of a DAW unless you crank it down on the hardware (white LED ring on the big knob). This issue is fixed in this release. ​ AMPLIFi 75/150/FX100 firmware v2.00.0 Firmware adds SPP Bluetooth capability for data communication with Android devices. This update is NOT required for iOS users, but will require version 2.00 of the iOS app as device names have changed. AMPLIFi 75/150/FX100 firmware v1.01.0 Ability to turn individual effects on and off within a single preset using the 'STOMP', 'MOD', 'DELAY', 'REVERB' footswitches. Navigate the 100 on board preset locations using the Bank and Preset footswitches available on the FBV Shortboard MKII. Two way communication added between the AMPLIFi 75/150/FX100 and the AMPLIFi Remote App so that changes made to the AMPLIFi hardware instantly are shown within the AMPLIFi Remote App. Resolved an issue with zipper noise when using the wah on FBV MKII controllers. Improvements made to Bluetooth connection. AMPLIFi 75/150 firmware v1.00.5 Several fixes were put in place that improve Bluetooth data communication and stability with the AMPLIFi Remote application. AMPLIFi 75/150 firmware v1.00 Initial release.
-
Having trouble getting my fx100 set up. The device pairs with the fx100 but nothing I do in the app affects the tone in the fx100. It keeps telling me to update the firmware. I have done this and it says successful, but it still continues to say version 1 and that I should update. I have reset the fx100 to factory settings and calibrated the way pedal. Any suggestions before I send it back?
-
Not sure on the firmware version of my Relay G30
lachinelli posted a topic in Relay Digital Wireless
Some weeks ago, maybe a month ago, I aquired a Relay G30 set. Since I live in Argentina, I'm not quite sure if they are just out of the oven. Since I have an important gig this Sunday, and I bought the G30 specially for this type of gigs and I wanted to know the firmware version, so I could use it in RF1 mode (I've read it's safer). I made the 1-6 x3 switch change but I've only got a 1 green blink response, which is no different than what I get when the switch reaches to 6 or 1 in this process. I've made this several times, with the receiver turned on and off as well. If I should trust the results, it seems my G30 has firmware version 1.00, but I'm not quite sure. Is there any other way to check the firmware version? So far at home and at rehearsals it has been working excellent, and I wouldn't want to change to RF2 accidentally so I haven't followed the RF change process. I also check for Wi-Fi routers with my smartphone to select the channel I'm going to use to avoid interference, according to the chart given in the Knowledge Base. -
There has got to be a better way to plug in my HD500 and JTV 89 and edit. Yesterday I was in the studio and had some clicking issues when changing patches and I also wanted to write a DADGAD patch for my JTV. So when I got home... I started Monkey and had to update several things. I forget exactly what I needed to update, but it took a while. Then I needed to open Workbench. So I opened the program and realized that it doesn't work with JTV, (but I need to keep it because I still have a Variax 500.) So I opened Workbench HD. I can't find the JTV Interface and cords. I search for about fifteen minutes and it is where I looked the first time! Oh yeah, I have to have a 1/4 cord plugged in to the guitar jack. Oh no, my battery is dead. I have to charge it overnight... Today, battery charged and ready to go. Everything is plugged in. I open Workbench. It seems to be working so I do some edits and I get a message saying it can't send the preset to the guitar... I go to Line 6 Support and do a search for the exact words of the error message and nothing comes up. I do another search and I'm searching within my current results, so I back out and try it again in the forum, in the knowledge base... Nothing. Am I the only one having this problem? So I try the "Error Code." No luck. I put my problem in my own words and finally get a result that seems to apply that isn't in Japanese or German. The guys ultimate solution was sending his guitar back and getting a new one!? Somewhere in the responses someone mentions a JTV firmware update. I go back to Monkey to see if I have the most current firmware for the guitar. Now the interface is only showing one green light and one red light. I unplug. I plug. I remove the battery. I put the battery back. Somehow I get Monkey to find the guitar. But in the process I realize that I'm now installing the midi interface, which I don't need, and it is telling me I'll need to reboot the computer to complete the installation. Rebooted and read to check Monkey! I have 2.0, I need 2.1. Now Monkey isn't recognizing my guitar again. I unplug. I plug. I remove the battery. I put the battery back. Two green lights! I update the guitar! I go to Workbench HD and it works! ...Almost 24 hours later. "Elegant and user friendly, this is not," said Yoda. I don't even remember why I wanted the DADGAD patch and I'm too frustrated to play even if I could remember. Then end result is fine. I'm a big Line 6 fan. Nice guitar, great versatility, but there has to be a better way to integrate all these updates. I'll bet you Line 6 guys know I'm right and you probably wish it was better as well. I'll bet you'd have a lot more customers. $$$ -
Hi to all , I just purchased a DT25 head and I am trying to connect it to Monkey to see what firmware I have. I first tried using a cheap Chinese ebay cable and I was getting no lights on the midi side. I went out today and bought a hosa midi to usb converter and I am having the same issue. No lights on the Midi side, just on the usb side. I connected Midi in of converter to Midi out on the amp and vice versa for the Out. Any help would be greatly appreciated. Thanks again.
-
Video Tutorial - How To Update AMPLIFi Firmware via iOS
Line6david posted a article in AMPLIFi Videos
-
I got me an M5 stompbox for christmas (nice!). The unit is even superior than the POD Farm I have at home in some of the effects it contains, but I miss one particular distortion called "Bass Overdrive". It's the only overdrive with rich low frecuencies in the whole "overdrive-dirtortion" zone. For bass players is the "Always On" kind of effect, and for metal guitars that require powerful bass is a must have on the L6 arsenal. A suggestion for future firmware updates. Who'd like to have that too in your M5? Chalo
-
I was just thinking about my pedal tonight and thought I would drop in and see if there has been any newer Firmware/s added for my M9 pedal. I see the line 6 Monkey keeps updating, but my question is: 1. Should I load the older M9 Firmware Version 2.01.00 Then Version 2.02.00 then the Version 2.04.00 OR Does the latest Version 2.04.00 have all the previous fixes for the pedal?
-
Hopefully improving the acoustic guitar sounds further. -
Hi - Is the Firmware update v2.0 necessary if using an HD500 with the DT25 amp? I don't want the expense of MIDI cables and the extra work involved if I get everything through the HD 500 anyway. Cheers. -
When the Monkey says to back up your presets because you might lose them in a Firmware update, they ARE NOT kidding. :( Thank goodness this isn't a production server....
-
So today I go to get into POD HD Edit and the program tells me I have to update. No problem I think, and head over to the monkey. Sure enough, it says my firmware needs to be updated, and it can't determine my current version but wants me to update to firmware 2.10. I click update and that's when the fun began. I got this message: "Update timed out waiting for response from device" Well $%^... So I went through it again (and again and again etc...) and still, no joy. I downloaded a file called p18.phf and got the same results. Along the way: - It informed me my patches may not work and to consult some place for more info. I'm not far enough along to be worried that much over presets yet. - I tried saying DON't save the patches - I tried saving the patches first - I tried from the Internet - I tried from that file - I got REALLY pissed off because I wanted to work on what I was wanting to do, and not screw with computers today. I code the things for a living! So anyone have a vague clue where to go from here, short of ditching the whole thing? I am half serious too...my "regular" guitars, amps, effect pedals just work and don't require me to upload or download squat. I MIGHT have to change a string or a tube. Maybe. But I NEVER have to screw with a computer to get something done, ever.
-
Im running on Mac OS X 10.6.8 and Ableton Live 8 Suite and having problems with the inputs with KB37. The device works well as an audio device, plays beats and audio, and responds to midi (keyboard works), but I can't get the inputs working. The mics and guitars connected are simply not responding, and the analogue volumemeters don't move at all. When I try to update the Firmware with latest version of Monkey, on Flash memory installation it gives error "Code 80007204 Hardware device failed to enter update mode" (when I replug the device in the part instructed). If I don't replug, but press cancel instead, it starts to download and install the software but gives error "Code 80007209 Firmware version verification failed." I have tried different ports and cables. I have also re-installed all possible apps, drivers, firmware, and even monkey itself. In Monkey it says that the version of Flash memory of Firmware is "unknown", though the latest seems to be 1.03. (I wonder if I could somehow get some older versions of flash memory firmware and try if they'd work?) Heelp! Here are some screenshots: -
Hello, I'm new to the forum and to Line 6 products. I just bought a used DT-25 from GC and would appreciate some assistance regarding the version 2.0 Firmware Update. I also own a HD500X & JTV-69 HSS if that helps with assisting me. I'm really a novice when comes to MIDI, DT-25 & POD HD500X and ask that your assistance be as detailed and complete as possible. I really appreciate it! How/where can I find which firmware version is currently installed in the DT-25? If I am satisfied which amps are assigned to voicings 1-4, do I really need to do this firmware update? Do I need to buy a MIDI to USB cable, and two MIDI cables to do this firmware update (if I find it hasn't been done)? If I do need to buy the cables, where would I find a cheap MIDI to USB (the one I found on Sweetwater is $50!) Is there any other device, cable, etc I also need to buy? In the DT Firmware Installation Guide I find the following confusing... 'Connect your MIDI interface to your computer, and ensure that it functions properly. Then connect your MIDI interface to your DT amp via the two MIDI cables. The MIDI “Out†of your interface should connect to the DT amp’s MIDI “Input,†and the MIDI “Output†of the DT amp should return to the MIDI “Input†jack on your MIDI interface.' The statement above is completely Chinese to me! What is the 'MIDI Interface' (is this another thing I have to buy + the cables)? And how would I connect it to my computer? Thanks in advance for all who assist me. Dr. C
-
StageScape M20d Firmware 1.20 Update Information
line6jonb posted a article in StageScape M20d Mixer
Version française. Deutsche Version. The 1.20 firmware update for the StageScape M20d features a new fader view for enhanced control on touch screens and Artist Presets. ****Please be aware that if you are updating from firmware 1.00 directly to 1.20, the update file will state that you are installing version 1.32. This is a typo that will be fixed in the future and it will have no affect on your firmware 1.20 installation or functionality.**** IMPORTANT NOTICE: This version of the StageScape firmware works only with StageScape remote app v1.10. Please update your StageScape remote app on your iPad when updating your StageScape firmware. When updating firmware, have ONLY the SD card or USB drive that is being used to install the update plugged into the StageScape. This update is available from this web address http://line6.com/software/index.html. Be sure to select StageScape M20d under All Products, click the red Go button, and you will be able to download the Firmware 1.20 update. You will have to download this file and save it to a SD card or USB thumb drive. Insert that device into your StageScape M20d, go to the i menu, Show System Settings, Update M20d, Update System Firmware. The update file will have to be in the top hierarchy of your media device. Firmware install files will not be recognized if they are placed in a folder. Be sure to unplug any other media device (USB, SD card or PC) from your StageScape that is not being used for the firmware update. New Features Bug fixes: Output preset recall resetting output level Minor bug fixes Fader View: With the new 1.20 firmware, the perform mode now has a fader view option on the touch screen of the StageScape M20d. This allows you to view and manipulate levels for your inputs, monitors, global FX, and main mix as virtual faders on the touch screen. You can also control your trim, pan, and global FX send levels with the rotary encoders under each virtual channel strip. Artist Presets: Brad Madix and Daniele Di Giovanni Brad Madix: Rock Kick - Aggressive rock bass drum. Sits in the mids when you really lay into it, somewhat more natural when played quietly. Rock Snare - A "fat" rock snare with a bottom that is shaped using the dynamic eq. Pushes up the low end for that "arena rock" sound. Drum Buss Crush - Crush a drum sub mix. Really pumping compression. Scary on its own, but blend it back in with the uncompressed drums and the whole kit will come forward. A little goes a long way. Rock Bass - Big mid boost to get the bass to pop out in the mix Rock Guitar - Bright and cutting. Best for leads. Vocal - Bright and clear without sibilance using the de esser Brighten up that male vocal without it getting too "essy". Daniele Di Giovanni: Grand Piano (PianoMic)- Earthworks PianoMic at its best Attention, cette version du firmware StageScape a une nouvelle vue fader pour un contrôle augmenté sur les écrans tactiles et les presets Artistes. ***Si vous installez firmware 1.20 sur 1.00, la mise à jour indique que vous installez version 1.32. C’est une faute de frappe. Ignorez ca. Il n'aura aucun effet sur ​​votre firmware 1.20 ou l’installation.*** Attention, cette version firmware fonctionne uniquement avec l’application StageScape Remote 1.10. Donc vous devez mettre à jour l’application StageScape pour l’utiliser avec la nouvelle version du firmware. Débranchez tous les appareils USB de votre StageScape sauf l’appareil avec le nouveau firmware. Vous pouvez trouver la mise à jour ici : http://fr.line6.com/software/index.html. Sélectez le StageScape M20d sous « All Products » et cliquez « Go ». Téléchargez le Firmware 1.20 et sauvez le fichier sur une carte SD ou clé USB. Insérez la carte ou la clé dans votre M20d et cliquez sur le menu « i », « Show System Settings », « Update M20d » et « Update System Firmware ». Placez le fichier directement sur la carte SD ou clé USB et pas dans un dossier sur la clé/la carte. L’appareil ne trouvera pas le fichier si vous le placez dans un dossier. Débranchez tous les autres dispositifs du StageScape M20d que vous n’utilisez pas pour la mise à jour. Corrections des bugs mineurs. Fader View Avec la mise à jour du firmware 1.20 le mode perform a une option Fader View sur l’écran tactile qui vous permet de voir et manipuler les niveaux des entrées, moniteurs, Global FX et du mix principal comme curseurs sur l’écran tactile. Vous pouvez aussi contrôler Trim, Pan et Global FX niveaux d’envoi avec les encodeurs rotatifs dessous les canaux. Presets Artistes: Brad Madix et Daniele Di Giovanni Brad Madix: Rock Kick: Grosse caisse rock agressive. Très naturel si vous le jouez doucement. Rock Snare: Basses formés avec l’EQ dynamique. Augmente les basses pour un son « arena rock ». Drum Buss Crush: Compression massive. Jouez-le avec une batterie non compressée. Rock Bass: Un boost pour les mis. Rock Guitar: Très bien pour le joueur principal. Vocal: Pour on son très clair. Daniele Di Giovanni: Grand Piano (PianoMic) – Le PianoMic de Earthworks à son meilleur. Das Firmwareupdate 1.20 für StageScape M20d erweitert Ihr M20d um zusätzliche Schiebregler für mehr Kontrolle und neue Artisten Presets. ***Achtung, wenn Sie von Firmware 1.00 auf 1.20 aktualisieren wir das Update Ihnen anzeigen, dass Sie Version 1.32 installieren. Dies ist ein Schriftfehler, der in Zukunft behoben wird. Ignorieren Sie diesen Fehler, denn er beeinträchtigt die Funktionalität des Updates nicht.*** Achtung, diese Firmware Version funktioniert nur mit der StageScape Remote App 1.10. Wenn Sie die Firmware aktualisieren, entfernen Sie bitte zuerst alle anderen SD Karten und USB Sticks abgesehen vom USB Stick oder SD Karte, auf welcher die neue StageScape Firmware abgespeichert ist. Dieses Update können Sie auf der Internetseite http://de.line6.com/software/index.html finden. Wählen Sie das M20s unter All Products aus, klicken Sie dann auf Go und dann sollten Sie das Update auch schon sehen. Laden Sie sich hier dann Version 1.20 herunter. Speichern Sie es dann auf einem USB Stick oder einer SD Karte ab. Stecken Sie diese dann in den M20d. Auf dem M20d gehen Sie dann auf das i Menu, Show System Settings, Update M20d und Update System Firmware. Die Datei muss sich direkt auf der SD Karte/USB Stick befinden un dort nicht innerhalb eines Ordners. Fehlerbehebungen: Kleinere Fehlerbehebungen. Neue Schiebregler: Mit der neuen Firmware Version 1.20 ist der Perform Modus um ein Set Schiebregler erweitert worden. Mit diesen können Sie Input, Monitor Global FX und Main FX Pegel auf dem Touchpad einstellen. Außerdem können Sie Trim Pan und Global FX Pegel via der normalen Drehknöpfe verändern. Artisten Presets: Brad Madix: Rock Kick: Agressives Rock Schlagzeug. Klingt sehr natürlich wenn man es ruhig spielt. Rock Snare: Die niedrigen Frequenzen sind per dynamischem EQ geformt. Drückt den Bass außerdem nach oben für den typischen Arena Rock Sound. Drum Bass Crush: Extreme Kompression. Mischen Sie diese dann mit unkomprimiertem Schlagzeug um einen einzigartigen Sound zu bekommen. Rock Bass: Boost für die Mitten. Rock Guitar: Perfekt für den Lead. Vocal: Für klaren Sound. Daniele Di Giovanni: Grand Piano (PianoMic): Earthworks PianoMic. -
my gear: Spidervalve HD100 MK2 FBV longbard (formerly FBX) Windows 7 Ultimate SP1 64 bit desktop Intel Core i5 CPU M-Audio 1x1 MidiSport M-Audio DELTA Audiophile 2496 tried to install the SPIDER FX INFUSION v2.0 getting the error in object, first through 1x1 Midisport then through Delta 2496; once again even via my 32 bit Windows XP laptop. nothing came out in any case... any news? could anybody help? thanx.
-
Deutsch Français Workbench HD is the companion editor for the James Tyler Variax HD firmware update. The all-new Variax Workbench HD software lets you mix and match body styles, pickups, components and more to create unique instruments or revered classics. Thanks to a variety of customer-requested features, you have even more control when tweaking existing HD instruments or creating new ones from scratch. Think of it like your own personal custom shop for James Tyler Variax. Workbench HD is available as a download from the Line 6 Download page or the Line 6 Monkey update utility software. Workbench HD works with all James Tyler Variax guitars with Variax HD Flash Memory 2.0 or greater. The Variax Workbench HD installer and Variax Workbench HD software provide instructions for setting up your computer, Variax, and the included hardware and software. Please run the installer or the Variax Workbench HD software to view those instructions. You need to be connected to the Internet to perform this installation. ***The James Tyler Variax must be connected to your computer via the Workbench VDI to USB interface in order to use Workbench HD. Known issues: - Workbench HD does not support computer connections via POD HD devices. You must use the Workbench VDI to USB interface only. Variax Workbench HD: Versionshinweise: Workbench HD ist der Begleiteditor für das James Tyler Variax HD Frimware Update. Die vollkommen neue Variax Workbench HD Software erlaubt Ihnen das Mischen und Anpassen von Body Styles, Pickups, Components und mehr um einzigartige Instrumente oder verehrten Klassiker zu erstellen. Dank der Vielfalt an neuen, von Benutzern gewünschten Eigenschaften haben Sie sogar noch mehr Kontrolle beim optimieren von bereits existierenden oder entwerfen neuer HD Instrumenten. Sehen Sie es als Ihren eigenen kleinen Custom Shop für James Tyler Variax. Workbench HD ist erhältlich als Download von der Line 6 Download-Seite oder per Line 6 Monkey. Workbench HD funktionniert mit allen JTV Gitarren mit Variax HD Flash Memory 2.0 oder neuer. Das Variax Workbench HD Installationsprogramm und dies isntalleirte Software an sich bieten Anweisungen dazu, wie Sie Ihren Computer, die Gitarre und dazugehörige Hardware und Software konfigurieren müssen. Starten Sie einfach das Installationsprogramm um diese Informationen zu erhalten. Sie müssen eine Internetverbindung haben um die Installation durchführen zu können. Achtung, die JTV Gitarre muss an den Computer via Workbench VDI zu USB Schnittstelle angeschlossen sein damit Sie Workbench HD nutzen können. Bekannte Fehler: Workbench HD unterstützt keine Computerverbindungen via POD HD Geräte. Sie müssen die Workbench VDI zu USB Schnittstelle dazu benutzen. Variax Workbench HD: Notes de version: Workbench HD est l'éditeur compagnon pour la mise à jour du firmware James Tyler Variax HD. Le nouveau logiciel Variax Workbench HD vous permet de mélanger et assortir des Body Styles, Pickups, Components et plus pour créer des instruments uniques ou classiques révérés. Grâce à une variété de fonctionnalités demandées par les clients, vous avez encore plus de contrôle lorsque l'ajustement des instruments existants HD ou lorsque vous créez des nouveaux. Pensez-y comme votre propre boutique personnelle James Tyler Variax. Workbench HD est disponible comme téléchargement sur le site web des téléchargements de Line 6 ou via le logiciel Line 6 Monkey. Workbench HD fonctionne avec tous les guitares James Tyler Variax avec Flash Memory 2.0 ou plus nouveau. Le programme d'installation de Variax Workbench HD et le logiciel Variax Workbench HD fournissent des instructions concernant le setup de votre ordinateur, la Variax et le logiciel et hardware inclus. Démarrez le programme d'installation du Workbench HD pour voir ces instructions. Vous devez être connecté à l'internet pour effectuer l'installation. Attention, la guitare James Tyler Variax doit être connectée à l'ordinateur via l'interface Workbench VDI à USB pour utiliser Workbench HD. Problèmes connus: Workbench HD ne soutien pas les connexions ordinateurs via appareils POD HD. Vous devez utiliser l'interface Workbench VDI à USB uniquement. -
For JTV-89 Customers Only: In addition to the 28 electric, acoustic and electric instruments, you also get five high-gain models exclusive to the JTV-89 guitars based on the high output magnetic pickups loaded into the Custom 1 Bank. Each model is based on a different pickup position, and delivers high-gain guitar tone while allowing you to access drop tunings, custom Dream Rig configurations and more. Because of this, you will NOT be able to modify or save your own custom settings to the Custom 1 Bank on the JTV-89 and 89F guitars. Deutsch: JTV-89 und 89F Custom 1 Bank mit v1.90 und neuerer Firmware. Nur für JTV-89 Nutzer: Zusätzlich zu den 28 elektrischen und akustischen Instrumenten bekommen Sie 5 High-Gain Modelle, die für JTV-89 Gitarren exklusiv sind. Diese sind basierend auf der hohen Ausgabe der magnetischen Pickups in der Custom 1 Bank. Jedes Modell ist basiert auf einer anderen Pickup Position und liefert einen High-Gain Gitarrenklang während Sie gleichzeitig auf Drop Tuning, die Dream Rig Einstellungen und mehr zugreifen können. Daher können sie Ihre eigenen Einstellungen und Änderungen nicht auf der Custom 1 Bank der JTV-89 und 89F Gitarren abspeichern. Français: JTV-89 et 89F Custom 1 Bank avec v1.90 et firmware plus recente. Seulement pour les utilisateurs de la JTV-89: En plus des 28 instruments électriques et acoustiques, vous obtenez 5 modèles à gain élevé qui sont exclusives pour les guitares JTV-89. Ces modèles sont basés sur les micros magnétiques de la Bank Custom 1. Chaque modèle est basé sur une autre position du micro et fournisse un ton de guitare High-Gain pendant que vous pouvez accéder Drop Tuning, les réglages Dream Rig et plus. Donc vous ne pouvez pas enregistrer vos réglages et changements sur la Bank Custom 1 des guitares JTV-89 et 89F.
-
Hi folks, I have recently purchased an HD500 and DT25. I have flashed the HD500 no problem but I am getting the common errors with the DT25 when attempting to flash using usb-midi cable. I have tried all the suggested tricks but it does look like I need to buy a decent midi controller. I was already on the lookout for a simple midi keyboard controller to enable me to record some basic synth / percussion etc on cubase. I am looking at a :- Behringer UMX250 U-Control 25 Key USB/MIDI Controller Keyboard with USB/Audio Interface Anyone know if this will enable me to flash the DT25 or is it the wrong sort of device for that? Cheers in advance, Steve (PS any tips on a better small midi keyboard controller around the £100 mark will be gratefully received)
-
StageScape M20d Firmware 1.10 Update Information
Line6Tony posted a article in StageScape M20d Mixer
Deutsch Français StageScape Firmware v1.10 IMPORTANT NOTICE: This version of the StageScape firmware works only with StageScape remote app v1.10. Please update your StageScape remote app on your iPad when updating your StageScape firmware. When updating firmware, have ONLY the SD card or USB drive that is being used to install the update plugged into the StageScape. This update is available from this web address http://line6.com/software/index.html. Be sure to select StageScape M20d under All Products, click the red Go button, and you will be able to download the Firmware 1.10 update. You will have to download this file and save it to a SD card or USB thumb drive. Insert that device into your StageScape M20d, go to the i menu, Show System Settings, Update M20d, Update System Firmware. The update file will have to be in the top hierarchy of your media device. Firmware install files will not be recognized if they are placed in a folder. Be sure to unplug any other media device (USB, SD card or PC) from your StageScape that is not being used for the firmware update. New Features New recording features, including marker functions (create, list and seek to marker) and fast forward/reverse 10 seconds at a time. Join an existing wireless network. Stereo Monitoring Fixed Issues: Status of the phantom power of channel 7- 12 was not saved with setups on previous firmware version. An audio "clicking" artifact in the chorus effect has been removed. Other minor bug fixes. Informationen zum StageScape M20d Firmware Update 1.10 StageScape Firmware v1.10 ACHTUNG, WICHTIG: Diese Version der StageScape Firmware funktioniert ausschließlich mit der StageScape remote app v1.10. Bitte aktualisieren Sie Ihre StageScape remote app auf Ihrem iPad wenn Sie die StageScape Firmware aktualisieren wollen. Wenn Sie Firmware aktualisieren entfernen Sie jegliche Geräte von Ihrem StageScape und lassen Sie nur die SD Karte oder den USB Stick im StageScape, den Sie brauchen um die Firmware zu aktualisieren. Dieses Update können Sie auf der folgenden Webseite herunterladen: http://de.line6.com/software/index.html Wählen Sie im "All Products" Menu StageScape M20d aus und klicken Sie auf den "Go" Knopf dann können Sie die 1.10 Firmware herunterladen. Laden Sie sich die Datei herunter und speichern Sie diese auf eine SD Karte oder einen USB Stick. Stecken Sie das Gerät in Ihren StageScape M20d, gehen Sie in das "i" Menu -> Show System Settings -> Update M20d -> Update System Firmware Die Datei zur Aktualisierung, muss im Stammverzeichnis des USB Sticks/SD Karte sein. Installationsdateien für die Firmware werden nicht erkannt wenn diese in einem Ordner sind. Entfernen Sie alle anderen Geräte, Ihren PC oder SD Karten vom StageScape, die nicht zum Update benötigt werden. Neue Aufnahmemöglichkeiten: Marker Funktionen (erstellen, auflisten und suchen nach Markern) und 10 Sekunden Vorspulen oder Zurückspulen pro Klick. Einem bestehenden kabellosen Netzwerk beitreten. Stereo Monitoring Behobene Probleme: Der Status der Phantomspeisung für die Kanäle 7 bis 12 wurde nicht abgespeichert auf vorherigen Firmware Versionen. Ein "Klick" Artefakt im Chorus Effekt wurde entfernt. Andere kleinere Fehlerbehebungen. StageScape M20d: Informations concernant la mise à jour 1.10 de la firmware StageScape Firmware v1.10 REMARQUE IMPORTANTE: Cette version de la firmware StageScape fonctionne exclusivement avec la version 1.10 de la StageScape remote app. Veuillez mettre à jours votre StageScape remote app sur votre iPad si vous voulez mettre votre firmware StageScape à jours. Si vous actualisez votre firmware, détachez tous sauf la carte SD ou clé USB que vous avez besoin pour installer la mise à jour. Cette mise à jour est disponible sur ce site web: http://line6.com/software/index.html. Choisissez StageScape M20d dans la catégorie "All Products", cliquez le bouton rouge "Go" et vous pouvez télécharger la mise à jour 1.10 de la firmware. Téléchargez ce fichier et enregistrez-le sur un disque amovible. (Carte SD ou clé USB) Insérez ce périphérique dans votre StageScape M20d, allez dans le Menu "i" -> "Show System Settings" -> "Update M20d" -> "Update Firmware". Le fichier doit être dans le dossier racine de votre clé USB/carte SD. (Le fichier ne peut pas être dans un sous-dossier.) L'appareil ne reconnait pas le fichier s'il est dans un dossier. Détachez tous les autres appareils media (PC, clé USB, carte SD) de votre StageScape que vous n'avez pas besoin pour cette mise à jour. Nouvelles fonctions d'enregistrement. Des fonctions marqueurs (créer, inscrire et chercher à marqueur) et avance ou retour rapide de 10 secondes par clic. Joindre un réseau sans fil. Monitoring stéréo. Problèmes résolus: L'état d'alimentation fantôme sur les canaux 7 à 12 n'enregistrait pas sur les versions précédentes de la firmware. Un artefact "clic" a été enlevé dans l'effet chorus. Autres corrections des bugs mineurs. -
Update Instructions: All Spider Valve Mk II 112, 212 and HD100 amplifiers can be updated using an FBV MkII Express, FBV MkII Shortboard, or via MIDI with a USB to MIDI interface as follows: Connect your FBV MkII to your Spider Valve MKII using a standard FBV cable. Connect your FBV MkII to your computer using a standard USB cable. Launch Line 6 Monkey on your computer. Select your Spider Valve MKII as the connected device if it isn't automatically selected. Select the Flash Memory line item and click "Update Selection". Please also refer to the following FAQ for further update details: http://line6.com/support/page/articles/_/amplifiers/spider-ivspider-online/updating-the-spider-iv-75-120-150-150hd-us-r319 ***Please note: You MUST register your Spider Valve Mk II amp, and the FBV MkII Express or FBV Shortboard MkII in order to proceed with the update. Updating Note: Updating firmware does not erase User Presets. To return the amp to its factory settings, which includes restoring original User Presets and Amp Model Defaults, press the "A" Channel button on power up, then press the "Presets" encoder.
-
How to use the XD-V70 V2.0 Firmware features
Line6Tony posted a article in Relay/XD-V Digital Wireless
V2.0 Firmware provides improved performance as well as upgraded features and/or compatibility to existing Line 6 XD-V70 systems and separates: XD-V70 Transmitters RF2 mode in addition to the original RF1 mode 14 channel capability in RF2 mode or 12 channel in RF1 mode. XD-V70 Receivers Ability to lock to RF1 or RF2 mode transmitters 14 channel capability in RF2 mode A new RF Scan capability which identifies RF1, RF2 transmitters as well as possible interference sources on Line 6 channels. Switching between RF1 and RF2 Mode The XD-V70 V2.0 Firmware utilizes our latest digital wireless transmission method, and is fully channel compatible with the XD-V75 running RF2 mode. Multiple units of either of these models can be used together within the same location, as long as each unit is on a unique channel and no more than 14 units are used simultaneously. The XD-V70 receivers running V2.0 Firmware can automatically receive transmissions from previous generation of Line 6 wireless products, including the XD-V30, XD-V70, and Relayâ„¢ G30, Relayâ„¢ G50, and Relayâ„¢ G90 models with pre Version 2.0 Firmware, now referred to as RF1 mode. However, it is recommended to NOT mix usage of the RF1 and RF2 modes within the same location due to the channel frequencies in each system not being compatible. Depending on the situation, it may be desirable to switch transmitters from RF2 back to RF1 mode. To set THH12 or TBP12 transmitters running V2.0 firmware into RF1 mode, enter Setup mode to display the current channel, then while holding down the SELECT button, press and release the ON/MUTE button on the THH12 or VALUE button on the TBP12. The display will briefly show [XD-V7x RF1] or [XD-V7x RF2] to indicate whether it is operating in the old or new mode, respectively. This setting is retained when powering off, so as a reminder the display will also show this indication [RF1 or RF2] each time power is turned on. The XD-V7x receiver will display a [To] on the far right of the display to indicate while communicating with a RF1 software transmitter. RF Scan Mode Channel Scanning Procedure V2.0 firmware adds a sophisticated scanning capability that can determine the existence of interfering wireless devices that may compromise the performance range of operation on certain channels, and can also help assure selected wireless mic channels do not interfere with other wireless devices. Use the following procedure to minimize interference: if you are adding new wireless units to a previous installation with Line 6 systems, first turn on the existing transmitters so their frequencies can be detected. Press the SETUP button on the receiver. The [sELECT FUNCTION] screen will appear; scroll with the ROTARY ENCODER to [CHANNEL SCAN], and press the ROTARY ENCODER to begin the scanning process. After approximately 6 seconds, the display will show channel numbers 1 through 14 on the bottom line, with a status indicator above each channel. The indicators and their applications are: Note: No audio will function while the receiver is on this channel-scanning page; you must select a channel by pressing the ROTARY ENCODER or press the EXIT button and leave the page to resume audio. Turn the ROTARY ENCODER to scroll through the list of channels; a flashing underline will follow the channel number as you scroll. Once you have highlighted a blank, unused channel, press the ROTARY ENCODER to select it. The receiver display will return to the main page with the new channel number shown. Note: Any of the channels can be selected, regardless of the RF conditions displayed for the channel. Selecting a channel showing significant RF interference can result in lessened range for the associated transmitter.
