Search the Community
Showing results for tags 'firmware'.
-
Hey all, I don't know about you guys, but I'm so tired of checking for the 2.8 upgrade, and seeing it's not there yet. Ever since I got the HX Stomp to compliment my Helix, I've been changing all my presets to work with both units. I use them both, sometimes when I want to use my Variax I bring the big one with me, if not, I bring the small, they are both great. I can't wait for sharing patches to be easy. I want to be able to tweak my presets on either device, and easily upload those changes to the other. I don't get why Line 6 announced this upgrade so many months ago - it's unnerving...
-
Hello, bought a brand new HX Stomp. It won't connect to my pc (Windows 7 x64). Problems found: - USB Audio Device has a driver problem. - HX Stomp doesn't have a driver. Are the driver available for download somewhere? None of the software provided, in the Downloads section of Line6's webpage, are able to "see" my HX Stomp.
-
Hello everybody, Another thread about these problems. I know there already are a lot, but none of them helped me. I bought a used HD500 with an dead USB port (i changed it, i work in electronics) and the famous boot loop problem on Line6 welcome screen. I would like to reinstall the device's firmware. First, Monkey (last version) won't install the drivers (the wizard does the work, the files are where they are supposed to be, but when i reopen Monkey, it still displays that driver aren't updated, even when i do it manually). Is it linked with the fact that the device was never recognized by my computer? (Win 10, Lenovo laptop, USB 3.0 may be another source of problem?). It never appeared in Windows Device Manager. Edit : i disabled USB 3.0 in my bios, so they work as USB 2.0 ports, no result. (but may work for other issues) I've tried to reset with left arrow, nothing, reset with down arrow effectively opens update mode, but still nothing, reset with right arrow, nothing. USB cable is OK. Do you know a way to check if device's USB chip is OK ? Thank you in advance.
-
Hi DT User, I'm using DT25 HD with the Line 6 1*12 cabinet. Firmware update 2.0 installed and changed some pre amp models. Position IV set to "none". On Ch A to Class A/B and Pentode and on the Lead Channel B to tube Boost, Class A and Pentode. Nice dynamic tube tones are the result. unfortunetly als knobs execpt Presence and Reverb are out of function. Only the Master allows Volumecontrol. To solve this problem I put a tube mic preamp with gain and output knobs in front of the amp. In this combination I get a wide range of tones from clean to overdriven. So my suggestion and question: Why Line 6 don't offers a simple pre amp model with full knob control and tube boost without any modelling? Only the tube and some controls. Is a firmware update planned? Please include a simple pre amp! best regards big34
-
I successfully installed and ran the Line 6 updater but it could not find a more updated firmware version form my Relay G10 than version 1.00 though I know new versions exist from reading the forums. I noticed that the updater will allow me to specify a file location. Where can I download version 1.04 (or later) for installation?
-
Hello, in a recent firmware update for the spider V, a new option was added to the "Global Settings", that gives you the ability to use the phones output as a line output - independent of the internal speaker and the master volume knob. The spider V has also an AUX input jack, which doesn't go through the effects, but goes right into the speaker. In both output modes (line/phones) the aux input still goes into the output jack. It would be really good, if the AUX input could be routed only to the speaker and not to the output jack by another option in the "Global Settings". Could this be implemented through a firmware update? Is there any possibility Line 6 could release such a firmware update? Thanks for your time, Greenscreener -
Hi all, Just did the firmware update on my helix LT (2.70) and It now seems to have a stability issue when using Helix as an audio interface. Every half hour or so, the usb seems to disconnect for about a second or so and switchs back to the inboard sound card of the PC. It then reconnects as quickly as it has quit and works fine for another half hour approx. I was wondering if anyone had had this problem too? Helix is the only device connected via USB and if I don't use it as an interface (say I only use the midi over usb fuction) It works fine... I don't reject the PC being a possible cause for this problem but it didn't behave that way prior to update... Thanks
-
So, I´ve seen plenty of posts here of people having a "dead helix" after trying to update it, so I guess it just was my turn. I recently realized that I´ve never updated the firmware in my helix, and was gona do that. In the updating process I suddenly just got an error in the line 6 updater, telling me to restart the helix and try again. But it doesnt seem like anything helps. The helix is just flashing on the led screen between the helix logo, and the helix rack logo, for some reason. I have a Helix floor so thats kind of weird. I did go through the checklist that is provided in the line 6 updater as well. After searching through forums on the internet, i´m apparently not the only one who has had this problem. I tried all the hotkey commands on start up, while holding down buttons, and none of them seem to help either. Only when i try to start it up in safe mode, the screen is not flashing, and there is no logo there. Anyway, would love to get some help.
-
I don't spend too much time on the forums so I'm not exactly sure where people go to share things like 'wish lists' for possible added fx models in future firmware updates.....so I thought I'd add one here! I just watched a presenter demo the Mobius (from Strymon) and I LOVED the 'Destroyer' setting!! It lets you tear apart the regular, pristine signal at your selected bit rate, also lets you dial in or out some 'crackle', and then you've got a tone that sounds exactly like it's coming out of an old vinyl record player!!! I don't know why but lately I've been digging all those lo-fi type effects for some reason. I love the contrast they can give to all the great, clear tones you can get out of the Helix....doing something like that can really wake the audience up! Of course, I'm fairly new to the Helix so maybe there's already something in there like that so maybe someone can point me in the right direction, but if not, that might be a cool model to add in a future firmware update. Keep up the great work Line 6!!!!
-
I am trying to update my JTV 89 F using my Helix as the interface through line 6 monkey. I have both the line 6 cable and the quarter inch jack connected to the guitar. Every time I try to update the firmware from 2.21 to 2.23 I am getting the following 2 errors (screenshot attached). Can anyone help on how I can get over this issue? ryi -
Hoping someone can assist on this. I tried updating the firmware on my Amplifi 30 the other day. It appeared to succeed but afterwards, the amp now emits a loud screeching hum which cannot be controlled by the volume, and with no instrument plugged in. Any controls on the app does not affect the sound. Scrolling the tone bank does not affect the sound. Nothing affects the sound - except when I plug in a headphone to cut the speaker output. But then it is in the headphone! Has this thing been bricked? Anyone else have this type of problem? Thanks in advance. Pcho73
-
Requesting for earlier Pocked Pod 1.0 firmware ppf file. Can't revert back to it and download section doesn't have it.
-
MacBook Pro (Retina, 15-inch, Mid 2015) Processor: 2.5 GHz Intel Core i7 Memory: 16GB 1600 MHz DDR3 OS X HighSierra 10.13.5 TonePort KB37 Driver 7.6.7 Flash Memory 1.03 Line6 Monkey 1.77 Since my KB37 doesn't send midi data like modulation wheel or stop, play, record... etc. I tried to re-install flash memory of 1.03 many times but doesn't work. And shows this message: ----- Update failed. (Code 80007204) Hardware device failed to enter update mode. ----- Plz give me a solution. Thanks.
-
I just received my amplifi 75. Tried updating over bluetooth and update failed. But I cannot factory reset the amplifier, I powered down the amp, pressed down the Master volume button and tone button. Nothing happened. I powered it down again and did the same thing for a minute nothing happened. I even kept pressing them for 5 minutes and nothing happened! Is there a way around this is there something wrong I'm doing??
-
Updating Your Handheld Microphone THH12 Updating Your Handheld Microphone THH06 -
Hi Everyone..been awhile since I posted ...here is SuMo (supermassivemomentum) newest live session. Recorded live over the internet from remote locations, Mastered at 96k. Experimental progressive improvisation, lots of guitar and bass craziness..heavy, grooving.. I use HELIX (2.54) and Variax.....powerful ! have a listen! Comments welcome https://hearthis.at/joejeffries/sumo-2018-5-11/
-
So is it officially done as far as development goes? Are we stuck with a compressor after all drive/amp blocks? Are we stuck with completely disabling iTunes in the app if we don't want to have the first track blast out of our headphones when we start up the app? are we stuck having to log into the App every other time we open it? this thing is soooooo close to being a worthy live backup device, but as of right now its pretty much only good for home jamming (which it is very good for), but it seems a few minor tweaks could really improve things.
-
OR do you think they are saving the goodies for one giant update around NAMM? I know some get grilled for asking questions like these, but it's been almost 3 months sine the last update. So I think it's a fair curiosity. I personally would like to see, more than anything, some signal metering input/output & at least a clip indicator on each block in the chain. That is definitely my number 1! Plenty of Ideascale submissions on this. Next in the list would be the expansion of HX reverbs. I think the last update fixed the mono versions wet not being wet enough issue. But I am not sure on that, as I am still on 2.50. I would also love to see more parameters in the HX cabs. Specifically off axis mic positioning. That would be really cool. As far as Amps, I would say the XTC, and more Engl. Other than that I would want more Line6 originals. I realize that the next update will not include all of this. Though hopefully some of this will be, especially my #1. What do you guys think? What would you like to see?
-
Hello I'm new in POD forum and I have some doubts about POD 2.0 software and connections. I have POD 2.0 I d' like to ask to to know what are the firmware version (attached photo). If the its the old one have any archive I can found the newest, ans for update the firmware it is by MIDI ports with interface. For connect the POD into PC I need a MIDI -USB interface right?! Thanks
-
Hello All!, first session of 2018! Using Variax and Helix listen to SuMo *(SuperMassiveMomentum) perform live over the internet from California, Colorado and Canada ..all in real time!. SuMo is three veteran musicians playing unscripted improvised progressive music...heavy, grooving, shredding...its all here!. Listen the the master at 96k!. Comments welcome. Tech: I used some of the new reverb's in this recording (spotlight my favorite) Follow us on our adventure https://www.facebook.com/SupermassiveMomentum/ https://hearthis.at/joejeffries/sumo-2018-3-16/
-
Can anyone tell me the difference between flash memory and firmware? Line6 Monkey tells me that my jtv89 has 2.21 flash memory and 1.03 Firmware. I think the flash is current for my jtv89, but can't find out what the newest firmware is supposed to be. Thanks
-
I'm experiencing two issues in 2.53 that I'm pretty sure are NOT in my head: Issue experienced while programming presets with H9 being controlled via Helix MIDI for program changes, etc. - At times when switching between snapshots, all Distortion blocks will be turned on, when - previously on that Snapshot, specific Distortion blocks had been assigned/selected - MIDI Program Change messages being sent by Instant Commands on Snapshots are being changed/re-assigned. Most recent time it happened was when I was setting up a new Snapshot to send PC Instant command to select preset on the H9. Where, previously - Snapshots had been setup to send: Snapshot 1: PC 0 Snapshot 2: PC 0 Snapshot 3: PC 1 Snapshot 4: PC 2 After the new Snapshot (6) add been setup to send PC 9; all other Snapshots were now setup to send PC 1
-
Hey everyone, I just got a awesome Spider MK 2 HD100, and iam really happy with it, but it has come with the older floorboard with no connection to pc so I have bought a midi to USB cable to connect from the head into my pc but everytime I begin the firmware update i get a few popup windows open saying everything is ok click "yes" to proceed and then tick the user agreement and then i get a error window with the code 8000000, any clues please? Windows 10 btw. Cheers. Shaun.
-
As Spider V Firmware 1.05 Release Notes promises: "New Global setting: "Phones Mode" switches the headphone output between normal operation (Phone) and stereo line out (Line) for connecting to a mixer or audio interface without muting the speakers. In Line out mode, the headphone output is not affected by the position of the master volume, nor the presence of a cable inserted into the Phones jack. This is primarily for use on a Spider V that does not include XLR outputs."I upgraded firmware on my Spider V 60, but this does not work for me, mode "line" mutes speakers.
-
Hi, I recieived my AMPLIFi 75 amp yesterday and went about updating the firmware on it last night. After a good deal of frustation (The PC app kept failing to update) I managed to update it via my Mac but now I can't connect my android device, the bluetooth connects fine and the app is clearly seeing something as it says that the firmaware isn't up-to-date and so I can't us the app to make changes. I've checked on the Mac and it shows the amp firmware as definately being 2.6 and the phone app is too. The phone I am using is the Nexus 6P. Any help would be greatly appreciated.
