Please ensure Javascript is enabled for purposes of website accessibility Jump to content

Search the Community

Showing results for tags 'led'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Forums

  • Community Support
    • Multi-Effects Units
    • Variax Instruments
    • Amplifiers
    • Computer Based Recording
    • Live Sound
    • Pedals/Controllers
    • Dream Rig - Line 6 Product Integration
  • General Discussion
    • Tone Discussion
    • Line 6 Lounge

Categories

  • General FAQ
    • Operating System-specific Information
  • Tutorial Videos
  • Effects/Controllers
    • HELIX/HX
    • DL4 MkII Stompbox Modeler
    • FBV Controllers (MKII / 3)
    • M5
  • Amplifiers
    • Powercab
    • Catalyst
    • Spider V
  • POD
    • POD Go
    • Pocket POD
    • POD Express
  • Guitars
    • JTV / Shuriken / Variax Standard / Workbench HD
  • Relay/XD-V Digital Wireless
  • Recording
    • Helix Native
    • Metallurgy
    • Echo Farm/Amp Farm
    • POD Farm 1/2.0/2.5
    • Computer Audio Set Up and Troubleshooting
  • Legacy Products
    • POD
    • Amps
    • 1st Gen Variax Guitars / Bass / Workbench
    • Effects and Controllers
    • AMPLIFi Series
    • Live Sound
    • Digital Wireless
    • Mobile Products
    • POD Studio / Tone Port / GuitarPort
    • Software
    • Dream Rig

Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Joined

  • Start

    End


Group


AIM


MSN


Website URL


ICQ


Yahoo


Jabber


Skype


Location


Interests


Registered Products

Found 19 results

  1. We recently saw a few cases where after updating a G10TII transmitter, it became non-operational. We believe the root cause is this: Line 6 Updater 1.19 unexpectedly identifies G10TII devices as G10T devices. Due to this, it is possible that one could load G10T firmware 1.06 on a G10TII product. If one ever gets into a state where they incorrectly load G10T firmware onto a G10TII, as described above, the issue can be remedied by downloading and installing the latest Line 6 Updater (version 1.20 or later – the latest version is now 1.23) and using it to re-update the G10TII back to the G10TII firmware. As of this writing, the only G10TII firmware release is the initial public firmware (2.00.0). NOTE: If the G10TII does not appear in Line 6 Updater after a few seconds, try un-docking/re-docking the unit a few times to see if it might then be recognized.
  2. Relay G10TII Information Important Information About the G10TII Transmitter · The recommended charging temperature range of the G10TII transmitter is specified as 50° F to 86° F (10° C to 30° C). · The recommended operating temperature range of the G10TII transmitter is specified as 32° F to 122° F (0° C to 50° C). · Line 6 recommends charging the G10TII transmitter at least every 6 months, based on best practices for lithium-ion batteries. · G10TII LED behavior is as follows: G10TII Transmitter (Docked in G10/G10S Receiver, POD Go Wireless, Spider V amp or THR10II/THR30II/THR30IIA Wireless amp)* LED State Condition Red (slow flash) Charging, less than 30 minutes battery time remaining † Green (slow flash) Charging, more than 30 minutes battery time remaining Green (solid) Fully charged ‡ Dim Red/Pink, may turn off G10TII is not docked properly – Try un-docking and re-docking 5-10 times Red (three quick flashes, repeating) G10T charging has stopped due to exceeding supported temperature. Charging will resume after 5 minutes at 50° F to 86° F (10° C to 30° C) § Orange (solid) Docked and connected to Mac or PC, firmware update in progress Off Receiver not powered (transmitter enters sleep mode after 4 minutes if receiver power is disconnected) G10TII Transmitter (Connected to Instrument) LED State Condition Green (solid) Transmitting, more than 30 minutes battery time remaining Red (slow flash) Transmitting, less than 30 minutes battery time remaining Off Connected to an instrument but not enough battery to transmit ‖ or Removed from instrument *When the G10TII is docked in a receiver or Relay-Ready device, the G10TII LED initially indicates amber, red, or green, depending on its current battery state. This is followed by four flashes (red) as the device initializes. Once this completes, the G10TII LED proceeds to indicate its remaining battery time. † All values stated for amount of battery time remaining are approximate, and the exact amount of battery time remaining when an LED state is indicated may vary slightly between charges. When the G10TII flashes red, it may have up to 60 minutes of battery time remaining. ‡ If the G10TII reaches a full charge (solid green) and remains docked, the G10TII LED may eventually flash green again. This is expected behavior as the G10TII may discharge slightly after reaching a full charge, and its LED may then flash green until it again reaches a full charge. § If the charging lockout indication continues for over 10 minutes, please stop charging and try again in a cooler environment condition. ‖ When the G10TII has insufficient power to transmit, its LED may indicate a pattern of five quick red flashes when connected to an instrument and audio is detected. This is the expected behavior. G10 Receiver (G10TII Transmitter docked) LED State Condition White (solid) G10TII charging or fully charged White (flicker) System has auto-scanned and is changing its channel Red (flash) G10TII not docked properly – Try undocking and redocking Pink (pulse) Connected to Mac or PC, Line 6 Updater open Pink (solid) Connected to Mac or PC, firmware update in progress Off No power to receiver G10 Receiver (G10TII Transmitter un-docked) LED State Condition White (solid) G10TII transmission received, more than 30 minutes of runtime Red (slow flash) G10TII transmission received, less than 30 minutes of runtime White (pulse) Receiver on but no G10TII transmission received White (flicker) G10TII transmission dropout (RF mute) Off No power to receiver G10S Receiver (G10TII Transmitter docked) LED State Condition Battery LEDs Green (cycle 1-2-3) G10TII charging 3 Green LEDs (solid) G10TII fully charged RF LEDs 3 Red LEDs (solid) More than 75% interference (not usable) 2 Red LEDs (solid) 50% interference (usable, but only for short range) 1 Red LED (solid) 25% interference (usable, also indicates G10S power on) Battery LEDs Off RF LEDs On Battery LEDs – Off RF LEDs – Red (cycle 3-2-1) G10TII not docked properly – Try undocking and redocking Battery LEDs – Off RF LEDs – 3 Red LEDs (solid) Connected to Mac or PC, Line 6 Updater open All LEDs Off No power to receiver G10S Receiver (G10TII Transmitter un-docked) LED State Condition Battery LEDs 3 Green LEDs (solid) G10TII transmission received, more than 4.5 hours of runtime* 2 Green LEDs (solid) G10TII transmission received, more than 3 hours of runtime 1 Green LED (solid) G10TII transmission received, more than 1.5 hours of runtime 1 Red LED (solid) G10TII transmission received, more than 30 minutes of runtime 1 Red LED (flash) G10TII transmission received, less than 30 minutes of runtime RF LEDs 3 Green LEDs (solid) G10TII transmission received, good signal strength 2 Green LEDs (solid) G10TII transmission received, average signal strength 1 Green LED (solid) G10TII transmission received, poor signal strength 3 Red LEDs (solid) No G10TII transmission received, more than 75% interference (not usable) 2 Red LEDs (solid) No G10TII transmission received, 50% interference (usable, but only for short range) 1 Red LED (solid) No G10TII transmission received, 25% interference (usable, also indicates G10S power on) Red (cycle 3-2-1) G10S channel knob has been changed from its setting since G10TII was last docked All LEDs off No power to receiver * All values stated for amount of battery time remaining are approximate, and the exact amount of battery time remaining when a LED state is indicated on the G10S receiver may vary slightly between charges of the G10TII Transmitter.
  3. Hi Line 6 Users, I have the POD GO and I am slowly learning how to use it... I am using an expression pedal with it so I can use both the Wah and Volume feature... does anyone know if there is a way to have the EXP LED turn on and off depending on whether you have the effect on or off? For example, when using the WAH, the LED is on when activated but off when deactivated? This happens automatically on my Spider IV when using the FVB Shortboard MKII but I can't work it out for the POD GO Many thanks
  4. Important Information About the G10T Transmitter · The recommended charging temperature range of the G10T Transmitter is specified as 50° F to 86° F (10° C to 30° C). · The recommended operating temperature range of the G10T transmitter is specified as 32° F to 122° F (0° C to 50° C). · Line 6 recommends charging the G10T transmitter at least every 6 months, based on best practices for lithium-ion batteries. · The functionality for Yamaha THR10II Wireless and THR30II Wireless users to update the G10T to version 1.06 firmware is also available. · For G10T transmitters on firmware version 1.06, LED behavior is now as follows: G10T Transmitter (Docked in G10/G10S Receiver, POD Go Wireless, Spider V amp or THR10II/THR30II/THR30IIA Wireless amp) LED State Condition Red (slow flash) Charging, less than 30 minutes battery time remaining * Green (slow flash) Charging, more than 30 minutes battery time remaining * Green (solid) Fully charged † Dim Red/Pink, may turn off G10T is not docked properly – Try un-docking and re-docking 5-10 times Red (three quick flashes, repeating) G10T charging has stopped due to exceeding supported temperature. Charging will resume after 5 minutes at 50° F to 86° F (10° C to 30° C) ‡ Orange (solid) Docked and connected to Mac or PC, firmware update in progress Off Receiver not powered (G10T enters sleep mode after 4 minutes if receiver power is disconnected) G10T Transmitter (Connected to Instrument) LED State Condition Green (solid) Transmitting, more than 30 minutes battery time remaining Red (slow flash) Transmitting, less than 30 minutes battery time remaining Off Connected to an instrument but not enough battery to transmit § or Removed from instrument * All values stated for amount of battery time remaining are approximate, and the exact amount of battery time remaining when an LED state is indicated may vary slightly between charges. When the G10T flashes red, it may have up to 60 minutes of battery time remaining. † If the G10T reaches a full charge (solid green) and remains docked, the G10T LED may eventually flash green again. This is expected behavior as the G10T may discharge slightly after reaching a full charge, and its LED may then flash green until it again reaches a full charge. ‡ If the charging lockout indication continues for over 10 minutes, please stop charging and try again in a cooler environment condition. § When the G10T has insufficient power to transmit, its LED may indicate a pattern of five quick red flashes when connected to an instrument and audio is detected. This is expected behavior. G10 Receiver (G10T Transmitter docked) LED State Condition White (solid) G10T charging or fully charged White (flicker) System has auto-scanned and is changing its channel Red (flash) G10T not docked properly – Try undocking and redocking Pink (pulse) Connected to Mac or PC, Line 6 Updater open Pink (solid) Connected to Mac or PC, firmware update in progress Off No power to receiver G10 Receiver (G10T Transmitter un-docked) LED State Condition White (solid) G10T transmission received, more than 30 minutes of runtime Red (slow flash) G10T transmission received, less than 30 minutes of runtime White (pulse) Receiver on but no G10T transmission received White (flicker) G10T transmission dropout (RF mute) Off No power to receiver G10S Receiver (G10T Transmitter docked) LED State Condition Battery LEDs Green (cycle 1-2-3) G10T charging 3 Green LEDs (solid) G10T fully charged RF LEDs 3 Red LEDs (solid) More than 75% interference (not usable) 2 Red LEDs (solid) 50% interference (usable, but only for short range) 1 Red LED (solid) 25% interference (usable, also indicates G10S power on) Battery LEDs Off RF LEDs On Battery LEDs – Off RF LEDs – Red (cycle 3-2-1) G10T not docked properly – Try undocking and redocking Battery LEDs – Off RF LEDs – 3 Red LEDs (solid) Connected to Mac or PC, Line 6 Updater open All LEDs Off No power to receiver G10S Receiver (G10T Transmitter un-docked) LED State Condition Battery LEDs 3 Green LEDs (solid) G10T transmission received, more than 4.5 hours of runtime 2 Green LEDs (solid) G10T transmission received, more than 3 hours of runtime 1 Green LED (solid) G10T transmission received, more than 1.5 hours of runtime 1 Red LED (solid) G10T transmission received, more than 30 minutes of runtime 1 Red LED (flash) G10T transmission received, less than 30 minutes of runtime RF LEDs 3 Green LEDs (solid) G10T transmission received, good signal strength 2 Green LEDs (solid) G10T transmission received, average signal strength 1 Green LED (solid) G10T transmission received, poor signal strength 3 Red LEDs (solid) No G10T transmission received, more than 75% interference (not usable) 2 Red LEDs (solid) No G10T transmission received, 50% interference (usable, but only for short range) 1 Red LED (solid) No G10T transmission received, 25% interference (usable, also indicates G10S power on) Red (cycle 3-2-1) G10S channel knob has been changed from its setting since G10T was last docked All LEDs off No power to receiver
  5. Can someone PLEASE give me info on replacement/replacing LED lights in my HD147? Everything I google is old info from years ago, and my Line6 Support Ticket was blown off with a canned response that didn't asnswer anything...
  6. Skips

    HX STOMP LEDs

    Hey People, I just recently purchased an HX STOMP. I have been watching loads of videos on how to create presets and such. One in particular which caught my attention was this one: He assignes his settings to SNAPSHOT 1 and 2 and upon doing so, the switch lights on his HX STOMP change colour. I have tried this and unfortunately my lights are just white and this is only when the switch is selected, when a switch is not selected the lights are off. Any Idea what I've done wrong? I feel as though I followed the video correctly. Thanks
  7. The tap tempo on my hx effects and the flashing red light don't seem to be synchronised. For example, if I set the tempo to 60 bpm, the delay is exactly in time with my watch but the red flashing light is is faster than 60 flashes per minute. Is this normal? Is there anyway I can fix this? I'd like to use the light as a guide but as it is, it's kind of useless.
  8. Hi all, Having a bit of a problem :) All my Line 6 gear has the very latest firmware updates installed. I have a Spider IV 75W amp, FBV Express Mk II foot controller and a PODxt. The FBV Express Mk II foot controller works fine with the Spider IV amp and everything switches as it should. BUT when plugging the FBV Express Mk II foot controller into the PODxt it successfully switches channels within a bank BUT there is no LED indication on the foot pedal as to which channel has been selected. Also, the tuner facility isn't called up and in fact the tuner display only illuminates briefly when plugging in, and from then on is blank! Finally, plugging the FBV Express Mk II back into the Spider IV amp and it all works OK - including the tuner facility and the tuner display on the pedal. I'm wondering, if there is a particular combination of firmware for each product I should be looking for and using?? Has anyone succeeded in making the FBV Express Mk II and the PODxt work successfully with each other - and if so what versions of firmware are you running? Oh, I've swopped the CAT5 lead and also calibrated the swell pedal itself but it makes no difference :) Here's hoping anyone can comment!
  9. Hey All, I have set up a patch to control a live looping app on my iPad via MIDI. It uses MIDI CC messages to trigger functions in the app. All works great there! However, I have the LEDs color coded to functions so i can identify them quickly, but the LEDs are always in the DIM state unless I am stomping on the switch. Is there any way to set the LEDs to always be lit fully? It would be very handy to be able to do. Thanks!
  10. I purchased the FBV 3 for use with the Line 6 Amplifi series. I have the Amplifi TT and added the FBV 3 to added foot control functionality. The device works GREAT with the exception of the use of the LED capabilities. The description by Line 6 is misleading in that the LED color functionality only works with a couple of their devices. Line 6 notes this in the ultra small print "Assignable color LEDs available for use with Firehawk 1500 & Spider V only". I am not impressed. Does anyone have insight into when this makes it's way to the top of the list? Cheers!
  11. Hi, I've had my G30 for almost a year. Recently I've been experiencing signal loss from the transmitter during gigs...not good. The LED's on the transmitter go off completely, and what I have to do is shake it around, press the battery door, open it, close it, whatever I have to do until eventually it comes back on again. It must be something to do with the battery compartment/connection issue. I've tried using elastic bands around it to try and keep the door firmly closed but that didn't seem to work. Everytime I've replaced batteries I have opened and closed the door the correct way by using the clip. This is really frustrating because it is happening at every gig now, and is really embarrassing especially when it happens during important guitar parts. I bought it from Thomann.de, so before I return it I want to see if people have had the same problem and if they rectified it? Or if there is something I am overlooking. Thanks, Dave.
  12. Hi there Line6 Community, I'm having a first time issue with my Line 6 LD175 Bass Amp. I've owned now 2nd hand for 4 Years with Zero issues when last night at rehearsal it started making a popping sound randomly (for 20 seconds) then it shut down. When you turn the unit back on it quickly cycles, flickers then the LED's go out. The amp doesn't produce any sound or anything (just the odd crack or pop). I pulled the chassis out just to have a quick look to see if it was something obvious but I couldn't see anything other than I noticed when you power the unit it and it goes out the Transformer starts making a loud continuous hum? Could it need a transformer replacement? I've factory rebooted it with zero success. I have a quick 30 second video to show you if you need. Any guru's out there who can pinpoint the issue or suggest the problem would be greatly appreciated! Thanks,
  13. G10T/G10TII LED States: Transmitter Green when in guitar: On Red flashing when in guitar: Less than 30 minutes battery life left Green when docked: Fully charged Green flashing when docked: Charging Red flashing when docked: Less than 30 minutes battery life left and charging Receiver White solid: On and connected to G10 transmitter OR charging docked G10 transmitter White flashing: No signal from G10 transmitter Red flashing: Less than 30 minutes battery life left on a transmitter that is in use and transmitting, and not for a transmitter that is docked/charging. It is possible that the receiver's LED halo will flash red under other conditions, such as if the transmitter is not properly docked. Q: What is different between the original G10T and the new G10TII transmitters? A: The most obvious difference may be that the original G10T is black in color, while the new G10TII is dark grey. The new G10TII also incorporates new battery management technology, resulting in up to 7 hours of runtime and 170 hours of standby time, compared with the original G10T on the latest version 1.06 firmware, with up to 6 hours of runtime and 150 hours of standby time. Additionally, the new G10TII is electrically compatible with instruments using active pickups and preamps, without the need for an adapter. Q: My G10T/G10TII transmitter was fully charged, but my G10S is now at a single red LED and I have not played for very long. What happened? A: If, after a full charge, the LEDs drop to a single red LED sooner than expected, the transmitter may continue to operate for a number of hours, depending on the condition of the battery. While variation exists between batteries, a red blinking LED will generally indicate 30 minutes or less of play time. Q. Why is my docked transmitter flashing green when I know it's fully charged? A. Once a transmitter reaches full charge when docked, the transmitter will begin to discharge at a trickle. Eventually, the transmitter will dip down to a threshold at which it charges again. At that point, the LED may begin to flash, indicating charging. This could be noticeable for a few seconds, or potentially longer, depending on the condition of the battery. Just as there will be variation from unit to unit with regard to battery performance, you may observe the interval at which that flashing occurs may vary from unit to unit. Transmitters that have been through many cycles or that have problematic batteries could have a diminished performance and might now be much closer to dipping down into that threshold when they trickle upon full charge, which could make that flashing LED state occur more frequently, where it might be more readily observable in those cases. Q: I inserted the transmitter into the receiver and let it charge for many hours, but the transmitter never fully charged. The transmitter and the receiver is constantly blinking red. Why? A: In some cases, the transmitter could stand to be updated using the Line 6 Updater program found at www.Line6.com/software. Please make sure you are using the latest version of Line 6 Updater. Otherwise, there's a chance that the transmitter was not seated completely into the receiver to start the charging process. Once the transmitter is correctly seated in the receiver, the receiver's LED halo will be a solid white, and the transmitter LED will flash green until fully charged, at which point the transmitter LED will be solid green. Please see the images below for examples. Here is a video that illustrates LED statuses: Q: How long does it take to charge the battery? A: On average, a new transmitter with its battery in a discharged state has given the following results when tested: 15 minutes of charging gives at least 30 minutes of run time 30 minutes of charging gives nearly 1 hours of run time 3 hours of charging (full charge) gives approximately 6 hours of run time for G10T, or 7 hours of run time for G10TII All rechargeable batteries gradually lose capacity, so eventually the run times will decrease. Q: Should I leave my fully-charged G10 transmitter in the receiver? A: The unit is designed for the transmitter to be plugged into the receiver to stay charged. Think of this much like you would a cordless phone. Always keep it docked if you can for good battery life. Not being docked will not damage the battery nor accelerate drainage. Q: What is the lifespan of the battery? A: After 300 full charging cycles, expect the battery to gradually lose capacity, the amount of which varies. Please keep in mind that there are many factors that can affect these numbers, such as temperature, humidity, etc. but not enough to significantly shorten the life span of the battery. Q: Does the G10T/G10TII transmitter fit all guitars? A: We have designed the G10 and G10TII transmitters to fit into almost any guitar. However, we anticipate that there will be some rare cases where the transmitter does not fit into a given guitar. If the G10 or G10TII transmitter is inserted into your guitar and the transmitter's actuator pin is not engaged, the transmitter will not turn on, the LED on the transmitter will not light up, and no signal is processed. We have found that a workaround to this issue is to use a mono-to-mono (TS-TS) Male to Female adaptor or cable. See this article for more details: Relay G10 Guitar Compatibility (Fit/Electronics) Q: Does the G10/G10TII transmitter work with older Variax guitars? A: Yes, but the fit is not exact. Please see this article for more details: Relay G10 compatibility with older Variax models Q: Does the G10 transmitter work with guitars that use active electronics? A: In some rare cases, the guitar's active electronics are wired with inverse polarity. In this scenario, the original G10TII transmitter's electronics can go into a protection mode that keeps the system from being functional. This is evidenced by no output from the receiver, even though the transmitter's light is on. The new G10TII is designed to be electrically compatible with instruments using active pickups and preamps, without the need for an adapter. Additionally, certain instruments may present a level of noise when their active circuitry is engaged and the transmitter is connected. We have found that in most cases, a workaround to this issue is to use a mono-to-mono (TS-TS) Male to Female adaptor or cable. See this article for more details: Relay G10 Guitar Compatibility (Fit/Electronics) Q: Does the G10/G10S system work with instruments other than guitar? A: We developed and tested G10 and G10Sfor guitar and bass, but in theory, these products will work with any instrument-level source. This is not to say that it will work with any instrument you try it with, based on the above guitar-compatibility answers, but we expect that most will find success, so you are welcome to try. Q: If you leave the transmitter plugged into a guitar, does it still use up battery life even if it's not being used? A: After 4 minutes of silence, the transmitter will go into sleep mode, and will come back on when audio is passed through it again. Q: I have a guitar with active pick-ups. Can I leave the transmitter plugged in without the guitar battery dying? A: The experience should not be any different than leaving a guitar cable plugged into the guitar, meaning the G10T or G10TII will shut off in four minutes if it doesn't detect a signal. We suggest turning your guitar down to 0 when not in use, as some guitars, even those without active pick-ups, can produce enough hum or noise to trick the transmitter into staying turned on. Note that with certain guitars that have active electronics, leaving a cable plugged in might drain the guitar's battery, so the same may happen with a G10T or G10TII left in the guitar. Q: What is the maximum input / output level for the Relay G10 and G10S? A: The G10T/G10TII transmitter's maximum input level is 6.5 Vpp (= 9.5 dBu). The outputs on the receivers are at unity, so they are the same. Q: What is the dynamic range for the Relay G10 and G10S? A: Both products feature a dynamic range of greater than 110 dBA when used with either the G10T or G10TII transmitter. Q: What is the frequency response for the Relay G10 and G10S? A: Both products have a response of 10 Hz - 20 kHz when used with either the G10T or G10TII transmitter. Q: What is the amount of latency for the Relay G10 and G10S? A: Both products have approximately 2.8 milliseconds of latency from input to output, when used with either the G10T or G10TII transmitter. Q: What is the input impedance for the G10T/G10TII? A: Greater than 1 MΩ for both transmitters. Q: What are the specs on the provided Relay G10 and G10S power supplies? A: For Relay G10: 5V 1.0A output, input of 100-240v. The Relay G10S includes the DC-1g, which is a 9V DC 0.5A output, input of 100-240v. Q: Will phantom power harm the G10 or G10S receiver? A: No, the receivers will not be harmed by phantom power. Q: At what temperatures can I charge my G10T/G10TII transmitter? A: The recommended charging temperature range of the G10T and G10TII transmitters is specified as 50° F to 86° F (10° C to 30° C). Q: At what temperatures can I operate my G10T/G10TII transmitter? A: The recommended operating temperature range of the G10T and G10TII transmitters is specified as 32° F to 122° F (0° C to 50° C). Q: What are the specs on the provided Relay G10 Series power supply? A: 5V 1.0A output, input of 100-240v Q: Will phantom power harm the G10 receiver? A: No, the G10 receiver will not be harmed by phantom power. Q: Where can I purchase a Relay G10 Series Wireless System or replacement/extra Relay G10 transmitters (G10T)? A: You can order them from any authorized dealer. Q: What type of cable do I need between my guitar & G10T/G10TII transmitter? A: None; it plugs directly into your guitar. Q: Can I use both the 1/4" output and the XLR output at the same time? A: Yes, they can both be used simultaneously. Q: What Cable Tone length is the G10/G10S set to? A: G10's Cable Tone is set to 10 feet on the 1/4" output only. The XLR output is full frequency range. These settings are not configurable. For the G10S, Cable Tone is switchable between Off (full frequency), 10 feet, and 30 feet. Q: What is the range of the G10/G10S? A: The G10 is 50 feet, line of sight, as local conditions allow. The G10S is 130 feet. Line of sight: As with our other wireless gear, be sure to have a visible line of sight with the receiver. To get the best performance out of the G10 or G10S, do not obstruct the receiver with other gear or electronics. Q: How does G10/G10S/G10T/G10TII interact with other wireless devices? A: If you are using G10/G10S/G10T/G10TII in a setup with other 2.4 GHz wireless devices, please make sure to switch on all other wireless devices first, allow them to initialize and set channels, then dock the G10T or G10TII transmitter into the receiver for at least 15 seconds so the system can select a free channel. When using several G10 or G10S systems, please start by docking the first transmitter in the receiver, wait 15 seconds, undock it and plug it into your instrument. Please make sure that it is on (green LED on the transmitter). Repeat this process with the subsequent units. Many Line 6 wireless devices can be set to different RF modes. All Line 6 wireless units in a setup need to utilize the same RF mode to avoid problems. Your G10/G10S/G10T/G10TII unit is always set to RF2, so make sure that any other Line 6 wireless devices in your setup are set to RF 2 mode. G70/75 units use RF3, which can coexist with RF2 for G10/G10S/G10T/G10TII , so long as you avoid using the same channel between them. Here's an article that shows how to switch RF modes: http://line6.com/support/page/kb/_/live-sound/relay-digital-wireless/rf1rf2-mode-switching-frequencies-r130 Q: Is the Relay G10/G10S transmitter (G10T/G10TII) compatible with the X2 receiver (or vice versa)? A: Both systems run in completely different frequency ranges so they are not compatible with each other. However, X2 and Relay units can be used on the same stage (along with any other analog wireless systems) with no problems. Q: Does USB 3.0 create interference in the 2.4GHz frequency range? A : USB 3.0 computer cables and peripherals, including hard drives, are known to emit radio frequency interference throughout the 2.4GHz band, which results in reduced range and/or performance for any 2.4GHz device in its proximity (including wireless keyboard or mouse, WiFi, etc.). We recommend placing any digital wireless receivers at least two meters away from the USB 3.0 device and its cabling. Below is a link to a study by Intel regarding this interference. http://www.intel.com/content/www/us/en/io/universal-serial-bus/usb3-frequency-interference-paper.html Q: How do I register my Relay G10/G10S/G10T/G10TII System? A: You can register on your account: Gear Registration Dimensions - G10 Receiver: H 3.5"; W 4"; L 4" Transmitter: 2" long after inserted into instrument Total boxed weight: 3 lbs. Dimensions - G10S Receiver: H 2"; W 3.5"; L 5" Transmitter: 2" long after inserted into instrument Total boxed weight: 4 lbs.
  14. hi i.thailand Problem!! Transmitter or TBP 12 Dropout!! i change batteries many times LED orange bright it's soft Battery LED RED Audio LED RED and Flashing on Audio LED Who help me please? what's happen Thankyou line id : tonigtl FB /eakkawish Email : toni.gtl@hotmail.com
  15. Hello, Every since I got my Helix a few weeks ago (november 2015) that the LED screen over FS9 flickers (turns off and on rapidly) a few minutes after I turn on the unit and keeps flickering randomly. It sometimes stays off for a few seconds I don't think this problem is firmware related because it started doing this with the original 1.0 firmware and subsequently with firmware 1.03 and 1.04.1. I've tried several things to fix this problem like resetting (FS9 + FS10) the and powering off for a while but nothing works. Should I send the unit back for repair? Thanks, F.
  16. So the PODs LED indicators for clip and signal are always on, even with no instruments or anything attached. Has anyone else encountered this problem? I've cycled through all of my patches and have used clean slates, but nothing seems to get those lights to stop coming on.
  17. I own a Pod hd 500 and I'd like to use it as a midi foot controller for my rig. I need to use buttons FS 1-4 to switch external effect on and off via CC toggle. I program the cc toggle for each button and it works fine but the leds of the buttons never turns on, they always stay off whatever my effect status is. This way, the cc function is pretty useless cause I don't know if my external effect is on or not. Is there anybody that have experienced the same problem? Thanks Roberto
  18. Hello there, I bought a POD studio UX1 a few years ago and as far as i can remember it used to work fine. I decided to start using it again yesterday but found that i cant because; The LED doesnt light up at all when it is plugged in the UX1 is not recognised and is listed as an 'unknown' device I feel i have tried everything, i have; uninstalled and re-downloaded/installed all relevant software multiple times, I have gone and bought a new USB cable which does exactly the same thing I have checked all USB ports in my laptop and they work perfectly with all other devices I have done the obvious such as restarting the laptop and waiting for a while.. The only other coclusion i can think of is that the UX1 is faulty, but i cant see why as its been looked after and barely ever used. I would also like to mension that when i plug the USB cable in, it does make a sound, not the 'da ding', a USB device should make, it makes a 'dung dung' sound, not the 'di dong' one when you unplug a device. thats the only way i can describe it, and that also means the cable should be working. I am also running on Windows 7. Somebody please have a solution to this because i was really looking forward to actually using my UX1 Thanks
  19. I have an FBV Shortboard that I purchased with my Flextone III Plus. It works fine; but as of a week ago, the LED display has been going out randomly. It will come back but I never know when. I'm thinking that I might have a loose connection somewhere. I take it everywhere and all the loading/unloading might have jostled something loose. Anyone experience this before?
×
×
  • Create New...