Search the Community
Showing results for tags 'helix'.
-
Hey all. Just got a helix and still learning it, probably for some time. Got it mainly for church with guitar and found out it has great bass tones as well. I would like to use it live but unsure if it’s capable of doing like my current rig. I’ve searched the manual and forums to no avail. My band goes ampless with in ears. I use a MB 800+ preamp with two xlr outs on it, to the mixer. One is set pre effects to FOH and post effects to in ears. I can adjust all gig long if necessary without affecting FOH. Are the xlr’s out of the helix capable of this? I see no pre/post selectors on the helix itself and find nothing in the settings to do this. Is the helix post only and if I change on the helix it also changes FOH? If so then I’ll stay with my current setup. Thanks.
- 13 replies
-
Hi everyone! First of all, I am from Argentina, sorry for my english. Here is my problem: I have purchased a Helix Floor the last week. Everything was going OK with the product until I tried to connect the pedal to my desktop PC (Windows 10) using the USB output with the aim of edit my presets easily (its a little bit tedious to do it manually having the possibility to do if from my PC). The problem is I am not able to do anything using my PC because as soon as I connect the USB cable, the OS says "DRIVER IS UNAVAILABLE"... that is, HELIX appears in my SETTINGS as a KEYBOARD but with that legend below (DRIVER IS UNAVAILABLE). Has anyone has the same problem in the past? As far as I know, my Helix has the last Firmware installed (3.11.0), so, thats not the problem as I read in several topics. Thanks a lot to everyone!!! GABRIEL
-
I'm trying to update my helix floor from 2.8 to firmware 3.11. I have updated HX Edit to the latest version. HX and it notifies me that there is an update for helix. I follow the prompts and it always ends in the following error message: HX Edit Failed to download firmware update file. Please check your Internet connection and try again. Unknown Error code -2004 I'm not having any Internet connection problem including with other line 6 applications. In fact, the emergency is that I have driven a long way to get to a good Internet connection so that I wouldn't have any problem with that… But since there seems to be some problem, Is there a manual workaround if the automatic update procedure is not working for some reason? OK, so the emergency is over… I just sat here and did it a couple hundred times until it figured out how to do the download correctly. I also swapped out mechanisms like the USB cable etc. The topic is still important to me though in case I ever run into this again :-) Any answers would be greatly appreciated regarding how to manually do what HX Edit it does automatically for me, but cannot always do for some reason.
- 3 replies
-
- hx edit
- firmware update
-
(and 1 more)
Tagged with:
-
Muy buenas, hace poco me compré una shuriken y ahora estoy pensando en sustituir mi ampli engl invader por una Helix , con idea de cambiar los sonidos de la variax , efectos y ampli desde un botón. Pero tengo la duda de cómo hacer en directo, porque para estar en casa o ensayando el cable que viene con la variax de unos dos metros me vale, pero para directo no puedo estar encima de la pedalera, necesito moverme por el escenario. Alguno tenéis está combinación y tocáis en directo? Hay cables largos? Como hacéis? Ojalá alguno pueda darme una solución. Gracias!
-
Is there a way on the helix floor to make it go back to stomp mode after you change banks when you are in 10 stomp mode. The way it works now is when I am in 10 stomp mode, to change presets, I have to hit "mode" which shows the bank up and down on button 1,7... then hit bank up (or down)... and then select the preset. It then shows the snapshots (and banks) instead of going back to stomp mode. I have to click mode again to get to stomp mode.... I have to hit 4 buttons just to change presets when I am in 10 stomp mode. It works like I want when in 8 stomp mode, but not 10 stomp mode. Is there a way around this? If not, is there a way to swap the mode button 6, with the tap tuner button 12? that would help. thanks.
-
Can someone tell me/show me how to get Billy Sheehans tone from this video or from the song "addicted to that rush." All help will be much appreciated!!!
- 1 reply
-
- billiy sheehan
- mr big
-
(and 7 more)
Tagged with:
-
Hello All, I'm new to Helix and I've spent a little time playing with the Helix (with firmware 3.11) as a USB audio interface attached to my Mac M1 mini (running macOS Big Sur 11.4). All is well when I stick to a sample rate of 48000kHz but I would like to able to change the sample rate, so I tried to install the Line 6 Helix Driver (1.1.0.) for Mac, which says it should allow sample rates of 44.1kHz, and 96kHz. However, although the driver seems to install ok (the .kext file appears in the /LIbrary/Extensions folder), the Helix Audio device does not allow me to change the sample rate. Has anyone else encountered this problem and has found a way around it? Maybe I'm best to just record from the analog outs to my Mac via my existing interface. Thanks for any help, Dave
-
Wireless MIDI Controllers for IOS - AUGUST 2021 UPDATES! https://line6.com/support/forum/96-promote-your-patches/ Based on the new MIDI implementation from Firmware 3.10 Includes SAVE button (All models) Includes MODE button (Helix Floor, Helix LT, Helix Rack, HX Effects) Includes VIEW button (Helix LT, HX Stomp) Helix Floor/Rack (main view) Helix LT (main view) NEW layout! included with the HELIX Floor/Rack layout HX Stomp (main view) HX Effects (main view)
-
Hey, long time, first time :) So I really vibe with modern hard rock tones. Specifically I love the live sound of the (now defunct) band, Santa Cruz....specifically Johnny Cruz's tone. To my ear, it's f'n perfect. His cleans, rhythm and leads just are exactly what I'm looking for. Any suggestions on where to start crafting this type of tone? I know there are tons of options, but looking for some general ideas on where to begin. Ty all in advance!
-
Hi, I use a (Hardware-) Helix for all my recordings and especially the way of "recording dry and processing afterwards" (with Helix Native) works fine - but only for the source Guitar-In (USB-7). I recently tried to do the same with a mic-signal and expected the unprocessed signal being available on USB-8 but I have no opportunity to select the source "USB-8" in my DAW (Cubase 10 on Mac Catalina). A deeper look in the Studio Setup of Cubase reveals, that only the Inputs 1, 2 ,7 and Outputs 1,2 are marked active, the remaining ports are shown as "Inactive" (and I cannot alter the state in "Studio Setup" of Cubase). In Global Settings of Helix "Re-amp Source" points to USB-8 and is assigned to "Mic", which imho should be correct. So, any idea how to switch the "Inactive" ports to "Active"? Thanks in advance ;-)
-
First, I'm venting... very sorry! I have a helix lt, with a PC 212+ and a PC 112+. I was going to use the 212 for bigger gigs and the 112 for smaller gigs and practice. I have had line 6 stuff since the pod 2.0 and have loved everything. played for years with a dt25 and HD500x. The Dt25 was flakey, but sounded great when it worked. I got a helix right before covid, so I have only used it out maybe 6 times. I just got the PC's a few months ago and have used them 3 or 4 times. I play a little bit of everything, but the really heavy stuff (that scares me :)) I will go back and forth between stacking the cabs, leaning both cabs back, or just using one of the two. I play (mainly fiddle with settings) for at least 2 to 3 hours everynight... really. I heard about the HF problem, so I saved a new patch on each PC called PTB Raw. I was using the LF Raw. I play a Les Paul, tele, and a yamaha ES 2??? (hollow body electric with soapboxes).... It was sounding great. I just got back from out of town, and it sounds like the speakers are blown, (I don't think they are)..... it sound horrible. I tried all 3 guitars, tried one or both of the PC's, tried using different speaker models on the PC, going back to LF Raw.... all sound very brittle and very harsh... especially with the cabs leaned back (I know I am getting a more direct hit from the speaker then) One other thing.... I have ALWAYS used the ampeg 1x15 cab..... even going into the LF Raw. That was sounding nice and smooth last week. This is probably a different discussion, but the 1x15 cab is the only way I could smooth out the helix. I tried all the cabs, and they all sounded too brittle. Ok, so some one tell which button to press to make it sound good again :) .... as I said, I'm venting :0 thanks for getting this far!
-
Forgive my noobness here. I have searched high and low on YouTube and have read the manual (pg. 56) for the Helix LT. So I am reaching out for help for the very first time on here. All I want to do is track my usual XLR out signal into my DAW via inputs 1/2, while also having a dry signal recorded as well. The issue I am having is, when I select input 7, no signal is coming through. My current set up is a UAD Apollo Twin with an 8 pre Scarlett coming in via ADAT. I have my in and out in Logic set to my UAD Apollo. I can not for the life of my figure out how to set the input on a track to receive the USB 7 signal. My output of the helix is set to Multi, and my ramp source is set to USB 7. Thank you!
- 1 reply
-
- helix
- dry signal
-
(and 1 more)
Tagged with:
-
I don’t know if anyone else has mentioned this, but I run my guitar into a external wah then into the helix and one of the analog outs goes into a fender twin reverb reissue, everyone knows this is a loud amp but with the helix in front I can run it a bit hotter and use the volume on helix to tame it to bedroom levels! I know better not to use cab sims with a real amp but with how clean the twin is, I find I get great representations of various amps using the pre blocks as a gain stage pedal. I know this is all obvious, but it’s like finding the toothpick in your Swiss Army knife.
-
Not so long ago, I began to notice that I don't like the sound of helix. The main problem is that the signal does not seem to be hot enough. It's like the volume on the guitar is slightly lowered. And everything was fine before, but I don't remember what update this problem started with. I tried different guitars (prs sc250, esp horizon with emg), tried turning on/off the PAD button, tried resetting to factory settings. Tell me what the problem may be, otherwise I have already broken my brain) I forgot to say that I play through studio monitors, but it also sounds the same when recording
-
Hi all! I recently purchased the Helix Floor and cannot get it to communicate with my 2020 MacBook Pro that is running Big Sur 11.4. I made my line6 account, registered my Helix, confirmed my email...all that stuff. I've downloaded and installed the driver, license manager, updater and HX Edit. When i first plugged in my helix to the USB via a hub to my thunderbolt 3 port and installed software, i had to press 'allow' in System Preferences > Security & Privacy. It then instructed me to restart my comp, and after doing that it doesn't detect my Helix AT ALL on any software. PLEASE HELP! I contacted support and have looked into unblocking the driver with this link: http://line6.com/support/page/kb/_/recording/computer-audio-set-up-and-troubleshooting/macos-high-sierra-1013-driver-installation-change-r879 I have ensured via 'Disabled Software' that the driver isn't disabled by the system. I have also opened a ticket with support but haven't heard back for a handful of days so thought i'd try my luck here. Hopefully will hear back from them soon! I can't update it or anything and can't find a similar issue in the forums. Am i missing a download or something? The only anomaly I can find is the serial number for my Mac in 'About this mac' is different to the one in the License Manager. I cannot find a way to change this and it fills it automatically. Any help would be very much appreciated.
-
Hello all! just a quick one, my guitarist uses a pedal baby with a cab, should he use a pre-amp block without the BIAS settings, or a full amp block? I think the Pedal baby is a class-AB solid state? I might be answering my own question, but I reckon the pedal baby wants a mic level signal... the full amps are line? And the BIAS settings are emulating how much an amp pushes back on the signal... so as the PDBB is an amplifier... it already has its own behavioural characteristics? Looking for what’s correct, not a “if it sounds great it is great” #winky emoji Thanks everyone.
-
I’ve been thinking about getting a Shuriken and Helix LT, but given it’s been a few years since they were released I was curious if there is any product refresh coming that I should wait for. I know there are frequent software updates, but curious if any hardware updates are inbound. thanks!
-
I have noticed that when using Helix as audio interface with Reaper that if I shut off the Helix while Reaper is still running, that the computer goes to a blue screen, and says something about a fatal error and starts gathering info to send to Microsoft. Then the computer does a complete restart. I haven't tried shutting down Reaper first but it's still odd behavior. Anyone else experience this? It's a Windows 10 computer. The only other thing that could be mixed up in this is the fact that I have two sets of speakers. One set is XLR from the Helix and the other set is computer speakers from the RCA jack on back of PC. So there are Realtek drivers for the computer speakers and Helix drivers for the Focal monitors. One other thing here that might help some users with a different issue. I noticed loud crack or pop sounds from my new Focal monitors that almost scared me out of my chair the first few times. I thought I might damage the monitors. Turns out that Realtek standard driver appears to have a power down function to save power if the speaker is not used for a period of time. This also happened on my computer monitors but less noticeable. If you don't use any audio for about 3-5 minutes power is cut and then re-ingaged when you start a video or start playiing.....So through Dell I found that there is a high definition driver from Realtek that doesn't have this problem plus he installed Max Audio Pro to manage the audio connections which may or may not help. I have also disabled power saving on USB ports as an after thought because sometimes when I walk away from the computer for longer periods and come back to Reaper and Helix, the connection is broken and HX EDit doesn't work nor does Reaper if I remember correctly. I also think that Microsoft updates can screw up the driver configuration I have now...so watch for that....if needed.
- 1 reply
-
- helix
- computer blue screen
-
(and 1 more)
Tagged with:
-
Today I bought my helix and when I opened it up the presets were listed 000, 001, 002 etc. however, after updating the soft wear, the presets are now listed 01A, 01B, 01C etc. I was wondering how I can change it back to the original listing? I find it odd why I have to group my presets in groups of four. Thanks.
-
Hi All, I made 2 backups prior to updating the flash firmware using HXEdit 3.11. After flashing my helix, I hled down 8-9 and asked it to do a resotre to defualts as per the instuctions. no issue. I then tried to load in my backup and it stops rebuilding on preset 267. (I waited 30 mins to see if it would go past) If I turn the unit off and then on again, it skips this and continues on until the next preset it doesn't like (523), and stops there. If i do the same thing, it skips over it and stops at (524) and so on and so forth. I made 3 backups of my settings. 1 before upgrade on 3.10, 1 after going to hxedit 3.11 and one during the update of the helix process using HXEdit 3.11 None of my backups are rebuilding. Any ideas??? My last upgrade to 3.10 restored no issue for that firmware, this one however, 3.11, refuses to rebuild.
-
Hi, i'm trying to control the channel switching on my Mark V via the Helix Effects instant blocks. I've figured out the function in general and the switching itself is working properly ( tip+ring for the wanted channel). The only problem i'm having is excessive humming (mind i already have two gates in my signal chain). I have seen a similar problem in this forum before, but the thread is some years old now. Does anyone know if there is a proper solution or are there just workarounds with external components? kind regards and thank you in advance olli
-
Okay, let me first say, I have plenty of common sense and I could easily infer a conclusion that has high probability of being accurate. Actually, I already do have an assumption that I'm pretty sure is reflective of the fact. But I dont know it to be a fact so I'm only looking for the people who know the facts, i.e. cite me a source or give me directions where I can find the information cause I've look and quite frankly, this is not my area of expertise so I dont know what is marketing BS phrasing to sell an item cause it leads people to believe 2 things are the same when in fact they are not vs statements of factual reference. So the question is, are the fx in the POD go the same exact algorithms and scrip as Helix FX or Not? Either they are or they are not. So if you have to add some bit of information, clarify or say "Yes, But..." Then for my purposes, thats a no. And actually truth be told, all I want is a yes or no. Cause if the answer is they are the same, then thats all I need to know. But if the answer is no, then I will go do the research myself. I dont mind trying to find out the information. but looking for something that possibly doesn't exist would mean a lot of wasted time if they are the same. Unfortunately, no offense to anyone here but the trolls, we all know they exists and the fact I have said I'll continue the research if I'm told no they are not the same means I I have to have a reason from you as to why you would say that just cause I dont trust anyone and I dont wanna waste my time doing research cause some guy, kid i mean, parents hate him. I dont know if they beat him, but they dont love him so he then find joy is infecting the world with negative troll energy! Sorry, everyone pays the price for that. Its like I dont during a storm thinking every bolt of lighting is the one that was suppose to kill me. But I also dont carry a metal umbrella around holding it up so that on homicidal bolt of lighting knows where the easy kill is. Let me just end by saying as heavy handed as this comment is, it is no where close to accurately being a reflection of this community. cause 99% of the people here are awesome dude who are great guitarist, or even better, new guitarists who dont care about how they sound today, they keep practicing cause they know tomorrow they will play something they are proud of. I know thats most people here. But thats all I needed, 2 sentences and 99% of the people get it. Some troll is still not gonna get the fact that I know they are out there, and I'm more than happy to embarrass you. But without this, then when I'm a lollipop in return, doesnt that just make me a troll too? But I've laid out the rules of the game, so I take no issue in treating anyone like a POS if thats how they wanna be treated. Everyone else gets respect and should someone say something profound out side of anything I considered, well, I'll let you know the day that happens. but i do say thank you to people who correct any information that I have got wrong. I could care less about winning arguments, all I want is to leave a conversation with the most accurate information we can figure out together that accurate. This is my first comment in this group, and thats why this is detailed. Cause I'll keep this so people can reference the fact I dont change my tune and should I say anything that conflicts with what I've stated today, I'd expect to be held accountable. So not that I've said what I've had to say, I wont have to say it again and lets get on with business!
-
Hi everyone; I use HELIX NATIVE it on my Mac (with Logic Pro X) and it's like a year old, I installed it when i bought the Helix Floorboard. Is is it worth UPDRADING my HELIX NATIVE SOFTWARE??!! Will I lose the Preset Sounds I use/ have on my Logic Projects? Any guidance appreciated and thanks!