Search the Community

Deutsch Français Workbench HD is the companion editor for the James Tyler Variax HD firmware update. The all-new Variax Workbench HD software lets you mix and match body styles, pickups, components and more to create unique instruments or revered classics. Thanks to a variety of customer-requested features, you have even more control when tweaking existing HD instruments or creating new ones from scratch. Think of it like your own personal custom shop for James Tyler Variax. Workbench HD is available as a download from the Line 6 Download page or the Line 6 Monkey update utility software. Workbench HD works with all James Tyler Variax guitars with Variax HD Flash Memory 2.0 or greater. The Variax Workbench HD installer and Variax Workbench HD software provide instructions for setting up your computer, Variax, and the included hardware and software. Please run the installer or the Variax Workbench HD software to view those instructions. You need to be connected to the Internet to perform this installation. ***The James Tyler Variax must be connected to your computer via the Workbench VDI to USB interface in order to use Workbench HD. Known issues: - Workbench HD does not support computer connections via POD HD devices. You must use the Workbench VDI to USB interface only. Variax Workbench HD: Versionshinweise: Workbench HD ist der Begleiteditor für das James Tyler Variax HD Frimware Update. Die vollkommen neue Variax Workbench HD Software erlaubt Ihnen das Mischen und Anpassen von Body Styles, Pickups, Components und mehr um einzigartige Instrumente oder verehrten Klassiker zu erstellen. Dank der Vielfalt an neuen, von Benutzern gewünschten Eigenschaften haben Sie sogar noch mehr Kontrolle beim optimieren von bereits existierenden oder entwerfen neuer HD Instrumenten. Sehen Sie es als Ihren eigenen kleinen Custom Shop für James Tyler Variax. Workbench HD ist erhältlich als Download von der Line 6 Download-Seite oder per Line 6 Monkey. Workbench HD funktionniert mit allen JTV Gitarren mit Variax HD Flash Memory 2.0 oder neuer. Das Variax Workbench HD Installationsprogramm und dies isntalleirte Software an sich bieten Anweisungen dazu, wie Sie Ihren Computer, die Gitarre und dazugehörige Hardware und Software konfigurieren müssen. Starten Sie einfach das Installationsprogramm um diese Informationen zu erhalten. Sie müssen eine Internetverbindung haben um die Installation durchführen zu können. Achtung, die JTV Gitarre muss an den Computer via Workbench VDI zu USB Schnittstelle angeschlossen sein damit Sie Workbench HD nutzen können. Bekannte Fehler: Workbench HD unterstützt keine Computerverbindungen via POD HD Geräte. Sie müssen die Workbench VDI zu USB Schnittstelle dazu benutzen. Variax Workbench HD: Notes de version: Workbench HD est l'éditeur compagnon pour la mise à jour du firmware James Tyler Variax HD. Le nouveau logiciel Variax Workbench HD vous permet de mélanger et assortir des Body Styles, Pickups, Components et plus pour créer des instruments uniques ou classiques révérés. Grâce à une variété de fonctionnalités demandées par les clients, vous avez encore plus de contrôle lorsque l'ajustement des instruments existants HD ou lorsque vous créez des nouveaux. Pensez-y comme votre propre boutique personnelle James Tyler Variax. Workbench HD est disponible comme téléchargement sur le site web des téléchargements de Line 6 ou via le logiciel Line 6 Monkey. Workbench HD fonctionne avec tous les guitares James Tyler Variax avec Flash Memory 2.0 ou plus nouveau. Le programme d'installation de Variax Workbench HD et le logiciel Variax Workbench HD fournissent des instructions concernant le setup de votre ordinateur, la Variax et le logiciel et hardware inclus. Démarrez le programme d'installation du Workbench HD pour voir ces instructions. Vous devez être connecté à l'internet pour effectuer l'installation. Attention, la guitare James Tyler Variax doit être connectée à l'ordinateur via l'interface Workbench VDI à USB pour utiliser Workbench HD. Problèmes connus: Workbench HD ne soutien pas les connexions ordinateurs via appareils POD HD. Vous devez utiliser l'interface Workbench VDI à USB uniquement.

For JTV-89 Customers Only: In addition to the 28 electric, acoustic and electric instruments, you also get five high-gain models exclusive to the JTV-89 guitars based on the high output magnetic pickups loaded into the Custom 1 Bank. Each model is based on a different pickup position, and delivers high-gain guitar tone while allowing you to access drop tunings, custom Dream Rig configurations and more. Because of this, you will NOT be able to modify or save your own custom settings to the Custom 1 Bank on the JTV-89 and 89F guitars. Deutsch: JTV-89 und 89F Custom 1 Bank mit v1.90 und neuerer Firmware. Nur für JTV-89 Nutzer: Zusätzlich zu den 28 elektrischen und akustischen Instrumenten bekommen Sie 5 High-Gain Modelle, die für JTV-89 Gitarren exklusiv sind. Diese sind basierend auf der hohen Ausgabe der magnetischen Pickups in der Custom 1 Bank. Jedes Modell ist basiert auf einer anderen Pickup Position und liefert einen High-Gain Gitarrenklang während Sie gleichzeitig auf Drop Tuning, die Dream Rig Einstellungen und mehr zugreifen können. Daher können sie Ihre eigenen Einstellungen und Änderungen nicht auf der Custom 1 Bank der JTV-89 und 89F Gitarren abspeichern. Français: JTV-89 et 89F Custom 1 Bank avec v1.90 et firmware plus recente. Seulement pour les utilisateurs de la JTV-89: En plus des 28 instruments électriques et acoustiques, vous obtenez 5 modèles à gain élevé qui sont exclusives pour les guitares JTV-89. Ces modèles sont basés sur les micros magnétiques de la Bank Custom 1. Chaque modèle est basé sur une autre position du micro et fournisse un ton de guitare High-Gain pendant que vous pouvez accéder Drop Tuning, les réglages Dream Rig et plus. Donc vous ne pouvez pas enregistrer vos réglages et changements sur la Bank Custom 1 des guitares JTV-89 et 89F.

Deutsch Français StageScape Firmware v1.10 IMPORTANT NOTICE: This version of the StageScape firmware works only with StageScape remote app v1.10. Please update your StageScape remote app on your iPad when updating your StageScape firmware. When updating firmware, have ONLY the SD card or USB drive that is being used to install the update plugged into the StageScape. This update is available from this web address http://line6.com/software/index.html. Be sure to select StageScape M20d under All Products, click the red Go button, and you will be able to download the Firmware 1.10 update. You will have to download this file and save it to a SD card or USB thumb drive. Insert that device into your StageScape M20d, go to the i menu, Show System Settings, Update M20d, Update System Firmware. The update file will have to be in the top hierarchy of your media device. Firmware install files will not be recognized if they are placed in a folder. Be sure to unplug any other media device (USB, SD card or PC) from your StageScape that is not being used for the firmware update. New Features New recording features, including marker functions (create, list and seek to marker) and fast forward/reverse 10 seconds at a time. Join an existing wireless network. Stereo Monitoring Fixed Issues: Status of the phantom power of channel 7- 12 was not saved with setups on previous firmware version. An audio "clicking" artifact in the chorus effect has been removed. Other minor bug fixes. Informationen zum StageScape M20d Firmware Update 1.10 StageScape Firmware v1.10 ACHTUNG, WICHTIG: Diese Version der StageScape Firmware funktioniert ausschließlich mit der StageScape remote app v1.10. Bitte aktualisieren Sie Ihre StageScape remote app auf Ihrem iPad wenn Sie die StageScape Firmware aktualisieren wollen. Wenn Sie Firmware aktualisieren entfernen Sie jegliche Geräte von Ihrem StageScape und lassen Sie nur die SD Karte oder den USB Stick im StageScape, den Sie brauchen um die Firmware zu aktualisieren. Dieses Update können Sie auf der folgenden Webseite herunterladen: http://de.line6.com/software/index.html Wählen Sie im "All Products" Menu StageScape M20d aus und klicken Sie auf den "Go" Knopf dann können Sie die 1.10 Firmware herunterladen. Laden Sie sich die Datei herunter und speichern Sie diese auf eine SD Karte oder einen USB Stick. Stecken Sie das Gerät in Ihren StageScape M20d, gehen Sie in das "i" Menu -> Show System Settings -> Update M20d -> Update System Firmware Die Datei zur Aktualisierung, muss im Stammverzeichnis des USB Sticks/SD Karte sein. Installationsdateien für die Firmware werden nicht erkannt wenn diese in einem Ordner sind. Entfernen Sie alle anderen Geräte, Ihren PC oder SD Karten vom StageScape, die nicht zum Update benötigt werden. Neue Aufnahmemöglichkeiten: Marker Funktionen (erstellen, auflisten und suchen nach Markern) und 10 Sekunden Vorspulen oder Zurückspulen pro Klick. Einem bestehenden kabellosen Netzwerk beitreten. Stereo Monitoring Behobene Probleme: Der Status der Phantomspeisung für die Kanäle 7 bis 12 wurde nicht abgespeichert auf vorherigen Firmware Versionen. Ein "Klick" Artefakt im Chorus Effekt wurde entfernt. Andere kleinere Fehlerbehebungen. StageScape M20d: Informations concernant la mise à jour 1.10 de la firmware StageScape Firmware v1.10 REMARQUE IMPORTANTE: Cette version de la firmware StageScape fonctionne exclusivement avec la version 1.10 de la StageScape remote app. Veuillez mettre à jours votre StageScape remote app sur votre iPad si vous voulez mettre votre firmware StageScape à jours. Si vous actualisez votre firmware, détachez tous sauf la carte SD ou clé USB que vous avez besoin pour installer la mise à jour. Cette mise à jour est disponible sur ce site web: http://line6.com/software/index.html. Choisissez StageScape M20d dans la catégorie "All Products", cliquez le bouton rouge "Go" et vous pouvez télécharger la mise à jour 1.10 de la firmware. Téléchargez ce fichier et enregistrez-le sur un disque amovible. (Carte SD ou clé USB) Insérez ce périphérique dans votre StageScape M20d, allez dans le Menu "i" -> "Show System Settings" -> "Update M20d" -> "Update Firmware". Le fichier doit être dans le dossier racine de votre clé USB/carte SD. (Le fichier ne peut pas être dans un sous-dossier.) L'appareil ne reconnait pas le fichier s'il est dans un dossier. Détachez tous les autres appareils media (PC, clé USB, carte SD) de votre StageScape que vous n'avez pas besoin pour cette mise à jour. Nouvelles fonctions d'enregistrement. Des fonctions marqueurs (créer, inscrire et chercher à marqueur) et avance ou retour rapide de 10 secondes par clic. Joindre un réseau sans fil. Monitoring stéréo. Problèmes résolus: L'état d'alimentation fantôme sur les canaux 7 à 12 n'enregistrait pas sur les versions précédentes de la firmware. Un artefact "clic" a été enlevé dans l'effet chorus. Autres corrections des bugs mineurs.

Update Instructions: All Spider Valve Mk II 112, 212 and HD100 amplifiers can be updated using an FBV MkII Express, FBV MkII Shortboard, or via MIDI with a USB to MIDI interface as follows: Connect your FBV MkII to your Spider Valve MKII using a standard FBV cable. Connect your FBV MkII to your computer using a standard USB cable. Launch Line 6 Monkey on your computer. Select your Spider Valve MKII as the connected device if it isn't automatically selected. Select the Flash Memory line item and click "Update Selection". Please also refer to the following FAQ for further update details: http://line6.com/support/page/articles/_/amplifiers/spider-ivspider-online/updating-the-spider-iv-75-120-150-150hd-us-r319 ***Please note: You MUST register your Spider Valve Mk II amp, and the FBV MkII Express or FBV Shortboard MkII in order to proceed with the update. Updating Note: Updating firmware does not erase User Presets. To return the amp to its factory settings, which includes restoring original User Presets and Amp Model Defaults, press the "A" Channel button on power up, then press the "Presets" encoder.

V2.0 Firmware provides improved performance as well as upgraded features and/or compatibility to existing Line 6 XD-V70 systems and separates: XD-V70 Transmitters RF2 mode in addition to the original RF1 mode 14 channel capability in RF2 mode or 12 channel in RF1 mode. XD-V70 Receivers Ability to lock to RF1 or RF2 mode transmitters 14 channel capability in RF2 mode A new RF Scan capability which identifies RF1, RF2 transmitters as well as possible interference sources on Line 6 channels. Switching between RF1 and RF2 Mode The XD-V70 V2.0 Firmware utilizes our latest digital wireless transmission method, and is fully channel compatible with the XD-V75 running RF2 mode. Multiple units of either of these models can be used together within the same location, as long as each unit is on a unique channel and no more than 14 units are used simultaneously. The XD-V70 receivers running V2.0 Firmware can automatically receive transmissions from previous generation of Line 6 wireless products, including the XD-V30, XD-V70, and Relayâ„¢ G30, Relayâ„¢ G50, and Relayâ„¢ G90 models with pre Version 2.0 Firmware, now referred to as RF1 mode. However, it is recommended to NOT mix usage of the RF1 and RF2 modes within the same location due to the channel frequencies in each system not being compatible. Depending on the situation, it may be desirable to switch transmitters from RF2 back to RF1 mode. To set THH12 or TBP12 transmitters running V2.0 firmware into RF1 mode, enter Setup mode to display the current channel, then while holding down the SELECT button, press and release the ON/MUTE button on the THH12 or VALUE button on the TBP12. The display will briefly show [XD-V7x RF1] or [XD-V7x RF2] to indicate whether it is operating in the old or new mode, respectively. This setting is retained when powering off, so as a reminder the display will also show this indication [RF1 or RF2] each time power is turned on. The XD-V7x receiver will display a [To] on the far right of the display to indicate while communicating with a RF1 software transmitter. RF Scan Mode Channel Scanning Procedure V2.0 firmware adds a sophisticated scanning capability that can determine the existence of interfering wireless devices that may compromise the performance range of operation on certain channels, and can also help assure selected wireless mic channels do not interfere with other wireless devices. Use the following procedure to minimize interference: if you are adding new wireless units to a previous installation with Line 6 systems, first turn on the existing transmitters so their frequencies can be detected. Press the SETUP button on the receiver. The [sELECT FUNCTION] screen will appear; scroll with the ROTARY ENCODER to [CHANNEL SCAN], and press the ROTARY ENCODER to begin the scanning process. After approximately 6 seconds, the display will show channel numbers 1 through 14 on the bottom line, with a status indicator above each channel. The indicators and their applications are: Note: No audio will function while the receiver is on this channel-scanning page; you must select a channel by pressing the ROTARY ENCODER or press the EXIT button and leave the page to resume audio. Turn the ROTARY ENCODER to scroll through the list of channels; a flashing underline will follow the channel number as you scroll. Once you have highlighted a blank, unused channel, press the ROTARY ENCODER to select it. The receiver display will return to the main page with the new channel number shown. Note: Any of the channels can be selected, regardless of the RF conditions displayed for the channel. Selecting a channel showing significant RF interference can result in lessened range for the associated transmitter.

The XD-V75 receiver firmware can be updated via the mini-USB port connection to a host computer (Windows XP or better, or Mac OSX 10.5 or better) using the Line 6 Monkey software application. In addition, the XD-V75 receiver can function as an "interface" to update the Relay G90 and XD-V70 receivers. Updating an XD-V75 Receiver: Remove any currently connected Antennas from the BNC jacks. Power Switch to "Off" on the receiver, then disconnect the power cable to the XD-V75 Receiver. Connect a mini-USB cable to the back of the receiver mini-USB port and your host computer. Reconnect the power cable to the XD-V75 Receiver. LCD Display on the XD-V75 receiver should read: "LOADER ENABLED" (regardless if you physically flip the Power Switch to "On" or not). Launch Line 6 Monkey 1.50 (or higher, depending on current release build as of this reading). Be certain to log on in Monkey. Click on "Connect To Device" on the left. Choose "Line 6 Wireless Device USB" and click OK. In the following window, select "XD-V75 Receiver" in the list of all the wireless devices that appear. Click on the "Flash Memory" in the Update window. Click "Update Selection" or "Reinstall Latest", whichever appears. Click "I ACCEPT" and then "Yes". Don't break the USB connection during the update process. When completed you should see a "XD-V75 Receiver update successful" message. Click "OK". To get the receiver out of Loader Mode, unplug the unit, remove the USB cable, plug in the power and turn the unit on. Updating the G90 or XD-V70 Receivers: Look at the pictures in the Device Positioning for Updating XD-V7x Transmitters and Receivers document for the visual reference on how the devices must be positioned/connected physically for a successful update. Once the device to be updated is positioned/connected, follow steps 3-5 above to put the XD-V75 Receiver into Loader Mode. Click the Change Device button in Line 6 Monkey. Choose "Line 6 Wireless Device USB" and click OK. On the next screen, choose the appropriate device to update. Once Monkey switches to the new target device to be updated, follow along in the update wizard instructions in the Line 6 Monkey software window. Monkey will program the XD-V75 receiver to "connect" to the device to be updated. If you do not power up the target device when prompted within about 30 seconds, the connection will time out and give you the error message "No pass thru receiver found". After you click OK, you'll get an error message saying "Error connecting to device". Hit OK and Monkey will reprogram the XD-V75 again, then ask you to power up the target device. After powering up the device, Monkey will be ready to update it. Follow steps 8-10 above. When the update is complete, you will get a message saying so. You will also get instructions for verifying the version on the unit. To get the receiver out of Loader Mode, unplug the unit, remove the USB cable, plug in the power and turn the unit on. Having problems? Some users that were reporting errors had success when using a different computer and repeating the process. Try re-booting your computer and starting from the top by first re-flashing your V75 receiver. Once this is done you can proceed to flashing other units. If you are still having problems, create a support ticket from http://line6.com/support/tickets/. Please complete the System Profile in your account and send us a "Monkey Log" in the ticket: 1) Run Monkey until the error is encountered 2) Choose "Diagnostics..." from the Line 6 Monkey main menu (at the top of the Mac Finder) 3) A finder window will open up - you will see one or more .log files with date-stamped filenames. 4) Send the most recent log file - or any of the log files whose date correspond to the date when the error occurred.

Spider Valve MKII FX INFUSION v2.0 is a free firmware upgrade for your Spider Valve MKII 112, 212 and HD100. This new firmware features: A total of 56 FX Models, bringing the total in your updated amp to 76! (All the FX from Spider FX Infusion 1.52 plus 28 more Stomps, Comps, Mods, Delays, Reverbs and Wahs). Overdrives / Stomps Bronze Master (Maestro Bass Brassmaster) Dingo Tron (Mu-Tron III (down switch on) Facial Fuzz (Arbiter Fuzz Face) Classic Distortion (ProCo Rat) Tube Drive (Chandler Tube Driver) Compressors Blue Comp Treb (Boss CS-1 Compressor (treble switch off) Line 6 Comp (Teletronics LA-2A) Line 6 Vetta Comp EQ Line 6 Two band Parametric EQ Delay Echo Platter (Binson EchoRec) Line 6 Phaze Eko Tube Echo (EP-1 Tube Echoplex) Reverb Line 6 Brite Room Reverb Line 6 Cavernous Reverb Line 6 Dark Hall Line 6 Rich Chamber Line 6 Slap Plate Reverb Line 6 Standard Spring Reverb Mods Analog Square Chorus (Boss Square CE-1 Chorus w/ square wave) Line 6 Expo Chorus Line 6 POD Purple X Line 6 Random Sample and Hold Line 6 Square Flange Line 6 Tape Eater Wahs Chrome Custom Wah (Custom Vox V847 Wah) Conductor Wah (Maestro Boomerang Wah) Fassel Wah (Cry Baby Super - Jen Electronics) Throaty Wah (RMC Real McCoy 1 Wah) Continued compatibility (added with 1.50) with Spider Valve Edit. Update Instructions: All Spider IV 112, 212 and HD100 amplifiers can be updated using an FBV MkII Express, FBV MkII Shortboard, or via MIDI with a USB to MIDI interface as follows: Connect your FBV MkII to your Spider Valve MKII using a standard FBV cable. Connect your FBV MkII to your computer using a standard USB cable. Launch Line 6 Monkey on your computer. Select your Spider Valve MKII as the connected device if it isn't automatically selected. Select the Flash Memory line item and click "Update Selection". Please also refer to the following FAQ for further update details: http://line6.com/support/page/articles/_/amplifiers/spider-ivspider-online/updating-the-spider-iv-75-120-150-150hd-us-r319 (Register your FBV MkII Express or Shortboard if it isn't already registered, then proceed with the update) Updating Note: Updating firmware does not erase User Presets. To return the amp to its factory settings, which includes restoring original User Presets and Amp Model Defaults, press the "A" Channel button on power up, then press the "Presets" encoder. *If you have already registered your hardware, launch Line 6 Monkey to download the v2.00 update.

Français Deutsch SPIDER FX INFUSION v2.0 is a free firmware upgrade for your Spider IV 75, 120, 150 and HD 150. It requires the purchase and registration of either of the USB equipped FBV Shortboard MkII or FBV Express MkII foot-controllers to enable computer connectivity to the amp. This new firmware features: A total of 56 FX Models, bringing the total in your updated amp to 76! (All the FX from Spider FX Infusion 1.52 plus 28 more Stomps, Comps, Mods, Delays, Reverbs and Wahs). Overdrives / Stomps Bronze Master (Maestro Bass Brassmaster) Dingo Tron (Mu-Tron III (down switch on) Facial Fuzz (Arbiter Fuzz Face) Classic Distortion (ProCo Rat) Tube Drive (Chandler Tube Driver) Compressors Blue Comp Treb (Boss CS-1 Compressor (treble switch off) Line 6 Comp (Teletronics LA-2A) Line 6 Vetta Comp EQ Line 6 Two band Parametric EQ Delay Echo Platter (Binson EchoRec) Line 6 Phaze Eko Tube Echo (EP-1 Tube Echoplex) Reverb Line 6 Brite Room Reverb Line 6 Cavernous Reverb Line 6 Dark Hall Line 6 Rich Chamber Line 6 Slap Plate Reverb Line 6 Standard Spring Reverb Mods Analog Square Chorus (Boss Square CE-1 Chorus w/ square wave) Line 6 Expo Chorus Line 6 POD Purple X Line 6 Random Sample and Hold Line 6 Square Flange Line 6 Tape Eater Wahs Chrome Custom Wah (Custom Vox V847 Wah) Conductor Wah (Maestro Boomerang Wah) Fassel Wah (Cry Baby Super - Jen Electronics) Throaty Wah (RMC Real McCoy 1 Wah) Continued compatibility (added with 1.52) with Spider IV Edit. Update Instructions: All Spider IV 75, 120, 150 and 150HD amplifiers can be updated using an FBV MkII Express or FBV MkII Shortboard, as follows: Connect your FBV MkII to your Spider IV using a standard FBV cable. Connect your FBV MkII to your computer using a standard USB cable. Launch Line 6 Monkey on your computer. Select your Spider IV as the connected device if it isn't automatically selected. Select the Flash Memory line item and click "Update Selection". Please also refer to the following FAQ for further update details: http://line6.com/support/page/articles/_/amplifiers/spider-ivspider-online/updating-the-spider-iv-75-120-150-150hd-us-r319 (Register your FBV MkII Express or Shortboard if it isn't already registered, then proceed with the update) Updating Note: Updating firmware does not erase User Presets. To return the amp to its factory settings, which includes restoring original User Presets and Amp Model Defaults, press the "A" Channel button on power up, then press the "Presets" encoder. *If you have already registered your hardware, launch Line 6 Monkey to download the v2.00 update. La mise à jour Spider FX Infusion version 2 est une mise à jour firmware gratuite pour votre Spider IV 75, 120, 150 et HD 150. Vous avez besoin d’un FBV Shortboard MkII ou FBX Express MkII registré avec connexion USB pour le connecter à l’ordinateur. Nouvelles fonctionnalités : 56 modèles FX nouveaux. (Tous les modèles FX de la mise à jour 1.52 et 28 modèles complètement nouveaux Stomp, Comp, Mod, Delay, Reverb et Wah) Overdrives / Stomps Bronze Master (Maestro Bass Brassmaster) Dingo Tron (Mu-Tron III (down switch on) Facial Fuzz (Arbiter Fuzz Face) Classic Distortion (ProCo Rat) Tube Drive (Chandler Tube Driver) Compressors Blue Comp Treb (Boss CS-1 Compressor (treble switch off) Line 6 Comp (Teletronics LA-2A) Line 6 Vetta Comp EQ Line 6 Two band Parametric EQ Delay Echo Platter (Binson EchoRec) Line 6 Phaze Eko Tube Echo (EP-1 Tube Echoplex) Reverb Line 6 Brite Room Reverb Line 6 Cavernous Reverb Line 6 Dark Hall Line 6 Rich Chamber Line 6 Slap Plate Reverb Line 6 Standard Spring Reverb Mods Analog Square Chorus (Boss Square CE-1 Chorus w/ square wave) Line 6 Expo Chorus Line 6 POD Purple X Line 6 Random Sample and Hold Line 6 Square Flange Line 6 Tape Eater Wahs Chrome Custom Wah (Custom Vox V847 Wah) Conductor Wah (Maestro Boomerang Wah) Fassel Wah (Cry Baby Super - Jen Electronics) Throaty Wah (RMC Real McCoy 1 Wah) Instructions: Vous pouvez mettre à jour tous les amplis Spider IV 75, 120, 150 et 150HD avec un FBV Shortboard MkII ou un FBV Express MkII : Le FBV MkII doit être enregistré. Connectez le FBV MkII à l’ampli Spider IV avec un câble FBV standard. Connectez le FBV MkII à un ordinateur avec un câble USB standard. Lancez Line 6 Monkey sur l’oridnateur. Sélectez le Spider IV comme appareil connecté s’il n’est pas sélecté automatiquement. Sélectez Flash Memory et cliquez Update Selection. Pour plus de details utilisez cette foire aux questions: http://line6.com/support/page/articles/_/amplifiers/spider-ivspider-online/updating-the-spider-iv-75-120-150-150hd-us-r319#fr Attention, cette mise à jour n’effacera pas vos presets. Pour réinitialiser l’appareil (avec réinitialisation des presets, modèles amplis et configurations), cliquez le bouton canal « A » durant la mise sous tension et après, cliquez « Preset ». Si vous avez déjà registré le matériel, lancez Line 6 Monkey et effectuez la mise à jour. Das Spider FX Infusion V2.0 ist eine gratis Firmware Aktualisierung für Ihr Spider IV 75, 120, 150 und 150HD. Sie brauche nzur Installation entweder ein FBV Shortboard MkII oder ein FBV Express MkII mit USB Anschluss um dieses an den Computer anschließen zu können. Hinzugefügt mit der Aktualisierung: Insgesamt 56 FX Modelle, Sie haben also insgesamt 76 Modelle! (Das sind alle FX Modelle aus Patch 1.52 sowie 28 neue Stomp, Comp, Mod, Delay, Reverb und Wah Modelle). Overdrives / Stomps Bronze Master (Maestro Bass Brassmaster) Dingo Tron (Mu-Tron III (down switch on) Facial Fuzz (Arbiter Fuzz Face) Classic Distortion (ProCo Rat) Tube Drive (Chandler Tube Driver) Compressors Blue Comp Treb (Boss CS-1 Compressor (treble switch off) Line 6 Comp (Teletronics LA-2A) Line 6 Vetta Comp EQ Line 6 Two band Parametric EQ Delay Echo Platter (Binson EchoRec) Line 6 Phaze Eko Tube Echo (EP-1 Tube Echoplex) Reverb Line 6 Brite Room Reverb Line 6 Cavernous Reverb Line 6 Dark Hall Line 6 Rich Chamber Line 6 Slap Plate Reverb Line 6 Standard Spring Reverb Mods Analog Square Chorus (Boss Square CE-1 Chorus w/ square wave) Line 6 Expo Chorus Line 6 POD Purple X Line 6 Random Sample and Hold Line 6 Square Flange Line 6 Tape Eater Wahs Chrome Custom Wah (Custom Vox V847 Wah) Conductor Wah (Maestro Boomerang Wah) Fassel Wah (Cry Baby Super - Jen Electronics) Throaty Wah (RMC Real McCoy 1 Wah) Anweisungen zur Aktualisierung: Alle Spider IV 75, 120, 150 und HD150 Verstärker müssen per FBV MkII mit einem Computer verbunden sein: Verbinden Sie das FBV MkII mit dem Spider IV mit standart FBV Kabel. Verbinden Sie das FBV MkII mit dem Computer mit standart USB Kabel. Starten Sie Line 6 Monkey auf dem Computer. Wählen Sie den Spider IV als verbundenes Gerät auf falls dies nicht automatisch passiert ist. Wählen Sie Flash Memory aus und klicken Sie dann auf „Update Selection“. Falls Sie mehr Details benötigen, verwenden Sie bitte folgendes FAQ: http://line6.com/support/page/articles/_/amplifiers/spider-ivspider-online/updating-the-spider-iv-75-120-150-150hd-us-r319#de (Registrieren Sie Ihr FBV MkII falls es noch nicht registriert ist) Achtung, die Aktualisierung der Firmware löscht keine Presets. Um das Gerät vollständig zurückzusetzen (inklusive Presets und Verstärkermodelle) drücken Sie den A Kanal Knopf beim Start des Gerätes und dann Preset. Falls das Gerät bereits registriert ist brauchen Sie nur Line 6 Monkey zu starten und das Update herunterzuladen.

M9/M5 FIRMWARE UPDATE INSTRUCTIONS NEEDED: A MIDI interface that connects to your computer via USB (download the current Driver for it if you don't have it installed) 2 MIDI cables (or a MIDI interface such as the M-Audio Uno that comes with attached MIDI cables) NOTE: Line 6 recommends a name brand USB to MIDI interface produced by an audio company that supports/updates their drivers. Good choices include: M-Audio, Edirol, E-Mu and MOTU. These interfaces have proven to be more robust and reliable when it comes to large MIDI transfers such as the M9 and M13 update. For further infomation on MIDI connectivity and interfaces, please go over the following MIDI Document Line 6 Monkey 1.35 or higher installed. Download and install the Line 6 Monkey software here Procedure Connect your MIDI interface to your computer via USB cable. Connect the M9/M5 MIDI Out to your MIDI interface In, and connect the M9/M5 MIDI In to your MIDI interface Out. Launch the Line 6 Monkey 1.35 (or higher) with the M9/M5 connected via the MIDI interface and powered on. Select the Flash Memory line item and click the Update Selection button to install the flash memory update into the M9/M5. The device will receive the firmware data and the unit will be updated to the latest Firmware. It sometimes takes 30 seconds to 1 minute to appear like the unit is receiving the update and takes several minutes to complete. The M9/M5 will re-initialize when the update is complete.

Firmware v2.09 Release Notes: Eliminated slight delay when entering Record mode. Fixed problem with extended-ascii characters in file names. Fixed Undo issue for recordings loaded directly from SD-Card, where the last two overdubs would be erased instead of only the most recent one. v2.09 Firmware Update Instructions: After you download the v2.09 update to your computer, please click here for step by step instructions on how to install the update. (Instructions are for v2.07, but they are essentially the same for v2.09. Note: If you are updating from v2.07, you can skip Step 4 -- no need to power up your Spider Jam with the SD card inserted -- simply insert SD card with power on as described in Step 3, then proceed to Step 5). Note: SD Card must be no larger than 2 GB capacity! Spider Jam Advanced Guide: For in-depth info on features and functionality of the Spider Jam not included in the Pilot's Handbook, check out: Spider Jam Advanced Guide. WARNING: BACK UP YOUR FILES! The v2.09 update will erase all the internal recordings you have made. If you want to save them, use an SD card to create backups (via the TRANSFER ALL TO CARD command) then copy them from your SD card onto your PC for safe keeping (using an SD card reader). You can then reload your files using an SD card at any time after you have completed the update. The v2.09 update will erase all the custom guitar presets you have made. Here are the instructions on Saving and Loading the presets to and from the Spider Jam: STORING PRESETS Created a User Tone and Saved it to a user location. In the SETTINGS/TONE menu, please make sure RECORDINGS SET TONE is set to ON. Made a recording with that guitar tone and save the recording to the internal memory. Do this for every preset you would like to store. In the SAVE menu, select the TRANSFER ALL TO CARD option. All of your recordings and their associated tone will be saved to the SD card. [*]LOADING PRESETS To transfer them back into the amp, go to the SAVE menu and choose the TRANSFER ALL FROM CARD option. This will load the recordings and the associated presets back onto the Spider Jam. Now, when you load a recording that was transferred onto the Spider Jam from the SD Card, the preset that was stored with the recording will be loaded with the recording. It will show in the SETTINGS/TONE menu with an asterisk (*) next to the name. To store this preset back into the Spider Jam User presets, go to the SAVE menu and select SAVE GUITAR TONE to store the preset in the User location you desire. Note: If you are updating from v1.04, you should back up your recordings by connecting a recording device to your Spider Jam RCA Outputs/JM4 Stereo Line Out (tape or hard disk recorder, computer sound card, etc.) then record them as you would any other recorded material in real time. (Tip: Record them in WAV format at 44.1, 16 bit mono; that way you can reload them into your Spider Jam later). Instructions for updating (also attached): 1. If you haven't done so already, download the latest firmware to your computer desktop from the Line 6 website (log in with your Line 6 User Name) here: Spider Jam 2.09 Firmware. The downloaded file will be named "fw.bin", with no number. Please save this to your desktop to easily find the file once the file has been downloaded. Note: You will need to delete any previous Spider Jam updates from your desktop prior to saving the Spider Jam 2.09 firmware, as the both devices will not recognize any firmware with an extension or name alterations. 2. Copy the downloaded fw.bin file to a blank SD card via an SD card reader. When the copy is complete, put the downloaded fw.bin file in a safe place on your PC for future reference -- for example, put it in a new folder labeled 'Spider Jam Flash', noting the version number. 3. Insert your SD card into the Spider Jam SD card slot. Note: Spider Jam owners running v1.04 should press and hold the SAVE button while powering up the Spider Jam (release SAVE after Spider Jam powers up from the SD card). 4. Press the SAVE button to display the menu items in the LCD if they aren't already displayed. 5. Turn the wheel and navigate to FIRMWARE UPGRADE at the bottom of the menu list then press Right Arrow to display the upgrade screen. 6. Press Up Arrow for YES to proceed with the update -- the Spider Jam or JM4 Looper will update itself from the SD Card. When the update is complete, the Spider Jam will power cycle itself. Note: Do not turn off power in the middle of the update! 7. Verify the update was successful by previewing a few Songs and Drum tracks (scroll thru the list; each track will play for a few seconds when you select it). 8. After verifying the update was successful, press the SAVE button again to display the menu list. 9. Turn the wheel and navigate to FORMAT CARD then press Right Arrow to display the format screen. 10. Press Up Arrow for YES and the Spider Jam/JM4 Looper will format the SD Card, preparing it for normal operation. 11. When formatting is complete, you're all set. If you ever want to reinstall your firmware, go back to your computer and copy the 'fw.bin' file to your SD Card, then repeat the above steps from Step 2. 12. If you want to load your backed up .WAV files into your Spider Jam again, simply copy them from your computer into the "LINE6" folder on your SD card using your SD card reader, then load them into your Spider Jam using the IMPORT WAV FILE FROM CARD command (consult the Spider Jam Advanced Guide for info on the option of viewing and loading your files via the SD Recordings Browser). If there is no LINE6 folder on the SD Card root directory, please create one. Format Alert: If your SD Card is rejected by the Spider Jam as not being FAT16, you should format your card and start over. See Format Instructions below. (Also attached) Mac OSX: Format SD Card to FAT16 1. Insert card into Mac via SD card reader 2. Name it UNTITLED (Double click on the icon on your desktop to open the drive>Right Click or CTRL Click on the Drive title and select the Rename option) 3. Open Terminal (via Applications/Utilities) 4. Copy and paste the following in the Terminal window exactly as written here and press Enter on your keyboard. diskutil partitionDisk /Volumes/UNTITLED 1 MBRFormat "MS-DOS FAT16" "UNTITLED" 100% 5. The SD Card will be formatted to FAT16 6. To confirm, open Disk Utility app (via Applications/Utilities) 7. Select your SD card icon to the left in the Disk Utility window 8. Look at the text info in the lower part of the window; it should look like this (the information displayed below is for a 1GB SD Card so your capacity read out will look different if you are using a 2GB card): Mount Point: /Volumes/UNTITLED Capacity: 952.4 MB (998,710,272 Bytes) Format: MS-DOS (FAT16) Available: 951.4 MB (997,638,144 Bytes) Owners Enabled: No Used: 784 KB (802,816 Bytes) Number of Folders: 0 PC: (XP/Vista/7) Format SD Card to FAT16 1. Start Windows Explorer 2. Click on My Computer 3. Select/Highlight The SD-Card Reader/Drive that contains the SD-Card 4. Right Mouse Click and select Format from the pop-up menu 5. Make certain the File System displays: FAT (Default) and not FAT 32 6. File Allocation Unit Size = Default 7. Press Start to begin Format (follow on-screen instructions) Note: On WinXP system there are only the options for formatting FAT and FAT 32 On Vista system there are the options for: FAT, FAT 32, NTFS, and exFAT

Q: Can I reset the POD X3 series units directly from the unit? A: Yes. Hold the "home" button for two seconds, then highlight "reset user presets" navigating with the 4-way arrow key. Press save, then hold the save button for five seconds and release. Be aware that this will replace ALL user presets back to factory settings, so please back up your custom presets using Gearbox or Monkey if you want to save them for future use. Q: How do I reflash my POD X3 unit? A: Download and install the latest version of Line 6 Monkey from the following link: www.line6.com/software Run the Line 6 Monkey program and log into Line 6 Monkey using your Line 6 user name and password. If this is the first time you have run Line 6 Monkey, you will not have driver software installed. Highlight the "Driver" item in the Updates window, and click the Update button on the right. Monkey will lead you through the installation process, which requires you to quit Monkey and possibly restart your machine. See the following link for more information on driver installation: USB Driver Installation Make sure your POD X3 unit is powered on and connected to your computer via a USB 2.0 connection. Monkey should automatically recognize your POD X3 and complete the startup sequence. See the following link for USB troubleshooting tips if Line 6 Monkey does not recognize your POD X3 unit. USB Audio Troubleshooting On the Updates tab, look to see if your Flash Memory is up to date. If it is out of date, you will see a yellow "yield" sign next to flash memory. If you need to update (or just want to reset the unit back to factory state for troubleshooting) select "Flash Memory" (it will highlight in blue) and click the "Update Selection/Reinstall Latest" button to the right. Monkey will lead you through the process. Monkey will give you an option to continue: Monkey will then ask if you want to keep your presets. If you do not want to keep the presets (or have already backed up your presets), select "no". Monkey will now update your unit after you select "yes". Be sure to close all other applications and heed the warnings. You will see the progress bar writing the flash to your unit Restart your POD X3 unit by powering the unit off, then back on. When the update is complete you will receive this message. ***NOTE: If a Variax guitar is connected to the POD HD500 via VDI connection during the flash memory update for the POD, DO NOT DISCONNECT the Variax guitar from the POD until the update process is completed: Q: How do I update the firmware on my POD X3 series unit? A:On the Updates tab, look to see if your USB Firmware is up to date. If you need to update, highlight "Device Firmware" and click the "Update" button to the right. Monkey will lead you through the firmware update process as shown above. Q: How do I reflash in "safe mode"? A: Safe mode can be used when a unit cannot be reflashed using the normal reflash procedure. Hold the four-way arrow key to the right while powering the POD X3 unit on to start your unit in safe mode. You can then reflash the unit as decribed above.

Q: Can I reset the PODxt series units directly from the unit? A: No, you must re-install the flash memory on the PODxt device to reset the unit back to factory settings. Q: How do I reflash my PODxt unit? 1. Download and install the latest version of Line 6 Monkey from the following link: www.line6.com/software 2. Run the Line 6 Monkey program and log into Line 6 Monkey using your Line 6 user name and password. If this is the first time you have run Line 6 Monkey, you will not have driver software installed. Highlight the "Driver" item in the Updates window, and click the Update button on the right. Monkey will lead you through the installation process, which requires you to quit Monkey and possibly restart your machine. See the following link for more information on driver installation. 3: Make sure your PODxt unit is powered on and connected to your computer via a USB 2.0 connection. Monkey should automatically recognize your PODxt and complete the startup sequence. See the following link for USB troubleshooting tips if Line 6 Monkey does not recognize your PODxt unit. 4. On the Updates tab, look to see if your Flash Memory is up to date. If it is out of date, you will see a yellow "yield" sign next to flash memory. If you need to update (or just want to reset the unit back to factory state for troubleshooting) select "Flash Memory" (it will highlight in blue) and click the "Update Selection/Reinstall Latest" button to the right. Monkey will lead you through the process. Monkey will give you an option to continue: Monkey will then ask if you want to keep your presets. If you do not want to keep the presets (or have already backed up your presets), select "no". Monkey will now update your unit after you select "yes". Be sure to close all other applications and heed the warnings. You will see the progress bar writing the flash to your unit Restart your POD XT unit by powering the unit off, then back on. When the update is complete you will receive a message stating it installed sucessfully. Check out our Walkthrough Video: ***NOTE: If a Variax guitar is connected to the PODxt via VDI connection during the flash memory update for the POD, DO NOT DISCONNECT the Variax guitar from the POD until the update process is completed: Q: How do I reflash in "safe mode"? A: Safe mode can be used when a unit cannot be reflashed using the normal reflash procedure. Hold the first of the four black soft buttons under the main LCD screen as you power on the PODxt. Then, follow the instructions above on how to re-install the flash memory.