Search the Community
Showing results for tags 'pod'.
-
Hi, I just set up my pod farm on a new computer and I authorized it in the manager but when I open pod farm, it says It's not authorized. I really wanna start jamming on pod again so how do I fix this? Thanks -
Has anyone had success (or failure) using old/legacy Line6 Floorboard from POD Pro setup? (see attached picture) I'm considering getting the Amplifi amp and hoped my Floorboard would work. Any suggestions on top 2 pedal options (I like having 2 pedals for VOL and WAH)?
-
Line 6, why not develop the same wireless GUI for POD family products ?? What an awesome move! - playing live, making tweaks on the fly with the sexy, remote AMPLIFi-style GUI . Would this development be an ROI issue ? Looking forward to some feedback. (oops - just went over to the Amplifi Fx 100 thread . Looks like this could fit there)
-
Hey! I just bought a Floor Pod Plus used. Wondering if there's a way to equalize all the output without having to manually do it? Like when I switch from 29A to 29B for example, the volumes are wayyy off.
-
Hey guys, I've had my 500X for quite some time now, and am still having issues. When recording on my MacBook, I get a terrible buzzing noise, almost feedback, in my DAW. Whether it's garageband or Reaper. Here's the first video I did with it, you can hear the noise. I'm recording via USB. My cover of FaceDown The actual song for sound comparison The noise is very distinctive.. Almost uncatchable. But the strange thing is, is when I use my acoustic, it's silk smooth. Just like glass. But with an electric, whether it's my schecter, or Gibson LP, it's got that god awful noise. Honestly, I'm almost thinking about sending it to Line 6 and seeing whether they can fix it or not. Yeah, I made a few mistakes. Lol Thanks guys.
-
I am also using a fbv express pedal board. I am trying to figure out how I can go from a patch with a delay to a (lets say) a distortion with the delay ringing out and not just cutting off when I switch patches. Can this be done? Please help. Thanks.
-
Hello all, I have a POD 2.0 running firmware v2.2 and controlling it with an an original Line 6 Floorboard: I am trying to map my POD 2.0 Floorboard controls so that I can control parameters in Guitar Rig Pro 5. I have seen videos and posts on users using the newer Line 6 floorboard models with Guitar Rig Pro but I have no clue on how to do this with the original POD 2.0 Floorboard. I have my MIDI INs and OUTs connected correctly and Ableton is showing that I am transmitting MIDI signals from my Floorboard. However, I cannot seem to find the right software to manually map the POD 2.0 MIDI CC#'s so that Guitar Rig Pro 5 can see them. For instance, when I move my volume pedal on my Line 6 Floorboard, I would like it to control a knob in Guitar Rig Pro 5. I have installed Line 6 Edit and Line 6 Monkey which I don't think helped my situation. Has anyone done anything similar with the original Line 6 Floorboard? With the amount of POD 2.0's still out there, I'm sure someone has tried to connect their gear with Guitar Rig Pro or Amplitube? Can anyone help me out? Thanks. -
Hey, I just got a POD500 from the US. Obviously, the power adapter is different. I know the output is 9V - 3A. Will my Voodoo Labs Pedal Power 2 Plus power this up? or do I need to a) get a AUS Power Supply for the unit or b) get a step down transformer for it? Cheers. :)
-
I'm trying to record vocals but it doesn't seem to be working. I plugged my microphone into the pod mic input then turned on the phantom power to power my condenser microphone and then went on a new tone with nothing on it. my pod unbalanced outputs are plugged into my speakers (like normal) and the pod is connected to my daw by usb but when i arm the track it picks up no audio at all but the little green signal light on the pod is flashing when i talk into the mic haha someone please help me! thanks
-
Hello, I connect my XLR outputs on the PODHD500X to a set of KRK Rockit 5 monitors, and the signal is extremely weak and I have to crank the level on the speakers, the level on my monitor controller, and the master output on the POD to get adequate volume out of the speakers. I have even started boosting the levels on the mixer to about +3 dB, but I don't want to go higher than that cause I don't know if I am clipping. I think it is pathetic that there is no indicator on the pod to tell you if you are clipping or not. Is there any way I can monitor this? There is an output meter on POD Farm, but not in the HD Edit software. Thanks in advance
-
Hello, so I recently bought an HD500x, which I use as an audio interface for my speakers, and mainly to record stuff with my guitar (mostly for guitar covers). But, I've got an M-audio keystation 61es, so my question is, can I use this as Midi through the HD500x to record stuff with, and can I use HD500x presets for the keystation, and if so, how do I do this? Because I want the sound from the keystation to come from the same speakers as my HD500x (my guitar, spotify, all that). I would also like to get other effects and stuff out of it, instead of just the regular piano. And IF this is NOT possible, do you guys have any suggestions of software that can do this? Thanks.
-
Hi there Apologies for this very simple, but I am just starting out with this stuff!! I have a guitar, a windows laptop, a POD HD500X. I would like to record a solo over a backing track that I have on mp3 and I have no idea which software I need to do this. I have worked out how to USB the guitar signal from my POD into the laptop so that works, but I dont know how to do the actual recording and layering of any tracks, etc. I tried some software called Stagelight, but it just stopped working so does anyone know anything else I can try? I am a massive beginner so simplicity is key for me!! Many Thanks to anyone who can help. Phil -
I have a POD HD500 that i have just recently bought. I have previous experience with this pedal, but have never run into an issue like this one. I will do my best to explain this without getting anyone confused. I have 2 Computers. A custom build and a factory built Dell. The POD HD500 drivers will not properly install on my custom built PC, but install perfectly fine on the factory built Dell. The custom built computer is my primary computer and the one I am wanting to use for recording. This issue is very odd to me because i have previously had a friends HD500 connected to the custom built pc for 3 months and it worked fine. I haven't made any changes to the computer since then. I have tried installing the drivers as administrator, tried every USB port (which all work fine for any other devices). My PC recognizes the POD HD500 in the device manager, but is not recognized in Line 6 Monkey or HD500 Edit. I am at a loss and would appreciate any helpful advice.
-
I use Cubase to record guitar via POD HD500. I want to connect POD by USB and have ability to listen to a backing track from Winamp. Correct me if I'm wrong: 1. There's no way to send multiple audio sources to an audio card if you use ASIO. Which means if you connect POD via USB, you cannot hear guitar sound sent through Cubase (first source) and backing track from Winamp (second source). 2. You can, however, connect POD via Line In to an audio card and listen to both. Input signal from Line In is mixed internally by an audio card with signal from Windows kxmixer. ASIO in that case is not needed. Now a question: 3. If I have two audio cards in my PC, can I process signal from POD USB by first card, daisy chain both cards (Line Out to Line In) and then mix resulting signal on the second card and send output signal to speakers? This essentially means that Windows will have to send POD signal to first card and kxmixer signal to the second. I don't know if it's even possible. I'll probably need some signal routing software to accomplish that. Thoughts? -
Hi I have just ordered an L3 speaker to replace my existing guitar amp. It will be used in conjunction with my HD500 and JTV 59 giving me an FRFR rig. I have a question about the virtual tiltback function. What is the best orientation of the L3 when in 'electric guitar' mode being used as a backline? What are the pros and cons of positioning the speaker on its side rather than upright? -
I'm currently using a 1 x 12 50w Marshall tube amp with an HD500 and JTV 59. I'm convinced about the whole FRFR rig concept, especially as I play in a band covering everything from Metallica to mellow acoustic and need the versatility. The only thing I'm worried about is whether the L3 packs enough of a punch compared to my 50w Marshall. I'd really appreciate comments from you guys, especially those who have gone FRFR. Is the L3 loud enough??
-
I noticed the other day that on my POD HD500X, which I just bought in April, that the FS2 switch didn't change a couple of times when I pressed it. This was when I was sitting on the floor using my hands as I was using HD500X Edit with my laptop, so it wasn't when I used my foot. The way the footswitches are designed, they click, and then there is still some small distance that they travel downward before they stop. So there is by design a little play between the click point and the stop point. On that one footswitch, I tried pressing it with different amounts of pressure. On all of the other 7 footswitches, the red light changes the very instant that the "click" happens, even if I don't completely push the footswitch all of the way down. On FS2, the red light doesn't always change when the click occurs. I have to press it all of the way down sometimes, while at other times it DOES change right at the point of the click. Now this may seem trivial, and it may be, but I'm asking simply because 1 of 8 footswitches is behaving slightly differently. I think when using my foot I will always use enough pressure to change it, but if this is something that is not normal and could get worse so that it does become a problem, I'd like to know so I can address it. And since it's brand new, I want to make sure that even the slightest thing isn't working incorrectly. So, those of you with a 500X, do you notice the same thing and is this somewhat normal, or do all of the footswitches change exactly at the click rather than when the switch is pressed completely down all of the way?
-
Hi is it possible to control the Flextone 3 presets with a Pod Pro connect via MIDI? I have those 2 and I have also the Line 6 floorboard that controles the pod pro, but for my flextone 3 I don't have any FBV to control the flex tone 3 and I don't want to have 2 big floorboards on the floor when I'm playing, what I want is just to control all with the line 6 floorboard, Is it possible? Thanks Jorge -
Hello peoples of the Line 6 forum, I have some questions about the MIC input/output and routing on the HD500X: Is it possible to route the signal from the Mic Input to one of the Balanced Outputs, while simultaneously running the Instrument Input to one of the Unbalanced (1/4") outputs, so that when I play gigs I can route my mic through the pedal and give the FOH guy the Mic output separately from the instrument output (which I would give him from the DI in my amp, further down the signal chain, due to using more effects)? They key thing is I'm curious about keeping the instrument and mic outputs separate, so the channels can stay discrete on the FOH mixing board. Related to that, when using the Vocoder, will the effected sound pass through both the instrument and Mic outputs, or just one or the other? I.e. if running my instr and mic through the HD500X as separate channels (assuming that can be done), when I turn on the vocoder, will I hear the output through my instrument output only, the Mic/PA output only, or both? Finally, does anyone know if the HD500X will have additional effects/packages that can be applied to it? I'm a bassist, and it's very light on bass-specific stuff. I've always had an issue with buying pedalboards because they don't seem really futureproof sometimes. It would be nice if this platform will be somewhat expandable. Thank you!
-
I downloaded Lincoln Brewster's official HD500 presets from here http://www.lincolnbrewster.com/podpatches/ And specifically, the one named Lincoln_Brewster_Main_2012.h5e For some reason, this preset is much much louder than any preset I create myself without messing too much with the volume settings. I've turned off every effect/amp block and checked all of the levels, including DEPs and none are really any different than any settings I use in my patches, and this patch is still much louder than any of my patches. The only difference I can see is that at the mixer he has both R and L set to Center instead of the default !00% Left and 100% Right. Changing that makes some difference, but it seems like the volume difference is more than just that. I also changed the extension to .5xe to import on my HD500X. That shouldn't make any difference, should it? Is there something else I'm missing, or does centering the Mixer block actually really make that much difference in overall volume without actually changing any volume parameters?
- 9 replies
-
- 1
-
-
- lincoln brewster
- preset
- (and 4 more)
-
Good afternoon, I'm a proud owner of a PODxt Live for many years; It worked like a charm until a few weeks ago. Starting from the beginning, a year ago I broke the USB connector; Almost a month ago I decided to finally fix the USB port, so I changed the connector to a new one (I'm experienced with electronics), when I turned on the POD to try out the new USB connector, the POD simply wouldn't start; It flashed all the LED's and maintained them on, a brick with lights basically. The USB works just fine, I can access to the POD via PC but the Flash Memory is just not accessible; I checked every internal part on the POD, all the values are normal and nothing seems to be "broken". Is it possible that anyone can get me the Flash Memory full dump file of a PODxt Live so I can reprogram mine? Sorry for my bad English, Best Regards.
-
Hi, first of all, my english sucks, so im gonna try to do my best Its possible to change the amp value of the drive with a footswitch on the pod hd500x ? i've search all over the internet and all i've got is turn on and off effects and amps, but not how to change this. Please Help
-
Set on HD 500: Input 1: Guitar Input 2: Variax And make a chain with first effect an analog delay (memory man). When you play with guitar the memory man sounds. If you play with variax it doesn't sound at all. Anybody knows why / or can confirm the same issue?
-
I really wish Line 6 would bring back the blog. They used to have some great articles and really provided info we could use. Sure there was some fluff in there too but WTF? Why did it stop? Anyways, here are a couple more useful series they started. Doesn't look like the Guide to Home Recording quite finished but How to Record a Song and the Guide to Making YouTube Videos are complete. Guide to Home Recording - https://www.cx.com/0/io/hotlink/aoorcMpJEeOWfSICCluF4w/Guide%20to%20Home%20Recording.pdf How to Record a Song - https://www.cx.com/0/io/hotlink/gSTp1MpJEeONmiICCiuDbg/How%20to%20Record%20a%20Song.pdf Guide to Making YouTube Videos - https://www.cx.com/0/io/hotlink/mWQv2spJEeOWfSICCluF4w/Making%20Music%20Videos%20For%20YouTube.pdf Sure wish they would start this back up! So many more topics yet to be covered...
-
I really wish Line 6 would bring back the blog. They used to have some great articles and really provided info we could use. Sure there was some fluff in there too but WTF? Why did it stop? Anyways, going back through the archives I came across this series about delays and to preserve it for posterity (cause we never know when those pages will disappear) I put them in a PDF form. Looks like it was meant to keep going but something stopped them from continuing. Sure wish they would pick this back up and keep going across the full range of all the effects... Here is the link if you are interested... https://www.cx.com/0/io/hotlink/P_uZXsopEeOMhyICCluF4w/Deep%20Dive%20into%20the%20Effects%20of%20the%20POD%20HD%20Multi%20Effects%20Processors.pdf
