Jump to content

Search the Community

Showing results for tags 'flash'.



More search options

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Forums

  • Community Support
    • Multi-Effects Units
    • Variax Instruments
    • Amplifiers
    • Computer Based Recording
    • Live Sound
    • Pedals/Controllers
    • Dream Rig - Line 6 Product Integration
  • General Discussion
    • Share your Settings
    • Line 6 Lounge

Categories

  • General FAQ
  • Tutorial Videos
  • Effects/Controllers
    • HELIX/HX
    • Firehawk
    • FBV Controllers (MKI / MKII/ 3)
    • M5 / M9 / M13
    • JM4 Looper
    • Stompbox Modelers / ToneCore
    • ToneCore Development Kit
  • Recording
    • Helix Native
    • Echo Farm
    • POD Farm / POD Studio / TonePort
    • Computer Audio Set Up and Troubleshooting
    • Riffworks Line 6 / Standard Edition
  • POD
    • POD HD Family
    • POD HD500/HD500X
    • POD HD300/400
    • POD X3 Family
    • POD 2.0 / PODxt Family / Pocket POD / FloorPODs
  • AMPLIFi Series Products
    • AMPLIFi 30/75/150/TT
    • AMPLIFi FX100
    • Videos
    • Tone Creation
  • Amplifiers
    • Spider V
    • Powercab
    • Firehawk 1500
    • DT50/DT25
    • Spider IV/Spider Online
    • Spider Valve
    • Spider Jam
    • Vetta
  • Live Sound
    • Relay/XD-V Digital Wireless
    • StageScape M20d Mixer
    • StageSource Speaker
  • Guitars
    • JTV / Shuriken / Variax Standard / Workbench HD
    • 1st Gen Variax Guitars / Bass / Workbench
  • Mobile Products
    • Sonic Port devices / Mobile In
    • Mobile Keys
    • MIDI Mobilizer
    • Mobile POD app
  • Dream Rig
  • Legacy Products
    • Amps
    • POD
    • Effects and Controllers
    • GearBox
    • Line 6 X2 Digital Wireless

Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Joined

  • Start

    End


Group


AIM


MSN


Website URL


ICQ


Yahoo


Jabber


Skype


Location


Interests


Registered Products

Found 33 results

  1. GeraGrind

    Line 6 Spider V problems

    Hi. I found some issues in my Line 6 Spider 240HC amp that probably have other discussions opened, but i decided to record them. https://youtu.be/67unAeUulCA In the first one, the display flashes when it's turned off. https://youtu.be/477VH-TT4W8 That sound happens when i turn off the amp. That happens sometimes using different IEC cables. https://youtu.be/Fy6RwlY-xHk This problem started when i changed my IEC cable too. Sorry for the sound quality, there is a clicking sound when i activate the reverb. I though the it could be caused by the cable, but they are universal and i guess that it could be produced by digital issues. I really like this amp but it's difficult to play a gig calmed with that kind of problems. Is anyone having these problems? Sorry for my english.
  2. Hey everyone, I just got a awesome Spider MK 2 HD100, and iam really happy with it, but it has come with the older floorboard with no connection to pc so I have bought a midi to USB cable to connect from the head into my pc but everytime I begin the firmware update i get a few popup windows open saying everything is ok click "yes" to proceed and then tick the user agreement and then i get a error window with the code 8000000, any clues please? Windows 10 btw. Cheers. Shaun.
  3. I have an POD XT which when plugged into Monkey via USB, the software stated I needed up upgrade the Flash to 3.1. I clicked to update but the process seemed to take an extrodinary long time to complete and during the process, I noted that the screen of the Pod had 'Error Code 02' dispalyed. I reset the Pod as requested but as soon as the screen turned on, I got 'ERROR CODE 02'. I tried all the buttons, tried turning dials and nothing had no effect. On research, I found that Error Code 02 relates to an issue with the Flash Memory. It seems to be a common issue that Monkey updating the Pod can corrupt the Flash, making the Pod useless. I tried putting the Pod in safe mode using the 'Save' / 'Edit' keys which did nothing. I tried safe mode using the most left black square button, again nothing. I tried the second black square button which put the Pod into another safe mode which checked the memory, this test passed. On the Monkey, the Flash was greyed out and I couldn't update it. It recognised the Pod connected via USB but couldn't establish the connection. I tried different USB cables, different USB slots, even another power supply and got nothing but the Error Code 02 on the screen. ** SOLUTION ** On a side line building up my rig, I had purchased a second hand Edirol UM-1SX which is an old fashioned Midi USB interface box, which I was going to use with my keyboard. I'd also just purchased a couple of brand new Roland Midi Cables. Once I setup the Edirol UM-1SX with my computer, the Pod XT was recognised by Monkey. I set this up by NOT using the USB cable but just connecting the Pod via the Midi Cables via the UM-1SX. Just an important point with MIDI cables, Computer Out = Pod In and Computer In = Pod Out. Now the Pod was connected to the Computer, Flash was able to update via Midi and installed to the latest Flash 3.1. Once installed and turned the Pod off and on again, I disconnected the Midi cables and connected the Pod via the USB to use Line 6 Edit. From here, no problems in editing and installing my tones. Happy days, broken Pod to working Pod. Hope this helps.
  4. Steve-abc

    POD HD500 Repair - E and E Electronics

    Hello All Anyone used E & M in Milton Keynes to get their HD500 repaired? Suffering from a sick HD500. The thing has never left the house from new. The unit was left untouched for around a year and on powering back up I received 'Update Flash' message. Carried out the procedure without incident and now the unit will boot up in one of two ways: 1 Only controllable from HD500 edit software except for volume/tone knobs which appear responsive 2 Very rarely everything working as should be. Trawled this forum and followed all the advice of reflashing etc however could never invoke global reset via the power up/ left button method. Anyway back to the original point, the line 6 site says E & M are the repairers in the UK - has anyone tried them for this kind of fix.? Thanks for reading Steve
  5. Line6Tony

    How To Update the Spider V Amp

    Thank you for purchasing a Spider V. To get the best performance from your new amp, please upload the latest firmware. You can upload in one of two ways connected to a mobile device or connected to a computer. It will take about 5 minutes to complete the upgrade. Please follow the instructions below: Updating firmware from an Android device: If you haven't already done so, create a Line6 User account: Go to Line6.com http://Line6.com> and click on "Sign In". Follow the instructions to create a free account. On your device, download the Spider Remote App from Google Play. Launch the Spider Remote application. Page through the slideshow, accept the terms and conditions, and then log into your Line 6 account. Connect your device to the appropriate USB connector on the back of the Spider V. Slide the "SELECT" switch to the USB port labeled "Mac/PC/Android". Turn on your Spider amp. Your Android device will present a dialog, which asks if you want to give Spider Remote permission to use your Spider Amp. Be sure to check the "Use by default for this USB device" checkbox, and then touch OK. Note: On some devices, this dialog may appear twice. If that occurs, just repeat this step. Spider Remote will automatically relaunch, and will provide instructions to upload the latest firmware for your amp. Updating firmware from an iOS device: If you haven't already done so, create a Line6 User account: Go to Line6.com http://Line6.com> and click on 'Sign In'. Follow the instructions to create a free account. On your device, download the Spider Remote App from the App Store. Connect your device to the appropriate USB connector on the back of the Spider V. Slide the "SELECT" switch to the USB port labeled "iPhone/iPod". Turn on your amp. Launch the Spider Remote application. Page through the slideshow, accept the terms and conditions, and then log into your Line 6 account. Follow the instructions to upload the latest firmware for your amp. Updating firmware from a Mac or PC: First, download the Line 6 Updater for Spider V: Go to Line6.com and click on "Support" Select "Downloads" and set the three pulldown windows under"Free Software Downloads" to: [spider V 30], [Line 6 Updater], [your Mac or PC OS] Click "GO" The page will update with the Line 6 Updater for the Spider V. Click 'GET DOWNLOAD' to download the updater program to your computer. Log in to your free Line 6 User account (or create a new account) Click on 'ACCEPT AND DOWNLOAD' and follow the instructions to save the program When the program has been downloaded, double-click on it and follow the instructions to install it in your computer. Next, update your Spider V from your computer Connect the "MAC/PC/ANDROID" port to your computer with a USB cable Slide the "SELECT" switch to the USB port labeled Mac/PC. Turn on your Spider amp. Run the Line 6 Updater program. Sign in to your Line 6 User Account. Follow the instructions to update the latest firmware for your amp Note: If you experience a failed update or your amp locks up during boot up, you can hold down the Amp and FX buttons to enter Update Mode. Once it's in Update Mode, attempt the update procedure again.
  6. Kaske

    Helix USB Flash Drive Contents

    Hi everyone, first time here. I just bought Helix and got their USB flash drive. However, the drive seems corrupt, I couldn’t open it neither on Mac OS X nor in Windows. Is there any way I can get the contents from the drive? I don’t want to go back to the store for such a small thing. By the way, this thing is awesome.
  7. This update can be performed with either a PC (on Windows 7 or Windows 8) or with a Mac (on OS X Mountain Lion, Mavericks, or Yosemite). A micro-USB cable (included with G70) is necessary to connect the device to be updated to the computer. Please note that a Line 6 account and password will also be required, in order to download the Updater app and to sign into the Updater app when launched. If you do not already have an account, you can create one at https://line6.com/login.html. Part 1: Installing the Line 6 Updater app: Visit line6.com and sign in using the appropriate account. Go to the downloads page at www.line6.com/software and download the Line 6 Updater app for Mac or Windows. Once the Line 6 Updater app is downloaded, double-click the file to install the app on the computer. You will be guided through the installation process. Once the app is successfully installed, proceed to Part 2 “ Updating a Relay TB516 G Transmitter. Part 2: Updating a Relay TB516 G Transmitter: 1. Launch the Line 6 Updater app. 2. Once the app is launched, enter your appropriate Line 6 username and password, and then click the Sign In button. 3. Connect the micro-USB cable to the computer, and connect the other end to the TB516 G transmitter that is to be updated. It is recommended that there are no batteries in the transmitter for the update process. The first time this step is performed may take up to two minutes, depending on the speed of a user's internet connection, as the machine will attempt to install a driver. Subsequent attempts of this step should occur instantaneously if the same USB port is used on the machine. The Relay TB516 G transmitter should now appear, as below: 4. Click on the Relay TB516 G Transmitter to select it 5. Click on the 'Update' button towards the right, at the very top of the list. 6. Click the 'Continue' button at the upper right 7. Click the 'Accept' button at the upper right. 8. Click the 'Next' button at the lower right of the above screen 9. Please confirm that 'Firmware Version 1.xx' is now displayed in this window. You may now disconnect the Relay TB516 G Transmitter. Click the 'Continue' button and you will be able to connect another device to update, as necessary. * Note: if the update process should fail for any reason during step 8, please try the following: Disconnect the Relay TB516 G from the micro-USB cable. Insert a pair of AA batteries. Power on the transmitter. After 5 seconds, power off the transmitter. Remove the batteries and connect the transmitter to the micro-USB cable as in Step 3 of the update instructions, and continue with the update procedure. Part 3: Updating a Relay G70 Receiver: 1. Launch the Line 6 Updater app (if the app is already open, proceed to the next step). 2. Once the app is launched, enter the appropriate Line 6 username and password, click the 'Sign In' button. You will be brought to the following screen: 3. Connect one end of the micro-USB cable to a USB 2.0 port on the computer (hubs are not supported). 4. With the power switch of the G70 receiver in the '0' (off) position, connect the unit to the other end of the micro-USB cable. 5. Put the power switch of the G70 receiver in the '1' (on) position. The receiver's audio LED should appear solid red and the 'LINE 6' splash screen should appear on the unit's display: * on some USB ports with some computers, it has been observed that the receiver may not remain on the 'LINE 6' screen. Should this happen, please put the power switch back to '0' and then back to 'I' again and repeat this if necessary until the device remains on the 'LINE 6' screen, as above. 6. The Relay G70 Receiver icon should now appear within the app 7. Click on the Relay G70 Receiver to select it 8. Click on the 'Update' button towards the right, at the very top of the list. 9. Click the 'Continue' button at the upper right 10. Click the 'Accept' button at the upper right. 11. Click the 'Next' button at the lower right 12. Please confirm that 'Firmware Version 1.xx' is now displayed in this window. You may now disconnect the receiver. Click the 'Continue' button and you will be able to connect another device to update, as necessary. * Note: if the update process should fail for any reason during step 12, please try the following: Put the Relay G70 Receiver's power switch into the '0' (off) position. Return to Step 5 and continue with the update procedure. If the updating process should fail for any reason, please follow these instructions: For the Relay TB516 G Transmitter: Please disconnect the transmitter from your computer's USB and close the Line 6 Updater app. Insert a pair of batteries into the transmitter. Power the transmitter on and leave it on for at least 5 seconds. Power the transmitter off. Remove the batteries from the transmitter. Reconnect the transmitter to your computer's USB. Launch the Line 6 Updater app again, sign in with your Line 6 username and password, and follow the instructions that appear to update your Relay TB516 G Transmitter. For the Relay G70 Receiver: Please disconnect the G70 receiver from your computer's USB and close the Line 6 Updater app. Reconnect the receiver to your computer's USB and make sure its power switch is in the 'I' (on) position. The receiver should display 'LINE 6' and this should remain on the display. If it does not, please disconnect the G70 receiver and then reconnect it to your computer's USB, so that you see it continues to display 'LINE 6'. In some cases, it is possible that this may take more than one attempt. Once the LINE 6 screen remains displayed on your G70, please launch the Line 6 Updater app again, sign in with your Line 6 username and password, and follow the instructions that appear to update your Relay G70 Receiver.
  8. Here is how to update the Firehawk 1500 step by step: Note: The versions of the drivers and software may have older versions. Make sure to always select the latest versions. For Windows 7, 8, or 10 systems, please start with step 1. For OSX 10.8 and up, skip to step 8. 1. In order for your computer to see the Firehawk 1500 you will need to install the driver for the device to your computer. open a web browser and navigate to line6.com/software and select Product: Firehawk Software: Drivers from the drop down menus at the top of the page. 2. Pick the top selection from the next page by selecting "Get Download". 3. Accept the terms. 4. If in Windows, choose the run option and run the installer or navigate to the downloads window and run the installer. Pressing Control + J will bring up the downloads menu in most windows browsers, alt + command + L for Safari on Mac. 5.Disconnect your Firehawk from the computer if it's connected via USB and run the installer. 6. In the installer make sure the drivers from the Firehawk have a green check. Click next until the installer completes. 7. Reconnect Hardware when prompted and let Windows assign the driver. Now your computer will be able to communicate properly with the Firehawk. 8. Now, lets download the updater utility. Open your web browser, navigate back to line6.com/software and select Line 6 Updater under the software drop down menu. 9. Select get download under the top selection, the latest choice will always be at the top. 10. Accept the agreement. 11. If in Windows, choose the run option and run the installer or navigate to the downloads window and run the installer. Pressing Control + J will bring up the downloads menu in most windows browsers, alt + command + L for Safari on Mac. OIr the installer will be in your downloads folder. 12. Run the installer for Line 6 updater. 13. In the installer make sure Updater has a green check, click next until the installer completes. 14. Run Line 6 updater from the start menu on WIn 7, Applications Folder on a Mac, or C:/Program Files (86)/Line 6 on Windows 8. 15. Accept the agreement. 16. Login to Updater with your username and password from the Line 6 website. 17. Select the Firehawk. 18. Select the latest version of flash memory. This is always the top selection. 19. NOTE: This part of the updater explains how to reset the Firehawk if it should fail. You can refer to the image here for instructions if that should ever happen. Click Next to Proceed. 20. Wait for the progress bar to complete. 21. Updater will let you know when the update is complete.
  9. mtreehugger

    HD 500 stuck on driver 4.2.5.1

    I have tried and re-tried but can't seem to get this done. My laptop runs win7. I've got Monkey at 1.71, updated the USB firmware to 1.04, re-booted both POD and laptop ad nauseum, even turned off my Norton... but whenever Monkey tries to update the FW, it thinks it's successful yet shows the driver at 4.2.5.1. My goal is to get my hd500 from 2.32 to 2.62, but I don't want to even attempt this if I can't even get the drivers to update. Anybody got any ideas? Also, when updating the POD Flash Memory, am I supposed to hold down a nav button and power it on somewhere in the process? THANKS (in advance)!
  10. fattybobillatty

    M13 start up issues.

    My M13 is booting up in a strange way. Only the far left screen is on and it says something like "flash,sd, midi, jacks". Has anyone had this problem?? Please help.
  11. parabolic606

    Reset to factory settings doesn't work

    Hi, I tried to reset my POD HD 500X to it's default factory setting by reinstalling flash memory using Line 6 Monkey (as recommended in the guide). But to no effect, all my input/footswitch settings stays exactly the same as previously. Beside reseting preset banks it seems like it had no effect on the settings of POD at all. I specifically would like to reset Global EQ settings but also few others. I'm using latest drivers for USB etc http://i.imgur.com/tJWODXE.png
  12. Hi mates, got a question. I'm flashing my pocket pod from 1.0 to 1.1. How much time to complete operation? my progress bar is stopped from lot of minutes... on pod i read "loading Update". something is going wrong? can i disconnect the pod? regards Samuel [iTALY]
  13. Here is how to update the Firehawk FX step by step: For Windows 7, 8, or 10 systems, please start with step 1. For OSX 10.8 and up, skip to step 8. 1. In order for your computer to see the Firehawk you will need to install the driver for the device to your computer. open a web browser and navigate to line6.com/software and select Product: Firehawk FX Software: Drivers from the drop down menus at the top of the page. 2. Pick the top selection from the next page by selecting "Get Download". 3. Accept the terms. 4. If in Windows, choose the run option and run the installer or navigate to the downloads window and run the installer. Pressing Control + J will bring up the downloads menu in most windows browsers, alt + command + L for Safari on Mac. 5.Disconnect your Firehawk from the computer if it's connected via USB and run the installer. 6. In the installer make sure the drivers from the Firehawk have a green check. Click next until the installer completes. 7. Reconnect Hardware when prompted and let Windows assign the driver. Now your computer will be able to communicate properly with the Firehawk. Make sure the Firehawk is turned on attempting when this. 8. Now, lets download the updater utility. Open your web browser, navigate back to line6.com/software and select Line 6 Updater under the software drop down menu. 9. Select get download under the top selection: 10. Accept the agreement. 11. If in Windows, choose the run option and run the installer or navigate to the downloads window and run the installer. Pressing Control + J will bring up the downloads menu in most windows browsers, alt + command + L for Safari on Mac. OIr the installer will be in your downloads folder. 12. Run the installer for Line 6 updater. 13. In the installer make sure Updater has a green check, click next until the installer completes. 14. Run Line 6 updater from the start menu on WIn 7, Applications Folder on a Mac, or C:/Program Files (86)/Line 6 on Windows 8. 15. Accept the agreement. 16. Login to Updater with your username and password from the Line 6 website. 17. Select the Firehawk. 18. Select the latest version of flash memory. This is always the top selection. 19. NOTE: This part of the updater explains how to reset the Firehawk if it should fail. You can refer to the image here for instructions if that should ever happen. Click Next to Proceed. 20. Wait for the progress bar to complete. 21. Updater will let you know when the update is complete.
  14. Hello! Upgrading my Amplifi fx100 to 2.10.00, first time (from 1.01.0). Installed Utility, plugged it in USB 3.0 port (Windows 7 64 bit). Launched in firmware update mode. Pressed Next in the update utility. Seeing "Update In Progress. Do not turn off or unplug your device at this time". Progress bar is empty and it's saying "Installing firmware update...". One hour passed with no changes. How to cancel/retry upgrade process without a risk of having entirely broken device?
  15. All 4 tone lights (or ABCD lights on the FX100) flashing is 'recovery mode'. It is the intended behavior after a failed update. If you come across this mode, you must attempt to update the AMPLIFi again. Power down your AMPLIFi. When updating via PC, please connect the USB cable and make sure to boot the unit while holding Tone+Tap (amp, TT) or A+C (FX100) to put your AMPLIFi into Update Mode. Run the Line 6 Updater program found at www.Line6.com/software. For a guide, please refer to http://line6.com/support/page/kb/_/amplifi-products/ampl/how-to-update-amplifi-with-a-pc-r701. If you still get failed updates from the Line 6 Updater, try another USB cable and port as well as another computer When updating via an iOS device, Bluetooth works in recovery mode, but the pairing from before the failed update is not maintained. You must press the Bluetooth button and pair again from the smart device's Bluetooth menu. You can then proceed with the update.
  16. bcolexxx

    M13 firmware update issues

    Hello people! I'm brand new to the Line 6 forums. I'm having a few issues updating the Firmware on my LINE 6 M13. The pedal is awesome (when it works). So everything stopped working and i stopped getting sound out of it. When I hook up my cables, you can hear this buzzing when you turn the overdrive effects on, so there definately is a connection there, but when you plug the guitar in nothing comes through. I have of course tested out all cables and everything. So I did some digging and I am on something like 1.07 firmware, and I need to upgrade to the newest one. I've been following the instructions that I found here (http://line6.com/support/page/kb/_/effects-controllers/m5-m9-m13/m13-firmware-update-instructions-r364) They are easy to follow but still nothing. I've tried it using MIDI-OX utility. I download the Sysex file, and follow it step by step. When I'm in MIDI OX and I send the file through to the unit, my little USB Midi device lights up (it has LEDS for Midi in and Midi out, and the Midi Out is flashing indicating that it's sending midi data through the out cable). My poor old M13 just sits there, on the display it says 'Waiting command' I get all the way to the end sending the Sysex data over, but it looks like the M13 is not recieving it. Just wondering if anyone has had any experience with this and if anyone has successfully done it!
  17. Some people have reported that after a JTV flash upgrade usually to v2.0 or v2.1, that the B and E strings have very low volume levels in comparison to the E,A,B,G strings on some models. Some have reported that a subsequent reflash or two fixed the problem, and others that they had to roll back to v1.9 to obtain models that had balanced string volumes, and finally some dived in to Workbench HD and tweaked the affected models to balance out the string sounds. I recently hit this issue when I upgraded to v2.1 and a subsequent reflash did not fix it, and as I had a gig coming up I had to roll back to v1.9 as a quick way to get back to balanced string volumes as I did not have the time to go in WB HD and manually adjust for the differences. I think It would be very useful to find out why this problem occurs and why it only affects some users and hopefully Line 6 can then fix the problem. So if we can gather plenty of useful data in this thread then we can pass it on to Line 6 to investigate. Please answer the following questions: if you have you ever had E and B strings at very low volume immediately following a flash upgrade? (a) what flash version were you upgrading from and to? ( B) what model JTV were you updating? © were you updating directly via JTV dongle or indirectly through an HD500 or HD500X or other device? (d) how did you fix the problem? (i) reflash firmware? How many times? (ii) tweaked string volumes global and models in Wokbench HD? (iii) roll back to v1.9 or another fw level? (e) have you ever experienced this problem on a fw release earlier than v2.0 and if so, what level was it? (f) which models had the problem? My answers: (a) v1.9 to v2.1 ( B) JTV59 © updated via HD500 (d) attempted 2 reflashes, but then rolled back to v1.9 (e) no (f) T-MOD positions 1,3,5 and SPANK 1 though 5 Thanks in advance for your help and answers.
  18. Good afternoon, I'm a proud owner of a PODxt Live for many years; It worked like a charm until a few weeks ago. Starting from the beginning, a year ago I broke the USB connector; Almost a month ago I decided to finally fix the USB port, so I changed the connector to a new one (I'm experienced with electronics), when I turned on the POD to try out the new USB connector, the POD simply wouldn't start; It flashed all the LED's and maintained them on, a brick with lights basically. The USB works just fine, I can access to the POD via PC but the Flash Memory is just not accessible; I checked every internal part on the POD, all the values are normal and nothing seems to be "broken". Is it possible that anyone can get me the Flash Memory full dump file of a PODxt Live so I can reprogram mine? Sorry for my bad English, Best Regards.
  19. Hello, I recently bought a FBV Shortboard MKII to go with my Spider IV 120. I've connected up to my laptop using the correct cables with the intention of updating the firmware and using Spider Online. However, I downloaded Monkey and tried to update the Flash Memory update for the amp. Every single time I try, I get the following message. "Spider IV 120 update failed. (Code 8000000A) An undefined error occurred. Try the update again making sure the cables are still connected." Now I can't use the amp at all, as it's stuck on a menu saying "Ready to Update." :unsure: I also cannot seem to factory reset the amp at all. I really don't know what to do. PLEASE help anyone?! :(
  20. scruff78

    Dsp Boot Error On My Hd400

    Last weekend, I connected my HD400 to my laptop for the first time in a VERY long time. Line 6 Monkey told me there were updates. So, I figured why the hell not. So, I told them to run. While the update was being performed, Line 6 Monkey popped up an error message saying it had encountered an error and would be shutting down. When the update started, it said that the FULL update should be run uninterrupted so I left the HD400 sit with it saying DOWNLOADING.... for a couple hours. I came back and it was still like that so I assumed that things got messed up and I'd have to start over so I powered it down. Only thing is, now it won't power back up properly. I get a message that says DSP BOOT ERROR then NOTHING!!! I've tried resetting to factory settings. I've tried using different cables, USB ports etc and nothing. Please help. Can someone tell me where to go from here to fix my HD400?
  21. Rokdawg

    Poh Hd500 Flash Update Problems

    Ok, I have had this thing for a few months. I haven't used it much...I also have a DT50 & a Pocket Pod. I can actually use the Pocket Pod live a lot just by running my normal pedals into it like I would an older amp without an fx loop. I decided to record with my HD500 & of course it needed to update. It started to do that LINE6 Loop thing at it's boot up. It wasn't hard to find where someone (many times) tells how to stop it & then, of course, update what needs to be updated. I have updated the Flash countless times using my Line 6 monkey & it wont seem to update. It'll say there's a communication problem with my device. I have used a couple of different USB cables that all work on other devices. So what's the problem & how do i fix it? I was in the middle of an edit & actually seem to have lost my "Bundle." That really sucks because I finally created what I would think is an incredible blend of a "Marshal" & a "Boogie." So...help...please...
  22. Français Deutsch Variax HD is a free firmware upgrade for all James Tyler Variax guitars. Variax HD delivers a world-class collection of HD guitars rebuilt from the ground up using Line 6’s next-generation modeling technology. The team captured more detail than ever before, resulting in unprecedented sonic character and a more natural playing experience. From rare vintage electrics to classic acoustics and exotics, each HD instrument delivers superior articulation and exceptional feel. Q: What are the changes and improvements in the Variax HD firmware update? - HD Guitar and Pickup modeling offer a major evolution of our Variax modeling technology. This advancement improves the playability of the guitars as well as the authenticity of their tone. - Alternate tuning of 12 strings. You can now create your own custom tunings of 12 string instruments and store them in Workbench HD. - With the included Workbench HD software (separate download) you can blend in the magnetic pickup signal into your Variax model. Please see the following Workbench HD knowledge base article for further info. Q: How do I update the James Tyler Variax guitar with this Variax HD firmware? A: In order to install this update, connect your James Tyler Variax guitar to Line 6 Monkey using the Workbench interface included with your JTV or a POD with VDI input. Please go over the following JTV Update knowledge base article for further setup and update instructions for this update. Variax Reflash and Software Update Instructions Q: Can the Variax HD update be installed onto the previous generation Variax guitars (Variax 300, 500, 600, 700)? A: No, this update is ONLY for the James Tyler Variax guitars. Known issues: - Custom patches are not retained when updating to Variax HD. The Variax HD update will replace all of the presets in your Variax with all new HD guitars. Variax HD introduces the new HD preset format to Workbench and the guitar. Be sure to backup any custom presets that you may have for future reference; however, note that Variax 1.X presets will not work with the 2.0 firmware. For a full list of Variax HD models, please visit line6.com. - A seemingly complete update can result in dull/dark audio output on all settings. This can be fixed by performing the update again. For JTV-89 and 89F Customers Only: The five high-gain models that were previously exclusive to the v1.90 JTV-89 and 89F guitars loaded into the Custom 1 Bank are now available to be loaded into the JTV using the Workbench HD software. You can download the custom JTV-89 bank from the following link: Custom JTV-89 Mags Bank Mise à jour du firmware Variax HD: F.A.Q. Variax HD est une mise à niveau gratuite de la firmware pour toutes les guitares James Tyler Variax. Variax HD offre une collection de classe mondiale de guitares HD reconstruit à partir de zéro en utilisant la nouvelle génération de technologie de modélisation Line 6. L'équipe a remporté plus de détails que jamais auparavant, entraînant un caractère sonore sans précédent et une expérience de jeu plus naturel. Des appareils vintage rares aux guitares acoustiques classiques et exotiques, chaque instrument HD offre une articulation supérieure et un toucher exceptionnel. Quels sont les changes et augmentations de la mise à jour firmware Variax HD? La modélisation de guitare et des micros HD offre une évolution de notre technologie de modélisation Variax. Ce progrès améliore jouabilité des guitares ainsi que l'authenticité du ton. Modification alternative de 12 cordes. Vous pouvez créer vos propres accordages personnalisés de 12 cordes instruments et enregistrer les dans Workbench HD. Vous pouvez mélanger le signal du micro magnétique dans votre modèle Variax avec le logiciel Workbench HD (doit être téléchargé séparément.) inclus. Comment est-ce que je peux mettre ma guitare JTV à jour avec ce firmware Variax HD? Pour installer cette mise à jour, vous devez connecter votre guitare James Tyler Variax à Line 6 Monkey en utilisant l'interface Workbench inclus avec la JTV ou un POD avec entrée VDI. Visitez ce lien pour recevoir des instructions de la mise à jour: Instructions du reflash et mise à jour Variax Est-ce que cette mise à jour peut être installée sur les guitares de génération précédente (Variax 300, 500, 600, 700)? Non, cette mise à niveau est uniquement pour les guitares JTV. Problèmes connus: Les patches personnalisés ne sont pas conservés lors de la mise à niveau Variax HD. La mise à jour Variax HD remplace tous les presets dans votre guitare avec nouveaux guitares HD. Variax HD introduit le nouveau format des presets HD pour Workbench et la guitare. Sauvegardez tous vos presets personnalisés mais attention, les presets de Variax 1.x ne fonctionnent plus avec le firmware 2.0. (HD) Pour une liste de tous les modèles Variax HD, visitez: http://fr.line6.com/ Pour les utilisateurs JTV-89 et 89F: Les cinq modèles High-Gain qui étaient exclusives pour les guitares de la version 1.90 JTV-89 et 89F chargés dans "Custom 1" sont maintenant disponibles pour chargement sur votre guitare en utilisant le logiciel Workbench HD. Téléchargez le ici: Custom JTV-89 Mags Bank F.A.Q. zum Variax HD Firmware-Upgrade Variax HD ist ein kostenloses Firmware-Upgrade für alle James Tyler Variax Gitarren. Variax HD liefert eine Sammlung von weltklasse HD Gitarren, die von Grund auf anhand der neusten Line 6 Modeling-Technologie erstellt wurden. Unser Team erfasste dazu mehr Detail als je zuvor, was zu beispielloser Klangcharakteristik und natürlicherer Spielerfahrung führt. Von seltenen Vintage-Instrumenten bis zu klassischen Akustiken und Exoten liefert jedes HD Instrument überragende Artikulation und ein außergewöhnliches Spielgefühl. Was sind die Änderungen und Verbesserungen des Variax HD Updates? HD Gitarren- und Pickupmodelling bieten eine bedeutende Revolution der Variax Modeling-Technologie. Dieser Fortschritt verbessert die Spielbarkeit der Gitarren sowie die Echtheit des erzeugten Klangs. Alternative Abstimmung der Saiten. Sie können jetzt Ihre eigene Abstimmung für 12 Saiteninstrumente erstellen und diese in Workbench HD abspeichern. Mit der enthaltenen Workbench HD Software (separater Download nötig) können Sie die magnetischen Pickup-Signale in Ihr Variax Modell mischen. Bitte schauen Sie sich dazu folgenden Workbench HD Artikel an: Wie kann ich die JTV Gitarre mit der Variax HD Firmware aktualisieren? Um das Update durchzuführen, verbinden Sie Ihre JTV Gitarre mit Ihrem Computer anhand der Workbench Schnittstelle, welches bei der JTV oder einem POD mit VDI Eingang mitgeliefert wurde, und starten Sie Line 6 Monkey. Nutzen Sie dann den folgenden Artikel für weitere Anleitung zur Installation: Anweisungen zu Reflash und Software Update der Variax Kann das Variax HD Update auf auf älteren Variax Gitarren installiert werden? (Variax 300, 500, 600 oder 700) Nein, das Update ist ausschließlich für JTV Gitarren. Bekannte Fehler: Individuelle Patches werden nicht beibehalten, wenn Sie das Update durchführen. Das Variax HD Upgrade ersetzt alle Presets auf Ihrer Gitarre mit neuen HD Gitarren-Modellen. Variax HD führt das neue HD Preset-Format für Workbench und Ihre Gitarre ein. Sichern Sie sich alle Presets vorher ab, die Sie behalten wollen aber Achtung, Variax 1.x Presets werden nicht mehr mit der 2.0 Firmware funktionieren. Für eine vollständige Liste aller Variax HD Modelle besuchen Sie bitte http://de.line6.com/ Für JTV-89 und 89F Nutzer: Die fünf exklusiven High-Gain Modelle die vorher auf der v1.90 JTV 89 und 89F in auf "Custom 1" geladen waren sind nun per Workbench HD Software für Ihre Gitarre erhältlich. Sie können diese hier herunterladen: Custom JTV-89 Mags Bank
  23. Version française. Deutsche version. DT25/DT50 FIRMWARE INSTALLATION INSTRUCTIONS NEEDED: A MIDI interface that connects to your computer via USB (download the current Driver for it if you don't have it installed) 2 MIDI cables (or a MIDI interface such as the M-Audio Uno that comes with attached MIDI cables, not: this interface must have it's own set of Midi drivers) NOTE: Line 6 recommends a name brand USB to MIDI interface produced by an audio company that supports/updates their drivers. Good choices include: M-Audio, Edirol, E-Mu and MOTU. These interfaces have proven to be more robust and reliable when it comes to large MIDI transfers such as the DT25 and DT50 update. Latest version of Line 6 Monkey installed. Download and install the Line 6 Monkey software here. Procedure Connect your MIDI interface to your computer via USB cable. Connect the DT25/DT50 MIDI Out to your MIDI interface In, and connect the DT25/DT50 MIDI In to your MIDI interface Out. Launch the Line 6 Monkey with the DT25/DT50 connected via the MIDI interface and powered on. Select the Flash Memory line item and click the Update Selection button to install the flash memory update into the DT25/DT50. The device will receive the firmware data and the unit will be updated to the latest Firmware. ***If the firmware update fails and you are having trouble reconnecting to Line 6 Monkey, please try putting the unit into SAFE MODE before starting up and connecting to the Line 6 Monkey software. To do this, hold the channel select switch down to 'Channel B' and power on the DT amplifier while holding this switch down. Let go of the switch after 10 seconds or so, then re-start Line 6 Monkey and follow the steps above to update/re-install the flash memory. Instructions d’installation du firmware DT 25 et DT 50 Vous avez besoin de : Une interface MIDI qui connecte à votre PC via USB (téléchargez le pilote le plus récent pour cette interface) 2 câbles MIDI (ou une interface MIDI comme le M-Audio Uno avec des câbles attachés.) Attention une interface USB à MIDI de marque d’un fabriquant audio connu comme M-Audio, Edirol, E-Mu ou MOTU est recommandé. Ces interfaces sont plus robustes et fiables pour les transfers larges comme des mises à jour. Installez la version la plus récente de Line 6 Monkey. Téléchargez le ici : http://fr.line6.com/software/ Procédure : Connectez votre interface MIDI à votre câble USB. Connectez la sortie MIDI du D25/D50 à l’entrée de votre interface MIDI et connectez l’entrée MIDI du DT25/DT50 à la sortie MIDI de l’interface MIDI. Lancez Line 6 Monkey avec le DT25/DT50 connecté et allumez le. Cliquez Flash Memory et Update Selection pour installer la mise à jour sur le DT25/DT50. La mise à jour est maintenant effectuée. Si vous avez des problèmes avec la mise à jour ou avec la reconnexion de l’appareil au Line 6 Monkey, essayez le SAFE MODE avant vous l’allumez et connectez au logiciel Line 6 Monkey. Maintenez Channel Select sur la position Channel B et allumez l’ampli DT en maintenant ce commutateur. Lâchez le commutateur après 10 secondes et redémarrez Line 6 Monkey. Essayez de faire la mise à jour encore une fois. Anleitung zur DT25/DT50 Firmware Installation: Benötigt: Eine MIDI Schnittstelle, welche Sie an Ihren PC anschließen können. (laden Sie sich bitte den neusten Treiber für das Gerät herunter. Achtung, Line 6 empfiehlt eine MIDI Schnittstelle eines Marken-Audio Herstellers, da diese regelmäßig Treiberupdates bekommen. Marken wie M-Audio Uno, Edirol, E-Mu und MOTU. Diese Schnittstellen haben erwiesen, dass sie robuster und zuverlässig sind bei großen MIDI Dantentransferen wie die DT25 un DT50 Aktualisierungen. Die neueste Version der Line 6 Workbench. Herunterladen können Sie Monkey hier. Verfahren: Verbinden Sie die MIDI Schnittstelle über USB mit Ihrem Computer. Verbinden Sie den MIDI Ausgang des DT25 oder DT50 mit dem Eingang der MIDI Schnittstelle und den MIDI Ausgang der Schnittstelle mit dem Eingang des DT25/DT50. Starten Sie Line 6 Monkey während das DT25/DR50 vie MIDI an Ihren Computer angeschlossen ist. Wählen Sie Flash Memory dann Update Selection um das Update zu installieren. Das Gerät wird nun die erforderlichen Informationen laden und sich selbst aktualisieren. Achtung, sollte die Aktualisierung fehlschlagen und Sie müssen Line 6 Monkey wieder neu verbinden, dann solten Sie versuchen das DT25/DT50 im Safe Mode zu starten. Bevor Sie es nun wieder starten, halten Sie den Channel Select und starten Sie Line 6 Monkey. Starten Sie das Gerät neu während der Knopf in Richtung Channel B gedrückt ist Lassen Sie dann den Knopf nach ca. 10 Sekunden wieder los und starten Sie Line 6 Monkey. Folgen Sie dann nocheinmal die Anleitung zur Firmware-Installation
  24. Update Instructions: All Spider Valve Mk II 112, 212 and HD100 amplifiers can be updated using an FBV MkII Express, FBV MkII Shortboard, or via MIDI with a USB to MIDI interface as follows: Connect your FBV MkII to your Spider Valve MKII using a standard FBV cable. Connect your FBV MkII to your computer using a standard USB cable. Launch Line 6 Monkey on your computer. Select your Spider Valve MKII as the connected device if it isn't automatically selected. Select the Flash Memory line item and click "Update Selection". Please also refer to the following FAQ for further update details: http://line6.com/support/page/articles/_/amplifiers/spider-ivspider-online/updating-the-spider-iv-75-120-150-150hd-us-r319 ***Please note: You MUST register your Spider Valve Mk II amp, and the FBV MkII Express or FBV Shortboard MkII in order to proceed with the update. Updating Note: Updating firmware does not erase User Presets. To return the amp to its factory settings, which includes restoring original User Presets and Amp Model Defaults, press the "A" Channel button on power up, then press the "Presets" encoder.
  25. Deutsche Version Version française Please go through the following checklist before updating the flash memory of your Variax guitar to ensure the update completes successfully: Ensure that the interface you are using to update the Variax with (Workbench Interface, PODxt Live/Pro, POD X3 Live/Pro, POD HD500/HD Pro, Vetta II) is NOT connected to the computer through a USB hub. Make sure to connect the interface into a USB port directly into the computer, especially into the back of a desktop. If problems persist, make sure to test all of the USB ports on the computer. Avoid plugging into USB ports found on keyboards, monitors, or laptop docks. [*]When using the Workbench Interface to update or edit the Variax guitar, ensure that a charged battery is in the guitar and a 1/4" TS mono cable is inserted into the guitar's output jack, or that the stereo TRS cable is plugged into the Variax providing power from the XPS power supply to power on the guitar. [*]On a James Tyler Variax guitar, ensure that the Volume knob on the guitar is NOT set to the '0' position as it will put the guitar into Power Save Mode. Make sure that the Volume knob is set higher than 0 when updating or editing the JTV guitar. [*]Please use the VDI Cable that comes with the JTV guitar when updating the flash memory on that guitar. Avoid using VDI or CAT5 cables longer than 10 ft. in length when updating any Variax guitar. [*]During the update, select 'NO' when asked if you would like to keep the presets on the guitar. Use the Workbench software to back up your guitar presets before updating if you would like to keep them. [*]Close out any other applications running on your computer before updating the Variax guitar. Q: How do I update or re-install the flash memory on my Variax Electric 300, 500, 600, 700, James Tyler Variax, and Shuriken guitars? A: These instruments can only be returned to factory reset by reinstalling the flash memory. You will need to connect your Variax to the workbench software using your Variax enabled hardware (i.e. Variax Hardware interface, POD XT/X3 Live, POD X3 Pro, VETTA with VDI, or POD HD500), then you will have to connect your interface to your computer via USB. Once the guitar and interface are connected to the computer, you will need to run Line 6 Monkey. See the following link for more information on connecting your device to your computer and installing Line 6 Monkey: Line 6 Monkey Installation and F.A.Q. USB Connectivity with Line 6 Devices Once you have Monkey installed and your computer is recognizing the connection, see the screen shots for the reflash procedure: 1) Once you run Line 6 Monkey, Monkey may ask you to register. If you do not wish to register (or have already registered) select "remind me later". 2) If you want to reinstall the factory presets (or update the firmware), select "Flash Memory" the select "Reinstall Latest" 3) Select "OK" to agree to the software license 4) Select "yes" or "no" If you want to keep the patches on the instrument 5) Select "Yes" to continue with the update. Do not disconnect the variax during the update. 6) Line 6 Monkey will reinitialize the device and update the flash memory. You can watch the progress on the blue bar on the right side of Monkey. 7) Once the update is complete you will need to select "OK" to continue. Variax Bass 700/705 Reflash Factory defaults must be restored one at a time. Select the Model you wish to normalize, the place the blend and two tone controls in the detent (center) position. Now press the Model select pot down until the indicator light stops flashing. The Model should now be restored to factory settings. Use this procedure for any model you want to restore to the factory setting. The Variax bass series can also be "reflashed" using the procedure for the Variax electric guitars described above. Anweisungen zu Reflash und Software Update der Variax Bitte folgen Sie dieser Checkliste bevor Sie die Flash Memory Firmware Ihrer Variax Gitarre aktualisieren um sicher zu stellen, dass ein Update erfolgreich installiert werden kann: Stellen Sie sicher, dass die Schnittstelle, welche Sie zum aktualisieren Ihrer JTV benutzen (Workbench Interface, PODxt Live/Pro, POD X3 Live/Pro, POD HD500/HD Pro, Vetta II) nicht per USB Hub an Ihren Computer angeschlossen ist. Stecken Sie die Schnittstelle hinten direkt in einen der USB Ports Ihres Computers. Wenn weiterhin Probleme bestehen sollten Sie alle USB Ports ausprobieren. Achtung, vermeiden Sie es, die Schnittstelle in einen USB Port einer Tastatur, eines Monitors oder eines Laptop-Docks zu stecken. [*]Wenn Sie das Workbench Interface benutzen, um Ihre JTV zu bearbeiten oder aktualisieren, stellen Sie sicher, dass die Batterie vollgeladen und ein 6.35mm TS Mono Kabel im Gitarren Ausgangs-Jack eingesteckt ist, um die Gitarre anzuschalten. [*]Der "Volume" Knopf darf nicht auf der "0" Position sein, da die Gitarre ansonsten in den Energiesparmodus geht. Der "Volume" Knopf muss also auf einer anderen Position sein als "0" um die Aktualisierung durchzuführen. [*]Bitte benutzen Sie das VDI Kabel, welches bei der Gitarre mitgeliefert wurde wenn Sie Flash Memory aktualisieren möchten. Benutzen Sie möglichste keine CAT 5 oder VDI Kabel, die länger als 3 Meter sind wenn Sie die James Tyler Variax aktualisieren. [*]Während der Aktualisierung klicken Sie "NO" wenn Sie gefragt werden ob Sie die Presets behalten möchten. Sie sollten die Presets, die Sie behalten wollen vor dem Update per Workbench Software sichern. [*]Schließen Sie alle unnötigen Programme bevor Sie die JTV Gitarre aktualisieren. Wie kann ich Flash Memory auf meiner Variax Electric 300, 500, 600, 700 oder James Tyler Variax Gitarre aktualisieren oder neuinstallieren? Diese Instrumente können ausschließlich per Neuinstallation von Flash Memory auf Ihre Werkseinstellungen zurückgesetzt werden. Dazu müssen Sie zuerst Ihre Variax via USB-Schnittstelle (Variax Hardware Interface, POD XT/X3 Live, POD X3 Pro, Vetta mit VDI oder POD HD500) mit Ihrem Computer verbinden. Wenn Gitarre und Schnittstelle dann an den Computer angeschlossen sind, starten Sie Line 6 Monkey. Klicken Sie für weitere Informationen über die Verbindung Ihrer Schnittstelle an den Computer auf die folgenden Links: Line 6 Monkey Installation and F.A.Q. USB Connectivity with Line 6 Devices Wenn Monkey installiert ist und Ihr Computer die Verbindung erkannt hat, folgen Sie den nachstehenden Anweisungen zum Reflash: 1. Wenn Monkey startet, Monkey fragt Sie vielleicht sich zu registrieren. Wenn Sie sich nicht registrieren wollen oder bereits registriert sind, klicken Sie "Remind me Later". 2. Wenn Sie die Werks-Presets neuinstallieren (bzw. die Firmware aktualisieren) wollen, wählen Sie "Flash Memory" aus und drücken Sie auf "Reinstall Latest". 3. Klicken Sie "OK" um der Software Lizenz zuzustimmen. 4. Klicken Sie "Ja" oder "Nein" jenachdem ob Sie die Patches auf Ihrem Instrument behalten wollen. 5. Klicken Sie "Ja" um das Update zu starten. Trennen Sie die Variax auf keinen Fall während der Aktualisierung vom Computer. 6. Line 6 Monkey wird nun das Gerät zurücksetzen und Flash Memory aktualisieren. Rechts können Sie an dem blauen Balken sehen, wie weit das Update ist. 7. Nach dem Update müssen Sie auf "OK" drücken. Variax Bass 700/705 Reflash: Bei diesen Gitarren müssen die Werkseinstellungen einzeln zurückgesetzt werden. Wählen Sie das Modell aus, welches Sie zurücksetzen wollen, den "Place", "Blend" und zwei Tonbedienungen der mittleren Position. Klicken Sie nun den Model Select Knopf nach unten bis das Anzeigelicht aufhört zu blinken. Das Modell sollte nun zurückgesetzt sein auf die Werkseinstellung. Benutzten Sie diesen Vorgang für jedes Modell, welches Sie auf Werkseinstellung wiederherstellen wollen. Die Variax Bass Serie kann außerdem "reflasht" werden indem man die Methode der Variax Electric Gitarren benutzt, wie oben beschrieben. Instructions du reflash et mise à jour Variax Suivez cette liste de contrôle avant de mettre à jour la firmware Flash Memory de votre guitare Variax pour être sûr qu'une mise à jour peut-être installé avec succès: Assurez-vous que l'interface pour connecter la guitare JTV à l'ordinateur (Workbench Interface, PODxt Live/Pro, POD X3 Live/Pro, POD HD500/HD Pro, Vetta II) n'est pas connectée à l'ordinateur via un hub USB. Connectez l'interface directement sur un port USB en arrière de l'ordinateur. Si vous avez des problèmes, essayez tous les ports USB de l'ordinateur. Évitez de brancher sur les ports USB sur les claviers, moniteurs ou stations d'accueil pour ordinateur portable. [*]Si vous utilisez l'interface Workbench pour mettre à jour la guitare, assurez-vous qu'une batterie chargée est dans la guitare et un câble TS mono 6.35mm est branché dans le jack de sortie de la guitare pour l'allumer. [*]Le bouton Volume ne doit pas être sur la position "0" parce que ca met la guitare dans le mode économie d'énergie. Mettez-le sur une autre position que "0". [*]Veuillez utiliser le câble VDI fourni avec la guitare JTV si vous mettez le Flash Memory (firmware de la guitare) à jour. Évitez d'utiliser des câbles CAT5/VDI plus long que 3 mètres pour la mise à jour. [*]Pendant la mise à jour, cliquez sur "NO" pour la question "keep presets on the guitar". Utilisez le logiciel Workbench pour sauvegarder vos presets avant que vous mettez la firmware à jour si vous les voulez garder. [*]Fermez tous les autres programmes inutiles avant que vous mettez la JTV à jour. Comment est-ce que je peux réinstaller ou mettre à jour le Flash Memory de ma guitare Variax Electric 300, 500, 600, 700 ou James Tyler Variax? Ces instruments peuvent seulement être réinitialisés sur les paramètres d'usine en réinstallant Flash Memory. Pour réinstaller Flash Memory, vous avez besoin de connecter votre guitare via interface (Variax Hardware Interface, POD XT/X3 Live, POD X3 Pro, Vetta avec VDI ou POD HD500) USB à votre ordinateur. Si guitare et interface sont connectées à l'ordinateur, démarrez Line 6 Monkey. Pour plus d'informations sur la connexion d'une interface à l'ordinateur, cliquez les liens ci-après: Line 6 Monkey Installation and F.A.Q. USB Connectivity with Line 6 Devices Si Monkey est installé et votre ordinateur a reconnu la connexion, suivez ces instructions pour un reflash: 1. Quand Monkey a lancé, le logiciel vous demande éventuellement à registrer, si vous ne voulez pas enregistrer ou vous êtes déjà enregistré, vous devez cliquer "Remind me Later". 2. Si vous voulez réinitialiser les presets d'usine (= mettre à jour le firmware) choisissez "Flash Memory" et cliquez "Reinstall Latest". 3. Cliquez "OK" si vous êtes d'accord avec la licence du logiciel. 4. Cliquez "Oui" ou "Non" si vous voulez ou voulez pas garder les Patches sur votre instrument. 5. Cliquez "Oui" pour lancer la mise à jour. Déconnectez votre guitare jamais pendant la mise à jour. 6. Line 6 Monkey réinitialise l'appareil et mets à jour la Flash Memory. À droite, vous pouvez voir la barre bleue pour voir le progrès. 7. Après la mise à jour, vous devez cliquer "OK". Reflash de la Variax Bass 700/705: Pour ces guitares, vous devez réinitialiser les paramètres d'usine individuellement. Choisissez le modèle, que vous voulez réinitialiser, le "Place", "Blend" et deux configurations de ton des positions en milieu. Cliquez sur le bouton "Model Select" jusqu'à ce que la lumière cesse de clignoter. Le modèle doit maintenant être réinitialisé. Répétez cette méthode pour les autres modèles que vous voulez réinitialiser. La série Variax Bass peut également être "reflashé" en utilisant la méthode des guitares Variax Electric, comme décrit au-dessus.
×