Search the Community

M5 FIRMWARE UPDATE INSTRUCTIONS NEEDED: A MIDI interface that connects to your computer via USB (download the current Driver for it if you don't have it installed) 2 MIDI cables (or a MIDI interface such as the M-Audio Uno that comes with attached MIDI cables) NOTE: Line 6 recommends a name brand USB to MIDI interface produced by an audio company that supports/updates their drivers. Good choices include: M-Audio, Edirol, E-Mu and MOTU. These interfaces have proven to be more robust and reliable when it comes to large MIDI transfers. For further infomation on MIDI connectivity and interfaces, please go over the following MIDI Document Line 6 Monkey 1.35 or higher installed. Download and install the Line 6 Monkey software here Procedure Connect your MIDI interface to your computer via USB cable. Connect the M5 MIDI Out to your MIDI interface In, and connect the M9/M5 MIDI In to your MIDI interface Out. Launch the Line 6 Monkey 1.35 (or higher) with the M5 connected via the MIDI interface and powered on. Select the Flash Memory line item and click the Update Selection button to install the flash memory update into the M9/M5. The device will receive the firmware data and the unit will be updated to the latest Firmware. It sometimes takes 30 seconds to 1 minute to appear like the unit is receiving the update and takes several minutes to complete. The M5 will re-initialize when the update is complete.

Desplázate hacia abajo para ver las instrucciones en español. Faites défiler la page vers le bas pour trouver des instructions en français. Anweisungen auf Deutsch finden Sie weiter unten. Per le istruzioni in Italiano scorrete verso il basso. Overview: For those who have access to a Spider V (MKI or MKII) amp and wish to update the G10T Transmitter, it must be done in the order shown below (first update the amp, then the G10). We strongly suggest updating the amp with the latest version of the Line 6 Updater from a desktop/laptop computer, even though it is possible to update the amp from a mobile device. Video Tutorial: Updating a Relay-Ready Spider V Amp and G10T Transmitter With a Mac Computer Video Tutorial: Updating a Relay-Ready Spider V Amp and G10T Transmitter With a Windows Computer I. Update the Spider V Amp Firmware With a Computer First, (for Windows users) download and install the Spider V drivers Go to Line6.com and click on "Support" Select "Downloads" and set the three pulldown windows under "Free Software Downloads" to: [Spider V 60], [Line 6 Drivers], [your PC OS] Click "GO" The page will update with the Line 6 drivers for the Spider V. Click 'GET DOWNLOAD' to download the driver installer to your computer. Log in to your free Line 6 User account (or create a new account) Click on 'ACCEPT AND DOWNLOAD' and follow the instructions to save the driver installer When the installer has been downloaded, double-click on it and follow the instructions to install it in your computer Next, download and install the Line 6 Updater for Spider V Go to Line6.com and click on "Support" Select "Downloads" and set the three pulldown windows under"Free Software Downloads" to: [spider V 30], [Line 6 Updater], [your Mac or PC OS] Click "GO" The page will update with the Line 6 Updater for the Spider V. Click 'GET DOWNLOAD' to download the updater program to your computer. Click on 'ACCEPT AND DOWNLOAD' and follow the instructions to save the updater installer When the program has been downloaded, double-click on it and follow the instructions to install it in your computer Lastly, update the Spider V amp Connect the Spider V’s USB port to your computer with a traditional USB cable Slide the "SELECT" switch to the USB port labeled Mac/PC Turn the amp on Open the Line 6 Updater application and sign in with your Line 6 User Account Click on the Spider V amp Click the “Update” button next to the latest firmware version at the top Follow the prompts to begin the update process Do not turn off or unplug your Spider V or computer during the update Watch for the update status to be completed on the Spider V LCD. Once completed, the amp will restart. Disconnect and reconnect the USB cable, then repeat the process for the G10T Transmitter Note: If you experience a failed update or your amp locks up during boot up, you can hold down the Amp and FX buttons to enter Update Mode. Once it's in Update Mode, attempt the update procedure again. II. Update the G10T Firmware with the Spider V Amp Make sure the Spider V amp is still connected to the computer, and that the computer is still connected to the internet Insert the G10T all the way into the Spider's Input jack Ensure that the "SELECT" switch is still engaged with the USB port labeled "Mac/PC". Turn on your Spider amp if it's off. Run the Line 6 Updater program. Sign in to your Line 6 User Account. Click on “Relay G10T” Click the “Update” button next to the latest firmware version. Follow the prompts to begin the update process. Important: Do not turn off or unplug your Spider V amp or computer during the update. The Updater will say the amp is resetting, but take note of the amp's display, as it will continue updating, ultimately showing "Part 1 of 1 100% Updating Transmttr". The amp will reset itself, ending the update process. Cómo actualizar el firmware del transmisor G10 mediante los amplificadores Spider V Descripción general: Aquellos usuarios que dispongan de un amplificador Spider V (MKI o MKII) y deseen actualizar el transmisor G10T, el proceso debe realizarse en el orden indicado a continuación (primero actualizar el amplificador y luego el G10). Recomendamos encarecidamente actualizar el amplificador con la última versión del Line 6 Updater desde un ordenador de sobremesa/portátil, aunque puede hacerse desde un dispositivo móvil. Tutorial en vídeo: Actualizar un transmisor G10T y un amplificador Spider V compatible con Relay con un ordenador Mac Tutorial en vídeo: Actualizar un transmisor G10T y un amplificador Spider V compatible con Relay con un ordenador Windows I. Actualizar el firmware del amplificador Spider V con un ordenador En primer lugar, (para usuarios de Windows) descarga e instala los controladores del Spider V Visita Line6.com y haz clic en [Soporte] Selecciona “Downloads” y, en las tres ventanas desplegables de “Free Software Downloads”, selecciona “Spider V 60”, “Line 6 Drivers”, “el sistema operativo de tu PC”. Haz clic en [GO]. La página se actualizará con los controladores de Line 6 para el Spider V. Haz clic en [GET DOWNLOAD] para descargar el instalador del controlador en tu ordenador. Inicia sesión en tu cuenta de usuario gratuita de Line 6 (o bien crea una cuenta nueva). Haz clic en [ACCEPT AND DOWNLOAD] y sigue las instrucciones para guardar el instalador del controlador. Una vez descargado el instalador, haz doble clic en él y sigue las instrucciones para instalarlo en tu ordenador. A continuación, descarga e instala el Line 6 Updater para Spider V Visita Line6.com y haz clic en [Soporte]. Selecciona “Downloads” y, en las tres ventanas desplegables de “Free Software Downloads”, selecciona “Spider V 30”, “Line 6 Updater”, “el sistema operativo de tu Mac o PC”. Haz clic en [GO]. La página se actualizará con el actualizador Line 6 para el Spider V. Haz clic en [GET DOWNLOAD] para descargar el programa del actualización en tu ordenador. Haz clic en [ACCEPT AND DOWNLOAD] y sigue las instrucciones para guardar el instalador del actualizador. Una vez descargado el programa, haz doble clic en él y sigue las instrucciones para instalarlo en tu ordenador. Por último, actualiza el amplificador Spider V Conecta el puerto USB del Spider V a tu ordenador con un cable USB tradicional. Desliza el conmutador SELECT hasta el puerto USB marcado como Mac/PC. Activa el amplificador. Abre la aplicación Line 6 Updater e inicia sesión con tu cuenta de usuario de Line 6. Haz clic en el amplificador Spider V. Haz clic en el botón [Update] situado junto a la última versión del firmware en la parte superior. Sigue las instrucciones para empezar el proceso de actualización. No desactives ni desconectes tu Spider V ni el ordenador durante la actualización. Consulta el estado de la actualización en la pantalla LCD de Spider V. Una vez completada, el amplificador se reiniciará. Desconecta y vuelve a conectar el cable USB; a continuación, repite el proceso para el transmisor G10T. Nota: Si falla la actualización o si tu amplificador se bloquea durante el arranque, puedes mantener pulsados los botones AMP y FX para entrar en el modo Update. Una vez en el modo Update, intenta realizar nuevamente el procedimiento de actualización. II. Actualizar el firmware del G10T con el amplificador Spider V Comprueba que el amplificador Spider V sigue conectado al ordenador y que éste sigue conectado a Internet. Inserta totalmente el G10T en el jack de entrada del Spider. Comprueba que el conmutador SELECT sigue conectado al puerto USB marcado como “Mac/PC”. Activa el amplificador Spider si está desactivado. Ejecuta el programa Line 6 Updater. Inicia sesión en tu cuenta de usuario de Line 6. Haz clic en [Relay G10T]. Haz clic en el botón [Update] situado junto a la última versión del firmware. Sigue las instrucciones para empezar el proceso de actualización. Importante: No desactives ni desconectes tu amplificador Spider V ni el ordenador durante la actualización. El Updater notificará que el amplificador se está reiniciando, pero observa la pantalla del amplificador, ya que continuará actualizándose y, al final, mostrará “Part 1 of 1 100% Updating Transmttr”. El amplificador se reiniciará, finalizando el proceso de actualización. Mise à jour du système de l’émetteur G10 via les amplis Spider V Aperçu: Si vous disposez d’un ampli Spider V (MKI ou MKII) et souhaitez mettre l’émetteur G10T à jour, suivez impérativement l’ordre indiqué ci-dessous (mise à jour de l’ampli avant celle du G10). Nous recommandons vivement de mettre l’ampli à jour avec la dernière version de l’application Line 6 Updater à partir d’un ordinateur fixe ou portable même s’il est possible de le faire à partir d’un dispositif mobile. Tutoriel vidéo: Mise à jour d’un ampli Spider V compatible Relay et d’un émetteur G10T avec un ordinateur Mac Tutoriel vidéo: Mise à jour d’un ampli Spider V compatible Relay et d’un émetteur G10T avec un ordinateur Windows I. Mise à jour du système de l’ampli Spider V avec un ordinateur (Pour utilisateurs Windows) Commencez par télécharger et installer les pilotes Spider V. Rendez-vous sur Line6.com et cliquez sur [Assistance]. Sélectionnez «Downloads» et réglez les trois menus déroulants sous «Free Software Downloads» sur «Spider V 60», «Line 6 Drivers», «le système de votre ordinateur». Cliquez sur [GO]. La page affiche les pilotes Line 6 pour le Spider V. Cliquez sur [GET DOWNLOAD] pour télécharger l’installeur de pilote sur votre ordinateur. Connectez-vous à votre compte utilisateur Line 6 gratuit (ou créez un compte). Cliquez sur [ACCEPT AND DOWNLOAD] et suivez les instructions pour sauvegarder l’installeur de pilote. Quand l’installeur est téléchargé, double-cliquez dessus et suivez les instructions pour l’installer sur votre ordinateur. Ensuite, téléchargez et installez l’application Line 6 Updater pour Spider V. Rendez-vous sur Line6.com et cliquez sur [Assistance]. Sélectionnez «Downloads» et réglez les trois menus déroulants sous «Free Software Downloads» sur «Spider V 30», «Line 6 Updater», «votre système Mac ou PC». Cliquez sur [GO]. La page affiche l’application Line 6 Updater pour le Spider V. Cliquez sur [GET DOWNLOAD] pour télécharger l’application de mise à jour sur votre ordinateur. Cliquez sur [ACCEPT AND DOWNLOAD] et suivez les instructions pour sauvegarder l’installeur de l’Updater. Quand le programme a été téléchargé, double-cliquez dessus et suivez les instructions pour l’installer sur votre ordinateur. Pour finir, mettez l’ampli Spider V à jour Branchez la prise USB du Spider V à votre ordinateur avec un câble USB conventionnel. Faites glisser le commutateur SELECT sur le port USB Mac/PC. Mettez l’ampli sous tension. Ouvrez l’application Line 6 Updater et identifiez-vous avec votre compte utilisateur Line 6. Cliquez sur l’ampli Spider V. Cliquez sur le bouton [Update] à côté de la version la plus récente du système en tête de liste. Suivez les instructions pour lancer la mise à jour. N’éteignez pas et ne débranchez pas le Spider V ou l’ordinateur durant la mise à jour. Surveillez l’évolution de la mise à jour sur l’écran LCD du Spider V. A la fin, l’ampli redémarre. Débranchez et rebranchez le câble USB puis recommencez l’opération pour l’émetteur G10T. Remarque: Si la mise à jour échoue ou si votre ampli se bloque durant le redémarrage, maintenez les boutons AMP et FX enfoncés pour passer en mode Update. Une fois en mode Update, recommencez la procédure de mise à jour. II. Mise à jour du système du G10T avec l’ampli Spider V Vérifiez que l’ampli Spider V est toujours connecté à l’ordinateur et que l’ordinateur est toujours connecté à internet. Insérez le G10T à fond dans la prise Input du Spider. Vérifiez que le commutateur SELECT est toujours réglé sur le port USB Mac/PC. Allumez l’ampli Spider s’il est éteint. Lancez l’application Line 6 Updater. Identifiez-vous avec votre compte utilisateur Line 6. Cliquez sur [Relay G10T]. Cliquez sur le bouton [Update] à côté de la version la plus récente du système. Suivez les instructions pour lancer la mise à jour. Important: N’éteignez pas et ne débranchez pas le Spider V ou l’ordinateur durant la mise à jour. L’Updater signale que l’ampli se réinitialise mais surveillez l’écran de l’ampli qui finira par afficher «Part 1 of 1 100% Updating Transmttr». L’ampli se réinitialise alors, concluant ainsi la mise à jour. Firmware-Aktualisierung des G10-Senders mit einem Spider V-Verstärker Vorweg: Wer Zugriff auf einen Spider V (MKI oder MKII) Verstärker hat und seinen G10T-Sender aktualisieren möchte, muss in der nachfolgend beschriebenen Reihenfolge vorgehen (erst der Amp, dann der G10). Wir möchten Ihnen ans Herz legen, den Verstärker mit der aktuellen Line 6 Updater-Version von einem Computer/Laptop aus zu aktualisieren, wenngleich dies auch mit einem Mobilgerät möglich ist. Video-Tutorial: Aktualisieren eines Relay-fähigen Spider V-Verstärkers und des G10T-Senders mit einem Mac-Computer Video-Tutorial: Aktualisieren eines Relay-fähigen Spider V-Verstärkers und des G10T-Senders mit einem Windows-Computer I. Aktualisieren der Spider V-Verstärker-Firmware mit einem Computer (Für Windows-Anwender:) Laden Sie sich die Spider V-Treiber herunter und installieren Sie sie Surfen Sie zu Line6.com und klicken Sie auf [Support]. Wählen Sie “Downloads” und mit den drei Listenfenstern unter “Free Software Downloads” zunächst “Spider V 60”, dann “Line 6 Drivers” und Ihr Computer-Betriebssystem. Klicken Sie auf [GO]. Jetzt werden die Line 6-Treiber für die Spider V-Amps angezeigt. Klicken Sie auf [GET DOWNLOAD], um sich den Treiber herunterzuladen. Loggen Sie sich in Ihr Line 6-Benutzerkonto ein (oder legen Sie sich ein Konto an). Klicken Sie auf [ACCEPT AND DOWNLOAD] und befolgen Sie die Hinweise zum Sichern des Installationsprogramms. Doppelklicken Sie auf das heruntergeladene Installationsprogramm und befolgen Sie die Hinweise für die Installation auf dem Rechner. Laden Sie sich jetzt den “Line 6 Updater” für den Spider V herunter Surfen Sie zu Line6.com und klicken Sie auf [Support]. Wählen Sie “Downloads” und mit den drei Listenfenstern unter “Free Software Downloads” zunächst “Spider V 30”, dann “Line 6 Updater” und Ihr Computer-Betriebssystem. Klicken Sie auf [GO]. Jetzt werden die Line 6 Updater-Treiber für die Spider V-Amps angezeigt. Klicken Sie auf [GET DOWNLOAD], um sich das Updater-Programm herunterzuladen. Klicken Sie auf [ACCEPT AND DOWNLOAD] und befolgen Sie die Hinweise zum Sichern des Updaters. Doppelklicken Sie auf das heruntergeladene Programm und befolgen Sie die Hinweise für die Installation auf dem Rechner. Aktualisieren Sie Ihren Spider V-Verstärker Schließen Sie den USB-Port des Spider V mit einem geeigneten Kabel an den Computer an. Schieben Sie den SELECT-Schalter zum USB-Port mit der Beschriftung “Mac/PC”. Schalten Sie den Verstärker ein. Öffnen Sie den “Line 6 Updater” und loggen Sie sich in Ihr Line 6-Konto ein. Klicken Sie auf [Spider V]. Klicken Sie auf den [Update]-Button neben der aktuellen Firmware-Version (ganz oben). Befolgen Sie die Anweisungen, um die Aktualisierung zu starten. Schalten Sie den Spider V bzw. Computer bei laufender Aktualisierung nicht aus und lösen Sie nie die Verbindung. Das LC-Display des Spider V informiert über den Fortgang der Aktualisierung. Am Ende des Vorgangs wird der Amp neu gestartet. Lösen Sie die USB-Verbindung und Wiederholen Sie den Vorgang für den G10T-Sender. Anmerkung: Wenn die Aktualisierung fehlschlägt oder der Verstärker beim Hochfahren hängen bleibt, können Sie den AMP- und FX-Taster gedrückt halten, um in den Update-Modus zu wechseln. Wiederholen Sie die Aktualisierung im Update-Modus noch einmal. II. Aktualisieren der G10T-Firmware mit dem Spider V-Verstärker Der Spider V-Verstärker muss noch mit dem Computer verbunden sein – und der Rechner muss einen Internetzugang haben. Schieben Sie den G10T komplett in die INPUT-Buchse des Spider. Schieben Sie den SELECT-Schalter zum USB-Port namens “Mac/PC”. Schalten Sie den Spider-Verstärker bei Bedarf ein. Starten Sie “Line 6 Updater”. Loggen Sie sich in Ihr Line 6-Benutzerkonto ein. Klicken Sie auf [Relay G10T]. Klicken Sie auf den [Update]-Button neben der aktuellen Firmware-Version. Befolgen Sie die Anweisungen, um die Aktualisierung zu starten. Wichtig: Schalten Sie den Spider V bzw. Computer bei laufender Aktualisierung nicht aus und lösen Sie nie die Verbindung. Der “Updater” zeigt an, dass der Verstärker zurückgestellt wird. Im Display des Amps wird der Fortgang der Aktualisierung angezeigt und wenig später “Part 1 of 1 100% Updating Transmttr”. Der Verstärker wird schließlich zurückgestellt – die Aktualisierung ist beendet. Come Aggiornare il Firmware del Trasmettitore G10 tramite Amplificatori Spider V Panoramica: Coloro che hanno a disposizione un ampli Spider V (MKI o MKII) e vogliono aggiornare il Trasmettitore G10T, dovranno farlo seguendo l’ordine indicato qui di seguito (prima aggiornare l’ampli, poi il G10) Sebbene sia possibile farlo anche da dispositivo mobile, vi consigliamo vivamente di aggiornare l’ampli con l’ultima versione del Line 6 Updater da un computer desktop/laptop. Tutorial Video: Aggiornare un Ampli Spider V Relay-Ready e un Trasmettitore G10T Con un Computer Mac Tutorial Video: Aggiornare un Ampli Spider V Relay-Ready e un Trasmettitore G10T Con un Computer Windows I. Aggiornare il firmware di un Ampli Spider V Con un Computer Prima di tutto, (per utenti Windows) scaricate e installate i driver dello Spider V Andate su Line6.com e cliccate su [Support] Scegliete “Downloads” e selezionate nei tre menu a discesa di “Free Software Downloads” “Spider V 60”, “Line 6 Drivers” e “sistema operativo del vostro PC”. Cliccate [GO]. La pagina si aggiornerà con i driver Line 6 per lo Spider V. Cliccate [GET DOWNLOAD] per scaricare sul vostro computer l’installer del driver. Loggatevi con il vostro account gratuito Line 6 (o create un nuovo account). Cliccate [ACCEPT AND DOWNLOAD] (Accetta e Scarica) e seguite le istruzioni per salvare l’installer del driver. Quando l’installer è stato scaricato, per installarlo sul vostro computer fate doppio click su di esso e seguite le istruzioni. Poi, scaricate e installate Line 6 Updater per lo Spider V Andate su Line6.com e cliccate su [Support]. Scegliete “Downloads” e selezionate nei tre menu a discesa di “Free Software Downloads” “Spider V 30”, “Line 6 Updater” e “sistema operativo Mac o PC”. Cliccate [GO]. La pagina si aggiornerà con l’Updater Line 6 per lo Spider V. Cliccate [GET DOWNLOAD] per scaricare sul vostro computer il programma di aggiornamento (Updater). Cliccate [ACCEPT AND DOWNLOAD] (Accetta e Scarica) e seguite le istruzioni per salvare l’installer dell’Updater. Quando il programma è stato scaricato, per installarlo sul vostro computer fate doppio click su di esso e seguite le istruzioni. Infine, aggiornate l’ampli Spider V Collegate la porta USB dello Spider V al computer con un normale cavo USB. Spostate il selettore SELECT sulla porta USB contrassegnata con Mac/PC. Accendete l’ampli. Aprite l’applicazione Line 6 Updater e registratevi con il vostro Account Line 6. Cliccate sull’ampli Spider V. Cliccate il pulsante [Update] in alto vicino all’ultima versione del firmware. Per iniziare l’aggiornamento seguite le istruzioni. Durante l’aggiornamento non spegnete né scollegate lo Spider V o il computer. Verificate sull’LCD dello Spider V che l’aggiornamento sia completato. Al termine, l’ampli si riavvierà. Scollegate e ricollegare il cavo USB, poi ripetete il procedimento per il Trasmettitore G10T. Nota: Se l’aggiornamento non va a buon fine o l’ampli si blocca all’accensione, tenete premuti i pulsanti AMP e FX per entrare in modalità Update. Una volta in modalità Update, eseguite di nuovo la procedura di aggiornamento. II. Aggiornare il firmware del G10T con l’Ampli Spider V Assicuratevi che l’ampli Spider V sia ancora collegato al computer e che il computer sia collegato ad internet. Inserite completamente il G10T nel jack di ingresso dello Spider. Assicuratevi che il selettore SELECT sia ancora posizionato sulla porta USB contrassegnata “Mac/PC”. Accendete il vostro Ampli Spider, se è spento. Lanciate il programma Line 6 Updater. Eseguite il login al vostro Account Line 6. Cliccate su [Relay G10T]. Cliccate il pulsante [Update] vicino all’ultima versione del firmware. Per iniziare l’aggiornamento seguite le istruzioni. Importante: Durante l’aggiornamento non spegnete né scollegate lo Spider V o il computer. L’Updater indicherà che l’ampli si sta resettando, ma voi guardate lo schermo dell’ampli, che continuerà l’aggiornamento, finché al termine scriverà “Part 1 of 1 100% Updating Transmttr”. L’ampli si resetterà, terminando il procedimento di aggiornamento.

Desplázate hacia abajo para ver las instrucciones en español. Faites défiler la page vers le bas pour trouver des instructions en français. Anweisungen auf Deutsch finden Sie weiter unten. Per le istruzioni in Italiano scorrete verso il basso. Updating Relay G10/G10S firmware from an internet-connected Mac or PC Video Tutorial: G10/G10S firmware update instructions for Windows users Video Tutorial: G10/G10S firmware update instructions for Mac users First, download the latest version of the Line 6 Updater for Relay G10/G10S: Go to www.Line6.com and click on "Support" Scroll down and select "Downloads" On the following page, set the three pulldown windows under "Free Software Downloads" to: [Relay G10 or Relay G10S], [Line 6 Updater], [your Mac or PC OS] Click "GO" The page will update with the latest Line 6 Updater version available. Click 'GET DOWNLOAD' to download the Updater program to your computer You will be prompted to either log in to your Line 6 User account or to create a new account Click on 'ACCEPT AND DOWNLOAD' and follow the on-screen instructions to save the Line 6 Updater installer file After the file has been completely downloaded, double-click on the downloaded file and follow the instructions to install it to your computer Mac Users: If you run into trouble with your Mac allowing you to install the download, please see this article. Next, update your Relay G10/G10S Receiver and Transmitter Insert the Transmitter all the way into the Receiver Connect the receiver’s USB port to your computer with the USB cable that was included in the box, or use a similar Micro-USB cable (Note: some Micro-USB cables only charge devices and do not pass data. Try multiple cables of you cannot get a connection) Run the Line 6 Updater program. Sign in to your Line 6 User Account. Click on “Relay G10/G10S Receiver” Click the “Update” button next to the latest firmware version. Follow the prompts to begin the update process. Important: Do not turn off or unplug your Relay receiver or computer during the update. After the update is complete, repeat the process for the Transmitter by disconnecting and reconnecting the USB cable, then clicking “Continue” in the Updater Please see this article if your computer does not detect your G10. Cómo actualizar el firmware del Relay G10/G10S Actualizar el firmware del Relay G10/G10S desde un Mac o PC conectado a Internet Tutorial en vídeo: Instrucciones de actualización del firmware del G10/G10S para usuarios de Windows Tutorial en vídeo: Instrucciones de actualización del firmware del G10/G10S para usuarios de Mac En primer lugar, descarga la última versión del actualizador de Line 6 para Relay G10/G10S: Visita www.Line6.com y haz clic en [Soporte]. Desplázate hacia abajo y selecciona “Downloads”. En la siguiente página, verás tres ventanas desplegables en “Free Software Downloads”; selecciona “Relay G10 o Relay G10S”, “Line 6 Updater”, “el sistema operativo de tu Mac o PC”. Haz clic en [GO]. La página se actualizará con la última versión de Line 6 Updater disponible. Haz clic en [GET DOWNLOAD] para descargar el programa del actualizador en tu ordenador. Se te pedirá que inicies sesión en tu cuenta de usuario de Line 6 o bien que crees una nueva cuenta. Haz clic en [ACCEPT AND DOWNLOAD] y sigue las instrucciones que aparecen en pantalla para guardar el archivo del instalador de Line 6 Updater. Una vez el archivo se haya descargado por completo, haz doble clic en el archivo descargado y sigue las instrucciones para instalarlo en tu ordenador. Usuarios de Mac: Si tienes problemas con tu Mac para instalar la descarga, por favor vea este artículo. A continuación, actualiza tu receptor y transmisor Relay G10/G10S Inserta totalmente el transmisor en el receptor Conecta el puerto USB del receptor a tu ordenador con el cable USB incluido en la caja o bien utiliza un cable Micro-USB similar (Nota: algunos cables Micro-USB solo permiten cargar dispositivos y no transmiten datos. Prueba con varios cables si no consigues conectarte) Ejecuta el programa Line 6 Updater. Inicia sesión en tu cuenta de usuario de Line 6. Haz clic en [Relay G10/G10S Receiver]. Haz clic en el botón [Update] situado junto a la última versión del firmware. Sigue las instrucciones para empezar el proceso de actualización. Importante: No desactives ni desconectes tu receptor Relay ni el ordenador durante la actualización. Una vez completada la actualización, repite el proceso para el transmisor desconectando y volviendo a conectar el cable USB; a continuación, haz clic en [Continue] en el Updater. Consulte este artículo si su computadora no detecta su G10. Mise à jour du système du Relay G10/G10S Mise à jour du système du Relay G10/G10S avec un Mac ou PC connecté à internet Tutoriel vidéo: Instructions pour la mise à jour du système du G10/G10S pour utilisateurs Windows Tutoriel vidéo: Instructions pour la mise à jour du système du G10/G10S pour utilisateurs Mac Téléchargez la version la plus récente de l’application Line 6 Updater pour Relay G10/G10S: Rendez-vous sur www.Line6.com et cliquez sur [Assistance]. Faites défiler la page vers le bas et sélectionnez «Downloads». A la page suivante, réglez les trois menus déroulants sous «Free Software Downloads» sur «Relay G10» ou «Relay G10S», «Line 6 Updater», «votre système Mac ou PC». Cliquez sur [GO]. La page affiche la version la plus récente de Line 6 Updater. Cliquez sur [GET DOWNLOAD] pour télécharger l’application de mise à jour sur votre ordinateur. Vous êtes invité(e) à vous connecter à votre compte utilisateur Line 6 gratuit ou à créer un compte. Cliquez sur [ACCEPT AND DOWNLOAD] et suivez les instructions pour sauvegarder le fichier installeur de l’appli Line 6 Updater. Une fois le fichier téléchargé, double-cliquez dessus et suivez les instructions pour l’installer sur votre ordinateur. Utilisateurs Mac: Si votre Mac ne vous autorise pas à installer l’appli téléchargée, lisez cet article. Mise à jour de votre récepteur et émetteur Relay G10/G10S Insérez l’émetteur à fond dans le récepteur. Reliez la prise USB du récepteur à l’ordinateur avec le câble USB fourni ou un câble micro-USB similaire. (Remarque: Certains câbles micro-USB se bornent à charger les dispositifs et ne transmettent pas de données. Essayez différents câbles si vous n’avez pas de connexion.) Lancez l’application Line 6 Updater. Identifiez-vous avec votre compte utilisateur Line 6. Cliquez sur [Relay G10/G10S Receiver]. Cliquez sur le bouton [Update] à côté de la version la plus récente du système. Suivez les instructions pour lancer la mise à jour. Important: N’éteignez pas et ne débranchez pas le récepteur Relay ou l’ordinateur durant la mise à jour. Après la mise à jour, recommencez la procédure pour l’émetteur en débranchant et rebranchant le câble USB, puis cliquez sur [Continue] dans l’Updater. Veuillez consulter cet article si votre ordinateur ne détecte pas votre G10. Aktualisieren der Relay G10/G10S-Firmware Aktualisieren der Relay G10/G10S-Firmware mit einem Mac bzw. PC mit Internetzugang Video-Tutorial: Anweisungen zum Aktualisieren der G10/G10S-Firmware (Windows) Video-Tutorial: Anweisungen zum Aktualisieren der G10/G10S-Firmware (Mac) Laden Sie sich die aktuelle “Line 6 Updater”-Version für den Relay G10/G10S herunter: Surfen Sie zu www.Line6.com und klicken Sie auf [Support]. Scrollen Sie nach unten und wählen Sie “Downloads”. Wählen Sie auf der nächsten Seite mit den drei Listenfenstern unter “Free Software Downloads” zunächst “Relay G10” oder “Relay G10S”, dann “Line 6 Updater” und Ihr Computer-Betriebssystem. Klicken Sie auf [GO]. Auf der jetzt erscheinenden Seite wird die aktuelle “Line 6 Updater”-Version ganz oben angezeigt. Klicken Sie auf [GET DOWNLOAD], um sich das Updater-Programm herunterzuladen. Loggen Sie sich in Ihr Line 6-Benutzerkonto ein (oder legen Sie sich ein Konto an). Klicken Sie auf [ACCEPT AND DOWNLOAD] und befolgen Sie die Hinweise zum Sichern des “Line 6 Updater”-Installationsprogramms. Nachdem die Datei komplett heruntergeladen wurde, doppelklicken Sie darauf und befolgen die Hinweise für die Installation auf Ihrem Computer. Mac-Anwender: Wenn Sie die heruntergeladene Datei nicht auf Ihrem Mac installieren dürfen, siehe diesen Beitrag. Aktualisieren des Relay G10/G10S-Empfängers und -Senders Schieben Sie den Sender komplett in den Empfänger. Verbinden Sie den USB-Port des Empfängers über das beiliegende (oder ein separat gekauftes) Micro-USB-Kabel mit dem Computer. (Anmerkung: Bestimmte Micro-USB-Kabel dienen nur zum Laden und übertragen keine Daten. Probieren Sie bei Bedarf mehrere Kabel aus.) Starten Sie “Line 6 Updater”. Loggen Sie sich in Ihr Line 6-Benutzerkonto ein. Klicken Sie auf [Relay G10/G10S Receiver]. Klicken Sie auf den [Update]-Button neben der aktuellen Firmware-Version. Befolgen Sie die Anweisungen, um die Aktualisierung zu starten. Wichtig: Schalten Sie den Relay-Empfänger bzw. Computer bei laufender Aktualisierung nicht aus und lösen Sie nie die Verbindung. Nach geglückter Aktualisierung muss der Vorgang für den Sender wiederholt werden. Lösen Sie die USB-Verbindung kurz und klicken Sie im “Updater” auf [Continue]. Bitte lesen Sie diesen Artikel, wenn Ihr Computer Ihr G10 nicht erkennt. Come aggiornare il firmware del Relay G10/G10S Aggiornare il firmware del Relay G10/G10S da un Mac o PC collegato ad internet Tutorial Video: Istruzioni per l’aggiornamento del firmware di G10/G10S per utenti Windows Tutorial Video: Istruzioni per l’aggiornamento del firmware di G10/G10S per utenti Mac Innanzitutto scaricate l’ultima versione dell’Updater Line 6 per Relay G10/G10S. Andate su www.Line6.com e cliccate su [Support]. Scorrete in basso e selezionate “Downloads”. Nella pagina seguente, in “Free Software Downloads” selezionate nei tre menu a discesa “Relay G10 o Relay G10S”, “Line 6 Updater” e “sistema operativo Mac o PC”. Cliccate [GO]. La pagina si aggiornerà con l’ultima versione disponibile di Line 6 Updater. Cliccate [GET DOWNLOAD] per scaricare sul vostro computer il programma di aggiornamento (Updater). Vi verrà chiesto di loggarvi con il vostro account Line 6 o di create un nuovo account. Cliccate [ACCEPT AND DOWNLOAD] (Accetta e Scarica) e seguite le istruzioni sullo schermo per salvare il file dell’installer di Line 6 Updater. Quando l’installer è stato completamente scaricato, per installarlo sul vostro computer fate doppio click sul file scaricato e seguite le istruzioni. Utenti Mac: Se avete dei problemi perché il vostro Mac non vi permette di istallare, leggete questo articolo. Poi, aggiornate il vostro Ricevitore e il Trasmettitore Relay G10/G10S. Inserite completamente il Trasmettitore nel Ricevitore. Collegate al vostro computer la porta USB del ricevitore con il cavo USB contenuto nella confezione o usate un cavo Micro-USB simile (Nota: alcuni cavi Micro-USB possono solo ricaricare i dispositivi e non passano i dati. Se non riuscite ad ottenere un collegamento provate più cavi) Lanciate il programma Line 6 Updater. Eseguite il login al vostro Account Line 6. Cliccate su [Relay G10/G10S Receiver]. Cliccate il pulsante [Update] vicino all’ultima versione del firmware. Per iniziare l’aggiornamento seguite le istruzioni. Importante: Durante l’aggiornamento non spegnete né scollegate il ricevitore Relay o il computer. Terminato l’aggiornamento, ripetete il procedimento per il Trasmettitore scollegando e ricollegando il cavo USB, poi nell’Updater cliccate [Continue]. Consulta questo articolo se il tuo computer non rileva il tuo G10.

Thank you for purchasing a Spider V/Spider V MK II amp. To get the best performance from your new amp, please upload the latest firmware. You can upload in one of two ways connected to a mobile device or connected to a computer. We strongly suggest updating the amp from a desktop/laptop computer, even though it is possible to do so from a mobile device. It will take about 5 minutes to complete the upgrade. Please follow the instructions below. Updating firmware from a Mac or PC(Mac OS X doesn't require driver installation, since it uses built-in core audio): First, download and install the Spider V drivers: Go to Line6.com and click on "Support" Select "Downloads" and set the three pulldown windows under "Free Software Downloads" to: [Spider V 60], [Line 6 Drivers], [your PC OS] Click "GO" The page will update with the Line 6 drivers for the Spider V. Click 'GET DOWNLOAD' to download the driver installer to your computer. Log in to your free Line 6 User account (or create a new account) Click on 'ACCEPT AND DOWNLOAD' and follow the instructions to save the driver installer When the installer has been downloaded, double-click on it and follow the instructions to install it in your computer. Next, download and install the Line 6 Updater for Spider V: Go to Line6.com and click on "Support" Select "Downloads" and set the three pulldown windows under"Free Software Downloads" to: [spider V 30], [Line 6 Updater], [your Mac or PC OS] Click "GO" The page will update with the Line 6 Updater for the Spider V. Click 'GET DOWNLOAD' to download the updater program to your computer. Click on 'ACCEPT AND DOWNLOAD' and follow the instructions to save the updater installer When the program has been downloaded, double-click on it and follow the instructions to install it in your computer. Finally, update your Spider V from your computer Connect the "MAC/PC/ANDROID" port to your computer with a USB cable Slide the "SELECT" switch to the USB port labeled Mac/PC. Turn on your Spider amp. Run the Line 6 Updater program. Sign in to your Line 6 User Account. Follow the instructions shown in the Line 6 Updater program to update to the latest firmware for your amp Note: If you experience a failed update or your amp locks up during boot up, you can hold down the Amp and FX buttons to enter Update Mode. Once it's in Update Mode, attempt the update procedure again. Updating firmware from an Android device: If you haven't already done so, create a Line6 User account: Go to Line6.com http://Line6.com> and click on "Sign In". Follow the instructions to create a free account. On your device, download the Spider Remote App from Google Play. Launch the Spider Remote application. Page through the slideshow, accept the terms and conditions, and then log into your Line 6 account. Connect your device to the appropriate USB connector on the back of the Spider V. Slide the "SELECT" switch to the USB port labeled "Mac/PC/Android". Turn on your Spider amp. Your Android device will present a dialog, which asks if you want to give Spider Remote permission to use your Spider Amp. Be sure to check the "Use by default for this USB device" checkbox, and then touch OK. Note: On some devices, this dialog may appear twice. If that occurs, just repeat this step. Spider Remote will automatically relaunch, and will provide instructions to upload the latest firmware for your amp. Updating firmware from an iOS device: If you haven't already done so, create a Line6 User account: Go to Line6.com http://Line6.com> and click on 'Sign In'. Follow the instructions to create a free account. On your device, download the Spider Remote App from the App Store. Connect your device to the appropriate USB connector on the back of the Spider V. Slide the "SELECT" switch to the USB port labeled "iPhone/iPod". Turn on your amp. Launch the Spider Remote application. Page through the slideshow, accept the terms and conditions, and then log into your Line 6 account. Follow the instructions to upload the latest firmware for your amp.

This update can be performed with either a PC (on Windows 7 or Windows 8) or with a Mac (on OS X Mountain Lion, Mavericks, or Yosemite). A micro-USB cable (included with G70) is necessary to connect the device to be updated to the computer. Please note that a Line 6 account and password will also be required, in order to download the Updater app and to sign into the Updater app when launched. If you do not already have an account, you can create one at https://line6.com/login.html. Part 1: Installing the Line 6 Updater app: Visit line6.com and sign in using the appropriate account. Go to the downloads page at www.line6.com/software and download the Line 6 Updater app for Mac or Windows. Once the Line 6 Updater app is downloaded, double-click the file to install the app on the computer. You will be guided through the installation process. Once the app is successfully installed, proceed to Part 2 “ Updating a Relay TB516 G Transmitter. Part 2: Updating a Relay TB516 G Transmitter: 1. Launch the Line 6 Updater app. 2. Once the app is launched, enter your appropriate Line 6 username and password, and then click the Sign In button. 3. Connect the micro-USB cable to the computer, and connect the other end to the TB516 G transmitter that is to be updated. It is recommended that there are no batteries in the transmitter for the update process. The first time this step is performed may take up to two minutes, depending on the speed of a user's internet connection, as the machine will attempt to install a driver. Subsequent attempts of this step should occur instantaneously if the same USB port is used on the machine. The Relay TB516 G transmitter should now appear, as below: 4. Click on the Relay TB516 G Transmitter to select it 5. Click on the 'Update' button towards the right, at the very top of the list. 6. Click the 'Continue' button at the upper right 7. Click the 'Accept' button at the upper right. 8. Click the 'Next' button at the lower right of the above screen 9. Please confirm that 'Firmware Version 1.xx' is now displayed in this window. You may now disconnect the Relay TB516 G Transmitter. Click the 'Continue' button and you will be able to connect another device to update, as necessary. * Note: if the update process should fail for any reason during step 8, please try the following: Disconnect the Relay TB516 G from the micro-USB cable. Insert a pair of AA batteries. Power on the transmitter. After 5 seconds, power off the transmitter. Remove the batteries and connect the transmitter to the micro-USB cable as in Step 3 of the update instructions, and continue with the update procedure. Part 3: Updating a Relay G70 Receiver: 1. Launch the Line 6 Updater app (if the app is already open, proceed to the next step). 2. Once the app is launched, enter the appropriate Line 6 username and password, click the 'Sign In' button. You will be brought to the following screen: 3. Connect one end of the micro-USB cable to a USB 2.0 port on the computer (hubs are not supported). 4. With the power switch of the G70 receiver in the '0' (off) position, connect the unit to the other end of the micro-USB cable. 5. Put the power switch of the G70 receiver in the '1' (on) position. The receiver's audio LED should appear solid red and the 'LINE 6' splash screen should appear on the unit's display: * on some USB ports with some computers, it has been observed that the receiver may not remain on the 'LINE 6' screen. Should this happen, please put the power switch back to '0' and then back to 'I' again and repeat this if necessary until the device remains on the 'LINE 6' screen, as above. 6. The Relay G70 Receiver icon should now appear within the app 7. Click on the Relay G70 Receiver to select it 8. Click on the 'Update' button towards the right, at the very top of the list. 9. Click the 'Continue' button at the upper right 10. Click the 'Accept' button at the upper right. 11. Click the 'Next' button at the lower right 12. Please confirm that 'Firmware Version 1.xx' is now displayed in this window. You may now disconnect the receiver. Click the 'Continue' button and you will be able to connect another device to update, as necessary. * Note: if the update process should fail for any reason during step 12, please try the following: Put the Relay G70 Receiver's power switch into the '0' (off) position. Return to Step 5 and continue with the update procedure. If the updating process should fail for any reason, please follow these instructions: For the Relay TB516 G Transmitter: Please disconnect the transmitter from your computer's USB and close the Line 6 Updater app. Insert a pair of batteries into the transmitter. Power the transmitter on and leave it on for at least 5 seconds. Power the transmitter off. Remove the batteries from the transmitter. Reconnect the transmitter to your computer's USB. Launch the Line 6 Updater app again, sign in with your Line 6 username and password, and follow the instructions that appear to update your Relay TB516 G Transmitter. For the Relay G70 Receiver: Please disconnect the G70 receiver from your computer's USB and close the Line 6 Updater app. Reconnect the receiver to your computer's USB and make sure its power switch is in the 'I' (on) position. The receiver should display 'LINE 6' and this should remain on the display. If it does not, please disconnect the G70 receiver and then reconnect it to your computer's USB, so that you see it continues to display 'LINE 6'. In some cases, it is possible that this may take more than one attempt. Once the LINE 6 screen remains displayed on your G70, please launch the Line 6 Updater app again, sign in with your Line 6 username and password, and follow the instructions that appear to update your Relay G70 Receiver.

Here is how to update the Firehawk 1500 step by step: Note: The versions of the drivers and software may have older versions. Make sure to always select the latest versions. For Windows 7, 8, or 10 systems, please start with step 1. For OSX 10.8 and up, skip to step 8. 1. In order for your computer to see the Firehawk 1500 you will need to install the driver for the device to your computer. Open a web browser and navigate to www.Line6.com/software and select Product: Firehawk Software: Drivers from the drop down menus at the top of the page. 2. Pick the top selection from the next page by selecting "Get Download". 3. Accept the terms. 4. If in Windows, choose the run option and run the installer or navigate to the downloads window and run the installer. Pressing Control + J will bring up the downloads menu in most windows browsers, alt + command + L for Safari on Mac. 5.Disconnect your Firehawk from the computer if it's connected via USB and run the installer. 6. In the installer make sure the drivers from the Firehawk have a green check. Click next until the installer completes. 7. Reconnect Hardware when prompted and let Windows assign the driver. Now your computer will be able to communicate properly with the Firehawk. 8. Now, let's download the updater utility. Open your web browser, navigate back to www.Line6.com/software and select Line 6 Updater under the software drop down menu. 9. Select get download under the top selection, the latest choice will always be at the top. 10. Accept the agreement. 11. If in Windows, choose the run option and run the installer or navigate to the downloads window and run the installer. Pressing Control + J will bring up the downloads menu in most Windows browsers, alt + command + L for Safari on Mac. Or the installer will be in your downloads folder. 12. Run the installer for Line 6 updater. 13. In the installer make sure Updater has a green check, click next until the installer completes. 14. Run Line 6 updater from the start menu on WIn 7, Applications Folder on a Mac, or C:/Program Files (86)/Line 6 on Windows 8. 15. Accept the agreement. 16. Login to Updater with your username and password from the Line 6 website. 17. Select the Firehawk. 18. Select the latest version of flash memory. This is always the top selection. 19. NOTE: This part of the updater explains how to reset the Firehawk if it should fail. You can refer to the image here for instructions if that should ever happen. Click Next to Proceed. 20. Wait for the progress bar to complete. 21. Updater will let you know when the update is complete.

Here is how to update the Firehawk FX step by step: For Windows 7, 8, or 10 systems, please start with step 1. For OSX 10.8 and up, skip to step 8. 1. In order for your computer to see the Firehawk you will need to install the driver for the device to your computer. open a web browser and navigate to line6.com/software and select Product: Firehawk FX Software: Drivers from the drop down menus at the top of the page. 2. Pick the top selection from the next page by selecting "Get Download". 3. Accept the terms. 4. If in Windows, choose the run option and run the installer or navigate to the downloads window and run the installer. Pressing Control + J will bring up the downloads menu in most windows browsers, alt + command + L for Safari on Mac. 5.Disconnect your Firehawk from the computer if it's connected via USB and run the installer. 6. In the installer make sure the drivers from the Firehawk have a green check. Click next until the installer completes. 7. Reconnect Hardware when prompted and let Windows assign the driver. Now your computer will be able to communicate properly with the Firehawk. Make sure the Firehawk is turned on attempting when this. 8. Now, lets download the updater utility. Open your web browser, navigate back to line6.com/software and select Line 6 Updater under the software drop down menu. 9. Select get download under the top selection: 10. Accept the agreement. 11. If in Windows, choose the run option and run the installer or navigate to the downloads window and run the installer. Pressing Control + J will bring up the downloads menu in most windows browsers, alt + command + L for Safari on Mac. OIr the installer will be in your downloads folder. 12. Run the installer for Line 6 updater. 13. In the installer make sure Updater has a green check, click next until the installer completes. 14. Run Line 6 updater from the start menu on WIn 7, Applications Folder on a Mac, or C:/Program Files (86)/Line 6 on Windows 8. 15. Accept the agreement. 16. Login to Updater with your username and password from the Line 6 website. 17. Select the Firehawk. 18. Select the latest version of flash memory. This is always the top selection. 19. NOTE: This part of the updater explains how to reset the Firehawk if it should fail. You can refer to the image here for instructions if that should ever happen. Click Next to Proceed. 20. Wait for the progress bar to complete. 21. Updater will let you know when the update is complete.

All 4 tone lights (or ABCD lights on the FX100) flashing is 'recovery mode'. It is the intended behavior after a failed update. If you come across this mode, you must attempt to update the AMPLIFi again. Power down your AMPLIFi. When updating via PC, please connect the USB cable and make sure to boot the unit while holding Tone+Tap (amp, TT) or A+C (FX100) to put your AMPLIFi into Update Mode. Run the Line 6 Updater program found at www.Line6.com/software. For a guide, please refer to http://line6.com/support/page/kb/_/amplifi-products/ampl/how-to-update-amplifi-with-a-pc-r701. If you still get failed updates from the Line 6 Updater, try another USB cable and port as well as another computer When updating via an iOS device, Bluetooth works in recovery mode, but the pairing from before the failed update is not maintained. You must press the Bluetooth button and pair again from the smart device's Bluetooth menu. You can then proceed with the update.