Search the Community
Showing results for tags 'pod'.
-
I had a hard time with acoustic from the DT but I came up with a solution that seems to work well. This patch works amazing with my DT25 head, 2X12 sealed cab with Celestion V30s and it should work fine with any other DT setup. It may not be perfect but it works with all 5 acoustic models. This setup provides the clean, unprocessed guitar signal from the Variax straight to the DT power section without ANY amp sims... I put a flip top in channel A, centered the mixers and then mute channel A. You can use any amp model in channel A, it is just a placeholder. I use it for low DSP. We are not running through the flip top at all. We are only using it to "lock" the DT from switching to the amp in channel B and to control the physical topology. By placing no amp in channel B and muting channel A in the POD we effectively send the clean "unamped" acoustic guitar signal straight to the DT power section through channel B! I set the topology to III in HDEdit and it just gets that nice sort of resonance you would expect from an acoustic. We also have to change the input to Variax-Same to ensure that our signal is passed to channel B. You may have to turn up the mixer levels for volume matching and add an EQ for tone shaping. I use a reverb in the chain too. I also use this setup for synth tones through the DT. Place all your synth and FX blocks in the B path or the post mixer and you will get the pure synth without the amp coloring just like with a FRFR solution. Here is a link to a set list with a couple of variations of this concept... try it out and give me some feedback if you like the idea or not... http://share.cx.com/yGRXwV -
Hey fellas, I've had a HD500X ever since they came out, and I love it. If you have an older model POD, you should seriously consider the upgrade. Anyway I have a few questions, hopefully some of you guys can help me out here.. Recording: I have a Macbook and I'm using an old version of Garageband from like, '09. I plugged in my acoustic to record Here Comes The Sun, and post it on Facebook. WOW! It sounded fantastic! Everyone asked me to do another cover and so I thought, ah, what the heck? Sure thing... I plugged in my LP, and switched it over to the assigned switches and played without doing a sound check. (Stupid) Five minutes later I'm playing it back, and it sounds like absolute crap! I was in shock compared to the acoustic! It is majorly distorted! Even on a clean assign, with or without an amp model. Long story long, what recording software are you guys using? I'd like to keep it under $150, and it has to be Mac compatible. (This is why I hate you, Mac) I have 2gb of Ram so any older versions of Logic, are kind of out of the question. (Logic demands to much for my old hunk of junk)... Second thing: I'm planning on doing a small little guitar session at my school. Play along with the art teacher who plays piano and do a cover of, Let It Be. Our school stage has imbedded XLR inputs on the stage, and then that runs straight to the sound system amplifier, then to the speakers. Now, I'm no technical advance kind of guy when it comes to stuff like this. It's all new to me. Even though I know computers like the back of my hand. I see on the back of the 500X that it's got two, what appears to be XLR, even though it says Balanced Left and Right. What I'm trying to do is just get the sound from my pod straight to those XLR inputs in the stage. Any ideas of what cable I would need? I feel like a 1/4 inch to an XLR would work, but what would those balanced be used for? (future reference) Thanks Guys.
-
good evening. as in object: could somebody tell surely what's the impedance at POD XT headphones plug? i have a 32 Ohms set and the sound quality is horrible, so I'd need to build an impedance corrector cable and to know precise values to do that. thanx, bye
-
Hi folks, I followed all the instructions (both video and manual) from Line6 and yt and I'm nowhere near to be able to control pitch shift (like Whammy) or Wah pedal in my chain of effects. What I do: 1. Put Wah pedal in chain of my preset, enter the switch assignment options and choose toe pedal to control wah effect 2. Result: effect is always on, and moving the expression pedal doesn't change anything In pre-made presets however I do can control volume level of some presets, and I also can control VOL level in my own made preset. I did calibrated pedal before using the POD HD500X What Am I possibly doing wrong?
-
Good day ! I seem to be having a problem when I play distorted and I have no idea if it's from the pod or my guitar . When I play distorted , I seem to be having a second distortion "behind" the distortion of the amp . It's a bright distortion , not loud but noticeable , and it sounds like when you have a slightly broken speaker that gives a crackling sound at certain frequencies. It's not because of my speakers , I recorded the sound and listened to it through different speakers and headphones . So it's either from the guitar or from the POD . It appeared out of the blue , after the last update but it turned up after a few days ( or I didn't notice it before ) Can anyone give me any advice ? Has anyone ever had this problem ? It's not from the jack input ... I took it out , all the wires are soldered , I cleaned it ... Thank you !
-
Hi I upgraded my POD Farm 1 tot 2.56 but I can't get all the amps. There comes an error and it sais I have to open the license manager, so I did but nothing happend. I don't no realy what to do to 'activate' it or whatever. I made a screen shot from what it happening on my screen. This is what I get when I open POD Farm 2.56: And then when I click on 'License manager' this is what I get: What do I need to do?? Help
-
While I really think this is a let down for most of us it probably is a big move up for a lot of beginning musicians and hobbyists. The price point is kept low by pushing a lot of the interface and system management off board to the user's own iGear. They also kept DSP needs low by using older modeling and saved more by not integrating a host of in/out options, no D/A or A/D conversions, etc. Trouble is that while this incarnation is disappointing, the concept has a lot of potential and I would not be surprised to see a professional version in the future. Same power section and speaker/cab options but with HD modeling as per the DT, the acoustic resonance DSP from the L2/3 series, M Series effects, professional in/out (XLR, 1/4, L6 link, VDI) and FX Loop. Manage all your patches and set lists from your iGear (or Droid hopefully) and everything cloud sourced. So where the DT was the perfect tube match for the POD HD, AMPLIFI HD would be the perfect stereo FR/FR match in a portable combo size package. If you need your pedals, bring your POD or floorboard with you too. L6 link could still allow you to expand by adding an L2/3 or sending a perfect feed to the Dream Stage. No reason the same cloud sourcing couldn't tone match for HD models too. Then you seriously could just grab your JTV and this one box, plug right in and be good to go. Great solution for solo gigs with backing tracks. Of course everything comes at a price. My guess is AMPLIFI HD150 comes in around $1200 and a $100 less for the AMPLIFI HD75. Anyone interested? :)
-
Any suggestions on how I can get a BIG sound with my POD HD desktop 2 amps? Mixer settings? Chorus effects? etc.... Thanks!
-
Pod Farm (ux2) Has Muffled, Dark Sound?
MichaelFJ posted a topic in POD Farm / POD Studio / TonePort
I got POD Farm a while ago with my UX2, but it has always had a bad sound. It sounds like it's being played through one of those little 9V-battery-powered amps, rather than a professional, high quality amp, even when the volume is turned up. No matter how much I turn up the gain (I've even boosted my treble to the max and cut the low-mids out), it still sounds like it's muffled, and it sounds really bad. Even when I plug the cable into it and it makes the buzzing sound that usually happens, even that sounds muffled. It sounds like I'm plugging it into a $15 interface rather than a professional guitar amplifier. NOTICE: I play different songs on YouTube that have the same settings as I use, and the songs I listen to there have a high-quality tone. So I'm almost certain it's not the speakers. HERE IS MY EQUIPMENT: -MacBook Pro (Mac OS X 10.8.5) PROCESSOR: 2.2 GHz Intel Core 2 Duo MEMORY:3 GB 667 MHz DDR2 SDRAM -Creative Inspire T3300 Speakers (They have a 1/8" input jack that I connect to the "headphones" input on the UX2 using an adapter) -High-quality guitar cable -Agile Interceptor Pro 930 with 30" scale and active pickups -This guitar is HIGH-QUALITY and has a very bright tone, and it should have one on POD Farm, but it doesn't. Is there a reason for the tone sounding really bad? Are there settings on my computer or something that I can change? OR could I upgrade my sound card? -
Good day , The title is not really the most appropriate ...but I didn't know how to call my problem , so allow me to explain . I connect my POD HD to the PC via USB and use it as an external sound card , I use it with my DAW to record . I set up my effects on the POD HD and my signal , with effects and all , is fed into the DAW . To the before-mentioned signal , I add effects directly from the DAW and I want to hear the sound in REAL TIME as I am playing . But when I want to hear it in real time , I hear the signal doubled : The RAW SIGNAL that is fed into the DAW from my POD HD and the RAW SIGNAL + DAW EFFECTS both come back through my headphones or speakers. Is there a way to mute this RAW SIGNAL , so I could hear only the signal that comes back from the DAW ?
-
Today, I have read several threads of people having what I perceive as genuine quality issues with their Line6 gear, including: - Howling headphone outputs - Footswitch issues - Firmware failures In my own world: - my POD HD500 indeed has an F3 footswtich that acts dodgy as hell and won't do what I assigned it to do much of the time. - I can assign FS2 to a volume pedal function, but it won't "take" and refuses to use anything but FS1 until I save the new preset and come back to it to change it after I go to any other preset. Then, it seems to work most of the time, but nbot always. - Last night, my brand new (October 2012) JTV59 developed a problem where the magnetic pickup selector switch (no modelling invloved) in the up (Neck) poitision went wonky and screached with static. While fiddling about with it, i noticed that moving the guitar to a resting on my lap position (resulting in a slight bump) caused it to fix itself for s short time. More movement produced intermittent cut outs. Troubleshot it to a loose connection inside the guitar somewhere (most likely) and even with my strong electronics background, I would sooner traverse razor wire than to open this thing up and try to sort that sure to be rat's nest all out. I guess what I am getting at is this; Since Yamaha just acquired Line6, as a person who works in business I know this acquisition likely took months to work through, so I wonder did quality slip while everyone at Line6 dotted their i's and crossed their t's in prep for the big day of announcement? I have to say that overall I am not too thrilled with the quality of what I have anyway, from a hardware and firmware standpoint. It's all well and good to spend $1500 buying two pieceds of gear that are supposed to effectly replace dozens of guitars, amps and effects UNTIL it ceases to work properly. At that point things change for me. Thoughts from the community on this?
-
Hello Recently I got a POD HD300 and I can't seem to get ahold of a decent tone for my 6string baritone tuned to Drop E. It's really muddy and undefined,I want a more digital tone,similar to Meshuggah-Tony Danza Tap Dance Extravaganza-Periphery etc. I have a .85 for a low E with on a 27,2'' with an EMG 81. A good example of what I'm after(or similar) is this https://soundcloud.com/thelivingdoorway/frederipoff-thordendal Any preset/info will be gladly appreciated. Thanks a ton and happy new year John
-
Hola, tengo un POD HD 400 y perdà el eliminador, o adaptador de corriente, he pensado, en contactar el distribuidor de mi paÃs (México) y adquirir el original, por un precio elevado, y bastante lejos, o comprar alguno con las mismas caracterÃsticas. Mi duda es: ¿Hay riesgo de que se queme el POD? ¿Qué recomendación me harÃan?
-
I recently bought a Pod 2.0. I went to check some info on it and noticed that it disappeared from Musician's Friend's multi-effects, and on several other websites (zzounds, AMS, Best Buy) it is marked as no longer being available. Did it get discontinued? If so, I must have gotten one of the last ones.
-
I'm having an issue getting the Metal Shop authorized for use. I had re-bought it because of new features, but I used to run POD Farm on a different computer. I deauthorized my other computer so I could use my Studio GX on the new Mac I had Purchased. I am running OS X and my computer is authorized but I'm afraid my Line 6 GX is not showing up in License manager as well... How do I solve this problem? I deauthorized it and registered it again but it still will not show up. Somebody please help. THANK YOU. -
Hey all, I usually only use my PODs for home recording but I've been considering using my HD300 live as a multi effects unit. I'm not interested in using the amp models live since I'm quite satisfied with and like the sound of my amp. If I'm not mistaken the HD300 has a "pedal board mode." I've also been wondering if this board would be capable of operating my amp's midi channel switching. It would basically be like using the pod like a GLab gsc only there would be no stomp boxes as the pod has all the effects. Anyone tried something like this?
-
Hey guys, i'm in serious need of some better sound. I want to get a 4x12 cabinet, i have been looking at something like the Line 6 412VS so i can finally use the stereo capabilities of my POD HD... Just wondering, can i plug it straight into the cabinet and have it work? Or will i need a Stereo Poweramp or something?
-
Hey guys, this is my first post in the forum. Right now I'm using a Gibson Les Paul with my HD500, using headphones. The sound is OK, but I'm looking to buy an amplifier. I'm considering buying a DT25 combo, but before I do, I have a couple questions. 1. Firstly, I have ran out of DSP a lot on my HD500, mainly because I use dual amp configurations. What I am wondering is if I can still use two amp paths with two different (pre) amps modelled on my HD500, and have the DT25 combo output both amps (both paths) in only one speaker (I will be using the combo amp). Another thing that I'd like to know in relation to this is whether or not using the HD500 in conjuncton with the DT25 will free up DSP. I heard that (since the 2.0 update), the DT25 models the pre amp instead of the HD500. Is this true? Will it model both of my pre amps, allowing DSP usage to drop on the HD500? 2. Secondly, I am wondering which cable to purhase to use with L6 link. I understand that Line 6 reccomend an AES/EBU type cable over everything else. However I also see that they recommend a Classic Series Microphone Cable by Planet Waves, which as far as I'm aware doesn't appear to be an AES/EBU type cable. I live in New Zealand, so I cannot purchase brands such as Mogami, in fact the only AES/EBU cable that is stocked in my local store is a HOSA AES/EBU cable. Would you reccoment this as a good cable? http://www.rockshop.co.nz/shop/recording/hosa-ebu003-aes-ebu-cable-3ft.html Also, I assume that 3ft is too short.... Thanks so much in advance, and any other tips in realtion to the DT25, such as upkeep and tone tricks will be greatly appreciated! I will be entirely new to valve amps. Nick.
-
Hi, I am trying to control the presets/expression pedals on POD HD 500 from my PC DAW. I just bought a USB to MIDI cable that works perfect with one of my MIDI keyboards. However, when I send a message (maybe a wrong message, but nevertheless) to 51 port of POD HD 500, which is supposed to be FS1, it definitely switches the FS1 on, but then hangs the POD completely so that it is not operational - no buttons work, nothing is responsive. Is that normal? Cheers, Sergey
-
Hey, Just bought a POD X3 Live from a friend, he said his POD worked with the Monkey program. I have tried just about everything, but windows 7 doesn't recognize the pod, and Line6 monkey/gearbox say its not plugged in. Do I have to put the device in usb mode or something, what am I doing wrong. I really don't want to have to get my money back from this guy, this device is pretty cool... Thanks, godbless. Device: POD X3 LIVE OS: WIN7 64 BIT CPU: I5 3570 (3.8GHZ) GPU: HD 7750 RAM: 8GB 1600MHZ HD: 500GB, 250GB, 160GB
-
Hello, I`m from Kyev.Ukraine. I have a guitar ESP eclipse II with active pickups and I use Pod XT Live as audio interface. The signal handle on the outlet is set to maximum but not clipped. During the recording a guitar rhythm doesn't cause any problems, but when I'm recording solo, outlet sound comes out very quietly, approximately -15 db. How to amplify the level of a sound? Previously I had Tone Port and used Pod Farm, which has a button "+18 db", I pressed the button and outlet sound became amplified (louder). Then I was recording solo and at the end I just turned off the button and kept recording in a usual mode. How can I amplify the outlet sound? The Pod Farm doesn't recognize XT Live, although the drivers are installed, why is that? And could Pod XT Live and Pod Farm be combined? I record through a real-time sequencer. And originally it's a clear signal recorded to make re-amping afterwards. Help,please -
Hello, I have a guitar ESP eclipse II with active pickups and I use Pod XT Live as audio interface. The signal handle on the outlet is set to maximum but not clipped. During the recording a guitar rhythm doesn't cause any problems, but when I'm recording solo, outlet sound comes out very quietly, approximately -15 db. How to amplify the level of a sound? Previously I had Tone Port and used Pod Farm, which has a button "+18 db", I pressed the button and outlet sound became amplified (louder). Then I was recording solo and at the end I just turned off the button and kept recording in a usual mode. How can I amplify the outlet sound? The Pod Farm doesn't recognize XT Live, although the drivers are installed, why is that? And could Pod XT Live and Pod Farm be combined? I record through a real-time sequencer. And originally it's a clear signal recorded to make re-amping afterwards.
-
my POD HD 400 does not work on PC appears as unknown, I installed all drivers and still the same, I restarted the pc and still the same, I do not know what to do, I'm desperate.
-
Just bought a pod hd pro and am trying to connect it to my 5150 head. Anyone know the best way to go about this by just using the power from the head and not the pre amp? Also what is the most convenient way to setup a footswitch with the pod hd pro (not the 500). Im not completely anal with tone or studio at the moment. So if getting the 500 is not too much a backstep would that be most convenient for live purposes?
-
Hey everyone, So I'm trying to use Cubase to automate patch changes within my POD 2.0 basically so that when I record the guitar effects will change according to what is programmed. I've already been able to get Line 6 Monkey and the Line 6 Editor to work with the POD 2.0 via midi. I've followed the tutorial posted here to the best of my ability substituting the POD 2.0 for the Axe-Fx and I've gotten down to the part with the In-Line Editor. http://stratamania.wordpress.com/ Would someone be able to tell me if this is the correct procedure and if the POD 2.0 can actually be automated by Cubase? Also the other problem I'm having is figuring out what the program numbers are and where I can find them. Would someone be able to tell me how to do that? Thanks in advance!!
