Search the Community
Showing results for tags 'helix lt 4cm'.
Found 3 results
-
Hey, guys I'm just getting back into guitar after a 5 year break and to celebrate my return I picked up a Helix LT which will be here this week sometime. Before I quit playing, the extent of my effects usage was just plugging a pedal chain into the front input of my amp and calling it good. Now that the LT is on its way, I want to be sure I can run a proper effects loop on my tube amp and not fry any of my electronics. After watching a number of videos on the 4CM setup, I think I have the right idea with the cables and for keeping input/output levels proper for good tone. I was hoping someone could check my work on this, so I know that I understand what I am doing. Cables 1. Instrument cable from (output on guitar) to (guitar input on the LT) 2. Instrument cable from (send 1 on LT) to (guitar input of amp) 3. Instrument cable from (effects loop send on amp) to (return 2 on the LT) 4. Instrument cable from (1/4" output on LT) to (effects loop return on amp) 5. Speaker cable from (speaker out on amp) to (speaker cabinet input) Global Settings on Helix Output: 1/4" set to line level Send/Return 1: Set to instrument level Send/Return 2: Set to line level Send/Return 3/4 & XLR Output: Irrelevant to current setup. If you have any input, hot tips, or see any mistakes here please let me know. Thanks in advance, Feanor -
Hello everyone I am the owner of a Helix LT that I use in 4CM mode with my amp head. I use the single EXT output to change the channel of my head. When I change the channel via the helix, the light changes between EXP 1 and EXP2, so I had to assign two volume pedals at the beginning of the signal (one for each channel of the head). But when I change snapshot (and head channel), pedal 2 goes to 0%. I put a video that shows the problem. It seems that this is only present on the LT since the original Helix has a dedicated output for the channel change. Has anyone encountered this problem before? Thanks a lot to all. IMG_3112.mp4
-
Hi! I Have a Tubemaister 36 combo and a Line 6 Helix LT. I've tried to connect them Via 4CM (plus a MIDI cable) so I can control de amp channels of the Tubemaister with the Helix (Via MIDI because it´s the only way to change channels on the amp). I know I'm must be doing something wrong because I just simply can't! Yes...I have seen tutorials on YouTube...and here where I'm standing right now: Besides all the connections of the cables (and the amp set in series mode), The Helix signal path is: Guitar in, Chorus, Pitch whammy, Distortion, SEND AND RETURN, a pre amp, Delay and a Reverb. If I disengage the series mode on the back of the amp I cannot hear the reverb and the delay... Somebody can help me? In advance thank you for your time and patience! I´m getting frustrated here!
