Search the Community
Showing results for tags 'presets'.
-
Before I start - I've already updated the firmware on my Stomp (3.50), and HX Edit is on the latest version (3.51). I've also restored the factory settings on the device itself by holding down the two right pedals and turning on the unit. Additionally, I've uninstalled and reinstalled HX Edit. Nothing has worked so far. My computer is running the latest version of macOS Ventura 13.2.1. My issue is - anytime I try to import a new preset into HX Edit and subsequently onto HX Stomp, HX Edit crashes entirely and I have to relaunch. I've tried dragging and dropping presets onto a New Preset slot, selecting a New Preset slot and clicking Import, and File -> Import Preset - all to the same effect. I've attached three screenshots of the issue, so hopefully that helps. The preset I attempt to import in the video is from Alex Strabala's Matchless HX Stomp series. It is clearly marked as an HX Stomp preset. Hoping someone else has experienced this and resolved it. Super frustrating, as part of the reason I purchased the Stomp was to load custom presets from creators. If I can't figure this out, I'm not sure why I'd use the unit. Help would be greatly appreciated. Thanks!
-
I have two problems folks: 1. Has anyone else had a problem with making the Auto Volume model work properly on the second bank of presets? 2. Is anyone aware of a way to achieve spillover between presets? -
My Pod HD500X recently packed up (le cry) and I had the Bass Amp Pack downloaded on it which I purchased about a year ago. I bought a NEW HD500X for teaching and because it's familiar - but I can't find a way to redownload my previous bass settings with the pack. Is this possible to transfer packs over from one HD500X to another? -
Yo stompers! I'm using the stomp XL in a show so I've got loads of snapshots to play through. I've currently got it set up so that I cycle through the 4 snapshots then move onto a new preset with 4 more snapshots (repeat ad nauseam). The issue I have is that when I switch to the next preset, snapshot 1 isn't auto selected. Sometimes it's on 2, sometimes 3, sometimes 4(!). How do I set it to default to snapshot 1 when moving to a new preset? Thanks.
-
Hi, I use an hx stomp in snapshot mode with a dissster area designs micro midi switch to scroll up and down through the preset list. This works great. However due to a fat feet issue I inherited from my grand mother I occasionally, in the heat of the moment, find myself stepping on two foot switches at once and instead of switching to a searing solo snapshot that wows my legion of fans, I end up in scroll mode and have to smile and hope my facial expressions convey the epic tone I was meant to switch to. Is there any way to disable this dual foot switch ‘preset list scrolling’ feature on the stomp?
-
HI! I have a faves of chase bliss audio Do you think I can do something with the HX effects via MIDI? I think it could be interesting
-
I was wondering if anyone was aware of a site or forum that might have other's takes on how to set your presets to sound like "insert player/band/song here". For example, a simple one might be Kurt Cobain's tone for "Come As You Are". I play in a cover band that does a pretty wide range of tunes and it would make life a little faster if there was a good reference/starting point out there!
-
I have a Pod Go, but i'm confused about the extra momentary switches you can connect. Is it possible to assign two more presets to the momentary switches when in preset mode, without switching banks?
-
hi. im a beatbox artist. so i using helix. and i doin jammin with loops. and sharing stuffs with other artists.. yeah! but i import wrong bundles. and i turn off my HX EDIT before done to import . cause i feels like "oh sh..!" and i reboot my helix. and its everything gone. i didn't back ups.. but i need to using that presets..!! any advices??!???? i need help. thanks :) -
Short introduction. Hi, we're Becksteetsj (.wordpress.com). Were an amateur band producing different types of music with a consistance of four bandmembers playing in varying compositions and sometimes with guest musicians. Our goal is to have fun en joy! Started with Line 6 with a spider II 15w. Great amp, but speaker to weak for me. Learned it. Loved it. Eventually sold it, to ... Eventually upgraded to a spider III 30w. Great amp. Learned it. Love it. Double-graded with a spider IV 30w next to my III. Even greater. Love this one to. Still slightly learning, and therefore my question. Both used for playing. The III in my livingroom for jamming. And the IV in my studio, both used to record with speaker (mic-ed) or directly plugged in. But i still have a question about the storaging pre-sets on this IV. There are four knobs. On my II & III i could store 4 pre-sets over 4 amp-models. Keep pushed till it is set, simple. But this IV reacts different, after blinking (as on II&III) i then a/b/c/d start blinking together and i can select 1 of 4 (this is new to me). Looks to me that i can store 4 pre-sets for each amp-model? Am i thinking right? 4 pre-sets on 6 amp-models = 24 pre-sets? Or do i still have 4 pre-sets over all 6 amp-models? Or 4 times 4 = 16?? Thank you in advance for your help.
-
Hello everyone, I own a Pod Go and have been looking for presets to purchase and tweak to my liking. I've purchased many different presets, and really like them but I've also noticed that there are not many people selling presets for the Pod Go. Usually they are recreations of one of their Helix/HX patches adapted for the Pod Go. Lately, I've been watching YouTube videos of Helix and HX Stomp users making presets and giving their tips etc. On to my question... The Pod Go Edit software does NOT have the ability to open Helix/HX Stomp preset files, only Pod Go Edit files. Being that I don't have a Helix or HX Stomp is there a way I could purchase Helix/HX presets and view the amp/cab and other pedal settings? This way I can recreate them on the Pod Go. I'm not looking for freebies, but I just need to see the numbers to recreate them on my Pod Go. Is there software that might allow me to view the preset settings of the Helix/HX Stomp files? Thanks in advance for help with an odd request!
-
Hello Helix Community, Has anyone experienced a huge change in preset sounds after changing pickups in their guitars? I just had a Seymour Duncan JB installed in the bridge and a 59 in the neck of my PRS SE Custom 24. These replaced the originally 85/15s pickups which I thought were ok, but never satisfied with the sounds. I play lots of different styles from Steely Dan to Tool to Opeth to Porcupine Tree, so versatility is important for me. The clean sounds from these pups are amazing, didn’t know this guitar could sound so beautiful. But, any tones with gain or distortion sound absolutely terrible in every position. I usually only use the bridge for high gain and it sounds flat, harsh with no punch. Every preset with gain sounds the same no matter the amp model or different signal chain. Thanks so much for your help. Best regards, Derek
-
I am just learning my new HX stomp XL. In many factory presets amps or distortions have a question mark. It is said: "not recognized in this version of the HX stomp" I used a normal XL stomp before and everything was fine. I hope I will be able to import my selfmade presets into the XL and everything will work fine. Any experiences?
-
How to control and change Helix presets to sync with lyrics/songsheets on iPad by using OnSong. My Need: I wanted my guitar and vocal effects preset on the Helix to change depending on the song currently displayed on my iPad. So, Song 1 on my iPad would have a preset attached to it and when I flipped to Song 2 on my iPad, the preset would change on my Helix automatically. My Setup: I have an iPad with the OnSong app, Helix Floor and a iRig BlueTurn bluetooth page flipper pedal I have my iPad directly connected to the Helix via USB (and usb to lightning adapter). The only thing you need to make sure of is that, in the OnSong Settings, you have MIDI enabled. On the Helix make note of the MIDI Channel your Helix is assigned to (this can be assigned to any number) and that your Helix is sending MIDI through USB in the Global Settings panel The Solution: HELIX SETUP: 1. Go to your Preset List page (push down on Preset knob) and select the preset you want to sync to OnSong 2. Take note of the MIDI info. There should be 3 groups of numbers. For my example, Semi-Charmed Life's group of numbers read CC32: 003 | PC: 045 | CC69: 000 3. CC32 is the Control Channel number. 003 is the bank or folder in that Control Channel (which is labeled 4 FD in my Preset List). 4. PC: 045 is the Program change number, or in my case, the song Preset number. 5. Basically, those numbers mean that Semi-Charmed Life is located in Control Channel 32 in Folder 3 as preset 45. 6. All of these settings are distributed through MIDI Channel 5; which was established earlier in the My Setup section. **TAKE NOTE of the above parameters as you will be referencing those in the MIDI setup in OnSong** ONSONG SETUP: 1. Go to the song you want to sync in your Onsong app. For Reference, mine is Semi-Charmed Life 2. Press and hold on the Title of the song until the MIDI panel pops up 3. Add a MIDI command by clicking on the + icon in the bottom right of the popup 4. Hit the + icon and under TYPE, select Program. Under CHANNEL, select 5. Under the PROGRAM section below, select the preset number (which is 45 in my example). In the Bank section, we will leave Bank MSB alone and just change the Bank LSB to 3 (which is the bank/folder number my preset is located in Click DONE. Set up those parameters for a couple songs and flip through your songs on your OnSong App. The corresponding Helix preset should change along with it. Once you get the hang of the settings, adding multiple songs becomes quite effortless. THAT'S IT!
-
The BUNDLES and PRESETS files which can be saved and loaded to and from your computer using "Spider IV Edit", have the exact same parameters structure (that I won't detail here), at the EXCEPTION of ONE SINGLE DIGIT in both BUNDLES files (.s4b as file extension) and PRESET files (.s4e as file extension). The BUNDLES files for the Spider IV 75 have "02" as exadecimal value in the 12th position from the beginning of the file, and the BUNDLES files for the Spider IV 150 have "04" as exadecimal value in the 12th position from the beginning of the file, as shown in the scre en copy about BUNDLES. The PRESETS files for the Spider IV 75 have "02" as exadecimal value in the 20th position from the beginning of the file, and the PRESETS files for the Spider IV 150 have "04" as exadecimal value in the 20th position from the beginning of the file, as shown in the screen copy about PRESETS. You can export a PRESET or a BUNDLE from on amp to the other, BUT, you have to edit the PRESET or the BUNDLE file in order to have the appropriate value in the position previously mentioned. After exporting, you will have to edit the "volumes" of the presets, because both amps have a different responses in terms of "balance of volume" between different amp models. -
Does anyone know if presets for the HX Stomp Will work with the HX Stomp XL meaning can I import all my presets from my HX Stomp to the new HX Stomp XL?
-
Hey everyone - Maybe a silly question, but I can't figure this out. Question: Can Helix Store the Stomp / Snapshot mode with the individual presets? If so, where do I change that from global to by-preset? My Helix is used in a worship ministry and is used by two different guitarists. One player has presets based on 8 snapshots. The other has presets based on 4 snapshots on the bottom and 4 stomps on top. Before each service, I have to change the global settings to accommodate each player. Sure would be easier if I didn't have to make that change in the global settings each time. Thanks! Brad
-
This is my goal. I want to set up the bottom row of buttons to be specific tones. Example: metal/clean/classic rock/acoustic Sim. Then I would like my top row of buttons to be stomps that I can add to any given tone from the bottom row. Example: phaser/pitch shifter/boost/chorus. Is there any possibility that the helix can be set up this way? Essentially, this is the type of setup that I use on my XT LIVE.
-
Hola amigos, soy nuevo por acá. Recién compré una Pod Go, Pensé que al encenderla ya iba poder disfrutar de los sonidos que trae de fabrica la pedalera. Pero viene vacía, sin ningún sonido y no sé qué hacer, alguien me podría ayudar?
-
Hello all, I'm wondering if there is a way in Pod Go to set up a Global effects loop parameter. In other words, instead of activating and placing the mono effects loop block in every preset by hand, is there a way to activate the effects loop to 'always be on' on all presets. thank you.
-
Is there any way to simply delete unwanted setlist and presets from the Helix using HX Edit or even on the unit itself? I updated to 3.0 and was worried about overwriting old presets with the new ones so now ended up with Two sets of Factory 1 and 2 Setlists - the old and the new!
-
I welcomed with anticipation the new method of Helix linking its IRs to Presets with what appears to be the IR name (vs the index number in the list of IRs). My understanding of how this is supposed to work, is that once you have specified which IR a preset is based on, the preset is supposed to be smart enough to "find" that preset based on name -- in the list of IRs. I think this is supposed to provide the user the flexibility to rearrange the IRs without worrying about having to re-link the presets to new IR index numbers. I did some testing, and for the most part it, this feature SEEMED to work on my laptop. If you moved an IR, re-clicking on the preset would re-link to the IR in its new location.. I also found that if you deleted an IR, re-clicking the preset would produce an error message. I found however that on a number of occasions that if an IR was deleted, an error message was NOT presented when you re-selected the preset. What happened in this case was that the preset definition had been updated automatically to point to IR number 127 which was empty. In both cases, the name of the preset was lost. (It would have been more useful if this name had been displayed in the error message saying it could not find this IR). In addition, after spending THREE HOURS fixing my presets so they pointed to the proper IRs (they had gotten mixed up in the upgrade)... I created a bundle of my patches as well as some setlists, and then happily went to my second computer, fully expecting that I could just copy in my IRs to Helix Native, and then import my bundle or the setlists -- and then the preset references to the IRs would all sort themselves out... Nope. This did not work. Only about a half of the references to IRs were resolved, even though all my IRs were all copied into Helix Native first. Could anyone please confirm: - has anyone else experienced this bug? - am I doing something wrong: do the IR references not get copied into the bundles and setlists? Do I need to manually export and import each single preset in order to preserve the IR reference? (I certainly hope not! That would be way to much work). If someone from Line6 is reading this, could you please reply and comment on how this new feature (to co-ordinate presets and the IRs they reference) is SUPPOSED to work? Thanks for your help. Richard.- 1 reply
-
- 1
-
-
- impule responses
- presets
- (and 5 more)
-
I am a relatively new POD HD500 user, just bought a used one a few weeks ago. I use it through L6Link (XLR cables) w/ my Line6 DT25 112 combo. Yesterday during testing w/ my band, something strange happened. In general I use 2 banks of presets within the user setlist#1 - 1A through 2D. Depending on the songs we played yesterday I switched between presets in the 2nd bank (2A to 2D) of this setlist which contain AC15 pre, AC30pre, BF Double pre, and BF 'Lux pre, all in combination w/ some FX's. All of a sudden I noticed that preset 2B no longer contained the AC30pre but had been overwritten by a preset called 'Middle Pups' (which sounds funny in German, BTW) w/o me having changed or saved anything! Looking at the list of presets, I saw, that 'Middle Pups' usually is on 2B of the setlist L6LINK<->DT. So, it obviously was copied from 2B of one setlist to 2B of another setlist w/o any user action. Any idea how something like this can happen? Has anyone made a similar experience? Regards from Germany Wilfried
-
hx stomp Disable the access to the bank of presets in Snapshot Mode
guitarsoundy posted a topic in Helix
Hi, I use a HX Stomp for several months for professional use and I really like it. I built a external footswitch to change presets (FS4-5) and I'm using the HX Stomp in Snapshot Mode, that's great ! But... My problem : when I play in live conditions, I'm not that precise and I often step on 2 footswitches instead of the right one, so it open the bank of presets, which is really (really!) not confortable before a solo!... My question : is there a way to disable that function? I mean, keeping the control of snapshots with the footswitches but nothing else. I can't find anything in the Global settings... If not, is there a way to submit this idea to Line 6, and hoping they include it in a next firmware? By creating a petition or something like that... :) Thanks for your help! PS : "be precise" is not an valid answer ;)
