Search the Community

Q: Will PODxt or X3 tones work with the POD HD series? A: No. The POD HD tone architecture was built from the ground up and is different then our XT ands X3 series of PODs. Q: Will POD HD500X/500 tones work with the smaller 300 and 400 HD PODs? A: No. The POD HD500 routing capabilities make it far more flexible than the HD300 and HD400. Because of this, tones created in the HD500 will not translate over to the HD300 and HD400.

Q: Will the POD HD modelers work with the POD Farm standalone or plug in software? A: No. POD Farm is not compatible with any of our POD HD multi effect processor devices however, Line 6 has developed a proprietary editor librarian software called POD HD Edit that is a free download and will allow you to edit your tones on your computer. POD HD Edit is a free download and can be downloaded from our Software Downloads Page.

Q: How many amp models are included in the POD HD300? A: The POD HD devices come with 16, built from the ground up HD amp models. Q: How many effects are included with the POD HD modelers? A:The POD HD modelers sport 80, 90, and 100+ effect types respectively derived from the Line 6 M9/M13 effects processors. Click HERE for a complete list of effects models.

Q: I purchased model packs for my Line 6 device. If I upgrade to POD Farm 2 do I lose my model packs? A: As long as you purchase a Line 6 license key upgrade for POD Farm 2 then all of your previously purchased model packs will work within POD Farm 2. The only time this would not happen is if you purchased a "crossgrade" license key to POD Farm 2 iLok. Q: I purchased a Model Pack for my Line 6 audio interface and now I want to "crossgrade" to the iLok version of the plug in. Will I lose my model packs? A: If you "crossgrade" to the STANDARD POD Farm for iLok then yes. Model packs are not transferable from a Line 6 device over to an iLok key. However, you can purchase POD Farm 2 Platinum for iLok at a special "crossgrade" price. See the online store for details. Q: I purchased my POD Farm version 1 iLok key "Used/off of eBay" (basically NOT through the Line 6 Website Store or a Storefront/Dealer and had the key transferred to my account through Pace. Do I qualify for any upgrades or discount prices? A: No. Upgrades and discount pricing is only available to customers who purchased the POD Farm for iLok new from a dealer or through the Line 6 online store. Q: I purchased my Line 6 device used and there was a POD Farm version 1 license key tied to the device but not to my account. Do I qualify for any upgrade pricing or discounts on POD Farm 2? A: No. Upgrades and discount pricing is only available to customers who purchased the POD Farm Line 6 licenses new from the Line 6 online store. Q: Do I have to purchase a Line 6 license key to use POD Farm 2 as a standalone application for Tone Direct Monitoring? A: Yes. Unlike POD Farm version 1, which you can use in standalone mode for free without purchasing a key, you will need to purchase a Line 6 license key from our Online Store in order to use POD Farm 2 as a standalone application. Q: Will POD Farm 2 run in Standalone Mode with a iLok POD Farm 2 license key? A: No. The behavior is no different than that of POD Farm 1.x Plug-In effect with iLok licenses. It runs only as an AU/VST/RTAS Plug-In effect within a support host DAW application. Q: Will POD Farm 2 run in Standalone Mode with a PODxt or POD X3 (Bean, Live or Pro model) with a license installed in this device? A: No. The correct Standalone patch editing software for PODxt and POD X3 devices is GearBox (currently at version 3.72). Q: Will POD Farm 2 tones load into Gearbox to put on my POD xt/X3 hardware? A: No, POD Farm 2 tones will not load into the Gearbox software.

Below you can find the different POD Farm 2.0 upgrade scenarios based on when and how you purchased POD Farm version 1. For pricing details, please click on the link to the online store below. http://line6.com/store/ Please Note: 1.) Anyone who received POD Farm version 1 as part of the Line 6 September 2009 free giveaway does NOT qualify for any of the offers below. 2.) Anyone who was "comped" a POD Farm license key (iLok or Line 6) does NOT qualify for any of the offers below. 3.) POD Farm 2 is a paid upgrade for current POD Farm owners. POD Farm Stand Alone will not work unless you have purchased a license key. 4.) If eligible, run the Line 6 License Manager or log in to your Line 6 account and go to the Line 6 Online Store to redeem your special offer. 5.) The POD Farm (1/2) standalone software is not compatible with POD X3 series or iLok authorization. These devices are only used to authorize the POD Farm plug-in within a DAW with the appropriate license. -------------------------------------------------------- Line 6 License Key Upgrade Options: 1. If you purchased a POD Farm 1 Line 6 license BEFORE October 1st, 2009, you qualify for a discounted purchase price for POD Farm version 2 Line 6 license for 30 DAYS AFTER POD Farm 2 initial release. 2. If you purchased a Line 6 device with the POD Farm 1 plug in bundled with it (POD Studio, POD X3, UX8, DI) and enabled your POD Farm plug in with the Line 6 Monkey software BEFORE October 1st, 2009, you qualify for a discounted purchase price for POD Farm version 2 Line 6 license for 30 DAYS AFTER POD Farm 2 initial release. 3. If you purchased a Line 6 device with the POD Farm 1 plug in bundled with it (POD Studio, POD X3, UX8, DI) and enabled your POD Farm plug in AFTER October 1st, 2009, you qualify for a FREE upgrade to POD Farm version 2. 4. If you purchased a POD Farm 1 Line 6 license AFTER October 1st, 2009, you qualify for a FREE upgrade to POD Farm version 2. --------------------------------------------------------- iLok (purchased from Line6.com web store or via Authorized Dealer- independent seller transactions not eligible!): 1. If you purchased and activated a POD Farm version 1 STANDARD for iLok BEFORE October 1st, 2009, you qualify for a discounted upgrade price to POD Farm version 2 Standard for iLok for 30 DAYS AFTER POD Farm 2 initial release. 2. If you purchased and activated a POD Farm version 1 PLATINUM for iLok BEFORE October 1st, 2009, you qualify for a discounted upgrade price to POD Farm version 2 PLATINUM for iLok for 30 DAYS AFTER POD Farm 2 initial release. 3. If you purchased POD Farm version 1 STANDARD for iLok AFTER October 1st, 2009, you qualify for a FREE upgrade to POD Farm version 2 STANDARD for iLok. 4. If you purchased POD Farm version 1 PLATINUM for iLok AFTER October 1st, 2009, you qualify for a FREE upgrade to POD Farm version 2 PLATINUM for iLok. --------------------------------------------------------- Misc Upgrades: Q: I PURCHASED a POD Farm version 1 iLok key (Standard or Platinum) BEFORE POD Farm 2 was released but I didn't DEPOSIT it until AFTER POD Farm version 2 was released. Do I qualify for an upgrade? A: Yes. If you purchased an iLok key before the release of POD Farm version 2 but did not DEPOSIT it until after the version 2 release, you do qualify for a free upgrade to the same version of POD Farm 2. IE: Standard 1 will qualify to Standard 2 and Platinum 1 to Platinum 2. Q: What if I purchased a new POD Studio, POD X3, TonePort DI, or TonePort UX8 device after the release of POD Farm version 2? Do I qualify for a free upgrade to POD Farm version 2? A: Yes. When you connect your new device to Line 6 License Manager, the program will recognize the connection date and offer you a free upgrade to POD Farm version 2.5. The model set depends on what model set would have been offered to you with the included POD Farm 1 version. IE: UX1 and UX2 get standard version upgrade but UX8 and POD X3 devices get platinum version upgrades. Go to http://line6.com/store/, choose your device in the POD Farm 2 area and you will see a POD Farm 2 license at $0.00. Click Get Free Item, then use the Line 6 License Manager to authorize your hardware.

Many new users have contacted us with questions regarding the usage of Line 6 POD Studio USB audio interfaces in conjunction with AVID's ProTools recording software. Here are a few important things to be aware of: ProTools version 8.05 or earlier requires that the user runs a proprietary DigiDesign,AVID or M-Audio audio interface device with this software. POD Studio devices cannot be connected to Pro Tools via USB and used as the main audio Input/Output device. Basically, the AVID-approved hardware device has proprietary security/licensing scheme embedded inside to allow the user to run the Pro Tools application. If the device isn't present, the program will not launch. Pro Tools 9.0 or later can interface directly with Line 6 interfaces. This version supports ASIO,Core Audio and third party audio interfaces. If you are currently running Version 8 and would like to use your POD, POD Studio or TonePort with Pro Tools, you will have to upgrade. Line 6 License Manager can authorize your Line 6 licenses to your computer, allowing you to use your Line 6 Software in any Pro Tools version without the need for a Line 6 interface. For more information, please refer to page 1.5 of the Line 6 License Manager User Guide. For more information about ProTools, you can visit AVID's website. Of course, you can use the Line 6 POD Studio USB interfaces with any recording applications that do not require a proprietary hardware device. Among these programs would be: SONAR, Cubase, Digital Performer, Live, Logic, GarageBand, Reaper just to name a few.

Here are the measurements for using screws to attach the POD Mount. These are sized for the next-length size appropriate screw and using the rubber feet as well for cushion bumpers. The actual well depth in the metal POD shells across all models is .40" or 10.2mm. If theyou wish not to use the bumpers, you should use either washers or nylon standoffs on the following mounting screws to make up the space difference. A round-down size screw would be too much to use and the threads may not bite into the cast metal shell correctly. POD/ POD 2.0/ Bass POD 6/32 machine 1.0" or 25mm 1.25" or 32mm POD XT/ Bass POD XT 6/32 machine 0.75" or 19mm 1.00" or 25mm FBV POD POD 2.0 6/32 machine 1.0" or 25mm 1.25" or 32mm

Terms Before we begin here are some terms to know POD Farm Application is a tone modeling application for all non-POD Line 6 USB recording devices . The application processing the audio from your device on the way to your recording software. Gearbox is the old version of POD Farm. Gearbox operates as a standalone application, standalone editor for POD XT/X3 devices, plugin, and GuitarPort Online client. Amp Farm is the first Line 6 modeling software. It is only available for Protools systems. It has been discontinued by AVID and will not be supported on Pro Tools 11 or higher. Toneport is the old product family name for Line 6's USB recording devices such as Toneport GX, Toneport UX1, Toneport UX2, Toneport UX8, Toneport KB37. POD Studio is the newer version of Line 6's USB recording devices and POD Farm software. This package contains POD Farm software and a USB recording device. Monkey application is a updater app that downloads your hardwares drivers and software for you. It can be downloaded at www.Line6.com/software License Keys are authorizations that live on your Line 6 hardware. You hardware acts as a dongle. Gearbox, POD Farm and all model packs require authorizations to run. Your authorized device must be connected to your system in order to use said items. Model Packs are authorizations that give you access to more models within Gearbox and POD Farm and POD family products. iLok is an industry standard software protection device. Also known as a dongle. Licenses are stored on this USB dongle which must be connected upon software execution. https://www.ilok.com/ Monkey (the application, not the hairy ape) Monkey is an updater application for Line6 software and devices. install Line 6 device drivers from Line6.com/software (optional) connect your Line 6 device to your computer download and install monkey from Line6.com/software run monkey app create a new user account or login to an existing account this login is the same as the Line6.com account [*]Activate Features the first time you connect your brand new hardware to a computer, you will be asked to "activate Add-Ons". This enables all of the factory default authorizations on your unit. [*]Authorize each time you connect your hardware to a different computer, the Line6 server must verify your hardware's authorizations with the server via the Monkey. [*]Optional Add-Ons tab shows which software, model packs, etc are authorized for your hardware [*]Updates tab this tab shows the latest software downloads for the given user group you are currently login in under Model Packs Model packs are Line 6 authorizations that add more models to your Gearbox software, POD Farm software, or POD family device. POD Farm Plugin requires Add-On auth to run (Included in POD Studio Devices on the hardware) Model Packs require an Add-On auth to run Software / Hardware Support Optional Add-On "authorizations" can reside on any Line 6 USB recording device such as... GuitarPort Toneport DI-Silver Toneport DI-Gold Toneport GX Toneport UX1 Toneport UX2 Toneport UX8 Toneport KB37 POD Studio UX1 POD Studio UX2 POD Studio GX POD Studio KB37 POD XT (Bean, Live, Pro) POD X3 (Bean, Live, Pro) Gearbox Standalone App runs on... GuitarPort Toneport DI-Silver Toneport DI-Gold Toneport GX Toneport UX1 Toneport UX2 Toneport UX8 Toneport KB37 POD Studio GX POD Studio UX1 POD Studio UX2 POD Studio KB37 Gearbox runs as a hardware editor for... POD XT (Bean, Live, Pro) POD X3 (Bean, Live, Pro) Installers Typically Line 6 application installers like Gearbox and POD Farm come with the following. Line 6 monkey app Main App Toneport, POD Studio, and POD family device drivers Keep in mind, drivers may be updated after a installer is made available. Use monkey to keep your software versions up to date. iLok POD Farm supports iLok software protection. POD Farm for iLok will be available in two versions, a Standard and Platinum version If you have POD Farm Platinum you will be able to run all possible models

GearBox 3.72 is the most current version of our amp/effects modelling software editor for compatible USB hardware devices. Download the bundled installation file from our Downloads page at: http://line6.com/software/ From the "Software" drop-down list, select GearBox. Click on the red "GO" button to the right. On the following page, the most current version of our bundled installer should be at the top of the list. Version 3.72 is the most current as of this document. Click "Get Download", then accept the licensing agreement. Choose: "Save" to begin transferring the bundled installation file to your local hard drive. Once this file has been completely saved, find it on your hard drive. Make sure your USB hardware device is NOT connected yet. Double click the GearBox installer file to begin installation of bundled components (USB Device Drivers, Line 6 Monkey*, GearBox Editor and optional Plug-In files). Please read through the manual by selecting the "F1" key when gearbox is open. You can also save the PDF file on your computer for later viewing ot dowmload it at the following link: Gearbox 3.72 manual Line 6 Monkey is a USB device firmware/flash memory utility application only. It will enable you to update the firmware and flash memory (if available on your device). For certain devices (PODxt/X3), it can also archive patch bundles and restore saved patch bundles. GearBox is the current Amp/Effect modelling software editor application for the following USB Audio Interface devices: GuitarPort, TonePort, POD Studio, PODxt and POD X3 series devices. With it, you can do the following two primary functions: Open up saved (and downloaded) .l6t patches from your hard drive for editing. Afterwards, you can re-save the modified patch file back to your hard drive or sync/transfer the patch to your USB hardware device connected. ***NOTE: POD Farm 2 tone files will NOT load into the Gearbox software. The top-half of GearBox is where you can select Stomp, Amp Model, EQ, Modulation, Delay, Reverb parameters and adjust them via mouse-click/drags to affect the input signal on your connected USB hardware device in real-time.

1. Input settings on User Bank 13 (A, B, C, D) are set incorrectly. Tone 1 is set to GTR 1 + Variax and Tone 2 is set to Mic 1. Because the XLR and 1/4" inputs on the X3 Pro on the same channel cannot be used at the same time, this will not work. The work around here is to re-save each patch in Bank 13 with the input setting on Tone 2 set to Mic 2. 2. Audio from the Tuner does not mute when connected digitally to audio interface. When using the tuner on the POD X3 Pro, the audio from the tuner does not mute on the S/PDIF and AES/EBU digital outputs even with Mute selected in the Tuner menu screen. 3. Tuner does not work with Guitar 2 Input. The tuner will only tune instruments that are plugged into the Guitar 1 and Variax inputs on the POD X3 Pro.

Before we get into defining "Platinum", it's important to know that POD Farm comes in two distinct flavors: 1. As a plug in tied to a Line 6 device OR 2. As a plug in tied to an iLok key The difference between POD Farm and POD Farm Platinum, regardless of which type of device the license is tied to, is simply the number of amp, cab, and FX models available in the plug-in. POD Farm includes a limited number of models PLUS any models your Line 6 device contains from buying model packs, while POD Farm Platinum includes ALL Line6 models ever made to date. You may be asking "What does this mean"? Let's look at some examples: If you have a POD XTL and you own all of the Line 6 model packs (Power Pack, Metal Shop, FX Junkie, Collector Classics, and the Bass Expansion Pack), then you will have an equivalent model set to what's included in POD Farm Platinum. If you have a POD XTL loaded with only the Collectors Classic pack and you upgrade to POD Farm plug in, you will not have an equivalent model set to POD Farm Platinum, but the models from the Collector Classic Pack will be available in POD Farm. If you have an POD X3 and you installed your free POD Farm plug in then you will have an equivalent model set to what's included in POD Farm Platinum. Why? Because the X3 devices come loaded with all of our models out of the box. The same goes for anyone who owns a TonePort DI Gold version. Now, it's important to remember that the iLok version of POD Farm will come in two versions: 1. POD Farm for iLok (a limited amount of models included) OR 2. POD Farm Platinum for iLok (all models included) Some questions about POD Farm plug-in for iLok: Q: Can I transfer my POD Farm key out of my Line 6 device into an iLok? A: Currently there is no way to transfer a POD Farm license from a Line 6 device to an iLok key. Q: Can I upgrade my standard version of POD Farm for iLok to the Platinum version? A: See the following link for the upgrade path: http://line6.com/store/podfarm/ilok Q: Do I get a 30-day refund option for the iLok version of the software (as seen with the Line 6 licenses)? A: No, as iLok is a separate company there is no way to get a refund once the license has been purchased. We reccomend using the trial version of the POD Farm prior to purchasing to ensure you are interested in POD Farm.

Q: How do I get the POD Farm Plug-in? A: POD Farm is now a factory-enabled feature available free for POD X3, POD X3 Live, POD X3 Pro, TonePort DI, TonePort UX8, and all of the POD Studio computer interfaces. Use the Line 6 License Manager software to authorize your hardware with the POD Farm license. If you purchased the GearBox plug-in as an Add-on from the Line 6 Online Store, then you may obtain POD Farm plug-in functionality at no charge (additional models not included) by running the Line 6 License Manager program, then, authorizing the your licenses on your hardware. Q: I purchased the Gearbox plug-in. Am I entitled to a free upgrade to POD Farm? A: Yes. POD Farm is available as a free download to everyone who owns the GearBox Plug-In including TonePort DI owners. POD Farm Plug-In will also be available for free to POD X3, POD X3 Live and POD X3 Pro owners. Q: I received a free POD Farm plug in because I am an X3 owner. Is it possible for me to transfer the POD Farm plug in to another device? A: No, the free upgrade to POD Farm for X3 owners is a factory bit that is bound to the X3 and cannot be transfered out. Q: I received the Gearbox Plug-In as part of a promotion (Annual GPO Subscription Service). Am I entitled to a POD Farm Plug-in as well? A: No, the free POD Farm upgrade does not apply to free Gearbox Plug-In promotional events (such as GuitarPort Online). For more information, please see the link below: http://www.line6.com/podfarm/faq.html POD Farm 2 Info Below you can find the different POD Farm 2.0 upgrade scenarios based on when and how you purchased POD Farm version 1. As we now offer the POD Farm 2.5 software, we no longer have pricing for POD Farm 2 available. Please visit the Line 6 store for further information on POD Farm 2.5 pricing. http://line6.com/store/ Please Note: 1.) Anyone who received POD Farm version 1 as part of the Line 6 September 2009 free giveaway does NOT qualify for any of the offers below. 2.) Anyone who was "comped" a POD Farm license key (iLok or Line 6) does NOT qualify for any of the offers below. 3.) POD Farm 2 was a paid upgrade for current POD Farm owners. POD Farm 2 Stand Alone will not work unless you have purchased a license key. 4.) If eligible, log in to your Line 6 account and go to the Line 6 Online Store to redeem your special offer. Use Line 6 License Manager to authorize the assets to your hardware. 5.) The POD Farm (1/2) standalone software is not compatible with PODxt/POD X3 series or iLok authorization. These devices are only used to authorize the POD Farm plug-in within a DAW with the appropriate license. -------------------------------------------------------- Line 6 License Key Upgrade Options: 1. If you purchased a POD Farm 1 Line 6 license BEFORE October 1st, 2009 you qualify for a discounted purchase price for POD Farm version 2 Line 6 license for 30 DAYS AFTER POD Farm 2 initial release. 2. If you purchased a Line 6 device with the POD Farm 1 plug in bundled with it (POD Studio, POD X3, UX8, DI) and enabled your POD Farm plug in with the Line 6 Monkey software BEFORE October 1st, 2009, you qualify for a discounted purchase price for POD Farm version 2 Line 6 license for 30 DAYS AFTER POD Farm 2 initial release. 3. If you purchased a Line 6 device with the POD Farm 1 plug in bundled with it (POD Studio, POD X3, UX8, DI) and enabled your POD Farm plug in with the Line 6 Monkey software AFTER October 1st, 2009, you qualify for a FREE upgrade to POD Farm version 2. 4. If you purchased a POD Farm 1 Line 6 license key AFTER October 1st, 2009, you qualify for a FREE upgrade to POD Farm version 2. --------------------------------------------------------- Crossgrade Options from Line 6 License Key to iLok: 1. If you purchased a POD Farm 1 Line 6 license key (this excludes factory bits tied to POD Studio and POD X3 devices) a special "Crossgrade" price will be made available to you. -------------------------------------------------------- iLok (purchased from Line6.com Webstore or via Authorized Dealer- independent seller transactions not eligible!): 1. If you purchased and activated a POD Farm version 1 STANDARD iLok key BEFORE October 1st, 2009, you qualify for a discounted upgrade price to POD Farm version 2 Platinum for iLok. 2. If you purchased and activated a POD Farm version 1 PLATINUM iLok key BEFORE October 1st, 2009, you qualify for a discounted upgrade price to POD Farm version 2 PLATINUM for iLok. 3. If you purchased POD Farm version 1 STANDARD for iLok AFTER October 1st, 2009, you qualify for a FREE upgrade to POD Farm version 2STANDARD. 4. If you purchased POD Farm version 1 PLATINUM for iLok AFTER October 1st, 2009, you qualify for a FREE upgrade to POD Farm version 2PLATINUM for iLok. --------------------------------------------------------- Misc Upgrades: Q: I PURCHASED a POD Farm version 1 iLok key (Standard or Platinum) BEFORE POD Farm 2 was released but I didn't DEPOSIT it until AFTER POD Farm version 2 was released. Do I qualify for an upgrade? A: Yes. If you purchased an iLok key before the release of POD Farm version 2 but did not DEPOSIT it until after the version 2 release, you do qualify for a free upgrade to the same version of POD Farm 2. IE: Standard 1 will qualify to Standard 2 and Platinum 1 to Platinum 2. Q: What if I purchased a POD Studio, POD X3 or TonePort DI, or TonePort UX8 device after the release of POD Farm version 2? Do I qualify for a free upgrade to POD Farm version 2? A: Yes. When you connect your new device to Line 6 License Manager, the program will recognize the connection date and offer you a free upgrade to POD Farm version 2.5. The model set depends on what model set would have been offered to you with the included POD Farm 1 version. IE: UX1 and UX2 get standard version upgrade but UX8 and POD X3 devices get platinum version upgrades. Go to http://line6.com/store/, choose your device in the POD Farm 2 area and you will see a POD Farm 2 license at $0.00. Click Get Free Item, then use the Line 6 License Manager to Authorize your hardware.

Pocket POD Express Pocket POD Express Pilot's Guide: see attachments below. Pocket POD Express ADVANCED Guide: see attachments below. Q: What is the warranty on my Pocket POD? A: The Warranty on the Pocket POD is 90 days from the date of purchase on the receipt. Q: Can I purchase model packs for my Pocket POD Express? A: No, Line 6 model packs are only available for our POD® XT, TonePort and GuitarPort family devices. Q: Is there a software like Vyzex that I can edit the Pocket POD with? A: No, The Pocket Pod Express will not be editable by software means. Advanced Guide.pdf Pilot Guide.pdf

Q: How to resolve a blank screen on a PODxt LIVE A: If you are getting a blank screen on your PODxt LIVE please try the Edit Buffer Initialization with the following steps: 1. Turn off the POD 2. Turn on the POD while holding down the Save and Edit buttons simultaneously 3. The POD's LCD screen should display Init Edit Buffer 4. Push the Output mode button 5. Turn the Select / Select Page knob one click to the right 6. Turn the Effect Tweak / Change Value knob to the left or right adjusting the contrast. If this does not solve the issue for you please locate your local Service Center for repair. Q: I purchased a MODEL PACK and can't find any of the new features on my device. A: Please run Line 6 License Manager and authorize your purchased MODEL PACK/s for use with your Line 6 Devices and Software. 1. Download and install the latest version of Line 6 License Manager for your operating system from the Line 6 software page. Go to the following link for software downloads: Line 6 Software downloads. 2. Before launching the Line 6 License Manager, be sure to have your Internet connection active (and your Line 6 device connected, if you are using one). 3. Launch the License Manager: On Mac® - Go to /Applications/Line 6/Line 6 License Manager. On Windows® - Go to Start menu\Programs\Line 6\Tools\Line 6 License Manager. 4. Log in to your Line 6 account. 5. Select the device to which you want to authorize for use with your licenses and click the Authorize button. 6. Once the Authorization process completes, you may be prompted with a screen informing you that your Line 6 device includes some Add-Ons that need to be “Installed” on your device. If you are presented with this screen, click the Install button to proceed. 7. At this point, you are able to use your licenses on your authorized device. Repeat this process with any other devices you want to authorize for use with your licenses. Note: The installation of your model pack will not add presets to your device/program, it will add more AMP or EFFECTS models. Q: I am trying to set up my POD XT Live and on the what are you connecting to screen I cannot get it out of Studio/Direct mode. A:When headphones are plugged in, the POD XT Live defaults to Studio/Direct mode. Please unplug the headphones and it should give you the other connection options. Q: How do I calibrate the pedal on my PODxt Live? A: 1. Make sure there is nothing connected to your PODxt live aside from the power cable. 2. Power up the PODxt Live while holding down the Bank Up pedal 3. Press the Amp pedal (this will reset the current settings) 4. Move the pedal all the way to the heel back position, then all the way forward until the toe switch clicks. You will want to stand up and shift all of your weight to the toe position until you see the WAH light turn on. 5. Wait 10 seconds, then power the PODxt Live off and back on again. 6. Your pedal is now calibrated. Q: What type of pedal should I use for the external expression pedal? A: The Line 6 EX-1 is the pedal recommended for use with all Line 6 gear. You should be able to use any expression pedal with a 10K potentiometer if you do not have an EX-1 available. Q: Can I calibrate the external expression pedal? A: There is no calibration method for the external expression pedal. PODxt Family Error Codes If you are experiencing the following error codes in the display of your PODxt device: Invalid Error Code 01 Invalid Error Code 02 Invalid Error Code 03 Invalid Error Code 04 Invalid Error Code 05 Invalid Error Code 06 please try the following: Try the Edit Buffer Initialization with the following steps: 1. Turn off the POD 2. Turn on the POD while holding down the Save and Edit buttons simultaneously 3. The POD's LCD screen should display Init Edit Buffer 4. Push the Output mode button 5. Turn the Select / Select Page knob one click to the right 6. Turn the Effect Tweak / Change Value knob to the left or right adjusting the contrast. If that does not help, please try re-installing the flash memory on the PODxt device using the instructions in the following link: Pod xt Series: Factory Reset, Reflash, and Firmware Updates If this does not solve the issue for you please locate your local Service Center for repair.