Search the Community
Showing results for tags 'pod'.
-
I downloaded the software to my surface but it won't launch. I troubleshooted everything on my surface, all settings are correct, but still won't open the app. It says side by side configuation is incorrect. Curious thing is when I first installed the program, it worked.
-
Hi everyone Here is the idea that I have: I have Korg ESX sampler and I want to control it via MIDI on POD 500. I want to assign one footswitch of the POD so that it would Start/Stop the playback of the ESX when I need it. The problem is that I can't figure out the POD MIDI settings for the Play button on the ESX. I was able to control some parameters on the ESX via POD 500, but couldn't find out which settings I need for Play (Start/Stop) button Can somebody please help me with this? Thanks in advance
-
Hello people!, i need your help about this. I connect my piano into the input of the pod xt pro, and use some fx's of it and then i connect the headphones to hear it mixed, AND at the same time i want to connect the pure signal of my piano from the Unprocessed Guitar Out of the pod directly to a selfpowered monitor cab that i have, but there is no audio at all... what i'm doing wrong?. i thought that connected that way i could ear my piano just Dry without effects into the cab. Do i need something else between the unprocessed guitar out of the pod and the input of my selfpowered monitor cab?... I would appreciate any help about this since i want to hear the Dry signal from one Out and the Mix signal with all the effects thru the normal output of my pod or the headphones out like i use to do it. PS: I use normal 1/4 guitar mono cable to make all the connections from ins and outs Thank you! -
Been searching for anyone who has used the FBV3 in daylight, and how they are using it so they can see the led display. Works great inside, or at night but use this thing is daylight, and forget about it. You cant see anything. Its worthless during daylight hours. Anyone have any solutions or suggestions to this issue? ANY suggestions are appreciated, as I cannot find anyone that has yet to mention how they are using it during daylight hours. Please help if you can. Thanks
-
I have a problem with the POD HD 500X. I'm normally playing at home then I want to change from the EXP1 to EXP2 to use the Wah effect, but the POD shuts down and it begins to restart over and over again without starting. Waht could it possibly be? FX overuse? Wrong calibration?
-
Anyone tried to edit the sounds on their POD 2.0 using Windows 10? I've tried to download Sound Diver and Line 6 Edit but neither seem to be available for Windows 10 as far as I can find. Anyone come across this issue, or found a way to hack it? Cheers -
Hello everyone I recently had to reinstall completely all my OS from scratch and nothing survived. No backups. all from zero. Unfortunately the UX1 drivers previously kept on a folder in the old hard drive won't open now, and Monkey line 6 seems unable to reinstall my software. Is there any way to recover my software for the UX1/
-
Hello people, i just wonder if the Input of the POD XT PRO rack is a balanced or a unbalanced input, i'm asking this because i have an electric grand piano wich has outputs like a guitar does (1/4 plug) and besides XLR outputs too, but i always use the 1/4 plug output with a normal guitar cable (wich is TS ) to connect it to the front input of the POD XT PRO but i can hear the Radio Station when i do, and i was wondering if instead i can use a 1/4 TRS cable in both ends wich goes from the output of my piano to the front input of the POD, or maybe a XLR from the output of the piano to the input of the POD using a TRS male on this end. Thank you!
-
Hey guys, I've read all the posts about POD UX2 in this forum, but nothing seems to help :( Please help me out ;( About two months ago my POD UX2 did not have any problem with its sound or signal. Now that I have spare time, I connect the device again, but no sound & no meter movement :( - I use POD Farm and Window 10 with my device - The issue is not about my guitar--no active pickups, guitar knobs at full, working perfectly last week - The output level and volume on Pod Farm are also not the problem - The unit lit up, but showed no meter change whenever I played something on the guitar - The screen (on Pod Farm) also shows no meter change as well - I can hear other audio sounds (i.e. youtube) through the device, though - The mixer input was on instruments, so no problem with the mixer - Unfortunately I have no access to other amps, so I cannot tell if the problem lies on the guitar cable... hopefully if that's the case I would simply be able to change it out. But is there any other possible issue that I might be overlooking? Please help! :( :( :( -
I am looking to use POD Farm to help clean up a simple USB headset mic. Some day I will get a good mic and interface but for now I just need to do some narration of a PPT presentation and would like the sound to be better. Any ideas?
-
Hi, I have an issue on my great POD HD500 with foot switch FS3. Specifically, I found it broken with spring out of slot. I am unable to find any way to mount it properly. If I click on the button underneath it works, so it's not electronic, just the switch to be mounted correctly. I am attaching some pics, can anybody help me? I hope this is not irremediably broken and need a replacement. Thx!
-
I have been using a Pod X3 Live for about 4 years. It was bought 2nd hand so its well out of date now, and parts cannot be easily obtained in the UK. Last year the power supply went down totally and my techie boffin pal rigged up a workaround, because the parts to reinstate it were not available. He did warn me that it may not be economic to repair again and would probably blow again. Anyway it suddenly stopped dead and went blank a week ago, admittedly after I had been perhaps over-enthusiastically wa-wa-ing, (which might be a clue?). I smelled burning so something shorted out. My boffin pal had a look and tells me its all powering up OK, and there is no obvious burned out part visible, but there is no audio output at all! Its probably bound for the scrap heap to be replaced by a second hand HD500X off ebay, but I'm wondering if anyone knows if there might be a simple fix for this? My immediate thought is either that the sound output power supply (on the board?) has blown, or its something to do with the expression pedal failing. A second question is whether I will be able to load in my setups via Gearbox into the HD500X? I think so, but nobody I have asked knows for sure. It would be so great not to have to reinvent the wheel!
-
My original POD has been in store for years due to my travelling Above the socket for the floorboard there is no writing. If I press MANUAL when turning on the POD is says POD 2.0 so I must have put in a new EPROM - inside it has a label "2.3" But I now realise I have made it not compatible with my floorboard :( 1) What pedal board will work with this original POD that has 2.3 EPROM upgrade? 2) Are there any original EPROMs anywhere? Thanks
-
Hi, I've been successful in changing patches on my Pod HD500 using Cubase LE AI Elements 8, but the Pod just doesn't toggle the effects on/off when a midi command is sent to it. The Pod is sending and receiving signal as I have even recorded effect toggles from it to a MIDI track, but the Pod only responds to the patch changes, not the effects toggling. I'm not sure if I need to change any settings in the Generic Remote Settings. Can anyone help please? :)
-
I have a PODhd500x. My expression pedal doesn't function. I have rested global settings. I have updated firmware and flash memory. I have calibrated the pedal and pedal calibration says 'F'. What could be wrong and someone please tell how to fix it? I live in a place where there are no service centres close by. Any help would be appreciated. Thank you.
-
My Pod xt live has a blank, orange screen when I turn the unit on. Digital screen showing banks and channels doesn't light up. No sound at all going through. I've connected it to Line 6 Monkey 1.77v via USB and it is recognized and even the ESN is recognized, but no Flash Memory is recognized. The USB Firmware is fine, but no Flash Memory located, just a dash, and a question mark before the Flash Memory. I tried pressing "Save" and "Edit" together while powering up, but that didn't work. No buttons or lights work anywhere. No knobs work, nothing at all. Can anyone please tell me how to fix this unit or does it need to be sent for repair. Thank you all for your time. -
Hello, I used to own a Pod XT a few years back. There was a heavy FX tone that I used on a song that I’d love to be able to download again. It was called Broken Wash. Could anybody point me to an archive with this tone? Thanks.
-
Hello, I purchased the Line6 POD UX2 via http://www.thomann.de on 3/30/18. It was described with "including Line6 Software POD Farm with "FX Junkie" model pack, 18 Amps, 64 effects, [...]". So i registered my UX2, downloaded PodFarm 2.5, which came with a CD and Line6 Monkey. But when I start PodFarm it says "no PodFarm 2 License found". So i only got a Trial Version of the Software, which only includes 3 Amps, 2 Preamps, ... how can i get the full Version, which was described on the Website i bought the UX2? I don't want to buy it seperately, when it should be included with the UX2 device. I also tried to uninstall PodFarm and download the latest Version via your Website. Thanks for your help.
-
Hi Guys and gals! I have a question about the placement of the Vintage preamp. Im running a split path Top for acoustic and bottom for mic. Originally I had the vintage pre at the start of each path but it sounded negligible and average at best. Then I shifted the vintage pre to first spot then split the paths. Wowzer it sounded amazing!! Buuuuttt I then effectively have 1 path I think as all effects (eq and boost) afterwards effect both guitar and mic even tho it's split. Why does the preamp sound so much better like this? Do I need to start with the mixer and pan guitar left, mic right (i run mono out anyway) then split paths, then have the preamps? Maybe pramp, then panned mixer, then split? Help haha! Thanks.
-
I have a Lowdown 150 (and a 110 as well) with presets for my different basses, active and passive. But I don't always feel like lugging 50 lbs to a gig when I can DO to a PA. Which POD would duplicate my 150 presets? Thx
-
Hi, I just recently bought the POD HD500X and was wondering can the POD achieve tones like titanium, Don't let me down by Chainsmokers and also the new upcoming songs. The reason i asked this is because i am a beginner guitarists and am just learning by myself. It would be great if someone could help me out. Another question is that i try to get through the CUSTOMTONE patches for beat it solo for my POD HD500X but i can't get it cause no one has done the patches for the song for the POD HD 500X and i do not really know what effects are being used for that song. So was wondering can the pod achieve the tone as well.
-
So for the last couple hours I have been setting up my new AT2035 with my new Line 6 UX2, but so far I have installed everything I need to install, I have the XLR cable in the right spot and the USB connected in the back. But no sound comes through, almost like the mic isnt even on. AND YES I have tried switching from "instrument" to "mic 1 or 2" still nothing. I am running out of ideas at this point.. PLEASE HELP! UPDATE! I have gotten PODFarm to actually pick up my sound, BUT NOW whenever I talk into my mic it is just straight static and nothing else. -
I have been using my Pod to record in Reaper, but I realized that until now I had been using WASAPI drivers instead of ASIO. My setup is as follows: Guitar into the Guitar In on the Pod, USB on the Pod into the USB on my computer, and headphones into the audio jack of my computer. I am essentially using the Pod as a DI box and reamping with VSTs in Reaper, as such, I don't want the sound of the Pod monitored, but the processed Reaper signal. When I attempt to use the Line 6 ASIO drivers, I cannot figure out how to send the output to my headphones. I have tried ASIO4All as well, and it shows the Pod as unavailable. Is there anything I can do with this setup, or would I need an additional piece of equipment in order to achieve this? Thanks in advance! -
Hello, my pod hd500x motherboard crashed and i’ll buy the hx effect, but can someone give me the complete preset of the « vocal synth » by pics, it would be easier i think? thx a lot
-
Hola quiero registrar mi pedalera pod xt live pero no tengo el numero de serie cuando me lo vendieron ya le habian quitado el stiker alguien sabe que puedo hacer para poder bajar presets del custom tone? ya que si no registro mi pedalera no me deja saludos
