Search the Community

Hi everyone, Previously, I have used my POD Go in combination with my laptop (Windows 10) via USB. I was able to automatically get my Windows sound to play through my POD Go, and hear both desktop audio and my guitar via the headphones output. I could jam along with YouTube backing tracks playing from my PC without any issues. Now, on my new PC (Windows 11), I do not seem to be able to get the audio from my PC to play through my POD Go using USB at all. My POD Go is recognized by the POD Go edit software. I've installed the drivers both automatically with the Edit software, and later on individually as well in an attempt to solve the issue. The POD Go is fully up to date (Firmware 1.4). I'm not sure if it's supposed to, but the POD Go doesn't show up in my output sound devices. I am not using any DAW software and am only trying to use my POD Go in combination with desktop audio. I am aware of the aux in workaround, but would prefer using the already existing USB connection. If you happen to know what is going wrong, or if I can provide any additional information to clarify the situation, please let me know!

I have uploaded my Pod Go .pgp patches, and when they are downloaded, they change extension to .l6t (original uploaded files were .pgp). I have tried this numerous times, with same results. It seems like a bug. Does anyone knows how to resolve this? This is an example: https://line6.com/customtone/tone/5879890/ You will notice that it is uploaded and marked as Pod Go (.pgp) file, but still... I would appreciate any help.

I noticed that when switching off a certain effect, say the multitap effect (or any other echo/reverb effect for that matter), the active part instantly gets cut off. Perhaps most of the times this doesn't matter too much, but it would be great to have some control over it. Ideally I'd like to be able to let the old effect 'run its course' and not instantly be cut off. I do understand that DSP power could hit a ceiling when there is a lot of dying-out effects still active. But as long as I'm switching off effects, I don't think that DSP will hit its limit. Instead there could be an option to cut off the old effect when I engage a new effect. Would such a setting be possible?

I am experiencing lots of crashes with the POD Go ASIO driver in Windows using Ableton Live 11. Recording goes fine until you switch off the power of the POD Go. That will almost always result in a fatal blue screen of death. So I'm suspecting a driver fault. Does anyone else have similar problems?

It worked well until last week, but when I ran it today, it didn't proceed anymore on the first screen, so I searched on Google and tried line 6 update again. However, as in the last picture, the update continues to fail, leaving a question. What should I do to make it work again? I updated the latest software and changed both the USB line and USB port location, but only the same screen appears. when i choose update 1.30 on line6 update, it begins, but soon usb disconnect sound comes out and failure screen comes out. I've already tried several times as shown in the manual, but it failed. Please help me more detail pictures: https://www.mule.co.kr/bbs/community/mulein?v=v&idx=57805254

Hey ! I got a Pod Go and I'm starting to add presets and make pedalboards and one thing I can't figure out: Sometimes I want to play in stomp mode and sometimes I want to use snapshots. I know I can switch these modes with the two left footswitches and that's all good but sometimes I'm in stomp mode and what I see is the row of effects across the top and the parameters for whatever effect is currently showing. When I'm already in stomp mode and I don't want to see that screen, but I want to see the screen with the 6 effects showing which switch each is assigned to, how do I do this without bending over and pressing the view button? Is there a way to assign this function to a footswitch I'm not currently using? Seems crazy I have to bend down and push a button any time I want to see the pedalboard. Thanks

Hi! So, i got an frfr, Db technologies B-hype 10, as a birthday present and am using it for wet fx only with the pod go and my blackstar artist 10 AE as my dry amp (pg into fx loop). But now i would like to use the internal preamp of the blackstar as well with 4cm and still have the wet effects coming out of the frfr. Can this be done? My signal chain is: Guitar -> Guitar in (PG) -> amp out -> Blackstar fx-return and L/mono out(PG) -> Frfr Amp out is set to ”Pre cab”, the Cab-block is before the delay and reverb.

New to Pod Go. I purchased a Pod Go wireless system this week. Set it up properly (I believe). Updated the firmware. Did a backup. Did a factory reset. I'm using a Breedlove Legacy with LR Baggs anthem pickups. Loaded a patch, plugged in my wireless, and got tone to use the tuner. Plugged in the headphones and got crickets. Plugged into the back of an amp and got tone. Tried different patches, different presets, but still can only get sound through the amp and not the headphones. Tried using it connected to my pc using edit and also tried it without the pc just plain. I know this must be something completely basic that I'm screwing up. Thanks in advance.

1- include an ICE DELAY 2- include a Pitch Shifter that consumes less DSP covering POD GO 3- Trails between patches presets 4. ENGL Invader ou PowerBall 5. Display to see DSP percentage POD GO

I have a Pod Go, but i'm confused about the extra momentary switches you can connect. Is it possible to assign two more presets to the momentary switches when in preset mode, without switching banks?

Greetings, I play bass with my Pod Go at a venue that seats ~400 folks. Live performances only. The sound board is about 70 feet across the room. I have been plugging into random DI boxes, but I thought it might be good to eliminate the middle man (DI box) and plug the Pod Go directly into the XLR jack in the stage. I don't know if this is a great idea or a terrible one, and I haven't purchased the 1/4" TRS to XLRM cable yet to try it. I think it would work great, although someone said I may need a LIFT setting to break any potential ground loop. The Pod Go has no such setting/switch (as far as I can tell), although I believe some of the higher end Line6 stuff does. Is this a non-issue? If I use the balanced, 1/4" TRS main out of the Pod Go, do I still need to worry about separately dealing with breaking any potential ground loop? (Or does the Pod Go handle this for me?) Thanks so much in advance for your help with this! buzz

Hello everyone, I own a Pod Go and have been looking for presets to purchase and tweak to my liking. I've purchased many different presets, and really like them but I've also noticed that there are not many people selling presets for the Pod Go. Usually they are recreations of one of their Helix/HX patches adapted for the Pod Go. Lately, I've been watching YouTube videos of Helix and HX Stomp users making presets and giving their tips etc. On to my question... The Pod Go Edit software does NOT have the ability to open Helix/HX Stomp preset files, only Pod Go Edit files. Being that I don't have a Helix or HX Stomp is there a way I could purchase Helix/HX presets and view the amp/cab and other pedal settings? This way I can recreate them on the Pod Go. I'm not looking for freebies, but I just need to see the numbers to recreate them on my Pod Go. Is there software that might allow me to view the preset settings of the Helix/HX Stomp files? Thanks in advance for help with an odd request!

I just got my Pod Go a few days ago. It was a Friday, so I had over the weekend to play it before I had to go back to work. (Got a new Marshall DSL100HR too though, so the Pod Go had to share the stage. It got more than enough play though considering I can't play the marshall through haedphones without connecting up a bunch of other gear I don't feel like messing with when I now have Pod Go right here) Anyway.... I do quite a bit of recording with Reaper, and part of the reason the Pod Go appealed to me was the fact that it can be used as an audio interface. Infact, that was one of the main reasons. I wanted something to help me simplify my workflow when tracking, but that would not be a compromise on tone. Seeing as how Pod Go uses the same HX series effects processor as Helix and HX family of products.... Enter Pod Go.... Now, I like this thing alot. However, I have yet to be able to use it for what I bought it to use it for, which is recording. It needs ASOI drivers in order to be used an an A.I. correct? I've got it plugged up tp my PC, and my studio monitors, and I get sound, and the unit sounds good through the monitors, but can I just use it as is in Reaper? Or do I need the ASIO drivers? The info on the Line 6 site says I need the ASIO driver, but the only downloads I can find anywhere for Pod Go on the Line 6 website are the firmware updates, and updates for Pod Go Edit. Both of which are up to date at 1.30. Is it possible that I missed something, and the ASIO drivers are part of that download? Or is it something else all together? And if it is something different, where do I find it. I have to say, the way it was explained to me, this thing was supposed to be a great tool for me to use for recording, but as of right now, I have to say that the difficulty I am experiencing in trying to find out something/find something which should be right there out front and easy for anyone to find, it is making me a little worried that maybe I jumped the gun spending this money, and perhaps I should have just stuck with playing my tube amps through my Captor 16 and CAB M+..... If anyone else knows where I can find this, I would greatly appreciate it if you could fill me in as I'd love to become privy to such knowledge. If there is maybe a link that someone could share to the web page where the download is located, that would be even better! Thanks in advance for any assistance anyone out there may be able to offer.

Hi all, have you seen the latest YouTube video of Choptones? It seems they replaced the FX loop with a free block, in comments somebody asked about It but they don't have answered yet. Any idea? Thanks a lot

I have the pod go. On the headphones I can get a sound with crunch or gain to it, however when I plug into the house PA system or my practice amp at home. I cant duplicate the sound everything sounds clean. I have a gretsch 5622 and a Fender strat have the problem with both guitars. I've tried turning guitar up and output from Pod Go down, I've tried turning Pod Go out put up it doesn't matter. I'm playing with the vox amp on Pod Go. Any ideas? Thanks..

Hi! I just got the Pod Go and noticed it came with the 1.12 firmware so I then hooked it up to my Mac to update to the latest firmware. But the Pod go Edit just tells me that there are no updates available. I have tried and installed all the different versions of the pod go app but they all say the same thing. Also, I can’t handle my account from the app or enter the store(Get more IR’s button) It says that my computer doesn’t have a internet connection, but it does. Could it be that my computer is to old? It’s a Macbook pro from 2009. Please help! It would be nice to have that Princeton and glitch delay :).

Has there been any discussion of allowing the POD Go to transmit a MIDI clock based on the tempo setting. That would be helpful for eliminating the need for an external clock and metronome for live performances.

Hi Why doesn't Line 6 support his own Variax users not anymore with the new products. Please create another version of pod go or HX stomp with a Variax input and if possible (of course it is) an SP/dif as well. Please support the users of your own brand....

Okay, let me first say, I have plenty of common sense and I could easily infer a conclusion that has high probability of being accurate. Actually, I already do have an assumption that I'm pretty sure is reflective of the fact. But I dont know it to be a fact so I'm only looking for the people who know the facts, i.e. cite me a source or give me directions where I can find the information cause I've look and quite frankly, this is not my area of expertise so I dont know what is marketing BS phrasing to sell an item cause it leads people to believe 2 things are the same when in fact they are not vs statements of factual reference. So the question is, are the fx in the POD go the same exact algorithms and scrip as Helix FX or Not? Either they are or they are not. So if you have to add some bit of information, clarify or say "Yes, But..." Then for my purposes, thats a no. And actually truth be told, all I want is a yes or no. Cause if the answer is they are the same, then thats all I need to know. But if the answer is no, then I will go do the research myself. I dont mind trying to find out the information. but looking for something that possibly doesn't exist would mean a lot of wasted time if they are the same. Unfortunately, no offense to anyone here but the trolls, we all know they exists and the fact I have said I'll continue the research if I'm told no they are not the same means I I have to have a reason from you as to why you would say that just cause I dont trust anyone and I dont wanna waste my time doing research cause some guy, kid i mean, parents hate him. I dont know if they beat him, but they dont love him so he then find joy is infecting the world with negative troll energy! Sorry, everyone pays the price for that. Its like I dont during a storm thinking every bolt of lighting is the one that was suppose to kill me. But I also dont carry a metal umbrella around holding it up so that on homicidal bolt of lighting knows where the easy kill is. Let me just end by saying as heavy handed as this comment is, it is no where close to accurately being a reflection of this community. cause 99% of the people here are awesome dude who are great guitarist, or even better, new guitarists who dont care about how they sound today, they keep practicing cause they know tomorrow they will play something they are proud of. I know thats most people here. But thats all I needed, 2 sentences and 99% of the people get it. Some troll is still not gonna get the fact that I know they are out there, and I'm more than happy to embarrass you. But without this, then when I'm a lollipop in return, doesnt that just make me a troll too? But I've laid out the rules of the game, so I take no issue in treating anyone like a POS if thats how they wanna be treated. Everyone else gets respect and should someone say something profound out side of anything I considered, well, I'll let you know the day that happens. but i do say thank you to people who correct any information that I have got wrong. I could care less about winning arguments, all I want is to leave a conversation with the most accurate information we can figure out together that accurate. This is my first comment in this group, and thats why this is detailed. Cause I'll keep this so people can reference the fact I dont change my tune and should I say anything that conflicts with what I've stated today, I'd expect to be held accountable. So not that I've said what I've had to say, I wont have to say it again and lets get on with business!

add the Trail function between one preset and another, or have 5 editable blocks.

Just got a pod go recently and noticed that when I turn the unit off and then sometime later turn on it go use it my customers presets are gone. I have noticed that upon power up it says demo mode active, will reset all. I have searched everywhere and can not find anything on how to turn this demo mode off. Anyone else run into this issue?

Hi Everyone - Did anyone else get a white horizontal line appear in the middle of their pod go display after updating to 1.21? I pixel wide all away across the middle just where the top of the blocks start. IMG_9817.HEIC IMG_9818.HEIC

Love the Pod Go. Mystified, however, by the 3 Note Generator. Is it possible to play guitar at the same time as the 3NG is turned on? In Helix, this seems possible based on some videos I've watched, but Helix has multiple signal paths and Pod Go just one. There's a Dry Signal level, which at first glance I thought might refer to the level of the guitar, but it seems to do nothing. Any suggestions? Has anyone figured this out? If there's no way to have the guitar make a noise at the same time as the 3NG or affect the sound in any way, it seems a strange thing to include in the Pod Go. What am I missing?