Jump to content

Search the Community

Showing results for tags 'presets'.



More search options

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Forums

  • Community Support
    • Multi-Effects Units
    • Variax Instruments
    • Amplifiers
    • Computer Based Recording
    • Live Sound
    • Pedals/Controllers
    • Dream Rig - Line 6 Product Integration
  • General Discussion
    • Share your Settings
    • Line 6 Lounge

Categories

  • General FAQ
  • Tutorial Videos
  • Effects/Controllers
    • HELIX/HX
    • Firehawk
    • FBV Controllers (MKI / MKII/ 3)
    • M5 / M9 / M13
    • JM4 Looper
    • Stompbox Modelers / ToneCore
    • ToneCore Development Kit
  • Recording
    • Helix Native
    • Echo Farm/Amp Farm
    • POD Farm / POD Studio / TonePort
    • Computer Audio Set Up and Troubleshooting
    • Riffworks Line 6 / Standard Edition
  • POD
    • POD HD Family
    • POD HD500/HD500X
    • POD HD300/400
    • POD X3 Family
    • POD 2.0 / PODxt Family / Pocket POD / FloorPODs
  • AMPLIFi Series Products
    • AMPLIFi 30/75/150/TT
    • AMPLIFi FX100
    • Videos
    • Tone Creation
  • Amplifiers
    • Spider V
    • Powercab
    • Firehawk 1500
    • DT50/DT25
    • Spider IV/Spider Online
    • Spider Valve
    • Spider Jam
    • Vetta
  • Live Sound
    • Relay/XD-V Digital Wireless
    • StageScape M20d Mixer
    • StageSource Speaker
  • Guitars
    • JTV / Shuriken / Variax Standard / Workbench HD
    • 1st Gen Variax Guitars / Bass / Workbench
  • Mobile Products
    • Sonic Port devices / Mobile In
    • Mobile Keys
    • MIDI Mobilizer
    • Mobile POD app
  • Dream Rig
  • Legacy Products
    • Amps
    • POD
    • Effects and Controllers
    • GearBox
    • Line 6 X2 Digital Wireless

Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Joined

  • Start

    End


Group


AIM


MSN


Website URL


ICQ


Yahoo


Jabber


Skype


Location


Interests


Registered Products

Found 100 results

  1. mhardy58

    2.8 Lost Preset Fire Woman

    A factory preset called 'Fire Woman' was lost when upgrading to v2.8 and I am hoping someone might have an archive of the original. The 'Fire Woman' preset had a Weeper wah, Bucket Brigade delay, Script Mod Phase modulation and Plate verb.
  2. arislaf

    Helix presets ready to mix

    Hallo all! Just made all the guitar amps of helix ready for mix, dual tracked, equalized, etc. Just upload these to your helix and enjoy! P.s. All amps have different sound, some are for busy mix, other are overwhelming, other underwhelming. Depends on the mix. Meaning, that your favorite amp may not sound what you like. Instead, I made all amps with different flavors. Close your eyes, and try the amp by each own. You will not believe that the amp x works better than your favorite amp on the mix. Also, please try and give a comment. https://www.dropbox.com/sh/4r7gucctc4ydkye/AACzuVidRrsSbORyqG72fpwSa?dl=0 p.s.2 for the jtv users, i used the bundle to make these sounds, https://www.vguitarforums.com/smf/index.php?topic=24065.0
  3. Note: This will erase all current presets and restore the factory sounds, so please save your sounds on a second source if necessary. AMPLIFi 30/75/150/TT: Press and hold the Master Volume knob and Tone button as you power up the amp. AMPLIFi FX100: Press and hold the Master Volume knob and the TAP button as you power up the unit. Axsys 212 or AX2: Press and hold the "User/Preset" and "Save/Store Sounds" buttons, and keep holding as you turn the unit on. DL4: You can reset your pedal to the factory settings by powering it up with the A and D footswitches held down - the power is turned on and off on the modeler pedals by inserting a plug into the left mono input jack. Duoverb: Hold A & D while powering unit. DT25/DT50: Requires a MIDI-to-USB interface with driver support from manufacturer (M-Audio MIDIsport series, Yamaha UX16, etc.) and use Line 6 Monkey via USB connection to MIDI In and MIDI Out of DT50 for a firmware re-install. DT25/DT50 Firmware Update Instructions Firehawk FX: Press and hold the Master Volume knob and the TAP button as you power up the unit. Unfortunately, any patches not backed up to My Tones prior to the reset will be lost. Firehawk 1500: Press and hold the Master Volume knob and the Navigation Encoder (the scroll wheel) as you power up the unit. Flextone I &II: hold down A, B, C, and D while powering the unit on. Flextone III: hold the A and D Buttons while powering up for 8 seconds. Bass POD: press and hold the up and down arrow buttons as you power the unit on for ~ 5-7 seconds or until it goes to the preset 1-A Bass POD Pro: Hold the UP and DOWN arrow key down as you power on for ~ 7 seconds. Bass POD XT Pro and Bean: press SAVE once, use the select key to scroll clockwise to the factory recall page, then press SAVE twice. Bass POD XT Live: see POD XT Bean/Live/Pro Bass Floor POD: Hold COMP and FX while powering up. When 01 appears, disconnect power. Power up. Floor POD: Hold MOD and DELAY while powering up. When 01 appears, disconnect power. Power up. Floor POD Plus: Hold BANK UP and BANK DOWN while powering up unit (display will read INT) Four Button Modeling Pedal: (DL-4, MM-4, FM-4, DM-4): Hold A and D footswitches and power up - the power is turned on and off on the modeler pedals by inserting a plug into the left mono input jack. Helix Floor/LT: Turn unit off and then back on. Hold in Footswitches 9 and 10 right after you turn the unit on, throughout the boot process, until you see that your factory presets are loading. Helix Rack: Turn unit off and then back on. Hold in Encoders 5 and 6 right after you turn the unit on, throughout the boot process, until you see that your factory presets are loading. HX Effects: Turn unit off and then turn back on. Hold Footswitch 6 and Tap throughout the boot process, until you see that your factory presets are loading. If you run into any trouble with a failed update or your unit will not boot up, try powering on while holding the right arrow ">" This will put the unit into update mode and you can re-install the latest firmware from there. HX Stomp: Turn unit off and then turn back on. Hold Footswitches 2 and 3 as the unit boots up. HD147: hold the A and D Buttons while powering up your amp. JM4: Hold down the settings/tone button as you power the unit on and hold the button for 5-8 seconds. M5: Press and hold the TAP button and tap the Model Select knob to enter the setup menu. Tap the model select knob until you see the MIDI, Tempo and Gate functions. Turn the model select knob until the corresponding display shows RST FACT. Hold the On/Off switch and tap the model select knob twice to reset the M5. M9: Press FX Unit 1B and 2B switches at the same time to enter the setup menu. Press the Model Select knob until the display reads MIDI Gate Display across the top. Turn the Model Select knob until the corresponding display shows RST FACT. Press and hold the TAP button just before (split second) pressing the Model Select knob. Its like pressing them down at the same time, but making sure the TAP button is pressed first. Do that once again to reset the M9. M13: Press and hold Looper Controls to enter the setup menu. In FX UNIT 4, turn the Model Select knob until the corresponding display shows RST FACT. Press down on the Model Select knob twice to complete the reset. Lowdown: power on while holding down the 'A' button for 5-8 seconds. POD/POD 2.0/Bass POD/POD Pro: press and hold the up and down arrow buttons as you power the unit on for ~ 5-7 seconds or until it goes to the preset 1-A Pocket POD: Hold the save button and 4-way arrow key up while plugging a cable into the instrument input to power the unit on. The unit will prompt for a factory reset, press save to initiate the factory reset. You can also re-install the flash memory on the Pocket POD by connecting to your computer via USB and using the latest version of Line 6 Monkey. In the UPDATES tab of Monkey, click on Flash Memory, then click 'Re-Install Latest' or 'Update Selection'. POD X3 - Bean/Live: Press and hold the "Home/Hold For Commands" button, select "Reset User Presets" and press the "Save" knob to reset the User bank to its factory presets. POD XT: Bean/Live/Pro: You must re-install the flash memory on the PODxt device to reset the unit back to factory settings. Check out this link for instructions. PODxt reflash instructions. POD HD300/400: POD HD300/400 Factory Reset Video Tutorial POD HD500/500x/HD/HD Pro: You must re-install the flash memory on the HD device to reset the unit back to factory settings. Check out this link for instructions POD HD500 Factory Reset Video Tutorial Powercab 112 Plus: Re-flashing the firmware will effectively perform a factory reset. Rackmounted Pro Effect units MOD Pro/Filter Pro/Echo Pro: press MIDI/Sys, use program select knob to FR (save button will begin flashing). Turn speed knob all the way up to "all", press save twice. Relay G70/75 From the edit menu, select "Factory Reset" and press the Nav/Select Encoder. Turn the Encoder to select OK, or cancel to exit. Press the encoder button to commit your selection. Spider I, II, III, IV, Micro, and Valve Series: Hold down the A (or clean) button as you turn on the power and hold the button for 5-8 seconds. Spider V Hold down the Home button to access the settings menu. Scroll down with the encoder to where it say Factory Reset. Scroll to the right and press to encoder knob to hit Yes. Spider V 20: Hold down all three FX buttons, then press and release 'save' while the amp is turned on. Spider Jam: Hold down the settings/tone button as you turn on the power and hold the button for 5-8 seconds. Stagescape M20d: You must tap the "i" button in the upper right corner of the Main Toolbar. Then tap Show System Settings > backup > Restore Factory Settings. **Warning!** This procedure will erases ALL stored presets on the unit and reverts to the factory presets provided by Line 6 in the latest installed firmware. Variax Electric and Acoustic Guitars and Basses You will have to connect your VARIAX to the WORKBENCH, POD XT/X3 LIVE, or VETTA II to reset your factory default settings. Then you will have to connect your interface to your computer. Here are the instructions for each: Variax Electric 300, 500, 600, 700 and James Tyler Variax Guitars These instruments can only be returned to factory reset by reinstalling the flash memory. Connect the Variax digital guitar cable to your Variax interface (you will need to have the unit powered the with TRS cable unless you are using a POD XT/X3 Live or Vetta) to the Line 6 Monkey, select your variax instrument, choose firmware (in the updates tab), and select "reinstall latest". Variax Reflash and Software update F.A.Q. Variax Acoustic (Steel String and Nylon) 300 These instruments do not have a reset function. The presets are simply a variety of settings that the user can overwrite. In other words, the user cannot lose anything, except for the original settings that are provided as examples/starting points. Variax Acoustic 700 - Soft Reset Start with unit off (TRS cable and/or Variax Digital cable unplugged from guitar). Rotate the model selector to the SITAR position. Press and hold model selector (as in Save routine) while inserting TRS cable or Variax Digital cable to power up the unit and perform reset. For a full reset, please follow the Variax Electric Guitar procedure as described above. Variax Bass 700 705 Factory defaults must be restored one at a time. Select the Model you wish to normalize. Place the blend and two tone controls in the detent position. Now press the Model select pot down until the indicator light stops flashing. The Model should now be restored to factory settings. Use this procedure for any model you want to restore to the factory setting. Vetta I & II Soft Reset: Press the save button, and spin the Page knob until you get "Reset USER memory?". Press the Save button again and you will see the Vetta count through the channels one by one. Hard reset: Vetta Reflash procedures Rackmounted Pro Effect units
  4. Helix Native • Download the latest version of Helix Native at https://line6.com/download-helix-native. • Run the Helix Native installer. We suggest you temporarily disable all third party antivirus programs during installation. Follow the prompts and restart your computer if required. • Launch your DAW, plug-in host, or recording software, and insert Helix Native into an audio track as an effect. (Note: the plug-in may also be used via an aux bus.) • Log in with your account you used to purchase or activate Helix Native. • Click "Authorize This Computer" or the blue link displayed in the dialog. • Click here to view Helix Native tutorial videos and knowledge base articles. Marketplace Presets and Impulse Responses • Download your products from the Helix Marketplace section within your Line 6 account page. • Unzip the downloaded files. • Import presets and impulse responses into HX Edit or Helix Native. Follow the user guide for both applications for how to import these assets. • HX Edit and Helix Native will need to verify your purchase online and will post a log-in dialog. Please log in with your Line 6 account credentials. Your log in data needs to be identical to the one used for your purchase. Authorization will occur automatically. • Marketplace products have minimum software and firmware requirements: Helix/HX firmware version 2.7 or higher HX Edit software version 2.7 or higher Helix Native software version 1.7 or higher POD Farm 2.5 • Download the latest version of POD Farm 2.5 at https://line6.com/software/. • Run the POD Farm 2.5 installer. It will install Line 6 device drivers, if chosen, in addition to POD Farm 2.5. Follow the prompts and restart your computer. • Navigate to the Line 6 folder on your computer and find the Tools folder. Run the Line 6 License Manager program. Select your computer and/or Line 6 hardware device and authorize each one separately. You are now ready to use POD Farm 2.5 in standalone mode, or as a plug-in with your recording software. • Click here to view POD Farm tutorial videos and knowledge base articles. Model Packs • Standard model packs can only be used with a Line 6 device OR a computer authorized with POD Farm 2.5 or better. HD model packs are only compatible with POD HD devices using firmware 2.62 or better and are not compatible with POD Farm 2.5. • Download the appropriate device drivers and the License Manager program from https://line6.com/software/ and install them. • Navigate to the Line 6 folder on your computer and find the Tools folder. Run the Line 6 License Manager program. Select your computer and/or Line 6 hardware device and authorize each device separately. You are now ready to use your model packs. • For more details, click here to see our License Manager FAQ. iLok (POD Farm or Echo Farm) • Log in to your Line 6 account and go to https://line6.com/account/licenses/ilok/. • Click on the deposit button, and enter the user name for your iLok.com account. If you enter the incorrect user name, the license will be lost and can't be recovered. • Go to ilok.com to download the iLok License Manager program. This program will add your Line 6 license to your ilok device. • Once that's done, download and install POD Farm or Echo Farm from https://line6.com/software/ to use as a plug-in with your recording software. Your iLok must be connected when using POD Farm or Echo Farm as a plug-in. ________________________________________ If you run into trouble with your activation, please contact Line 6 Customer Service via support ticket at https://line6.com/support/tickets, or by calling us at 818-575-3600, option 2 Mon-Fri 8am - 12pm and 1pm - 4pm. Returns Please know that iLok licenses cannot be refunded, as Line 6 cannot remove licenses from iLok.com accounts. For non-iLok licenses, if you are looking to return your software within 15 days of its purchase, please deauthorize your devices, then create a support ticket at www.Line6.com/support/tickets requesting a refund. The refund will settle within 5-7 business days.
  5. jtsuth

    How to save presets??

    Dude this is getting ridiculous. How do I save newly created presets and changes?? I'm using Logic Pro X and I cannot for the life of me figure out what I am doing wrong here. I create a preset or I make changes to a preset, I click the drop down at the top left of the Helix Native plug-in and click SAVE. It acts like it saves something. I double click to a different preset then back. Changes are GONE. WTF am I doing wrong? Please help me as I am at the end of my rope here. I wanted to create, not perform IT functions in order to be able to do so. Thank you to anyone that can help me out here.
  6. DaveLeRoux

    Helix setup flexibility

    HELP PLEASE! Does anyone know if it is possibile to make helix remembering the last snapshot I used within a preset when I come back from another preset??? THANKS
  7. ferargue

    links to download presets

    Hi, I'm new to the Helix LT and I'm looking for links to download presets. I have seen here a topic where a lot of links to download IRs and cabs are included and I wonder if there is something similar for the presets Thank you! regards!
  8. Application Q: What are the presets on my Spider Valve Mk II amplifier? A: There are 64 presets (16 banks of 4) programmed into the amplifier at the factory, and 64 “empty� preset locations for an end user to program. The “empty� 64 preset locations have defaults (1-4) in them as a starting place. Q: I noticed that the Artist/Song Presets from the Spider IV are not present on the Spider Valve Mk II? A: Yes, as many end users had asked for more locations to store their personal presets, we have removed the artist/song presets for the Spider Valve Mk II. Q: Are the Spider Valve Mk II series amps Mono(phonic)? A: Yes, the Spider Valve Mk II series amplifiers have a monophonic output (as are most tube amplifiers). Q: How can I connect a POD unit to my Spider Valve Mk II series amplifier? POD Connections, Routing and the 4 Cable Method Q: Do the Master volume and presence control applied to the power amp section only? A: Yes, the master volume and presence control are true analog. Q: Where is the Master volume located in the chain? A: it is after the preamp, and before the power amp. Specifications Q: What are the specifications of the Spider Valve Mk II series? Spider Valve Mk II Specifications Q: What speakers are used in the Spider Valve Mk II amplifiers? Spider Valve 112: Celestion Vintage 30, 8 ohm Spider Valve 212: (2) Celestion Vintage 30s, 16 ohm Spider Valve 412 cabinet: (4) Celestion Vintage 30s, 16 ohm Q: What tubes ship in the Spider Valve Mk II amplifiers? What is the power output? Spider Valve Mk II 112 & 212: (2) Sovtek 12AX7B preamp tubes, (2) Sovtek 5881/6L6WGC power amp tubes. 40 watts. Spider Valve Mk II HD: (2) Sovtek 12AX7B preamp tubes, (4) Sovtek 5881/6L6WGC power amp tubes. 100 watts. Q: What are the function of the 12AX7 tubes? A: V1 is the booster to the output tubes, V2 is the phase inverter for the output tubes. When viewing the SV MKII HD100 upright from the back, V1 is on the right side. On the combo, V1 is on the left side. Q: Can the Spider Valve Mk II handle another 12A_7 style tube without damage to tubes or circuitry? A: Yes, but as these tubes act as a phase inverter and a boost to the power amp (rather than traditionally "cleaning up" the preamp section), you may not get the result you are looking for. Q: What Line 6 controllers work with the Spider Valve Mk II series amplifier? Controller compatibility chart Setup/Connection Q: Is there a bias switch to change the power tubes to EL-34s or other power tube types? A: No, the Spider Valve Mk II does not offer bias switchable options and was designed to only be used with 6L6 power amp output tubes. Q: Is there a headphone output on the Spider Valve Mk II series? A: There is no headphone output on the Spider Valve Series, but you can use the XLR output to go to a mixer, then use the headphone jack from the mixer. Q: Can I run my Spider Valve Mk II amplifier without a speaker load? A:No, you cannot run the Spider Valve Mk II series without a speaker load. Please see the following link for more information on cabinet connections: Cabinet Connection and Ohm F.A.Q. Q: Can the Spider Valve Mk II be run with a Variac? A: This is not recommended as the lower voltage can cause problems with the digital processing in the Preamp section of the Spider Valve Mk II. Q: Can I run a Palmer S.E., THD Hot Plate, Power Soak, etc. for speaker simulation or power attenuation? A: There are no known issues regarding the use of any direct recording simulators or power attenuators between the power amp output and the speaker cabinet, but if there is damage caused by improper connections or malfunctioning gear it will not covered under the Line 6 warranty. Q: Do the Spider Valve Mk II 112 and 212 combos support external speaker cabinets? If so, will the external cabs mute the internal speakers of the Spider Valve Mk II? A: Yes, the Spider Valve Mk II supports the use of additional cabinets. Please ensure that the ohm load is correct to avoid damaging your amplifier if you intend to use both the internal and external speakers simultaneously. Q: What is the bias voltage for the Sovtek 5881WXT tubes? A: 35 mV (+/-2mV) Q: Does the XLR output still send signal when the amplifier is on standby? A: In some cases yes, in some no. Spider Valve MkII actually has two different modes of Direct Out, which can be found in the SETUP menu in Edit Mode. They are Studio and Performance. Studio mode is a traditional, DSP POD-style output with speaker simulation and will function when the amplifier is in standby mode. In contrast, Performance mode takes a tap off the output transformer, then goes through the speaker simulation before going through the Direct Out. This allows the tubes to interact with the DSP, and because the amp has to be on to allow this to happen, there will be no signal at the XLR output in standby if Performance mode is selected. Q: Does the Spider Valve Mk II have an FX loop? A: the Spider Valve Mk II has a pre-amp out (effect send) and Power amp in (effect return) section. Q: Is the effect loop series or parallel? Is the effect loop mono or stereo? A: The effect loop is series mono. Q: Does the Spider Valve Mk II have MIDI ports? A: Yes, the Spider Valve Mk II amplifier series has both MIDI in and MIDI out ports, and the Spider Valve Mk II will accept MIDI program changes on MIDI Channel 1-16, from values 00-127. The MIDI channel assignment can be accessed by pushing the “preset� encoder and using the left/right arrow key to reach “MIDI�. This greatly increases the opportunity to integrate Spider Valve MkII’s into your existing rig, and will also allow you to update your amps firmware via MIDI. See the advanced user’s guide for the full MIDI story. Q: Can I send a MIDI output from the Spider Valve Mk II to another MIDI-capable Line 6 amplifier and control both amplifiers with one FBV controller? A: Yes, but as different Line 6 amplifiers have different MIDI implementation you will want to go through each control on the FBV to ensure that you get the desired control on both units. Q: Is there an editor where I can connect my Spider Valve Mk II to my computer and edit/store tones? A: Yes, Spider Valve Edit is the editing software that can be used to edit the Spider Valve Mk II. Please see the following link for more information: Spider Valve Edit FAQs Q: What do the FBV Shortboard series stomp, FX Loop/Function 1, and Function 2 do? A: The Stomp button activates the "boost" on both the original FBV shortboard series (Mark I) and Mark II controllers. The FX Loop (Mk I)/Function 1 (Mk II) activates the Noise gate. The Function 2 (Mk II only) activates the loop feature on the Spider Valve Mk II. Q: What do the FBV Shortboard MkII Function 1 and Function 2 buttons do with Spider Valve MkII? How is it different from the original FBV Shortboard? A: The Function 1 button activates the Boost setting saved with each preset. The Boost setting (up to 8db pre and/or post amp model) can be found by entering “edit mode� on the SV MkII and pressing the R arrow on the 4-way nav button. The button equivalent to Function 1 on the original FBV Shortboard is labeled FX Loop. The Function 2 button (FBV Shortboard MkII only) is equivalent to the Quick Loop button on the faceplate of the SV MkII, and arms the built in Looper. For full functionality of the Looper, see the Spider Valve MkII Advanced User Guide. In addition, the Stomp button activates the first Smart FX on both the original and MkII FBV Shortboard controllers. Q: Can I run the Spider Valve Mk II head with only the outer two power tubes (removing the inner pair) to operate at a lower output volume? A: Yes, it is safe to run the Spider Valve Mk II Head with two 6L6s. It is recommended that the output impedance be run at "half" when running in this configuration. An example would be running the 8 ohm head output connected to the 16 ohm cabinet connection, or the 4 ohm output to an an 8 ohm cabinet connection. Line 6 recommends re-biasing your amplifier to 35mv after removing the tubes, as the current draw will have changed. Q: Where is the fuse located in the chain? A: The fuse is located between the 12AX7s and 6L6s (there is no “master� fuse). Spider Valve Cabinet FAQs Q: What are the specs for the Line 6 4x12 cabinet? A: 9 ply, ¾� wood with Celestion Vintage 30 speakers. There is no “internal baffle�. Q: What are the ohm load options for the 4x12 cabinet? A: The switchable ohm load options for the 4x12 cabinet are 16 ohm mono, 8 ohm stereo, and 4 ohm mono. Trouble shooting Q: What is the manufacturer’s warranty for Spider Valve Mk II? A: The warranty for the Spider Valve Mk II amplifier is 12 months from the date of purchase, the tubes warranty is 90 days from the date of purchase. Q: How do I perform a factory reset on my Spider Valve Mk II? A: The factory reset for the Spider Valve Mk II series is to hold the "A" button while powering the unit, then pushing the “presets� encoder twice. Q: I hear a loud "pop" when I switch between certain presets on the Spider Valve MKII. Is this normal? A: Sometimes if the Channel Volume is set or saved too low on a preset a loud pop will be heard when navigating to it and away from it. This is because of the level difference between it and the other saved presets. Try adjusting the preset's Channel Volume above "12:00" and saving again. This should level out the difference between the presets and eliminate the popping sound. Q: Will using different brands of 6L6 tubes in the Spider Valve Mk II void the warranty? A: No, feel free to experiment with other tubes of the same type as long as they are correctly biased. Q: My amp seems to be malfunctioning. What can I do as an end user? Amp Troubleshooting Tube Troubleshooting and Replacement *Q: Where can I download a Spider Valve Mk II manual? Line 6 Manuals Miscellaneous Q: Where can I get a cover for my Spider Valve Mk II amplifier? Cases And Covers
  9. Hey ya'll, I searched the forums for this exact question and haven't had any luck yet. I'm still fairly new to the HX Stomp. I wish to move through the Presets (i.e. 35b, 35c, 36a, 37b, etc), while in stompbox mode, with my foot instead of bending down to turn the top wheel. Is that possible with an external pedal of some kind, or is there a way within the Stomp itself? Maybe I completely missed this in the manual. Thanks!
  10. AlexKenivel

    Amp+Cab Preset Pack

    bit.ly/AmpCabPack These are (now 31) very simple Amp+Cab presets for any Helix device with amp models, meant to be a “jumping off” point for bigger presets. Every preset contains an Amp+Cab block, with a few of the amp’s parameters assigned to Footswitch 1 for a different sound, kind of a Clean/Dirty channel thing. There are two folders, one for Stomp and one for the Floor/LT/Rack/Plugin (the later named “Full”). These presets were programmed with an HX Stomp playing though Yamaha HS5 studio monitors in a treated room, cross­referenced with a QSC K8.2. I’ve tweaked each preset using 4 guitars so they’ll hopefully sound good with whatever you’re plugging in with minimal tweaks. The 4 guitars I used are: a vanilla Strat with a MIJ Body with MIM electronics and a Warmoth neck, a Strat with 500k pots, a SD Hot Rails in the bridge position and noiseless single coils (bright sound) — a stock PRS S2 Standard 24 (warm sound) — and an Ibanez Iron Label S 7 string with Dimarzio Ionizers (high output). Yes, I ran a 7 String through a Fender Champ model and it was FUN! Leave some feedback or questions if you'd like. Thanks and enjoy, Alex Kenivel PS this is the third revision of this pack. More presets will be added so watch this space for more.
  11. josesoto14

    Hd 400 Issue With Presets Triggers

    This strange thing happened to me today, i plugged my hd400 and after booting i noticed that the presets triggers ABCD weren,t working, not even the green lights, the mode switch neither, all the other buttons were functional, i can change amps, effects, tweaks, i can even change banks number, but cannot select any of the letters in the selected bank number. Please help, is this a firmware issue or a hardware problem¿¿¿
  12. mtreehugger

    Variax Standard, you complete me

    I finally found a great deal on a (not) scratch n dent V-Standard at SW, and after 2.2 days I'm starting to get blown away. Let me back up. I entered the modeling realm with an HD500 when they were fresh (what, 2010?), thinking that I'd have more capability than the Spider Valve MkI that amazed me. First thing I noticed on the POD was that all the stock presets sucked. Playing at very low volume, I had to develop my own, which relied on a fair bit more gain than I'd normally go for in order to achieve any kind of crunch. I moved from FRFR to DT amps, but still, always kinda had more gain than I wanted (except when I went totally clean with the lovely Twin model). I picked up a Variax 600 and finally reached "dream rig" status, but really only liked the Strat models, Tele neck, and the Rick bridge. The alt tunings seemed kinda crappy too. Most of the other electric models were just too loud--much louder and with more gain than my real guitars with hot pups. When I first tried my new V-Standard, it was looking like more of the same (except usable mags). So I wondered, how do I get away from my presets with too much gain and into presets that work for my Variax? In an epiphany of sorts, I started trying out all those presets in my HD500 that sucked, and guess what? NO MO SUCKY! They're amazing, for the most part. Also, to my surprise, they all have variax settings already. So all I had to do was plug my dream rig in, using an ethernet cable and the digital L-6 Link, and now folks, I hardly have to tweak, I can just play my heart out! Turns out those patches were very well crafted using Variaxes of some kind, and so far about 2/3 are keepers! Has anyone else noticed this as well, or am I the first to stumble on this total treasure chest? The magnetic pickups are pretty sweet too! But the other thing I'm really thrilling over is the neck on the Variax Standard. I was afraid that something this flat, this thin, and with medium frets might not work for my aging knuckles, but I gotta tell you that even with 10's at concert pitch this thing is a joy for my hand! It's the most comfortable neck I've felt since the Japanese Variax 700 I've been wishing I'd have bought--and that's saying a lot. I do have questions: Is the light on the alt tuning knob supposed to be only momentary (unless you go to the "model" position)? I wish the thing would stay lit in mag mode so I could dial up the tuning I want without activating all those other tunings in between. Does anybody know how hard it would be to change pick guards? I'm thinking white would look very sweet with my sunburst brown... THANKS!!! Mike
  13. redrain27

    Spider Remote

    The spider remote has 4 user banks. How do I save a preset to one of those banks. Thank you.
  14. RandallBSmith

    Helix jazz tones

    I'm new to Helix, having used it for about 3 weeks. I have had no history of working with modeling equipment and software. I've gone through most of Jason Sadites' tutorials - very instructive and helpful. I am interested in developing some presets for jazz guitars, particularly hollow bodies such as the D'Angelico Excel EXL1. I'm looking for a clean, round sound. I've attached a preset I made with dual amps and cabs, hopefully to give more depth to the tone. I'm using a Roland 40 amp, but plugging the Helix into the effects jack on the back; this appears to bypass the preamp. The tone was created for the D'Angelico. I applied some compression to the lows and highs of both modeled amps to decrease muddiness and too bright tonalities. I used EQs to specifically target frequencies which feed back on the guitar. Any thoughts/assistance in the elements and/or layout of the preset would be much appreciated. Randall RBS JC40 EXL1b.hlx
  15. As I run my Line 6 UX 2 today, all the presets were gone. I refreshed the presets in the tab and after it it was empty. Newest software has been downloaded but this has not fixed my problem.
  16. Paultm

    Snapshots & Presets

    Hi, Anyone use Snapshots and Non Snapshot presets? Current snapshots doesn't give me enough space for additional foot switchable effects.
  17. Hi, I am new to using digital equipment (analog guy) and I replaced my pedal board for an HX Effects. Amp channel switching works fine in preset mode. However, if I want to switch to another preset, there is this short time of no sound, to load the other preset. Here comes in the snapshots, so that problem is solved. But now i cannot use amp channel switching in snapshot mode. Is there solutions/workaround to be able to switch between channels AND without that short period of nothing to load another preset or sound? I hope somebody has an answer to this.
  18. Hi! hoping to share some presets for the HX effects and try some from others. Is their a good place to find / download these as well as IRs. Thanks
  19. I'm loving my Helix for live use and recording. To bring this powerful unit over the top I think LINE 6 should petition/hire Pete Thorn to create and share his presets for the HELIX. I recently watched a Pete Thorn video where he set up a Helix to act as a backup should his amp setup run into technical issues. Given this musician's talent for creating tones, I would imagine these to be VERY realistic sounding patches. In addition, I participated in a chat where Pete himself said he would be game for creating something for Line 6 :-) What do you think Line 6/Helix users?
  20. Hello all, I have an Amplifi 150. When the amp is not connected to a bluetooth phone or tablet, it has 4 "favorite" presets accessible trough the TONE button. To which bank on the remote app do these presets correspond? Bank 1 or the user bank 25 at the end of the list? Thanks.
  21. I just bought a used Line 6 Spider 3 HD150 head from Guitar Center. I powered it up and started to play (through headphones as I do not yet have the cab for it) and it worked fine for about 30 seconds. I looked down at my FBX longboard and noticed that it had switched banks by itself from Bank 2 to Bank 3. I switched it back to Bank 2 and the preset channel I was using, then the sound cut out. After 2 seconds it came back. Then it started doing it over and over. I noticed it was actually powering off and on repeatedly. Any advice on steps I should take to correct the issue? I have 45 days to return it if I can't fix it. Thanks in advance.
  22. My PODHD500 custom presets were deleted once I synced my HD500 with HD500 Edit. Do I have to start over or is there a way to get them back?
  23. Okay, I can't seem to find an answer to this online. All of a sudden, my global settings aren’t saving. I had it set to snap/stomp mode, and 10 switches, but whenever I power it on now, it goes to preset mode and doesn't save the mode I previously set it to. Also, my Helix used to power up on the same preset it was on when powered down, now it just goes to 1A Factory Preset. The only thing I changed was, I was messing with the midi settings the other night, trying to get a midi foot controller I have, to talk to and control the Helix, so I may have changed a midi channel or preference, but that's it.
  24. Q: What are the presets on the Pocket POD? A: The PDF document attached at the bottom of this FAQ lists all of the Pocket POD presets from 1A to 31D. Q: What is the warranty on my Pocket POD? A: The warranty on the Pocket POD is 90 days from the date of purchase. Q: Can I purchase model packs for my Pocket POD? A: No, Line 6 model packs are only available for our Guitarport, Toneport, POD Studio and POD xt family devices. Q: How do I reset my Pocket POD back to factory presets? A: To reset your Pocket POD back to its factory settings, hold the save button and 4-way arrow key up while plugging a cable into the instrument input to power the unit on. The unit will prompt for a factory reset, press save to initiate the factory reset. Q: Can I connect the Pocket POD directly to a P.A. system? A: Yes. You can run a 3.5 mm (1/8")cable directly into a PA. Pocket POD also has one unbalanced 1/4" output that can be connected through a DI box directly into a PA system. Q: Is there editing software available for my Pocket POD? A: Yes. You can download a software editor called Vyzex which was specifically designed to work with Pocket POD, from our software page.http://www.line6.com/software/ Q: Which tones from customtone.com work with the Pocket POD? A: The POD 2.0, POD Pro, Floor POD Plus, and Pocket POD tones are all compatable with the Pocket POD. These tones can be downloaded and installed to your Pocket POD with theVyzex editing software. See the following link to get to Customtone: Customtone Q: What power supply works with Pocket POD? A: The Line 6 DC-1/2/1G power supply (purchased separately from your local dealer) is the supported power supply for the Pocket POD. See the following link for more information:Power Supply and Amp Power F.A.Q. Q: Is the Pocket POD compatible with any Line 6 or standard MIDI controller? A: No, the Pocket POD is not compatible with any Line 6 or standard MIDI foot controller, as it lacks the CAT 5 or MIDI jacks necessary to connect a controller. Q: My Pocket POD is not powering up? 1) The POD was designed to work with standard (mono) 1/4" cables when the cable is inserted into the "input" jack. Check to make sure you are not plugging a TRS cable into your Pocket POD. 2) Check to ensure that batteries are inserted correctly and the springs are lining up. 3) Try using a supported power supply to see if the unit will power. If the unit powers up with an adaptor, try changing the batteries. Q: My Pocket POD reboots when changing power source while connected via USB? A: Changing the power source of your Pocket POD while connected via USB will cause the unit to reboot and its Class Compliant driver to drop its MIDI ports. It is not recommended you change your Pocket POD power source while connected via USB. Q: Where can I get Vyzex software support? A: Line 6 did not develop the Vyzex editor, but you can receive help directly from the manufacturer at the Vyzor support forum.Line 6 Vyzor Support Forum Q: Why is cabinet tuning not working? A: This bug was fixed in the 1.01 Pocket POD update. Please see the instructions on how to update your Pocket POD below. Q: Why do delay changes not call up model default tap tempo? A: This bug was fixed in the 1.01 Pocket POD update. Please see the instructions on how to update your Pocket POD below. Q: Where can I register my Pocket POD? A: You can register your Pocket POD by logging on to www.line6.com. Once logged on, go to the My Account section of the site and then click on the Registered Gear link off to the left hand side. Q: Where is the serial number on my Pocket POD? A: The serial number of your Pocket POD can be found inside the battery-housing compartment behind the top right battery. Q: How do I update the flash memory on my Pocket POD?A: Connect your PocketPod Via USB to your computer, then run the Line 6 Monkey application. If your software is out of date (or you want to reflash for trouble shooting purposes), you will want to update using the following directions. 1) Select the "flash memory" to highlight (in blue), then select "update selection". 2) If Monkey asks you to register your gear, you can select "remind me later". 3) Select "I Accept" for the software agreement and select "continue". 4) Follow the directions, then select "OK" 5) Select "yes" to continue. 6) Wait for the flash memory to update and be installed. 7) Turn your Pocket POD Off, then on, then select "OK". 8) When your unit has been successfully updated Line 6 Monkey will look like this: Q: My update stopped in the middle of the process? A: During the Pocket POD update using the Line 6 Monkey software on a Windows Vista (32-bit and 64-bit) machine, the update may stop and will not continue. This may occur on certain USB ports. This issue can be verified if the progress bar stops partway through the update. Note: If the update does stop, the system will not respond to requests to shutdown the computer, even after force quitting monkey. After disconnecting the Pocket POD, the system can be shutdown. The Pocket POD remains in boot mode after this occurs. Reconnecting to Monkey and re-installing the firmware update does recover the Pocket POD. Please make sure to test the Pocket POD on every USB port on your computer while troubleshooting this issue. Completely remove any USB hubs, even if not in use. PocketPOD Presets.pdf
  25. This thing doesn't come with many and I'm sure there are some talented peeps out there that have made some good ones...Should be easy to share with the editor, right?
×