Search the Community
Showing results for tags 'help'.
-
I absolutely love the L6 Helix. It is amazing. I have no regrets about this system at all. However, here is something I reeeeally wish I could do, but I am not sure the Helix can do it. I would pay good money to have it as an option. In the global settings you have to choose whether your device runs all presets, presets/snapshots, snapshots/stomp, all stomp, all snapshots, etc etc etc. However. I wish I could set in the Global settings a combination of as many as I want. For example. I love having lots of snapshots available, but I also like the option of having a boost available when I want it. What if I could have 7 snapshots and 1 stomp which could be a Kinky Boost? That would be amazing! It would also be killer if I could make that choice global, but also have it preset specific. i wish I could have presets that could have any combination of stomps and snapshots. How difficult would this be to add in a future update? It would blow my mind and make this a flawless device (PLUS ADD MORE DSP!). Regardless, I obviously can make-do, but damn. That would be awesome.
-
Greetings, If anyone happens to know the correct answer to this question, I'd greatly appreciate hearing from you. It would be nice knowing whether or not Version 1.05 also contained Versions 1.01 - 1.04. I own the Spider V 30 and use the Line 6 Updater (although you've probably seen it ... the image is attached) to keep it up to date. While I realize each update states: 'it is highly recommended that all Line 6 users perform this update' it just seems a little odd. Because the Line 6 Updater shows updates dating back to 9/2016 and I could be wrong, but I'm pretty sure in 2016 the Spider V 30 either wasn't ready for the market or it was still on the Line 6 'to do' list. Could I blindly do exactly as it states? Absolutely! Will I blindly do exactly as it states? No However, if I followed the directions then later discovered I only needed to install the most recent version (meaning I'd been wasting time following outdated instructions) I'd have no other recourse than to buy a bazooka and find whoever was supposed to update the updater. I'm joking about the bazooka of course, but nobody in their right mind enjoys someone wasting their time. Thanks in advance for any assistance ... Take it easy, Jim
-
I was wondering, what equipment is required to get tones which were downloaded from a computer into the Floor Pod Plus? I’ve been looking and have not been able to find a straight answer for this.
- 4 replies
-
- floor pod plus
- midi
-
(and 3 more)
Tagged with:
-
So I managed to get my set-up working on my laptop but I cant get it to work on my desktop. I have a Line 6 GX, I have Pod Farm 2 installed and updated with drivers from Line 6 Monkey, and its all authorized by the the license manager. No models are showing up however, and its not detecting any input from my hardware. Any Ideas? I fixed the input issues but I still have zero models despite having some on my other computer.
-
I've got a Line 6 Spider V 240HC with the matching 412 cab, and an FBV Express MKII foot controller. Im trying to figure out how to save certain amps to certain Letter Pedals. Like save cowboys from hell to a (or whichever) and save something clean, like acoustic rhythm, to another letter pedal, like b (or whichever) to where when im playing a show, i dont have to go back to my amp and switch from heavy to clean, especially when its quick changes in songs that cant be dragged out. Help is very much appreciated.
-
Hello All, I just bought a new MacBook Pro using Mac OS High Sierra. I downloaded Line 6 Monkey Edit. When I try to connect to my computer a window pops up telling me that my Pod HD 500X is not detected or connected however it is. Whats Wrong? I tried restarting.
-
So, today I bought the Amplifi 75w, took it home, and realized I needed that special cord to update it (I'm using android). So I went out picked one up, and I downloaded Amplify Utility, and I go through all the steps to update my amp, but it sits at the "Installing Firmware update" with 0% of the bar filling up? I've tried factory resetting my amp, and deleting the drivers, and Amplifier Utility and reinstalling it all, and still nothing, can anybody recommend anysteps? Getting a little frustrated.
-
Hey, I have a problem with my line 6 POD HD PRO X. I work in Reaper, when I use Line 6 it pops up to me Blue Screen (BSOD) it is terribly annoying and makes it very difficult to work. I tested this problem on: Focusrite 18i20, focusrite Solo, M - Audio ProFire 2626 and there was no problem. The problem only appears on Line 6, I do not know what is causing ... I also exchanged RAM memory but it is still the same Please, help me : c
- 4 replies
-
- line 6 pod hd pro x
- problem
- (and 4 more)
-
Hello all, As a completely new user and member in this community, I apologize in case my question was already answered as I couldn't find useful information. I was playing around in the Helix Native, to organize a specific sound I am going for in taste, by using some 3-rd party IR's. What have bothered me and can't understand how and if able to fix, but when I am using for example the OwnHammer IR's or any other IR's, they work fine inside Helix's IR loader. However recently I managed to capture a particular old record of mine, that I really like how it came out in the final guitar mix (particular room, mics used etc) and I made my own custom IR. That IR can work just fine in any other IR loader (i.e. Recabinet 5 or NadIR). For some reason when I load the same custom IR into Helix Native, no matter if I select 1024 or 2048 and scroll down to the .wav file itself and I try to play it or listen to the already recorded guitar track in my DAW, there is no sound at all :( I tried playing around with the settings of the Helix IR's, but the sound will come only if I turn it off and leave the raw amp head emulation without any cabinet IR. That really pisses me off as now I can't use it for rehearsals or live gigs. Any suggestions how I may fix it? In case, that you wonder how I created my custom IR (if that eventually may help to figure to issue): The way I created my IR is: Track "A" is the original guitar sound I wanted to capture. Track "B" was the same played with Helix without any cabs/IR's. Captured solo channel from A track and used Voxengo Curve EQ, captured it as reference, then the B track on 2nd layer, applied it over the "A track" and muted both GIT channels, select solo mode on the 3-rd track (test sound generated via Voxengo deconvolver), going right in the Stereo Out channel with the applied EQ and converted the final IR file. Thanks in advance, Alex
-
So for the last couple hours I have been setting up my new AT2035 with my new Line 6 UX2, but so far I have installed everything I need to install, I have the XLR cable in the right spot and the USB connected in the back. But no sound comes through, almost like the mic isnt even on. AND YES I have tried switching from "instrument" to "mic 1 or 2" still nothing. I am running out of ideas at this point.. PLEASE HELP! UPDATE! I have gotten PODFarm to actually pick up my sound, BUT NOW whenever I talk into my mic it is just straight static and nothing else.
- 2 replies
-
- audio technica
- at2035
-
(and 9 more)
Tagged with:
-
So i have recently have had a strange bug. When i am gaming, when ever i join a party or someone joins my party my mic audio makes it sound way deeper than it was. It's like a switch almost. The instant someone joins or i join them it just make me sound like i have a "voice changer" on. If anyone can help me with this that would be great, but i just find it quite odd none the less.
-
Hey y'all, sorry if this is a repost, I've searched for this info a bunch of times. Here's what I want to do: Using Helix Floor (2.5.0 - can update it if this will fix it) Use one of the vibe effects (Vibe Rotary in my case) No Wah or Volume effects on this patch Use the expression pedal to control the Slow Speed & Fast Speed params Use the expression pedal toe switch to change the Speed param between Slow and Fast mode For the life of me I can't figure out exactly how to do this. I've gotten as far as getting EXP1 and EXP2 to control the Slow Speed & Fast Speed, but I can't get the toe switch to change the actual Speed param from Slow to Fast. I tried using MIDI CC Toggle in the Command Center as well but I am not sure I was doing it correctly. Is this possible?
- 8 replies
-
- helix
- toe switch
-
(and 3 more)
Tagged with:
-
Hi, I've been searching everywhere but I can't seem to find an answer for this problem that I'm having, I really hope someone can shed some light on this. I've been having some trouble with my UX2, I should preface this by saying everything's working properly outside of the fact, input levels are normal, it's reading a normal output level, etc. So, my problem is that when I plug my headphones into the headphone jack (through adapters, yes) fully, the sound is so quiet and only really comes through the left speaker. When I plug in the headphones about 3/4 of the way in, they work perfectly fine like they used to. I suppose I could just record like this, but I'm worried that this may not be accurate sound, and I'd just like the sanctity of mind to know that I'm hearing accurate playback. Can someone please fill me in on what's going on, if this is a hardware issue, a jack issue, if this is a huge problem or not. Thank you.
- 3 replies
-
- troubleshooting
- line 6
-
(and 3 more)
Tagged with:
-
Hello to everybody, I’m thinking about buying the M20D(maybe used if I get a super deal), and switch my band setup from analog to digital, mainly for ease of setup, our situation is pretty typical (drum bass guitars voice and a few sequence), so we will be using always the same scene, with small adjustments regarding the venue or a few guests. I already checked how this mixer works and I think it can do everything we need in a nice package, but I’m here to ask for help, since I tried it once and it was super cool, but it isn't mine so I cannot check every feature, so please I will be glad if any expert user could tell me if I’m gettin’ it right or not. For live use I will need a complete channel strip for the Singer, so eq-compressor-deesser-(enhancer)-reverb, independent from other channels. For drums, eq for all channels and compressor for overhead kick and maybe snare. For guitars and bass, eq. For main out, limiter and eq. Can I do everything with integrated efx in the M20D without linking external units? For Home studio use, I understand it can do as an USB audio interface for windows 10 machines, so I can sell my focusrite Scarlett and Motu 8pre and link the Line6 with Cubase with the same functionality, right? Or I can use it only to record live performance on SD or usb cards? We are afraid to loose a little bit of quality since now we are using an Allen Heat Zed22fx which is a great analog mixer, but I’m confident that with an integrated digital mixer I can balance things much more precisely. Please feel free to comment, you will help me join the community of Line6users.
- 4 replies
-
- line6
- stagescape
-
(and 2 more)
Tagged with:
-
Hello I have a Pod HD 300 which is wonderful the sound is very good and makes me very happy . when I use Line 6 Monkey to be able to use the footswitch for the computer HD Pod 300 Caught with white display and now no sound .. I do not know what to do need help .. this happened in the flash memory but does not hear power outage or shutdown and the source. ( Sorry for the English translator google ) Hello I have a Pod HD 300 which is wonderful the sound is very good and makes me very happy . when I use Line 6 Monkey to be able to use the footswitch for the computer HD Pod 300 Caught with white display and now no sound .. I do not know what to do need help .. this happened in the flash memory but does not hear power outage or shutdown and the source. ( Sorry for the English translator google )
- 2 replies
-
- pod hd 300
- flash memory
-
(and 3 more)
Tagged with:
-
Hey. SO i baught a Variax Standard summer 2016 and so far ive been quite happy with it (i only use it for homestudio work), yesterday the guitar just sort of died while i was recording something (lost sound and signal), i had charged the battery the day before which made it weird, but anyways i just plugged it in the charger hoping that would fix it. Well, its now been blinking for 17 hours straight and when i put it in the guitar the back lights up then dies imidiately..As the batteries are kind of expensive (too me atleast) i want to make sure before i end up buying a new one.. SO i seem to remember that the variax is still playable without the battery but that to access the different models you have to have battery, but when i plug in the guitar (with or without the battery) the guitar makes NO sound at all, and acording to my daw its like its not even plugged in..Is my guitar ruined?? OR is it "just" my battery?? Please help a Norwegian out :) Edit: Also tried pressing the round flush black button next to the lights, it lights up all four for about 2 seconds then they all go black..
- 8 replies
-
- variax standard
- battery
-
(and 1 more)
Tagged with:
-
Hey, I just bought an epiphone les paul jr, and spider classic 15 amp. 'm looking just to do some covers for fun, but can't seem to get the Blink 182 sound, looking to do a dammit cover. Anyone who knows if getting this sound is possible on this amp? So many presets. Thanks so much!
-
Hello, Friends My Helix screen stop working and only show sequence of funny colors and pattern changes every 1s. Everything work well but the screen. Anyone else having this problem? How can I fix it?
-
Just curious if there's any way to see an effect's current BPM in the scribble strip. The name is nice but I'd love to use that space for some more pertinent info. If not, is there a way to see BPM without leaning down and touching the tap button? Thanks.
-
- hx effects
- help
-
(and 2 more)
Tagged with:
-
Hi guys and gals! I have a Pod hd500x and I'm looking to lighten up my live gear. Before I was using an engl powerball and engl 4x12 and had the pod as effects, but the music that we play requires me to switch a bunch and with channel selecting on the amp and effect switching on the pod it got really crazy sometimes. So now I'm using the pod as pretty much my main tone (amp sim, cab sim, effects, etc.). I've since gotten rid of the engl as it was redundant to have the head, and the cab is a pain to lug around. So my question is does anyone have some recommendations for cabinets? If possible I wanna have a 2x12 with some power. Thanks!
-
So I know that similiar problems have been posted here in recently, but none of the fixes work for me. I recently got the POD studio UX2, and installed POD farm 2.5 on my PC, along with all the necessary drivers (line6 monkey and the hardware driver) and registration steps. Unfortunately, I am still not able to get the interface/software to pick up my guitar. I have both my recording and playback devices set to the interface, selected "instrument" on the POD farm input menu, have the UX2 selected in the hardware preferences tab, and my guitar/cable works through an amp. The interface is lit up (yellow/orange lights on), but the dials don't move at all. I also noticed that I am unable to hear any other sounds from my computer (youtube/Spotify), so I am not sure if this helps isolate the issue. At this point I have no idea what to do and am considering opening up a ticket. Does anyone have any advice? Thanks
-
Hi all Im very new the world of wireless. Recently bought the Relay G90 and ive jamming with it for a few months and a couple of local shows with it and it worked a dream. Only problem i have now is, i had my first international support with it and the headlining band was using wireless systems aswell. My wireless was cutting in and out during sound test and i had to use a guitar cable in. Can anyone provide any help on why this would happen and how to fix it. The G90 runs off 2.4ghz digital wireless system as im sure most of you are aware. Im not sure the exact system the headlining band was using.