Please ensure Javascript is enabled for purposes of website accessibility Jump to content

Search the Community

Showing results for tags 'line 6'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Forums

  • Community Support
    • Multi-Effects Units
    • Variax Instruments
    • Amplifiers
    • Computer Based Recording
    • Live Sound
    • Pedals/Controllers
    • Dream Rig - Line 6 Product Integration
  • General Discussion
    • Tone Discussion
    • Line 6 Lounge

Categories

  • General FAQ
    • Operating System-specific Information
  • Tutorial Videos
  • Effects/Controllers
    • HELIX/HX
    • DL4 MkII Stompbox Modeler
    • M5
    • FBV Controllers (MKII / 3)
  • Amplifiers
    • Catalyst
    • Powercab
    • Spider V
  • POD
    • POD Go
    • POD Express
    • Pocket POD
  • Guitars
    • JTV / Shuriken / Variax Standard / Workbench HD
  • Relay G10 Digital Wireless
  • Recording
    • Helix Native
    • Metallurgy
    • Echo Farm/Amp Farm
    • POD Farm 1/2.0/2.5
    • Computer Audio Set Up and Troubleshooting
  • Legacy Products
    • POD
    • Amps
    • 1st Gen Variax Guitars / Bass / Workbench
    • Effects and Controllers
    • AMPLIFi Series
    • Live Sound
    • Digital Wireless
    • Mobile Products
    • POD Studio / Tone Port / GuitarPort
    • Software
    • Dream Rig

Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Joined

  • Start

    End


Group


AIM


MSN


Website URL


ICQ


Yahoo


Jabber


Skype


Location


Interests


Registered Products

  1. I already tried install latest updated driver v4.2.7.7, but it didn't work. I also tried installating old driver of v4.2.7.6 and also didn't work. Can someone help me with this, I just bought this a few months already but I still didn't have the chance to use pod hd pro edit at all. Btw, I'm using windows 10 pro.
  2. Hello guys. I bought line 6 ux2 and I want to hear my guitar through my pc speakers. How can I connect them?
  3. Français Deutsch Below is a chart of the carrier frequencies for each channel in RF1 and RF2 mode. There are 2 frequencies in RF2 mode, because each channel has 2 carrier frequencies per channel. At the same time, each channel in RF1 mode has 4 carrier frequencies per channel. Line 6 Wireless Modes RF2 & RF1 The new V75, 55 and 35 default to RF2 mode, but include the ability to be switched into RF1 mode. You cannot use RF2 mode in the presence of any older Line 6 2.4G wireless (including Relay) in the same venue. If you try you will likely get failures in both the old and new units. Just say no! You can check using the RF scan feature included in XD-V75 receivers. You must either flash older models to the newer V2.0 firmware (and you must have access to a V75 receiver and do this via Monkey) or you can shift the newer models (or any that have been flashed with V2.0) into RF1 mode. If an XD-V75 unit is being added to a setup that already includes any devices running in RF1 mode, the XD-V75 can be used to update the older devices to run RF2 mode by using an internet-connected computer attached to the XD-V75's USB port. See the Firmware Updating Procedure section for more information. Alternatively, the XD-V75 transmitters can be set up to operate in RF1 mode if it is necessary to use the transmitters with older Line 6 receivers. Note: Relay G30 and G50 Receivers that have been updated to V2.0 firmware will *follow* the RF Mode that the corresponding G30 or G50 Transmitter is set to. Note: Encryption only works in RF2 mode. Please also note that the RF Performance feature (the sixth page on the XD-V75 receiver) is only functional when the Tx is in RF2 mode. To Set The THH12 Or TBP12 Transmitters (Including Relay G50/90): Enter Setup mode to display the current channel While holding down the SELECT button, press and release the ON/MUTE button on the THH12 or VALUE button on the TBP12, then release the SELECT button. The display will briefly show [XD-V75 RF1] or [XD-V75 RF2] to indicate whether it is operating in the old or new mode, respectively. This setting is retained when powering off, so as a reminder the display will also show this indication [RF1 or RF2] each time power is turned on. The XD-V75 receiver will display a [To] on the far right of the display to indicate while communicating with a RF1 software transmitter. [Tx] indicates units operating in RF2 mode. They must ALL be the same. The XD-V35 system ships set to the new dual frequency RF2 mode. To use an XD-V35 version transmitter with an earlier generation XD-V30 receiver (RF1 mode), you must change the transmitter from RF2 mode to RF1 mode. The method differs slightly between the handheld and beltpack. Setting THH06 And TBP06 Transmitters (Including G30) THH06 HandheldTransmitter Turn the transmitter off. Press and hold the channel SELECT button. While holding the SELECT button, press and hold the power ON button. The blue LED over channel 1 will flash three times to indicate that the transmitter is in the RF1 mode. To revert to the RF2 mode, repeat the above steps; the blue LED over channel 2 will flash three times when the transmitter is in this mode. TBP06 Beltpack Transmitter With transmitter off, set the Channel Select slide switch to channel 6. Turn on the transmitter. Immediately after the blue light blinks, slide the Channel Select switch completely left to channel 1 and back to channel 6. Do this 3 times total. This process must be completed within three seconds of turning on the transmitter. The blue LED will flash once to indicate that the transmitter is now in the 4-frequency transmission mode. To revert to RF2 transmission mode, repeat the above steps; the blue LED will flash twice when the transmitter is in this mode. Note: It is IMPORTANT to note that once you shift (in either direction) the transmitters will only remember the change if you power cycle the transmitter. Just turn it off with the power switch and then back on. If you were to pop a battery before doing this then it will revert back to the last "saved" mode. Line 6 Wireless RF1 und RF2: Frequenzmodus wechseln Line 6 Wireless Modus RF2 & RF1 Die neuen Line 6 Wireless Sender V75, 55 und 35 werden im RF2-Modus ausgeliefert, sie können aber auch in den RF1-Modus umgeschaltet werden. Der RF2-Modus kann nicht benutzt werden, wenn ältere Line 6 2.4G Wireless-Geräte (inklusive Relay) am gleichen Ort verwendet werden, weil das zu Störungen bei beiden Gerätetypen führen kann. Welcher Modus gerade eingeschaltet ist, können Sie herausfinden, indem Sie die eingebaute Frequenzen-Scan-Funktion Ihres XD-V75-Empfängers benutzen.Um das Problem zu beheben, müssen sie entweder die neuere V2.0-Firmware auf ihre älteren Geräte aufspielen (dazu brauchen Sie Zugang zu einem V75-Empfänger und Monkey), oder sie schalten die neueren Modelle (beziehungsweise jedes Modell, auf dem die V2.0-Firmware läuft) in den RF1-Modus um.Wenn ein XD-V75-Gerät zu einem Setup hinzugefügt wird, das schon Geräte enthält, die im RF1-Modus laufen, kann das XD-V75 benutzt werden, um die älteren Geräte zu aktualisieren. Dazu brauchen Sie einen Computer mit Internetverbindung, der an den USB-Port des XD-V75 angeschlossen wird. Weitere Informationen dazu finden Sie in der Sektion über Firmware-Aktualisierung. Alternativ können Sie das Setup in den RF-1-Modus umschalten, um die Sender mit älteren Line-6-Empfängern zu verwenden. Bitte beachten Sie: Relay G30- und G50-Empfänger, die auf die V2.0-Firmware aktualisiert wurden, „folgen“ automatisch derjenigen Frequenz, auf die der dazugehörige G30- oder G50-Empfänger eingestellt wurde. Einstellen des THH12 oder TBP12 Senders (Inklusive Relay G50/90): Gehen Sie in den Setup-Modus, um den aktuellen Kanal anzuzeigen. Halten Sie den SELECT-Knopf gedrückt, drücken Sie dann den ON/MUTE-Knopf (beim THH12) beziehungsweise den VALUE-Knopf (beim TBP12) und lassen Sie ihn wieder los. Das Display wird kurz [XD-V75 RF1] oder [XD-V75 RF2] anzeigen, so können Sie sehen, ob der Transmitter im alten oder neuen Modus läuft. Die Einstellung wird beibehalten, wenn Sie das Gerät ausschalten. Zur Erinnerung zeigt das Display den jeweiligen Modus [RF1 oder RF2] beim Einschalten des Geräts kurz an. Der XD-V75-Receiver zeigt an der äußersten rechten Seite [To] an, wenn das Gerät mit einem RF1-Transmitter kommuniziert. [Tx] bedeutet, dass die Geräte im RF2-Modus arbeiten. Damit die verschiedenen Sender- Empfänger Generationen zusammen störungsfrei arbeiten müssen ALLE Geräte im gleichen Modus arbeiten. Bedeutet das Vorhandensein eines Senders im RF1 modus.Bedeutet das Vorhandensein eines Senders im RF2 modus. Das XD-V35-System ist bei der Auslieferung auf den neuen Dual-Frequenz-Modus RF2 eingestellt. Um einen XD-V35-Sender mit einem XD-V30-Empfänger der früheren Generation (RF1-Modus) zu verwenden, müssen Sie den Sender von RF2 auf RF1 umschalten. Die Vorgehensweise ist etwas unterschiedlich, je nachdem, ob Sie das Mikrofon- oder das Beltpack-Gerät verwenden. Einstellen des THH06 und TBP06 Transmitters (Inklusive G30) THH06 Handheld-Transmitter Schalten Sie den Transmitter aus. Halten Sie den Kanal-Select-Knopf gedrückt. Während Sie den Select-Knopf gedrückt halten, drücken Sie den Power/Ein-Knopf und halten Sie diesen ebenfalls gedrückt. Die blaue LED über Kanal 1 leuchtet dreimal kurz auf, um anzuzeigen, dass der Transmitter jetzt im RF1-Modus ist. Um in den RF2-Modus zurückzukehren, wiederholen Sie die oben genannten Schritte; die blaue LED über Kanal 2 leuchtet dreimal kurz auf, um anzuzeigen, dass der Transmitter im RF2-Modus ist. TBP06 Beltpack-Transmitter Bei ausgeschaltetem Transmitter den Schieberegler zur Kanalauswahl auf Kanal 6 stellen. Transmitter einschalten. Den Schieberegler sofort nach dem Blinken der blauen LED insgesamt dreimal auf Kanal 1 stellen, zurück auf 6 und wieder auf Kanal 1 schieben. (nicht vergessen: das muss dreimal geschehen) die Sequenz von 6 startend ist also : 6-1-6-1-6 Dieser Prozess muss nach Anschalten des Senders innerhalb von drei Sekunden geschehen. Die blaue LED blinkt einmal, um anzuzeigen, dass der Sender jetzt im RF1 Modus ist, Sie blinkt zweimal wenn man im RF2 Modus ist (auch immer nach Anschalten Status sichtbar) Um in den RF2-Übertragungsmodus zurückzukehren, wiederholen Sie die oben genannten Schritte. Die blaue LED blinkt dann zweimal auf, wenn der Sender im RF2-Modus ist. Wichtig: Bitte beachten Sie, dass das Gerät den soeben eingestellten Modus (egal in welche Richtung) nur beibehält, wenn Sie das Gerät nach dem Wechsel kurz aus- und wieder einschalten. Dadurch wird der aktuell eingestellte Modus gespeichert. Wenn sie vorher eine Batterie eingelegt haben, springt das Gerät zurück zum zuletzt gespeicherten Modus. Line 6 sans fil RF1 et RF2: Changement de modes Les modes de transmission RF2&RF1 Line6 Les nouveaux systèmes sans fil V75, 55 et 35 utilisent le nouveau mode de transmission RF2 par défaut, mais possèdent la possibilité de changer en mode RF1.Il n’est pas possible d’utiliser des appareils qui utilisent le mode RF2 s’il y a des anciens appareils RF1(V70 our Relay) sur la même scène ou dans le même bâtimentSi vous l’essayez, vous allez très probablement voir des erreurs de communication sur les anciens et nouveaux systèmes. Il suffit de ne pas les combiner ! Vous pouvez vérifier la présence d’émetteurs RF1 /FR2 en utilisant la fonction « CHANNEL SCAN » RF dans les récepteurs XD-V75. Vous devez soit mettre a jour les anciens modèles vers la version 2.0 ou vous pouvez changer les modèles déjà équipés de la version 2.0 en RF mode 1. Pour mettre à jour un ancien modèle, vous avez besoin d’un récepteur XDV75, un ordinateur et le logiciel Monkey. Si une XD-V75 est ajouté à une installation qui comprend déjà des appareils fonctionnant en mode RF1, le XD-V75 peut être utilisé pour mettre à jour les appareils plus anciens vers RF2 mode.Pour mettre à jour les modèles précédents, vous devrez avoir accès à l'Internet et une connexion USB entre le XD-V75 à l'ordinateur Voir la section Mise à jour ‘’Firmware Procedure’’ pour de plus amples renseignements. Alternativement, les émetteurs XD-V75 peut être configuré en mode de RF1 s'il est nécessaire d'utiliser des émetteurs avec les anciens Line 6 récepteurs. Remarque : Les récepteurs Relay G30 et G50 qui ont été mis à jour avec le firmware V2.0 suivent automatiquement le mode RF de l’émetteur correspondant. Pour changer le mode RF des émetteurs THH12TBP12et G50/90: Entrez en mode de configuration pour afficher le canal actuel Maintenez le bouton SELECT et pressez et relâchez le bouton ON / MUTE ou la touche VALUE sur le TBP12. L'écran indiqué brièvement [XD-V75 RF1] ou [XD-V75 RF2] pour vous indiquer le mode actif. Également quand vous mettez l’émetteur en marche.Ce réglage est conservé lorsque vous éteignez l’émetteur. Le mode actif [RF1 ou RF2] s’indique chaque fois que l'appareil est allumé. Le récepteur XD-V75 affichera une Icône ( To) à la droite de l'écran pour indiquer le mode RF2, ( Tx)s’indique que l récepteur est en communication avec un émetteur dans mode RF1. Ils doivent tous être les mêmes.montre la présence d’un émetteur RF1montre la présence d’un émetteur RF2 Le système XD-V35 est déjà réglé à la nouvelle fréquence RF2.Pour utiliser un émetteur XD-V35 avec un récepteurXD-V30 d’ancienne génération RF1 vous devez changer l'émetteur de RF2 mode RF1. La méthode diffère légèrement entre le modèle micro THH06 et le modèle ceinture TBP06 (et G30). Pour changer le mode RF des émetteurs THH06TBP06et G30 THH06 émetteur micro : éteignez l'émetteur. appuyez et maintenez enfoncé le bouton SELECT canal. tout en maintenant la touche SELECT, appuyez et maintenez le bouton d'alimentation. Le LED bleu sur le canal 1 clignote trois fois pour indiquer que l'émetteur est en mode RF1. pour revenir en mode RF2, répétez les étapes ci-dessus, le LED bleu sur le canal 2 clignote trois fois lorsque l'émetteur est dans ce mode. TBP06 émetteur ceinture : mettez le sélecteur de canal sur 6. éteignez l'émetteur. allumez l'émetteur et changez immédiatement après vous voyez la DEL bleu le canal vers 1, vers 6 et vers 1. Répétez ca TROIS fois (la séquence est donc 6-1-6-1-6 (commencez sur 6) ce processus doit être achevé dans les trois secondes après la mise sous tension de l'émetteur. le LED bleu clignote une fois pour indiquer que l'émetteur est maintenant dans le mode de transmission RF1. Pour revenir en mode RF2, répétez les étapes ci-dessus le LED bleu clignote deux fois lorsque l'émetteur est dans ce mode. Remarque: Pour sauvegarder le changement de mode RF dans l’émetteur, il vous suffit de l’éteindre et de le rallumer avec avec le commutateur ON/OFF.Si vous enlevez les piles, l’émetteur se met dans le dernier mode RF saufgardé.
  4. Product Manuals: XD-V55 Pilot's Guide XD-V55H Pilot's Guide XD-V55HS Pilot's Guide XD-V55L Pilot's Guide XD-V55 Features: 300 foot (100 meter) range 12 Channels supporting up to 12 simultaneous systems 24-Bit digital audio signal; providing the audio response of a cable without companding 10Hz to 20 kHz bandwidth, with up to 117 dBA dynamic range Microphone Modeling (on the Handheld Transmitter) EQ/Filter Modeling for headset, instrument and lavalier mics (on the Bodypack Transmitter) NOTE: Please do NOT use Stereo (TRS) 1/4" connector/cables with the 1/4" unbalanced Output Jack on the XD-V55. The ring of a stereo cable is used for data transmissions in factory setup and may cause computer-like noise to be coupled into your audio signal if you use a Stereo 1/4" cable. Please use a standard 1/4" MONO cable for the unbalanced Audio Out on the XD-V55 Receiver. Dynamic Filter: engage this feature on the receiver to minimize stage rumble or handling noise. THH12 (Handheld Mic Transmitter) offers four selectable vocal microphone models: [57] - Shure SM57 [58] - Shure SM58 [835] - Sennheiser e835 [L6] - Line 6 Custom TBP12 (Beltpack Transmitter) offers four selectable EQ/filter models: [FLAT] - No EQ (no roll-off or boost to the signal) [s1] - Microphone EQ (Vocal EQ Setting #1: Low Cut) [s2] - Microphone EQ (Vocal EQ Setting #2: Headworn Lavalier Setting) [iF] - Instrument (20-foot guitar cable High Frequency roll-off) Changing Transmitters from RF2 (Default Mode on XD-V55) to RF1 Mode (for either THH12 Handheld or TBP12 Bodypack): Power on the Transmitter Hold the Select button until the Channel Number flashes Press and hold the On/Mute (Power) button and then quickly press the Select AND Value/Power for Handheld) within one second. Waiting longer than one second may turn off the Transmitter Check the LCD Display; reading should change to RF-1 in place of CH, indicating that the Transmitter is now in RF1, which is what the older XD-V70 and XD-V30 Receivers operate on To revert back to RF2 Mode, repeat the above process in Step #3. The Transmission Mode that is set will be remembered when the Transmitter is powered off. Changing Beltpack Power Modes Power transmitter on Press and hold the Select button (“Hold for Setup” is printed on the Tx) Once in Setup, press Select once to get to the Power Mode section Press the Value button to change modes Press Select twice more to cycle through other options and to exit Setup Does USB 3.0 create interference in the 2.4GHz frequency range? USB 3.0 computer cables and peripherals, including hard drives, are known to emit radio frequency interference throughout the 2.4GHz band, which results in reduced range and/or performance for any 2.4GHz device in its proximity (including wireless keyboard or mouse, WiFi, etc.). We recommend placing any digital wireless receivers at least two meters away from the USB 3.0 device and its cabling. Below is a link to a study by Intel regarding this interference. http://www.intel.com/content/www/us/en/io/universal-serial-bus/usb3-frequency-interference-paper.html
  5. ****If you recently purchased a Relay V75-SC Super Cardioid Microphone and that capsule does not have microphone models when placed on another XDV-75 handheld microphone body, then you will need to update the firmware on that handheld microphone to version 2.10. Instructions for updating Line 6 wireless systems can be found in other Knowledge Base articles.**** Range XD-V 70/75 systems are rated at 300 feet under ideal conditions and the XD-V30 systems are rated at a 100 foot range. This ‘Open Air Wireless Range’ also known as ‘Line of Sight’, meaning the transmitter’s antenna must have a clear path to the receiver’s antenna and be reasonably free of interference. For best performance ‘Line of Sight’ should be maintained between the receiver’s antennas and the transmitter’s antennas. Radio waves travel in straight lines and do not go around corners. Barriers such as walls can impede the path of radio waves depending on the thickness and the type of construction. RF will not transmit efficiently through metal barriers. If you have aluminum siding or a metal roof, it is unlikely the RF signal will transmit through this barrier with much efficiency. When using wireless systems indoors you could experience a moderate reduction in range compared to outdoors depending on conditions. RF will not transmit through the earth so if the receiver is placed in the basement, and the earth or ground is obstructing the line of sight transmission, it will not receive the direct signal. Human bodies also absorb RF energy and can affect maximum range so remember to place your antennas accordingly. Avoid cupping the bottom of the handheld mic as it will block the antenna resulting in a loss of range. Another significant reduction of range can be expected if the receiver antennas for the XD-V systems are very close to other intentional radiators in the same frequency band such as Wi-Fi wireless access points. Using the XD-V70 with remote paddle antennas and separating the antennas by several feet can be an effective way to mitigate this condition. Interference Q: What is the difference between Analog and Digital wireless systems handling of interference? A: Since the XD-V wireless system is digital, it is able to ‘intelligently’ ignore all signals that are not specifically intended for it. As a result, no audible interference can be generated due to other RF signals occurring simultaneously with the XD-V RF signals. Additionally, the XD-V system utilizes a frequency diversity system in which four different RF frequencies are transmitted for each single audio channel. Only if there are errors or loss of signal on all four RF frequencies within a single transmission packet will an XD-V system mute. Loss of RF signal can be the result of trying to function at too great a distance, having unintentional transmitters too close to a receiver (near/far), or a significant amount of close-by RF signals within the same 2.4GHz range (Wi-Fi, microwave ovens, etc.). In all cases, the symptoms will be the same: reduction of RF LEDs on the front panel that indicate usable RF signal strength, followed by the audio signal muting. Once good enough RF signal is received again, the signal will unmute. Put simply, all forms of potential interference for the XD-V system will have the net effect of reducing the total usable distance for the system. If your application does not require maximum range, then typically little concern about other radio signals is required. If you intend to use your system at a distance, it is recommended that you ‘walk test’ your system in advance of an event to verify that sufficient RF signal is available to avoid mutes from occurring over the entire desired range. Output Level Q: Why does the level change when I swap an XD-V digital wireless with my old wireless system? A: XD-V digital wireless are designed to be the same as a wired mic and are "unity" at the receiver's output relative to input to the transmitter. Most other wireless systems have gain stages that amplify the signal above the mic level itself. This means there is no relationship between the input level to the transmitter and the output level of the receiver. If the gain has been turned up on your old system then you will likely notice a drop in level when you hot-swap with an XD-V. This is a simple ‘gain-structure’ issue and is not a measure of sound quality. So if you hot-swap an XD-V wireless with the same mic as the model you have selected you will not need to make any changes to your gain structure. If you are replacing an older wireless unit that has gain added, you will need to balance the trim (gain) controls on your mixer inputs to accommodate the ‘unity mic level’ of the XD-V. This is why mixer inputs have gain adjustments ‘¦ so you can properly match mic preamp gain to the input source. Remember, XD-V digital wireless is mic level output only and must be plugged into a mic level input and not a line level input. If the trim controls are calibrated on your input strips a gain of 25-30 dB will probably be in the ballpark with an average vocalist. Frequency/Channels Q: What is different about the XD-V systems compared to the XDR-955? A: The XD-V30/XD-V70 systems use a higher frequency (2.4 GHz) and operate on 6 or 12 channels respectively, rather than 5. The XD-V channels numbers do not correspond to 802.11 Wi-Fi channels however. Q: Can the XDR-955 microphone be used with the XD-V systems? A: Both systems run in completely different frequency ranges so they are not inter-compatible, but X2 and XD-V units can be used on the same stage (along with any other analog wireless systems) with no problems. Q: Are the Relay G-series components compatible with the XD-V series components (or vice versa)? A: Because they both operate in the same 2.4 GHz frequency range, they are compatible. Q: Do the XD-V digital wireless systems share channels with the Relay systems? A: Both XD-V systems share their first 6 channels with the Relay G30. The XD-V70 shares all 12 of its channels with the Relay G50 and G90 models. A total of up to 14 systems can potentially be combined if the V70 firmware has been updated. Batteries and Power Supplies Q: Can I use rechargeable batteries? A: Yes, but the hours and minutes are calibrated to alkaline batteries. Different battery chemistries discharge at different rates, therefore the battery meter reading may be inaccurate when alkaline batteries are not used. The run time will be directly related to the current capability of the batteries. Some experimentation will be necessary to determine how they perform for you. Carbon Zinc batteries should not be used with XD-V wireless systems. Q: Why is the battery meter higher when I restart than when I shut off the transmitter? A: Line 6 2.4G wireless transmitters have a circuit that measures the actual real-time voltage of the installed batteries and transmits that data to the battery meters in the receivers. The battery meters are very accurate when they have been running continuously since new batteries were installed in the transmitter and the transmitter power has not been cycled on and off. However due to the chemical nature of Alkaline batteries, when they have been shut off, the voltage begins to ‘rebound ‘ and the voltage actually increases compared to its value at shutoff. Unfortunately it does not last long and it reverts to true self over twenty minutes or so. For this reason when you first turn on a Transmitter that has been run but allowed to rest the meter will give a high reading that quickly falls over the first few minutes and continues to fall quickly for the first few minutes. This is normal behavior for Alkaline batteries. Q: What's the battery life of XD-V digital wireless systems? A: Battery life depends on the current capacity of the batteries used. Typically AA alkaline batteries can provide about 2400 mAh and will provide about 8 hours of continuous use from two AA alkaline batteries when run on "high" power. Typically you will get 10 hours on the "low" power setting. Be aware of "alkaline rebound" when turning off the unit and turning it back on, as it may look like it has more power than it really has. Antenna Distro Q: Can the RX212 Receiver antennas be linked together? A: Up to 6 receivers can be daisy-chained together using the built-in antenna distro system. LMR-195 antenna cable is required for linking up multiple XD-V receivers. The last unit in the chain should be "terminated" (using the supplied term plugs) when linking receivers together. (Please see the Advanced User Guide). External Antennas Q: What type of antennas work with the XD-V70 receiver (RX212)? A: Line 6 offers both "omni"(P360) and "patch" (P180) directional paddle style antennas as options. http://store.line6.com/. These antennas have built-in line amps to accommodate long cable runs (up to 100' or more) depending on cable type. Antennas connect to Line 6 receivers with BNC connectors. LMR-195 cable (or better) should be used and the gain switch should be set to match the approximate loss of the cable. There are many specialty antennas made by third parties that may also be used. They must be specifically tuned for the 2.4GHz band. You must remember to take into account line loss when using passive antennas Mic Capsules for XD-V Handheld Transmitters Q: What mic capsules can be used with the XD-V handheld transmitters? A: XD-V Handheld transmitters have been designed to allow for the use of interchangeable capsules from 3rd party manufacturers such as Earthworks, Telefunken, Shure and others. However since there is no actual standard for compatibility there is some risk of unintended signal or mechanical issues. Users are advised to test specific combinations prior to purchase. Before replacing a capsule the power should be shut off. Simply screw on the desired capsule, then turn on the power. Mic modeling is bypassed (and not available) when using 3rd party capsules. Depending on the level of the capsule and the loudness of the person singing/speaking into it, the Environment filter may need to be switched ‘off’ if a gating sound occurs. Using Third Party Mics w/ Beltpacks Q: What is the pin-out for wiring to a TA4F connector? A: Pin 1 - Gnd Pin 2 - V+ Pin 3 - Signal Pin 4 - Z (leave open for instrument)(short to pin 3 for mic) For a normal, everyday, run-of-the-mill, Tip/Sleeve (TS) connector for a 1/4" instrument cable end,... the signal goes from 1/4" Tip to TA4F pin-3 (Signal), and 1/4" Sleeve goes to TA4F pin-1 (Gnd). Don’t worry about pins 2 and 4, those are used for Lavaliere Mic connections. Q: What mics work with the XD-V70 Beltpack Transmitter A: Questions often come up as to what mics are compatible with the system and how to adjust the gain to match other wireless systems. Line 6 XD-V70 beltpacks (TBP12) are essentially unity level devices meaning the output voltage of receiver essentially matches the input voltage of the transmitter. So it raises the question’¦ ‘match the level to what?’. Traditional systems are essentially a mic coupled with a preamp, not just a microphone alone. This may require thinking about your system in a new way. With traditional wireless systems that have limited dynamic range, gain and level control are essential if one hopes to have reasonable hiss free operation without excessive distortion. No gain or level matching is required when using XD-V wireless systems because of the XD-V’s wide dynamic range and compander free operation. So the system gain requirement is to have the speech or vocal input to the microphone present an appropriate level into the mic preamp so that the preamp can raise the voltage to be optimum into the next stage of the mixer. Gain is likely needed somewhere in this chain, but as long as the mic preamp has enough gain available there is no problem re-adjusting the input trim to do this. Just turn it up as much as needed. Just remember to plug the output of the XD-V into a ‘mic level’ input on the mixer as it is not intended to be used into a ‘line level’ input. In order to be able to certify a mic and being compatible one would have to know the distance from the user’s mouth and the level of their singing/speech. The sensitivity of both the Line 6 HS70 and the LM4-T lav mic is -46 dB, so using a mic that is approximately the same in sensitivity will result in a similar output voltage to the factory supplied mic. If a lower sensitivity mic were used with any traditional wireless system you would need to turn up the gain in the transmitter, receiver and/or the mixer. If the levels of these three controls are not in perfect sync with each other the result will be extra distortion or extra noise/hiss. With Line 6 XD-V is greatly simplified. Simply make adjustments at the mixer (in the same way as you work with a mic with a cable). Much less complicated (although it may be different than what a user is used to) it insures maximum headroom and far less chance to get it wrong. Just turn up the mixer, that’s why the knobs move. Remember, the relative position of a knob means almost nothing. The correct place is the correct place’¦ no matter where it occurs on the rotation. Examples: Shure® WL-185â„¢ lav is -45.5 dB WL-184â„¢ lav is -44.5 dB’¦ so these mics would be almost identical to The Line 6 LM4. WH30TQâ„¢ headset is -55 dB so it will need a 10 dB boost of the mic trim control on the mixer as compared to the LM4-T to have the same level. Countryman® E6 headsets come with different sensitivities and are specified per application. The E6ow5â„¢ is for general speaking and is the closest to our LM4 levels The E6ow6â„¢ is for strong speaking and singing The E6ow7â„¢ is for ‘powerful vocals’ and will seem very quiet if used for ‘normal speech’ as compared to our LM4-T. This would likely be a poor choice for general speech but could be the proper mic for a screaming singer. Countryman also provides caps to cover and further modify the mic element which can provide additional gain. Audio Technica® AT831 lav is -46 dB AT898 lav is -46 dB * Please double-check that the Audio Technica mic is a model equipped with the TA4F connector. You may need to special order a unit with the correct connection type or refit your existing cable end with the TA4F plug. DPA® 4066 omni headset is -44 dB 4061 omni lav is -44 dB 4060 high output omni lav is ‘“ 35 dB good with very quiet talkers or if the mic is some distance from the performer. Microphone sensitivity does affect the performance of the Environment Filter. If the sensitivity of the mic used is too low there may be audible artifacts. Depending on the situation it may be advisable to switch the filter to ‘off’. Racking V70/75 Receivers Q: How do I connect multiple receivers for rack mounting? A: The XD-V 70/75 half rack sized receivers can be locked together to become a single rack width using the supplied "dovetail key". When mounting a pair of receivers side by side, start with the dovetail inserted approximately half way in the side groove. Then start the second unit, from the front towards the rear and slide until they are closely aligned. A small tap with a mallet and block will align and secure the key in place and level the front faces. Use the short rack ear supplied with each receiver to complete the pair. Multiple rack pairs can be linked together by using dovetail keys in the top and bottom slots of a rack pair. When assembling more than a single pair it is recommended that the left ‘half’ and the right ‘half’ be assembled first and then the ‘halves’ joined together into the 19’ assembly. Wi-Fi Interference Q: Why does my Wi-Fi slow down when I get my transmitter near my computer? A: Because Wi-Fi and Line 6 2.4GHz wireless products share the same frequency band-space. Some users may experience a slowing down or even interruption of their Wi-Fi capabilities when using microphone or instrument transmitters in close proximity to their computers or routers. This is an example of a near/far interference problem and it may be intensified because consumer grade Wi-Fi typically has limited RF dynamic range. Using more XD-V channels operating at the same time will create more competition to Wi-Fi than a single channel would. If your Line 6 transmitter gets within 6 feet of your laptop you may witness this situation especially if your Wi-Fi access point is some distance away. Typically, simply moving your Line 6 transmitter farther away from your computer will remedy the situation. Users of Line 6 twelve channel systems can switch their transmitters to the ‘low power’ setting as this will mitigate the problem as well. If you are using the system outside the USA you can likely switch your Wi-Fi channels to 12, 13 or 14 depending on your location. The frequencies for these channels are outside the Line 6 2.4GHz frequencies. Likewise, switching Wi-Fi to 802.11n in the 5GHz band will avoid Line 6 wireless frequencies and double your potential Wi-Fi throughput. Suggested channels settings to avoid interfering with Wi-Fi. If your WiFi network utilizes the channel listed, use the channel # listed under the Line 6 wireless channel column. Troubleshooting Q: Why am I getting dropouts? A: Assuming no hardware issues, dropouts generally occur because of local conditions. Do I have clear line of sight? The transmitter antenna should be able to ‘see’ the receiver’s antennas. Is your audience blocking the line of sight? Raising antennas to 6-8 feet high will often fix this problem. Make sure you are not being blocked by obstacles such as metal posts, walls, etc. Are your antennas connected firmly and splayed at 90 degrees? If they are straight up and down you could fall victim to a dead zone. Are other XD-Vs operating on the same channel? Each system needs its own unique channel to operate on. Do you have the receiver’s antennas near any intentional transmitters such as walkie-talkies, In-Ear Monitors, etc? They will need to be separated. The distance will depend on the strength of the transmitter and the gain of the transmitting antenna. Are you using the factory power supply? If you are using a substitute supply you must make certain it can supply the required 9vdc at 350 ma. Q: Why is the signal so weak compared to other wireless systems? A: XD-V digital wireless systems have "mic level" outputs (both XLR and 1/4" jacks) and need to be connected in the same manner as wired microphones are and with similar gain/trim settings. Plugging into a "line level" input or a channel with pads engaged will result in a weak and likely noise signal. The preferred connection is with the XLR output on the receiver to an XLR input on the mixer. The 1/4" output is unbalanced and is included as a convenience for users plugging into instrument amplifiers. It is important to NOT use TRS plugs into this jack as the "ring" is used for system upgrades and carries digital information that could be "noisy" if it were connected to an audio input. Q: Why is the sound so "thin"? A: This may be caused by the "Environment Filter" is the signal is too weak, especially when using lav mics. Try turning the filter to the "off" position. Q: What does the Near/Far spec mean? A: The Near/Far interference problem is common to all radio systems and happens when a strong RF signal in the same band uses a large portion of the available gain in a receiver making it difficult or impossible for the receiver to decode the weaker signal. Imagine having a conversation in a quiet room with a person 20 feet away from you. It is likely that you can carry on a conversation with normal voice levels. Now if you move to a noisy environment, with lots of other voices right around your ears, it may be very difficult for the conversation to continue with your long distance friend without the both of you shouting. A similar circumstance occurs with radios, and since the long distance transmitter is incapable of increasing its power output, it is very likely a very near transmitter may interrupt it. In the real world, this is rarely an unmanageable problem. You should avoid having a transmitter closer than 3 feet to a receiver that is not on your channel if the intended transmitter is more than 50 feet from this receiver. If this is a regular requirement you should install remote paddle antennas (G90, XD-V70 series). The near/far spec for XD-V70 is 50’/3’ which means if another transmitter (even though it is on a different channel) gets within 3 feet of your channels antennas at the same time you get 50 feet away the system could be affected in a negative manner.. By increasing the distance between antennas (using the paddle antennas) or simply raising the units up higher, it will become far less a possibility. LED Codes Q: What do the different LED colors mean on the XD-V system components? XD-V70 System THH12 Handheld Transmitter: No LEDs (see owner’s manual for LCD screen info) TBP12 Beltpack Transmitter LED states: Blue LED = power/>1hr battery life Solid red LED = Low Flashing red LED = Very Low/Change batteries Audio LED = Green LED (indicates audio signal) RX212 Receiver: Audio Green LEDs = audio signal present Battery Green LEDs = full battery life Red LED = less than two hours remaining Flashing red = Very Low / Change batteries RF Transmitter on same channel as receiver: Green to indicate signal strength/quality: from 5 Green = Data excellent, interference low to 1 Green meaning Data minimal, may have significant interference. When transmitter is off, or set to different channel than receiver these LEDs show as follows: No LED = No data, no interference 1 Red = No data, some potential interference up to 5 Red = No data, high potential interference. XD-V30 System THH06 Handheld Transmitter LED states: Channel LEDs - Illuminates blue to show the current active channel THH06 is transmitting on. Channel 6 LED will illuminate red when battery life is low and blink red when very low (change batteries). TBP06 Beltpack Transmitter LED states: Audio Green LED = Audio Signal Orange = On power/channel change Battery Blue LED = power/>1hr battery life Solid Red LED = Low Charge Flashing Red LED = Very Low Charge Purple: On channel change RXT06 Receiver LED states 3 Green = Data excellent 2 Green = Data OK, may have some interference 1 Green = Data minimal, may have significant interference No LED = No data, no interference 1 Red = No data, some interference 2 Red = No data, more interference 3 Red = No data, high interference Q: Does USB 3.0 create interference in the 2.4GHz frequency range? A: USB 3.0 computer cables and peripherals, including hard drives, are known to emit radio frequency interference throughout the 2.4GHz band, which results in reduced range and/or performance for any 2.4GHz device in its proximity (including wireless keyboard or mouse, WiFi, etc.). We recommend placing any digital wireless receivers at least two meters away from the USB 3.0 device and its cabling. Below is a link to a study by Intel regarding this interference. http://www.intel.com/content/www/us/en/io/universal-serial-bus/usb3-frequency-interference-paper.html
  6. Mobile Keys FAQ Product Dimensions Mobile Keys 25: 18.75” (L) x 7.25” (D) x 2.75” (H) Mobile Keys 49: 31.875” (L) x 7.25” (D) x 2.75” (H) Sustain Pedal Input Jack: 1/4" TS (Mono) Expression Pedal Input Jack: 1/4" TS (Mono) OS Compatibility (Minimum Requirements) Windows XP or higher Mac OSX 10.4 or higher Apple iOS 4.2 or higher - Compatible with iPod touch (3rd and 4th generation) iPhone 4, iPhone 4S, iPhone 3GS, iPad 3, iPad 2, and iPad. Computer and iDevice Communication/Software Resets Mobile Keys firmware implements Class-Compliant USB MIDI communication which is compatible with the drivers included in all standard installs of Windows XP/Vista/7, Mac OSX, and iOS. This means there are no drivers to download. Sustain Pedal Compatibility Connect a standard sustain footswitch for sustain control with MIDI controller 64. (Auto-sensing jack supports both ˜normally open” and “normally closed” footswitches.) Expression Pedal Compatibility Connect a standard continuous pedal for expression control with MIDI controller 11. We recommend using the Line 6 EX-1 or the Mission Engineering EP1-L6 expression pedals. Factory Reset (Firmware) ( A ) Using the iDevice connection to and running Line 6 MIDI Memo Recorder: If there is a newer firmware version than the one currently installed on your Mobile Keys unit, MIDI Memo Recorder will offer you the option to update automatically. "A firmware update is available! Would you like to update Mobile Keys (25 or 49, depending) to the latest firmware? [Not Now ][OK]". Tapping [OK] the screen goes black and you will see 'Preparing Update' followed by 'Updating Firmware'. After this completes, the MIDI Memo Recorder app screen returns with a dialog that displays “Update Succeeded “. To complete the update, unplug Mobile Keys (25 or 49, depending) and plug it back in [OK]”. Please unplug and re-plug the Mobile Keys device before tapping [OK]. ( B ) Using the USB connection to a host computer (Windows/Mac) and running Line 6 Monkey: If you don't have the latest version of Line 6 Monkey installed you can get it here. Click on the “Flash Memory” component in the Updates screen of Monkey. Click the “Update Selection” button (or “Reinstall Latest”), if you wish to re-flash the device). Wait for the progress indicator to reach completion and following the remaining Monkey prompts. Reset of SHIFT Function Settings Disconnect the Mobile Keys from the intended host device first. Press and hold the SHIFT button. Power on the Mobile Keys unit (physically connect via USB or iDevice). Press any of the first 9 (white) keys, or C-D-E-F-G-A-B-C-D-E on the lowest/left side of the keyboard range. Release SHIFT and the white key. Q: Can I connect the Mobile Keys 25 & 49 or to Apple iOS devices that have a Lightning connection instead of a 30-pin connection? A: Yes, you can connect a Mobile Keys 25 or 49 to a Lightning connection equipped Apple iOS device by using one of the Apple brand 30-ping to Lightning adapters that are available at the links below: Lightning to 30-pin Adapter Lightning to 30-pin Adapter (0.2m) Q: Do the Mobile Keys 25 & 49 work with Android products? A: Many of you have asked why Line 6 mobile products only work with Apple devices, not Android. Since many smartphone and tablet manufacturers support the Android operating system and have different connectors, it is unfortunately very difficult to develop and support products for these various hardware configurations. Apple devices share a standard, 30-pin dock connector which is why we’re able to create a single hardware solution for these devices. Q: My Mobile Keys was working, but after I unplugged it from my iOS device, then plugged it in again, the Mobile Keys is not recognized and won't work with any app. A: This will happen even after the iOS device goes into Sleep mode. What solves it is running the MIDI Memo app to re-initialize the keyboard. If MIDI Memo says a Line 6 interface is required, unplug then plug in the cable. Once MIDI Memo makes the “enable recording” button available, the keyboard is ready to use.
  7. Hi! So, I have been seriously considering buying Helix LT from Thomann, since its under 900€ there. How ever, I have never used these amp modeling units before, and my understanding of them is pretty limited. So, my question is: How would I setup the Helix LT to be able to use headphones, and play along with Spotify tracks on my PC? Just to be super clear, i want to hear BOTH Helix and Spotify from my headphones at the same time (duh) I do have a Focusrite Scarlett Solo 2nd gen audio interface which I plug my headphones into when normally using my PC. So would I need to connect the Helix to the Focusrite? If so, should I connect it to the microphone, or instrument slot? Or will it be enough to just connect the Helix to my PC with the USB cable, and then plug headphones into the Helix? I live in an apartment, so being able to use headphones and play along to music that way is a "must have" feature for me. I have been using amp sim softwares like Bias Amp before, and with those I have just plugged my guitar into my pedalboard, and the pedalboard into my Focusrite interface and that's it. Thank you so much for your help! I am really looking forward to getting the Helix if what I described is possible with it.
  8. I am having difficulty getting dual input to work with my Line6 UX2. I am trying to setup my rig to have an electric guitar + vocal input playing at the same time, but I just can't figure it out. I know that both the vocals + guitar work fine in both Podfarm + Ableton too. But on Podfarm the second 'Input' is greyed out and I can't even click on it. I only seem to have the option to swap between guitar/vocals on Input 1. I can also see on the UX2 device that both of the monitors are showing identical input. I have a feeling that I am missing something really basic, but does anyone have a clue how I can get this setup to work? (Or tell me what I am missing...) I have attached a photo of the greyed out input in Podfarm. Cheers for your help
  9. I am using Line 6 pod x3 live and I have a problem that I can’t find a solution to. I wanted to make some individual sounds so I downloaded the last version of Line 6 Monkey from the official site. After downloading drivers I installed GearBox. My GearBox detected Line 6 pod x3 live and all the Banks. After that I changed configurations of some Banks and used the Put All button to save it all to Line 6 pod x3 live. While I was using my pod connected to computer it all worked alright. When I disconnect the pod from computer Tone 2 in all Banks was the same as the last Tone 2 used in active Channel. When I connected Line 6 pod x3 live to computer with GearBox it all worked alright – all Banks had the right configurations I have made before. That I tried to get all Banks from my Line 6 to GearBox with Get All button and all Banks had the right configurations too. The problem is that when I disconnect Line 6 from computer Tone 2 in all Banks has the configuration of the last Tone 2 of the active Channel. I would be very glad if you could help me to solve the problem.
  10. Bonjour, Je lance une bouteille à la mer ? Suite à ma recherche pour controler les canaux de ma tête Laney Ironheart via le HX effects j'ai finalement décidé d'acheter le "Voodoo Lab control switcher" qui me parait la solution la plus confortable. Pour info je me suis renseigné auprès de Voodoo Lab (échanges de mails) et on m'a bien dit que je ne devrais pas avoir de problèmes pour controler ma tête avec le switcher et le HX Effects. Chose importante : l'entrée footswitch de ma tête d'ampli est un "DIN 5 Pins" mais en aucun cas une entrée midi. laney J'ai donc commencé à connecter tout le matos, et la première étape est ok ! : Le "Voodoo lab" arrive bien à faire switcher les canaux de la tête d'ampli via la sortie MULTI (DIN 5 Pins également) quand j'appuie sur les boutons de devant : voodoo [/img] Mon problème est que je n'arrive pas à envoyer le signal midi du "HX Effects" vers le "Voodoo lab". Dans "Command center" du HX Effects je ne sais pas si il faut que j'utilise MIDI CC ? ou Bank PC ? Il faut que j'utilise "Instant 1-2-3-4-5-6" ou "Footswich 1-2-3-4-5-6" ? Et ensuite comment envoyer le signal ? Midi ch, CC# etc... ? Quel numéros ? J'ai vu dans le manuel du voodoo lab qu'il y des canaux CC# 80-83, 84-87 etc.. mais je n'y pompe rien, de plus il n'y à la le numéro "value". J'en ai vu certains qui utilisaient des "Snapshots" pour faire changer les canaux de leur ampli et je n'arrive pas à comprendre à quoi cela sert vraiment. Bref, j'ai essayé plein de combinaisons mais je n'ai pas réussi à envoyer de signal Midi vers le Voodoo Lab. Pour info, j'ai bouffé plein de vidéos youtube (pas trouvé ma config) ainsi que des recherches google à n'en plus finir mais impossible de trouver la solution (et je ne pige pas grand chose en ce qui concerne le MIDI du HX)... J'ai également lu le manuel du HX et du Voodo Lab mais rien n'y fait. Je ne comprend pas bien les "snapshots" et les "instants". Un énorme merci d'avance si quelqu'un s'y connait au niveau du midi du HX effect et peu m'aider à trouver une solution Ma config et les manuels : - Ampli Laney Ironheart 60 : https://manuals.laney.co.uk/IRT120H_IRT60H_Manual_ML.pdf - Line 6 HX Effects : https://line6.com/data/6/0a020a3d3f355a6a18827952c/application/pdf/HX%20Effects%202.50%20Owners%20Manual%20-%20French%20.pdf - Voodoo Lab control switcher : http://www.voodoolab.com/manuals/control_switcher_v1_manual.pdf La chaine avec les cables midi : 1er cable midi : Sortie midi du HX effect => dans le IN Midi du Voodoo control switcher. 2ème cable midi : Sortie MULTI Voodoo lab entrée (5 pins également) => Sortie de la tête d'ampli DIN 5 pins. Merci d'avance !
  11. Hello, I have been using the toneport ux2 for a while to connect my studio monitors to my pc and had no problems with it. Recently i bought a xlr microphone and connected it. It was all good untill I shut down my computer. When I turned on my computer it didnt work. The fix I found was changing the inputs & recording to another one and then swapping it back in the Line 6 Audio-MIDI devices program and changing the default format in the settings of the audio interface. The problem switches between the mic not working at all or producing a very loud white noise. I already updated all my drivers and checked the cables / connections, it is a software based problem. Does anyone know a fix for this because it is pretty annoying changing around the settings every time I want to use the microphone.
  12. I recently downloaded Line 6 Monkey off of the website and have went to install it however when I got to the page allowing me to check for updates it says it cannot connect to the internet even though I have and there are other tabs open on my laptop that are working just fine with the internet connection, I've tried disconnecting and reconnecting but it still says there's a problem and I have no active anti-virus' or anything that may obstruct it so i'm really stuck on what to do here?? :(
  13. So I think I might know what it is, but I accidentally left my amp on when I left my house for vacation, when coming back a week later, the amp wouldn't power on. I found that the tube fuse was just fine, but the main power fuse was blown, so I got a replacement fuse, replaced it, blew again, I have 3 line 6 cabinets, all different speaker configurations, so I tried another cabinet, and the fuse blew again. What I think is, that the transformer is going out, but I see this might be a common thing for this amp? I mean, lets be honest I, ME, MYSELF left the damn amp on for what could have been a week, and it could have blown something. But if someone could point me in the right direction for troubleshooting, or where to buy a replacement and I can just do it myself? Thank you! Hetrickaj
  14. What's all the fuss about? Industry insiders point to 2009 as the year that analog wireless ceases to operate reliably. Digital television (DTV) broadcasts are mandated to take the airwaves and leave the old analog technology behind. How might this affect me? Many users of today's analog wireless systems are unaware of the impending UHF spectrum changes mandated by the FCC. Furthermore, the FCC is considering potential unlicensed devices and services that would operate in the “White Spaces” (empty TV channels that vary widely from city to city). It remains to be seen what the actual impact of these new sources of interference will have on today’s analog wireless systems as these devices were not made to operate in unprotected airspace. The Line 6 Solution Line 6 Digital Wireless systems are all 2009 Compliant meaning that they will continue to operate reliably for many years to come free from the concerns of interference from DTV and others. This is made possible due to proprietary digital RF technology that broadcasts at 900 MHz while utilizing a unique digital key to lock out all other sources of interference. Will Line 6 digital wireless systems work outside of the U.S.? Your only limitation in using our systems is whether or not it is legal to broadcast in the 900 MHz range (specifically, 902-928 MHz). Each country has its own regulations and ways of enforcement. You should research the broadcast laws in the countries you tour in. For example, US and Australian X2 systems both transmit in the 900 MHz range. However, the US versions use 902-928 MHz and Australian versions use 915-928 MHz. You cannot mix US and Australian components. Australian systems can be used legally in the US but not the other way around. The only system available for Australia is the XDS95. There is no dual-frequency anti-jamming interference protection on this system. XDS-PLUS and XDR95 systems are not sold or configured for Australian operation. When I turn on my XDR95 or XDSPlus transmitter and receiver, the RF light comes on as soon as they are on the same channel, even before I start playing. Is this normal? As soon as your transmitter is turned on, it begins broadcasting RF (radio frequency) and data to the receiver. If you want to check for unwanted RF or look for a clean channel, leave the transmitter off while scanning the channels. Can I run two transmitters (1 instrument and 1 mic) through one Line 6 digital wireless receiver? If you wish to use two transmitters at the same time (as in simultaneous operation), you will need one receiver for each transmitter, each set to different channels. In fact, you can use up to 5 transmitters and 5 receivers set to different channels operating at the same time. You can use up to five transmitters set to different channels with the same receiver, but they cannot operate at the same time. If two or more LINE 6 digital wireless transmitters are set to the same channel, you will experience dropouts and interference. Will I have problems with noise when switching between multiple transmitters? When operating multiple transmitters, it’s best to put them all on the same channel. Power up only the unit you are currently using. When you make an instrument change, simply turn the one you have been using 'off', then turn the one you are about to use 'on', making sure to keep the same channel selected. The receiver will auto- mute when there is no transmitter 'on', so it will not create any noise while making the switch. Will my XDR transmitter work with my XDS receiver? Yes, press and hold the Channel / Mode button while powering up the XDT4 transmitter and it will change to XDS mode. Will my XDS95 transmitter work with my XDR95 or XDSPlus system? Yes, the XDS (pedal) transmitter is compatible with the XDR (rack) receiver, but you will not gain the benefits of a full XDR95 rack system. It will perform more like an XDS95 pedal system. You may gain some range depending on conditions, but you will not enable the Q-diversityPLUS (anti-jam) technology. Please refer to your manual for how to change modes so your XDR receiver will recognize the XDS signal.
  15. Yo ! I recently bought Pod X3, the red bean version and I've been wondering if I can attach ANY footswitch or do I have to use Line 6 FBV ? Thanks from advance :3
  16. XD-V Digital Wireless Systems Comparison Page Receiver Output Level Adjust (Digital Gain Control): default is set to Unity Gain (0 dB), but now the XD-V75 Receiver provides users with the ability to adjust output "digital" gain by -18dB up to +12dB to provide more flexibility, especially when using third party microphones. Note: +12dB gain is NOT equivalent to "line-level" signal; this is still a "mic-level" signal. 14 Channels: up from the 12 Channels on our previous XD-V70 system. 10 Microphone models (for Hand-Held System) L6 (Line 6): Line 6 Custom 58 (Shure): SM58 B58 (Shure): Beta 58 57 (Shure): SM57 835 (Sennheiser): e835 935 (Sennheiser): e935 41 (Audio-Technica): AE4100 767 (Electro-Voice): N/D767A O5 (Audix): OM5 D5 (AKG): D5 *All product names above are trademarks of their respective owners, which are in no way associated or affiliated with Line 6. These trademarks of other manufacturers are used solely to identify the products of those manufacturers whose tones and sounds were studied during Line 6's sound model development. SHURE and SM58 are registered trademarks of Shure Incorporated. Sennheiser is a registered trademark of Sennheiser Electronic Corp. Audix is a registered trademark of Audix Corporation. Audio-Technica is a registered trademark Audio-Technica Corporation. Electro-Voice is a registered trademark of Telex Communications, Inc. AKG is a trademark of AKG Acoustics GmbH. 9 Custom EQ Filter models (for Lavalier/Headset/Transmitter Systems) SF1 (Speech Filter 1): Gentle High-Pass SF2 (Speech Filter 2): Gentle High-Pass and High-Cut SF3 (Speech Filter 3): Moderate High-Pass and High-Cut SF4 (Speech Filter 4): Gentle High-Pass, Mid-Cut and High-Cut SF5 (Speech Filter 5): Moderate High-Pass, Mid-Cut and High-Cut SF6 (Speech Filter 6): Aggressive High-Pass, Mid-Cut and High-Cut IF1 (Instrument Filter 1): Guitar Cable High-Frequency Roll-Off IF2 (Instrument Filter 2): Woodwind Instrument Enhancement IF3 (Instrument Filter 3): Brass Instrument Enhancement Audio Metering (LED 5) Red *Clip*: only lights up when audio signal is clipping (LED 4) -06dB: any peak signal -6dB or above (LED 3) -18dB: any peak signal -18dB or above (LED 2) -30dB: any peak signal -30dB or above (LED 1) -60dB: any peak signal -60dB or above Battery Metering (LED 5) Green: 5 or more hours left (LED 4) Green: 4-5 hours left (LED 3) Green: 3-4 hours left (LED 2) Green: 2-3 hours left (LED 1) Green: 1-2 hours left (LED 1) Red: 1 hour left (LED 1) Red *Flashing*: less than 40 minutes left Improved Dynamic Filter: minimizes unwanted handling or incidental background noise. OFF: No Filtering NORM: Filter for Singing TALK: Filter for Speaking RF Channel Scan: provides a visual map of the 2.4 GHz space in the System Setup of the Receiver Unit, enabling system technicians and performers to "map out" the 2.4 GHz spectrum when other wireless devices in proximity are active as well. It also provides visual indication of the RF1 and RF2 mode devices being operated in the range of the receiver. In short, allows the user to select channels that have lower background interference and to better avoid WiFi interference. Crypto Mode: a digital cipher scheme allowing secure open-channel communication in critical situations. Better known as encryption and allows to lock a transmitter to a receiver so that no other receiver (that doesn't have the code keyed in) to receive the transmission from that particular transmitter. This provides security for those who wish to keep their program material from being intercepted by unauthorized individuals. It is typically used in courtrooms, hospitals and board meeting rooms. NOTE: If encryption is active on one device (i.e. the transmitter) and not the other (the receiver), the error message "Blocked no transmission" will be displayed. Improved RF Out-Of-Band Isolation: improved radio front end providing better isolation from RF interference outside of the 2.4 GHz band. Normally RF signals that are not close to the tuned frequency of a receiver are ignored by that receiver, however when they are very close or very strong they may interfere with a receiver. We added an extra layer of protection and filtering to block signals from transmitters outside of the 2.4 GHz band. Mini-USB Port: for any future Firmware updates when new versions are release via Line 6 Monkey. It is now possible to update existing Relay and XD-V products via 1/4" TRS (stereo) cable or radio transmission from the XD-V75 antenna outputs with the XD-V75 Receiver. Dimensions XD-V75 Receiver: Standard 1 unit space height (1/2 width) rackmount Does USB 3.0 create interference in the 2.4GHz frequency range? USB 3.0 computer cables and peripherals, including hard drives, are known to emit radio frequency interference throughout the 2.4GHz band, which results in reduced range and/or performance for any 2.4GHz device in its proximity (including wireless keyboard or mouse, WiFi, etc.). We recommend placing any digital wireless receivers at least two meters away from the USB 3.0 device and its cabling. Below is a link to a study by Intel regarding this interference. http://www.intel.com/content/www/us/en/io/universal-serial-bus/usb3-frequency-interference-paper.html Additional Links: XD-V75 Manual XD-V Digital Wireless Microphones FAQ Digital Wireless Troubleshooting USB Firmware Updating USB Firmware Updating (Device Positioning)
  17. I don’t know if anyone else has mentioned this, but I run my guitar into a external wah then into the helix and one of the analog outs goes into a fender twin reverb reissue, everyone knows this is a loud amp but with the helix in front I can run it a bit hotter and use the volume on helix to tame it to bedroom levels! I know better not to use cab sims with a real amp but with how clean the twin is, I find I get great representations of various amps using the pre blocks as a gain stage pedal. I know this is all obvious, but it’s like finding the toothpick in your Swiss Army knife.
  18. Hi guys, I'm using reaper, and it cannot detect my mic through the the dedicated mic input on the ux1. I've checked the drivers on Monkey and they are all up to date. The mic gain is turned all the way up. I've also tried switching Input: mono from left to right and still no result. The microphone itself works, as I can run it through the guitar input. Can anybody help me with this? Best wishes, Ben
  19. German instructions: Deutsche Übersetzung ist unter French instructions: Traduction francaise est ci-dessous Relay G30/G50/G90 Device Firmware 2.0 Update Release Notes This release is recommended for all G30/G50/G90 system owners who desire compatibility with Line 6's RF2 mode products. The benefits of RF2 mode on the G30/G50/G90 are as follows: Less impact on other devices operating in 2.4GHz space Compatibility with other RF2 devices such as the XD-V75, XD-V55 and XD-V35 NOTE: An XD-V75 Receiver is required in order to perform this upgrade. If you cannot access an XD-V75 Receiver via a friend or retailer, please contact Line 6 Customer Service for assistance. TBP12 transmitters must currently be loaded with firmware v1.03 or greater to upgrade via Line 6 Monkey. If your TBP12 has an earlier version firmware installed, it will need to be returned to Line 6 for upgrading. TBP06 transmitters using firmware version 1.02 and earlier cannot be updated by anyone but Line 6. Once they are updated, future updates can be done by the customer if they have access to an XD-V75. How to determine the currently installed firmware version: Relay G30 Bodypack Slide the Channel Switch to channel 1, then turn on the Relay G30 Bodypack. Wait for the LEDs to settle, then immediately switch the Channel Switch from 1 to 6, then back to 1 three times (1->6->1->6->1->6->1). The AUDIO LED will blink the version number - Green for the major number, and Red for the minor number, i.e. 1 green blink, 2 red blinks indicate v1.02). Instructions for updating the Relay G30/G50/G90 Receivers: Obtain an XD-V75 Receiver Connect the XD-V75 Receiver to your PC or Mac using a USB cable Disconnect, then reconnect the DC power plug for the XD-V75. "Loader Enabled" should be displayed. Connect the XD-V75 Receiver to the G30/G50/G90 Receiver by using a cable with TRS to TRS (stereo) 1/4 inch phone plugs on either end. The cable should plug into the 1/4 inch audio output of both the XD-V75 and the G30/G50/G90 Receivers Launch Line 6 Monkey, then Log In, then select "Relay G30/G50/G90 Receiver" as your device and follow the on screen instructions Instructions for updating the Relay G30/G50/G90 Transmitters: Obtain an XD-V75 Receiver Connect the XD-V75 Receiver to your PC or Mac using a USB cable Disconnect, then reconnect the DC power plug for the XD-V75. "Loader Enabled" should be displayed. Launch Line 6 Monkey, then Log In, then select "Relay G30 Transmitter (1.0)" as your device and follow the on screen instructions. If Line 6 Monkey is not able to connect to the Transmitter, select "Relay G30 (or G50/G90 depending on your system) Transmitter" as your device and follow the on screen instructions. NOTE: G30 Transmitter owners with firmware version 1.0 should select "Relay G30 Transmitter (1.0)" in Line 6 Monkey in order to connect to the transmitter. G30 Transmitters with firmware 1.01 or later should select "Relay G30 Transmitter" in Line 6 Monkey. ***Transmitter Updaters: please use this Device Positioning document for visual reference on how to place the Transmitter to the XD-V75 Receiver for optimal data communication: http://line6.com/support/page/kb/_/live-sound/relay-digital-wireless/device-positioning-for-updating-transmitters-an-r77 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Die neue Firmware V2.0 wird allen Nutzern empfohlen die eine Kompatibilität zwischen G30/G50/G90-Systemen und RF2-Modus-Produkten von Line 6 gewährleisten wollen. Die Vorteile des RF2-Modus sind folgende: Weniger Einfluss auf andere Geräte, die im 2,4 GHz-Bereich arbeiten Kompatibilität mit anderen RF2-Geräten wie XD-V75, XD-V55 und XD-V35 Bitte beachten Sie: Für diese Aktualisierung brauchen Sie einen XD-V75 Empfänger. Wenn Sie keinen Zugriff auf einen XD-V75 Empfänger über einen Händler oder Bekannten haben dann nehmen Sie Verbindung mit dem Line6 Kundendienst auf. TBP12-Sender müssen zur Zeit mindestens die Firmware V1.03 aufgespielt haben, damit sie über Monkey aktualisiert werden können. Wenn Ihr TBP12 eine frühere Firmwareversion hat, müssen Sie es zur Aktualisierung an Line 6 schicken. Anleitung zur Aktualisierung des Relay G30/G50/G90- Empfängers: Besorgen Sie sich einen XD-V75- Empfänger Verbinden Sie den XD-V75- Empfänger per USB-Kabel mit ihrem PC oder Mac Verwenden Sie ein Kabel dass Stereo-Klinken-Stecker auf beiden Seiten des Kabels aufweist um den XD-V75- Empfänger mit dem G30/G50/G90-Empfänger zu verbinden. Schalten Sie beide Geräte ein. Trennen Sie den Netzstecker vom XD-V75 und verbinden Sie Ihn wieder. Auf dem Display des XD-V75 erscheint ‚‘‘ Loader enabled‘‘. Starten Sie Line 6 Monkey und verbinden sich mit Ihren Benutzerdaten und wählen "Relay G30/G50/G90-Receiver" als Gerät aus. Trennen Sie nun den Netzstecker vom G30/G50/G90 Empfänger und klicken auf ‚‘‘OK‘‘ in Monkey. Die Nachricht ‚‘‘ Preparing Receiver erscheint auf dem Bildschirm. Auf dem Display des XD-V75 erscheint ‚‘‘ Programming MCU‘‘ Das nächste Fenster fordert Sie auf den Netzstecker wieder mit dem G30/G50G90 zu verbinden. Im Aktualiesierungsfenster von Monkey das nun erscheint wählen Sie ‚‘‘ FLASH MEMORY‘‘ und klicken auf ‚‘‘ UPDATE SELECTION‘‘. Akzeptieren Sie die Lizenzbedingungen und klicken auf ‚‘‘ OK‘‘. Das nächste Fenster weist Sie darauf hin dass die Aktualisierung vorgenommen wird, klicken Sie auf ‚‘‘ YES‘‘. Der Fortschritt der Aktualisierung wird im Dispaly des XD-V75 angezeigt und kann einige Minuten dauern. Wenn die Aktualisierung abgeschlossen ist bekommen Sie die Meldung von Monkey ‚‘‘Receiver update successful‘‘. Trennen Sie nun den Netzstecker vom G30/G50G90 und verbinden Sie Ihn wieder und schalten den Empfänger ein. Trennen Sie den Netzstecker vom XD-V75. Anleitung zur Aktualisierung des Relay G30/G50/G90-Senders: Besorgen Sie sich einen XD-V75-Empfänger Verbinden Sie den XD-V75-Empfänger per USB-Kabel mit ihrem PC oder Mac Verbinden Sie eine einzelne Antenne mit dem Antennenausgang B OUT. Trennen Sie den Netzstecker vom XD-V75 und verbinden Sie Ihn wieder. Auf dem Display des XD-V75 erscheint ‚‘‘ Loader enabled‘‘. Positionieren Sie Ihren eingeschalteten Sender ( RELAY) wie unter folgendem link ( *** ) aufgezeigt über der Antenne. Starten Sie Line 6 Monkey und verbinden sich mit Ihren Benutzerdaten. Wählen Sie Ihr Bodypack "Relay G30/G50/G90 Bodypack" als Gerät aus. Drücken und halten Sie den ‚‘‘ VALUE ‚‘‘ Schalter und schieben den ‚‘‘ON/OFF‘‘ Schalter in die OFF Position. Während Sie den ‚‘VALUE‘‘ Schalter gedrückt halten drücken Sie die ‚‘‘ SELECT‘‘ Taste 8 mal bis das Zeichen ‚‘‘ LOADER‘‘ auf dem Display erscheint. Klicken Sie auf ‚‘‘OK‘‘ in Monkey. Eine Verbindung zum Bodypack wird aufgebaut, sollte die Verbindung nicht zustandekommen wird ein Fenster geöffnet dass Sie darauf hinweist. ( In diesem Fall einfach das Bodypack repositionieren bis sich die Nachricht von alleine schliesst) Wählen Sie ‚‘‘ FLASH MEMORY‘‘ und klicken auf ‚‘‘ INSTALL UPDATE‘‘. Akzeptieren Sie die Lizenzbedingungen und klicken auf ‚‘‘ OK‘‘. Um die Aktualiesierung zu starten klicken Sie auf ‚‘‘ YES‘‘ im folgenden Fenster. Auf dem Display des XD-V75 erscheint ‚‘‘ Programming MCU‘‘. Die Aktualiesierung kann einige Minuten dauern. Nachdem die Aktualisierung abgeschlossen ist schalten Sie den Bodypack ein währen Sie die ‚‘‘SELECT‘‘ Taste gedrückt halten, das Display zeigt Ihnen nun die neue Versionsnummer an. Trennen Sie den Netzstecker vom XD-V75. ### Wenn Line 6 Monkey sich nicht mit dem Sender verbinden kann, wählen Sie „Relay G30 Transmitter“ (oder G50/G90 je nachdem, welches System Sie benutzen) als Gerät aus. HINWEIS: Wenn Sie einen G30-Sender mit der Firmware-Version 1.0 benutzen, wählen Sie im Line 6 Monkey „Relay G30-Transmitter (1.0)“ als Gerät aus, um Monkey mit dem Sender zu verbinden. Bei G30 Sendern mit der Firmware-Version 1.01 oder höher wählen stattdessen „Relay G30-Transmitter“. ***Wenn Sie einen Sender aktualisieren: Bitte nutzen Sie diesen Link Visuelle Referenz , in dem visuell dargestellt wird, wie Sie Sender und Empfänger platzieren müssen, um eine optimale Datenübertragung zu gewährleisten. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Relay G30/G50/G90 mis à jour version 2.0 Cette mise à jour est recommandé pour tous les propriétaires de systèmes G30/G50/G90 qui désirent la compatibilité avec les produits Line 6 qui fonctionnent en mode RF2. Voici les avantages de RF2 mode sur le G30/G50/G90 : - Moins d'impact sur d'autres appareils fonctionnant dans le réseau 2,4 GHz - Compatibilité avec les autres appareils RF2 comme les XD-V75,V55 et XD-XD-35 REMARQUE: Un récepteur XD-V75 est requis pour effectuer cette mise à jour. Si vous ne pouvez pas accéder à un récepteur XD-V75 par un ami ou revendeur, veuillez contacter le Service clientèle de Line 6 pour vous assister. Les émetteurs TBP12 doivent avoir le firmware v1.03 ou plus pour pouvoir les mettre à jour avec le logiciel Line6 monkey. Si votre TBP12 est muni d'une version du firmware antérieure à 1.03 , l'appareil doit être retourné chez Line 6 pour la mise à jour, veuillez alors contacter le Service clientèle de Line 6. Instructions pour la mise à jour des Récepteurs RELAY G30/G50/G90 : Procurez-vous un récepteur XD-V75. Connectez le récepteur XD-V75 à votre PC ou Mac à l'aide d'un câble USB. Branchez le récepteur XD-V75 au récepteur G30/G50/G90 en utilisant un câble jack TRS vers TRS (stéréo).Le câble jack stéréo doit être branché entre les sorties jack audio du XD-V75 et du récepteur G30/G50/G90. Allumez les récepteurs Débranchez, puis rebranchez le câble d'alimentation du récepteur XD-V75. Le message ‘’ LOADER ENABLED’’apparaît sur l'affichage du XD-V75. Lancez Line 6 Monkey, puis connectez-vous avec votre nom d'utilisateur et mot de passe, sélectionnez votre récepteur "Relay G30/G50/G90 Receiver" comme dans l’image ci-dessous. Déconnectez le câble d'alimentation du récepteur G30/G50/G90. Cliquez sur OK . Le message ‘’ Preparing Receiver’’ apparaît sur l'ecran. Sur l'écran du XD-V75, vous verrez le message ‘’ Programming MCU’’ Le message suivant vous indique de rebranchez le câble d'alimentation du récepteur G30/G50/G90. Accepter le contrat de licence et cliquez sur ‘’OK’’ Cliquez sur ‘’ Yes’’ dans la fenêtre suivante. L'état d'avancement de la mise à jour peut être vu sur l'écran du XD-V75 et peut prendre quelques minutes. Le message ‘’ Receiver update successful’’ sera affiché lorsque la mise à jour est terminée. Débranchez, puis rebranchez le câble d'alimentation du récepteur G30/G50/G90. Débranchez le câble d'alimentation du récepteur XD-V75. La mise à jour et complet. Instructions pour la mise à jour des transmetteurs RELAY G30/G50/G90 : Procurez-vous un récepteur XD-V75. Connectez le récepteur XD-V75 à votre PC ou Mac à l'aide d'un câble USB. Connectez une seule antenne à la sortie B OUT Débranchez, puis rebranchez le câble d'alimentation du récepteur XD-V75 Le message ‘’ LOADER ENABLED’’apparaît sur l'affichage du XD-V75. Positionnez votre transmetteur RELAY comme indiqué dans le lien suivant (***). Lancez Line 6 Monkey, puis connectez-vous avec votre nom d'utilisateur et mot de passé. Sélectionnez votre émetteur "Relay G30/G50/G90 Bodypack ". Tout en cliquant et en maintenant le commutateur ‘’VALUE’’ déplacer le commutateur ‘’ON/OFF’’ à la position ‘’OFF’’ et cliquer 8 fois sur le bouton ‘’ SELECT’’. Vous devriez maintenant voir le message ‘’LOADER’’ sur l'écran du émetteur. Cliquez sur OK dans Monkey. Une connexion avec l' (Si vous recevez un message sur l'écran que la connexion a échoué, il suffit de repositionner le émetteur jusqu'à ce message disparait). Choisissez Flash memory et cliquez "Update Selection" pour démarrer la mise à jour. Accepter le contrat de licence et cliquez sur ‘’OK’’ Cliquez sur ‘’ Yes’’ dans la fenêtre suivante. L'état d'avancement de la mise à jour peut être vu sur l'écran du XD-V75 et peut prendre quelques minutes. Allumez le emetteur tout en maintenant ‘’SELECT’’après la mise à jour est terminée, l'écran vous montrera le nouveau numéro de version Déconnectez le câble d'alimentation du récepteur XD-V75. REMARQUE: Si votre émetteur G30 n’est pas reconnu par Monkey, essayez s.v.p. de choisir « Relay G30 Bodypack (1.0) » (firmware 1.0) dans Line 6 Monkey afin de vous connecter à l'émetteur. Pour vous connecter aux transmetteurs avec le firmware 1.01 ou ultérieurs, vous devez sélectionner « Relay G30 Bodypack » dans Line 6 Monkey. ***Si vous mettez à niveau un émetteur: S'il vous plaît utilisez le lien Référence visuelle pour une référence visuelle sur la façon de placer l'émetteur au récepteur XD-V75 pour une communication de données optimale.
  20. Deutsch Français Q: Can I use multiple transmitters with 1 receiver? A: Yes, you can use multiple transmitters with 1 receiver, however not at the same time on the same channel. The best practice for that type of usage is to have Transmitter A on channel 1 and Transmitter B on channel 2. Then switching the channel on your receiver from channel 1 to channel 2 will toggle which transmitter you will be hearing. You can do this with as many receivers as you have channels, provided each transmitter is on a different channel and you change the channel on your receiver accordingly. You can also set multiple transmitters to one channel, and turn them all off except for the one you'd be using. This way, when you switch instruments, you'd turn off transmitter A on the first instrument, then pick up the next instrument and turn on transmitter B. Just be sure that no one else using a Line 6 wireless system is using the same channel. Q: Does USB 3.0 create interference in the 2.4GHz frequency range? A: USB 3.0 computer cables and peripherals, including hard drives, are known to emit radio frequency interference throughout the 2.4GHz band, which results in reduced range and/or performance for any 2.4GHz device in its proximity (including wireless keyboard or mouse, WiFi, etc.). We recommend placing any digital wireless receivers at least two meters away from the USB 3.0 device and its cabling. Below is a link to a study by Intel regarding this interference. http://www.intel.com/content/www/us/en/io/universal-serial-bus/usb3-frequency-interference-paper.html Suggested channels settings to avoid interfering with Wi-Fi. If your wifi network utilizes the channel listed, use the channel # listed under the Line 6 wireless channel column. Q: Are all Line 6 wireless transmitters and receivers interchangable? A: Yes, any Line 6 brand wireless transmitter or microphone will work with any Line 6 receiver. It does not matter if they are XD-V or Relay systems, you can mix and match receivers with transmitters and they will work as long as the transmitter and receiver correspond to the same channel. Q: Is the Relay G5/G90 transmitter compatible with the X2 receiver (or vice versa)? A: Both systems run in completely different frequency ranges, so they are not interchangeable. However, the X2 and Relay units can be used on the same stage (along with any other analog wireless systems) with no problems. Q: Where do I get a Relay G50/G90 Series Wireless System? A: The Relay G50/G90 wireless units are available at all authorized Line 6 dealers. To locate a dealer near you, please see the Line 6 Dealer Finder: Line 6 Dealer Finder Q: Where can I purchase replacement Relay G50 transmitters (TBP12) or receivers (RXS12)? A: Individual transmitters and receivers can be ordered from any Line 6 dealer. Q: What are the specs on the provided Relay G50 Series power supply? A: 9V DC, 500mA, center pin negative (2.1mm). See the following link for more power supply FAQs: Power Supply and Amp Power F.A.Q. Q: How is the Relay G90 receiver powered? A: The Relay G90 uses a standard IEC power cable. Q: Can I use a Voodoo Lab Pedal Power Plus 2 to power the Relay G50 receiver? A: Yes, but you will need to use the Voodoo lab "current doubler" cable and you will need to use outputs 5 & 6 of the Pedal Power Plus away from "normal" position. VooDoo model PPAP. Q: What type of cable do I need between my guitar & Relay TBP12 transmitter? A: The Relay G50/G90 Transmitter (TBP12) uses a TA4F to 1/4" cable. Q: What is the pin-out for wiring to a TA4F connector? A: Pin 1 - Gnd Pin 2 - V+ Pin 3 - Signal Pin 4 - Z (leave open for instrument)(short to pin 3 for mic) For a normal, everyday, run-of-the-mill, Tip/Sleeve (TS) connector for a 1/4" instrument cable end,... the signal goes from 1/4" Tip to TA4F pin-3 (Signal), and 1/4" Sleeve goes to TA4F pin-1 (Gnd). Don’t worry about pins 2 and 4, those are used for Lavaliere Mic connections. Q: How many channels does the G50/G90 have?? Do they share channels with the G30 system? A: The G50/G90 have 12 channels, which share the first 6 channels with the G30. Q: Can I use the TBP12 from a G50 to transmit to a G90 or G30 (or vice versa?) A: Yes. All 2.4gHz Line 6 transmitters work with all Line 6 2.4gHz receivers to the lowest limitation, channel count, features, etc. Q: What type of antennas work with the G50 and G90? G50: 1/4 wave antennas, BNC-type connectors; detachable. G90: 1/2 wave antennas. The antennas can be detached but RG58-50 ohm radio wire connection is required. Be sure the antennas are not inside a metal case or touching any metal and get your antennas as high as possible. Q: How long does the pair of AA batteries in the transmitter typically last? A: 8 hours on high power & 11 hours on low power. If you leave the transmitter cable plugged but turn the power off on the transmitter, there is no battery draw. Q: How does the battery meter work? A: The battery meter displays 20 minute increments. Be aware of "alkaline rebound" when turning off the unit and turning it back on, as it may look like it has more power than it really has. Q: Can I use rechargeable batteries? A: Yes, but the hours and minutes are calibrated to alkaline batteries so the power reading may be inaccurate. Some rechargables while labeled AA are not true AA size and will not work. Q: What is the difference between the main output and the tuner output? A: The only difference is the tuner output still works when the transmitter is muted. Q: What is different about the Relay G50/G90 system compared to the X2 series? A: The Relay system works on a higher frequency (2.4 Ghz) and operates on 12 channels rather than 5. Q: Can the RXR12 Receiver antennas be linked together? A: Up to 6 receivers can be daisy-chained together. The last unit in the chain should be "terminated" when linking receivers together. Q: I'm a harmonica player and would like to use the G30 with a bullet microphone (high impedance and high output). Its output peaks at approximately 3V to 4V. Will there be clipping or distortion of the output? A: No problem with either impedance or input level. The Relay transmitters (TBP06 and TBP12) will handle 6V inputs. Q: What does the red audio LED mean on the G50 receiver? A: It means the incoming signal is clipping. This will not produce an audio dropout unless the red LED is on for a few seconds. This state will not damage the receiver. Q: How do I register my Relay G50/G90 System? Line 6 Product Registration F.A.Q. Q: What do the different colors states mean on the TBP12 transmitter? TBP12 LED States: Blue LED = full Solid red LED = Low Flashing red LED = Very Low / Change batteries Audio LED - Green LED = Audio Signal F.A.Q. zur Relay G50/G90 Serie Kann ich mehrere Sender mit einem Empfänger verwenden? Ja, aber nicht gleichzeitig auf den selben Kanälen. Für diese Nutzung schalten Sie am besten Sender A auf Kanal 1 und Sender B auf Kanal 2. Wenn Sie dann auf dem Empfänger von Kanal 1 auf 2 wechseln, wechseln Sie den Sender, den Sie hören. Sie können das mit sovielen Empfängern machen, wie Sie Kanäle zur Verfügung haben, solange Sie die Sender alle auf verschiedenen Kanälen haben und den Kanal des Empfängers demnach anpassen. Sie können auch mehrere Sender auf den selben Kanal stellen und dann alle abschalten, mit Ausnahme von dem, den Sie verwenden möchten. So können Sie Instrumente wechseln indem Sie einfach den Sender des Instrumentes A abschalten und einfach den Sender des Instrumentes B einschalten. Stellen Sie aber sicher, dass keine anderen ein Line 6 Wireless System im selben Kanal wie Sie verwenden. Entstehen Interferenzen durch USB 3.0 im 2,4GHz Frequenzbereich? USB 3.0 Computerkabel und –geräte sind dafür bekannt Interferenzen bei Radio Frequenzen im 2,4GHz Bereich zu erzeugen was zu verringerter Reichweite und Performance für alle 2.4GHz Geräte (inklusive kabellose Tastatur oder Maus sowie WiFi und viele andere) in der Nähe führen kann. Wir empfehlen alle digitalen Kabellosempfänger mindestens 2m von den USB 3.0 Geräten und deren Verkablung weit weg zu plazieren. Nachstehend können Sie einen Link zur Untersuchung von Intel über Interferenzen mit USB 3.0 finden: http://www.intel.com/content/www/us/en/io/universal-serial-bus/usb3-frequency-interference-paper.html Sind alle Line 6 Wireless Sender untereinander austauschbar? Ja, alle kabellosen Line 6 Sender oder Mikrofone funktionieren mit jedem Line 6 Empfänger. Es macht keinen Unterschied ob diese XD-V oder Relay Systeme sind. Sie können Empfänger und Sender mischen wie Sie wollen und dies wird funktionieren solange Sender und Empfänger den gleichen Kanal haben. Ist der Relay G50/G90 Sender kompatibel mit dem X2 Empfänger? (oder andersrum) Beide Systeme laufen auf vollkommen unterschiedlichen Frequenzbereichen und sind somit nicht kompatibel. Sie können jedoch zusammen auf der selben Bühne verwendet werden. (zusammen mit anderen analogen, kabellosen Systemen) Woher bekomme ich ein Relay G50/G90 System? Die Relay G50 und G90 Systeme sind bei allen autorisierten Line 6 Händlern erhältlich. Um einen Händler in Ihrer Nähe zu finden, klicken Sie folgenden Link an: Line 6 Dealer Finder Wo kann ich Relay G50 Ersatzsender (TBP12) und –empfänger (RXS12) kaufen? Einzelne Sender oder Empfänger können Sie bei Ihrem Line 6 Händler bestellen. Was sind die technischen Daten des Netzteils für die Relay G50 Serie? 9V Gleichstrom, 500mA, negativer Zentralpin (2.1mm). Klicken Sie folgen Link um weitere Informationen bezüglich Netzteilen zu erhalten: Power Supply and Amp Power F.A.Q. Wie sieht die Stromversorgung des G90 Empfängers aus? Das Relay G90 benutzt ein standart IEC Stromkabel. Kann ich ein Voodoo Lab Pedal Power Plus 2 benutzten um den Relay G50 Empfänger zu betreiben? Ja, aber dazu brauchen Sie ein Voodoo Lab "doubler" Kabel und Sie müssen die Ausgänge 5 und 6 des Pedal Power Plus verwenden, die auf "normal" eingestellt sind. Klicken Sie auf den folgenden Link um mehr Informationen über "doubler" Kabbel von Voodoo Labs zu erhalten: Voodoo Lab Kabel Welche Art Kabel brauche ich für die Verbindung zwischen Gitarre und Relay TBP12 Sender? Der Relay G50/G90 Sender (TBP12) verwendet ein TA4f zu ¼" (6.35mm) Kabel. Wie sieht die Pinbelegung für einen TA4F Stecker aus? Pin 1: Masse. Pin 2: Postiv. Pin 3: Signal. Pin 4: Z (Nicht anschließen bei Instrument) (Kurzschließen mit Pin 3 für Mikrofon) Wieviele Kanäle hat das G50/G90? Teilen sie sich Kanäle mit dem G30 System? Die G50/G90 Systeme haben 12 Kanäle und sie teilen sich die ersten 6 mit dem G30. Kann ich das TBP12 eines G50 verwenden um an einen G90 oder G30 zu senden? (oder andersrum?) Ja. Alle 2.4GHz Line 6 Sender funtionieren mit 2.4GHz Line 6 Empfängern. Welche Antennen funktionieren mit den G50 und G90? G50: Viertelwellen-Antennen, BNC Stecker; abnehmbar. G90: Halbwellen-Antennen. Die Antennen könne abgenommen werden, dann ist aber eine RG58-50Ohm Funkverkablung notwendig. Stellen Sie sicher, dass die Antennen sich nicht innerhalb einer Metallkiste befinden oder Metall berühren. Stellen Sie die Antennen imemr so hoch wie möglich auf. Wie lange hält ein Paar AA Batterien in einem Sender? 8 Stunden auf High Power und 11 Stunden auf Low Power Einstellung. Wenn Sie das Kabel des Senders stecken lassen während der Sender ausgeschaltet ist, dann wird kein Strom verbraucht. Wie funktioniert die Batterieanzeige? Die Batterieanzeige aktualisiert in 20 Minuten-Intervallen. Achtung bei Alkaline Batterien kann es sein, dass Ihnen eine falsche batteriemenge angezigt wird nachdem Sie das Gerät abgeschaltet haben und wieder einschalten. Dies ist ein bekanntes Problem mit Alkaline Batterien. Kann ich aufladbare Batterien verwenden? Ja, aber die Stunden/Minuten-Anzeige ist für Alkaline Batterien konfiguriert und wird so ungenau. Manche aufladbaren Batterien, auf denen AA steht sind nicht in Wirklichkeit AA Batterien und passen somit nicht. Was ist der Unterschied zwischen Main Ausgang und Tuner Ausgang? Der einzige Unterschied ist, dass der Tuner Ausgang auch dann weiterläuft, wenn der Sender stumm geschaltet ist. Was ist der Unterschied zwischen G50/G90 und X2 Serie? Das Relay System läuft auf höherer Frequenz (2.4GHz) und 12 Kanälen anstelle von 5. Können RXR12 Empfänger Antennen verbunden werden? Ja, bis zu 6 Empfänger können in eine Kette geschaltet werden. Die letzte Einheit der Kette muss einen Abschlusswiderstand angeschlossen haben. Ich bin ein Harmonikaspieler und würde gerne das G50 mit einem Kugelmikrofon benutzen (hohe Impedanz und Ausgang). Der Ausgang befindet sich da höchstens bei ca. 3V oder 4V. Wird dies zu Übersteuerung oder Verzerrung am Asugang führen? Nein, weder Impadanz noch Eingangspegel sind hier ein Problem. Die Relay Transmitter (TBP06 und TBP12) kommen mit Eingängen von bis zu 6V klar. Wie kann ich mein G50/G90 System registrieren? Line 6 Product Registration F.A.Q. Was bedeuten die verschiedenen LED Zustände des TBP12? Blaues LED: Batterie voll. Durchgehend leuchtendes rotes LED: Batterie schwach. Blinkendes rotes LED: Batterie fast leer, bitte ersetzen. Audio LED – Grünes LED: Audio Signal vorhanden. F.A.Q.: Les séries Relay G50 et G90 Est-ce que je peux utiliser plusieurs émetteurs avec 1 récepteur? Oui, mais vous ne les pouvez pas utiliser en même temps sur le même canal. Le plus simple est de mettre transmetteur A sur canal 1 et transmetteur B sur canal 2. Si vous changez le canal sur le récepteur, de canal 1 sur canal 2, ca aussi change quel transmetteur vous pouvez entendre. Vous pouvez faire ca avec autant de récepteurs que vous avez canaux. Chaque transmetteur doit avoir un canal différent et vous changez le canal sur l'émetteur. Vous pouvez également mettre plusieurs transmetteurs sur le même canal et éteindre tous sauf pour l'un que vous voulez utiliser. Comme-ca, si vous changez les instruments, vous pouvez éteindre transmetteur A sur le premier instrument et allumer le transmetteur B du deuxième instrument. Attention, vérifiez que personne n'est en train d'utiliser des appareils Line 6 sur le même canal que vous. Est-ce que USB 3.0 crée des interférences dans la gamme de fréquences 2,4 GHz? Les câbles et périphériques USB 3.0 sont connus pour émettre des interférences de fréquence radio dans la bande 2,4 GHz, que cause une gamme et/ou performance des appareils 2.4 GHz réduite dans la proximité. (Y inclus sont les claviers ou souris sans fil, WiFi, etc.) Nous recommandons de placer le récepteur sans fil numérique au moins 2 mètres loin des appareils USB 3.0 et ses câbles. Voici un lien vers une étude réalisée par Intel au sujet de cette interférence: http://www.intel.com/content/www/us/en/io/universal-serial-bus/usb3-frequency-interference-paper.html Est-ce que tous les transmetteurs et émetteurs Line 6 sans fil sont interchangeables? Oui, tous les transmetteurs et microphones sans fil de Line 6 fonctionnent avec des récepteurs Line 6. Si vous utilisez des systèmes XD-V or Relay, ce n'est aucun problème. Vous pouvez mélanger tous les récepteurs avec les transmetteurs et ca fonctionne à condition qu'ils correspondent au même canal. Est-ce que le transmetteur Relay G50/G90 est compatible avec le récepteur X2 (ou inversement)? Les deux systèmes travaillent en différents gammes de fréquence, donc ils ne sont pas interchangeables. Les appareils X2 et Relay peuvent être utilisés sur la même scène sans problème. (Ainsi que tous les autres systèmes sans fil analogiques) Où est-ce que je peux acheter les systèmes sans fil G50/G90? Vous les pouvez commander de n'importe quel distributeur autorisé. Où est-ce que je peux acheter des transmetteurs G50 (TBP12) ou récepteurs (RXS12) de remplacement? Transmetteurs et récepteurs individuels peuvent être commandés à partir de n'importe quel revendeur Line 6. Quels sont les spécifications d'alimentation Relay G50? 9V CC, 500mA, pin central négatif (2.1mm). Visitez le lien suivant pour plus d'informations concernant les alimentations: Power Supply and Amp Power F.A.Q. Comment est-ce que le récepteur G90 est allumé? Le Relay utilise un câble d'alimentation standard IEC. Est-ce que je peux utiliser un Voodoo Lab Pedal Power Plus 2 pour allumer le récepteur Relay G30? Oui mais vous devez utiliser le câble Voodoo Lab "doubler" et les deux sorties 5 et 6 du Pedal Power Plus sur la position "normal". Visitez le lien suivant pour plus d'informations sur les câbles "doubler" disponibles de Voodoo Lab: Câbles Voodoo Lab Quel câble est-ce que j'ai besoin pour la connexion guitar – transmetteur Relay TBP12? Le transmetteur Relay G50/G90 (TBP12) utilise un câble TA4f à ¼" (6.35mm). Quelle est le brochage pour câbler le connecteur TA4F? Broche 1 – Terre. Broche 2 – V+ Broche 3 – Signal Broche 4 – Z (laissez ouvert pour l'instrument)(court avec broche 3 pour connexion avec mirco) Combien de canaux est-ce que le G50/G90 a? Est-ce qu'ils partagent les canaux avec le système G30? Les G50/G90 ont 12 canaux et partagent les premières 6 avec le G30. Est-ce que je peux utiliser le TBP12 du G50 pour transmettre à un G90 ou G30? (ou inversement?) Oui, tous les transmetteurs Line 6 2.4GHz fonctionnent avec tous les récepteurs Line 6 2.4GHz. Quelles antennes fonctionnent avec le G50 et G90? G50: Antennes quart d'onde, connecteurs BNC détachables. G90: Antennes demi-onde. Les antennes peuvent-êtres détachés mais une connexion RG58-50 Ohm est nécessaire. Assurez-vous que les antennes ne sont pas dans un boîtier métallique ou touchent un métal. Mettez les antennes le plus haut possible. Combien de temps dure la paire de piles AA dans l'émetteur? 8 heures sur configuration "High Power" et 11 heures sur "Low Power". Si vous laissez le câble branché mais vous éteignez l'émetteur, il n'ya pas de vidange de la batterie. Comment est-ce que la jauge de batterie fonctionne? La jauge de batterie affiche des incréments de 20 minutes. Parfois, la jauge peut vous indiquer plus de batterie qu'en réalité disponible. C'est un problème connu avec les batteries alcalines. Est-ce que je peux utiliser des batteries rechargeables? Oui, mais les heurs et minutes sont calculés à partir des batteries alcalines, donc peuvent êtres inexactes. Quelques batteries rechargeables Certains rechargeables tandis étiquetées AA ne sont pas vraies AA et ne fonctionneront pas. Quelle est la différence entre la sortie Main et la sortie Tuner? La sortie Tuner fonctionne si le transmetteur est mis en sourdine. Quelle est la différence entre les systèmes G50/G90 et la série X2? Le Relay fonctionne sur la fréquence plus haute de 2.4GHz avec 12 canaux plutôt que 5. Est-ce que les antennes de récepteur RXR12 peuvent-être reliées? Jusqu'à 6 récepteurs peuvent être chaînés. Le dernier appareil dans la chaîne doit être "terminé" si vous relies les récepteurs. Je suis un harmoniciste et je voudrais bien utiliser le G50/G90 avec un micro harmonica (impédance et sorite haute). Sortie d'environ 3V à 4V. Est qu'il y aura du clipping ou de la distorsion du signal de sortie? Pas de problème ni avec l'impédance ou niveau d'entrée. Les transmetteurs Relay (TBP12) peuvent traiter des entrées de 6V. Comment est-ce que je peux enregistrer mon système Relay G30? Vous le pouvez enregistrer ici: Enregistrement Line 6. États LED: TBP12: LED Bleu: Batterie pleine. LED Rouge continu: Batterie faible. LED Rouge clignotant: Batterie très faible, changez la batterie. Audio LED: Vert: Signal audio.
  21. Hi! Just got my Line 6 UX2 (with black front). In box there was Podfarm 2.5 CD included but i downloaded from internet. Installed everything needed: License manager, Line 6 Monkey and Farmpod 2.59. For some reason farmpod is not authorizing even tho my computer and UX2 are authorized under license manager. (images attached). Also i can't load or save tunes, what the f am i missing here ?? I'm running windows 10. Thanks in advance.
  22. Bonjour, je suis à la recherche d’un câble lightning qui relie mon iphone X à mon sonic port. J’ai actuellement le 30 broches. Pouvez-vous m’aidez? Merci d’avance.
  23. Hi, I'm sorry if the question has already been asked, I didn't find it. I'm trying to use my 500x as a MIDI controller for Mainstage. I installed everything I could (driver, license manager, pod edit...) and everything is working on Line 6 devices. My pod is being recognized by the edit software and I can use it. But my Pod doesn't seem to be recoginzed as a midi controller by my OS, only as an audio device. Therefore, nor Mainstage or Logic notice it in the settings. It doesn't appear in the "midi studio setting" too. I've tried to plug it with USB cable and MIDI interface, didn't work. My Mac only has USB C port, so I use a USB adapter. I read somewhere that it could be that, but I'm not sure, since the Edit software is perfectly working through this adapter. I'm on macOS Big Sur 11.0.1 Thanks!
  24. Deutsch Français 1: Connect the Mobile In to your iPhone or iPad using the 30-pin dock connector. 2: Connect your guitar or other audio source to Mobile In: Connect the 1/4" Tip Sleeve side of the cable into the output of your instrument, then Connect the 1/8" Stereo Male end of the cable to the 'GUITAR IN' on the Mobile In adapter. Connect both of the 1/4" Tip Sleeve cable connections to the left and right outputs of your audio source, then connect the 1/8" Stereo Male end of the cable to the 'LINE IN' on the Mobile In adapter. 3: Launch GarageBand. From the Instruments Menu, select the Guitar Amp. From the Guitar Amp Screen, tap the guitar cable button in the upper left hand corner and turn the monitor on. From the Instruments Menu, select the Audio Recorder. From the Audio Record Menu Screen, tap the guitar cable button in the upper left hand corner and turn the monitor on. From the Instruments Menu, select the Sampler. From the Sampler Screen, tap the guitar cable button in the upper left hand corner and turn the monitor on. For more information on using GarageBand checkout the the User Manual Here. For a Video on Mobile In Connections, . Handhabung des Mobile In mit GarageBand für iOS: 1. Verbinden Sie Ihr Mobile In mit Ihrem iPhone oder iPad anhand des 30-Pin Steckers. 2. Verbinden Sie Ihre Gitarre oder andere Audioquelle mit dem Mobile In: Stecken Sie den 6.35mm Stecker in den Ausgang Ihres Instrumentes und dann den 3.5mm Stecker in das "Guitar IN" des Mobile In Adapters. Stecken Sie beide 6.35mm Stecken in den linken bzw. rechten Ausgang Ihrer Audioquelle und verbinden Sie dann das 3.5mm Ende mit dem "LINE IN" des Mobile In. 3. Starten Sie GarageBand. 4. Im Instrumente Menu, klicken Sie auf Guitar Amp. 5. Von diesem Fenster aus klicken Sie oben links auf das Gitarrenkabel und schalten Monitor an. 6. Im Instrumente Menu, klicken Sie auf Audio recorder. 7. Von diesem Fenster aus klicken Sie oben links auf das Gitarrenkabel und schalten Monitor an. 8. Im Instrumente Menu, klicken Sie auf Sampler. 9. Von diesem Fenster aus klicken Sie oben links auf das Gitarrenkabel und schalten Monitor an. Für weitere Informationen über GarageBand sollten Sie das Benutzerhandbuch zu Rate ziehen. Für ein Video über die Mobile In Anschlüsse, klicken Sie dann . L'utilisation de Mobile In avec GarageBand pour iOS: 1. Connectez votre Mobile In à votre iPhone ou iPad en utilisant le connecteur 30 broches. 2. Connectez votre guitare ou source audio au Mobile In. Connectez la prise 6.35mm à la sortie de votre instrument et la prise 3.5mm au "GUITAR IN" du Mobile In. Connectez les prises 6.35mm à la sortie droite et gauche de votre source audio et la prise 3.5mm au "LINE IN" du Mobile In. 3. Démarrez GarageBand. 4. Sélectez "Guitar Amp" dans le menu Instruments. 5. Dans cette fenêtre, tapez le câble guitare dans le coin supérieur gauche et activez Monitor. 6. Sélectez "Audio Recorder" dans le menu Instruments. 7. Dans cette fenêtre, tapez le câble guitare dans le coin supérieur gauche et activez Monitor. 8. Sélectez "Sampler" dans le menu Instruments. 9. Dans cette fenêtre, tapez le câble guitare dans le coin supérieur gauche et activez Monitor. Pour des informations supplémentaires sur l'utilisation de GarageBand, utilisez ce mode d'emploi. Pour un vidéo sur les connexions Mobile In, .
×
×
  • Create New...