Search the Community
Showing results for tags 'presets'.
-
Francais Deutsch Q: What is Line 6 Edit? A: Line 6 Edit is a free software application from Line 6 that provides complete editor/librarian features for the following products: POD XT/XTLive/Pro Bass POD XT/XTLive/Pro Vetta II Combo/Head Flextone II/III HD 147 POD 2.0/Pro Note: Vetta II Combo/Head, HD 147, Flextone II/III, POD 2.0/Pro users will need a MIDI interface and cables to use it. We recommend the M-Audio MIDIsport Uno if you do not already have a MIDI to USB device. We recommend installing the MIDI interface drivers directly from the manufacturer's website to ensure you have the latest drivers for your OS. Midisport Uno IMPORTANT: Line 6 Edit is a Java based application, and will run on Macintosh OS X (10.1x-10.5.x) and any Windows OS that can run any version of Java 5 (the latest update is 21). Be aware that using an earlier version of Line 6 Edit will not launch if ANY Java Runtime 6 Environment components are installed. LINE 6 EDIT is available for download here: Software Downloads Line 6 Edit software even translates tones between selected products:[/font][/size] Vetta II will be able to use GuitarPort, PODxt, Flextone III, HD 147 or POD 2.0 Tones. Flextone III and HD 147 will be able to use GuitarPort, PODxt or POD 2.0 Tones. PODxt units will be able to use Flextone III, HD 147, POD 2.0 and, of course, GuitarPort Tones. Q: I'm getting an error message saying "Cannot copy to POD XT Live because it is a POD 2.0 tone". A: The way around this is to use Gearbox (free download from http://line6.com/software/) to open the tone once you transfer it from the POD Pro to the tone folder on your computer. With POD Pro connected, transfer all the tones you want to the tones folder on your computer using Edit. Disconnect POD Pro and connect POD XT. Open Gearbox. Open a POD Pro/2.0 tone in Gearbox. Save the tone to your computer in whatever location you want. Close Gearbox and open Edit Locate tone and transfer into POD XT via Sync button Q: I am getting a Java Error when I try to run Line 6 Edit? A: See the following link for resolution: Resolving Java Errors with Line 6 Edit and Workbench Q: How do I set up my Line 6 device using MIDI to connect with Line 6 Edit? 1) Please ensure that you have the interface's latest drivers installed on your computer. We recommend downloading the drivers directly from the manufacturer's website and installing the drivers BEFORE connecting your USB-MIDI interface. Consult the manufacturer's website for the correct installation and troubleshooting procedures to ensure your drivers are installed correctly. 2) Connect your Line 6 device to the MIDI Interface, making sure the cables are connected correctly. Traditional MIDI connections will have the Line 6 device MIDI IN to interface MIDI OUT, and the Line 6 device MIDI OUT to interface MIDI IN. The MIDIsport Uno will be labeled "to MIDI in" and "to MIDI out". 3) Turn your Line 6 device ON, then open Line 6 Edit. We will use a Vetta II head for these screen examples: 4) If your unit is not being recognized by your computer, select "configure": 5) In the MIDI devices window, select "add": 6) Under the MIDI in port, select your USB to MIDI device: 7) Under the MIDI out port, select your USB to MIDI device: 8) You can leave the device window in "auto detect" or choose the device you plan to use. Once this is completed, select "add": 9) When your device appears in the window, select "OK": 10) Once your device is selected, your computer will import the tones that are currently installed on your device. Do not change any settings or or turn your unit off during the information transfer: 11) Line 6 Edit will now display the tones and bundles currently installed on your computer on the left side of the window, while displaying the tones installed on the Line 6 unit on the right side of the computer. If you need help navigating the features of Line 6 Edit, select the help menu for assistance in connections, backing up your tones, and importing tones. Q: What is Customtone? A: Customtone features a gigantic Line 6-authored library filled with selected tones from the vast treasure trove of GuitarPort Online, including tones matched to many of the greatest classic and new guitarists, bands and songs. Customtone is also a great place to share your tones with other Line 6 end users. You can access Customtone here: Customtone Q: I Get an error message when trying to access the Online Library through Line 6 Edit? A: This is a bug in the Line 6 Edit software that has not been resolved. Please visit the link above to connect to the Customtone website. Line 6 Edit: F.A.Q. Was ist Line 6 Edit? Line 6 Edit ist eine gratis Software von Line 6, die vollständige Bearbeitungs- und Bibliotheksmermale für die folgenden Produkte bietet: POD XT/XTLive/Pro Bass POD XT/XTLive/Pro Vetta II Combo/Head Flextone II/III HD 147 POD 2.0/Pro Achtung, Benutzer des Vetta II Combe/Head, HD 147, Flextone II/III, POD 2.0/Pro brauchen eine MIDI Schnittstelle und Kabel um dieses zu benutzen. Wir empfehlen das M-Audio MIDIsport Uno, sofern Sie noch keinen USB-MIDI Adapter haben. Wir empfehlen außerdem, die Treiber immer von der Webseite des Herstellers zu installieren, so haben Sie immer die neusten Treiber für Ihr Betriebssytsem. Midisport Uno Achtung, Line 6 Edit ist ein auf Java basierendes Programm und wird auf allen Mac OS X (10.1x – 10.5.x) und Windows Betriebssystemen, die Java Version 5 installiert haben (Die neuste Version ist 25) laufen. Achtung, eine frühere Version von Line 6 Edit wird nicht funktionieren wenn Java Runtime 6 Environment Komponenten installiert sind. Line 6 Edit können Sie hier herunterladen. Line 6 Edit kann sogar Töne zwischen verschiedenen Geräten übertragen: Vetta II kann die Töne von GuitarPort, PODxt, Flextone III, HD 147 or POD 2.0 benutzen. Flextone III und HD 147 können die Töne von GuitarPort, PODxt or POD 2.0 benutzen. PODxt können die Töne von Flextone III, HD 147, POD 2.0 und GuitarPort benutzen. Ich bekomme die Fehlermeldung: "Cannot copy to POD XT Live because it is a POD 2.0 tone" Zur Problemlösung brauchen Sie Gearbox (gratis download auf http://line6.com/software/) um die Töne zu öffnen nachdem Sie sie vom POD Pro in den Tones Ordner auf Ihrem Computer kopiert haben. Schließen Sie das POD Pro an. Kopieren Sie all Töne, die Sie benutzen wollen, in den Tones Ordner auf Ihrem Computer anhand von Edit. Trennen Sie nun das POD Pro vom Computer und schließen Sie das POD XT an. Öffnen Sie Gearbox. Öffnen Sie einen POD Pro/2.0 Ton in Gearbox. Speichern Sie den Ton dann auf Ihrem Computer ab. Schließen Sie Gearbox und starten Sie Edit. Suchen Sie den Ton und übertragen Sie ihn auf das POD xt via Sync Knopf. Ich bekomme einen Java Fehler wenn ich Line 6 Edit starte. Benutzen Sie zur Problemlösung folgenden Link: Java Errors with Line 6 Edit and Workbench on Windows Operating Systems Wie konfiguriere ich mein Line 6 Gerät um es via MIDI mit Line 6 Edit zu verbinden? Als erstes sollten Sie überprüfen ob Sie die neuste Version des Treibers der Schnittstelle installiert haben. Wir empfehlen, dass Sie diesen direkt von der Webseite des Herstellers herunterladen und installieren, BEVOR Sie die MIDI-USB Schnittstelle anschließen. Konsultieren Sie die Webseite des Herstellers für die korrekte Installation und Fehlerbehebungen. Verbinden Sie Ihr Line 6 Gerät mit Ihrer MIDI Schnittstelle. Achten Sie darauf, dass die Kabel korrekt eingesteckt sind. Bei standardmäßigen MIDI Schnittstellen muss der MIDI Eingang des Line 6 Gerätes an den MIDI Ausgang des MIDI Gerätes gesteckt werden und der MIDI Ausgang des Line 6 Gerätes and den MIDI Eingang des MIDI Gerätes. Starten Sie Ihr Line 6 Gerät und öffnen Sie Line 6 Edit. Wir benutzen für dieses Beispiel das Vetta II Head: Sollte Ihr Gerät nicht vom Computer erkannt werden, klicken Sie "Configure": Im MIDI Auswahlfenster klicken Sie "Add": Unter MIDI In Port wählen Sie Ihr USB-MIDI Gerät: Unter MIDI Out Port wählen Sie Ihr MIDI-USB Gerät: Das "Device" Menu können Sie dann auf "auto detect" stehen lassen oder das Gerät aussuchen, welches Sie benutzen wollen. Danach klicken Sie auf "Add": Wenn Ihr Gerät dann auftaucht, wählen Sie es aus und klicken Sie "OK": Dann wird Ihr Computer die Töne des Gerätes importieren, die momentan auf dem Gerät installiert sind. Ändern Sie während des Transfers keine Einstellungen und schalten Sie das Gerät nicht ab. Line 6 Edit wird Ihnen nun die Töne und Pakete, die auf Ihrem Compuer installiert sind, links anzeigen und die Töne, die auf Ihrem Line 6 Gerät installiert sind, rechts. Wenn Sie hier Hilfe benötigen klicken Sie bitte das Hilfe Menu an um Hilfestellungen bezüglich Verbindungen, Backup und Import zu bekommen. Was ist Customtone? Customtone ist eine gigantische Bibliothek gefüllt mit ausgewählten Tönen der riesigen GuitarPort Online Liste. Sie enthält viele der größten Klassiker und auch neue Gitarren, Bands und Songs. Customtone ist außderdem ein toller Platz um Töne mit anderen Line 6 Benutzern austauschen zu können. Customtone Ich bekomme eine Fehlermeldung wenn ich versuche auf die Online Bibliothek ("Online Library") via Line 6 Edit zuzugreifen. Dies ist ein Fehler in der Line 6 Edit Software und ist bis jetzt noch nicht behoben worden. Bitte besuchen Sie Customtone über den oben genannten Link anstatt über die Software. F.A.Q.: Line 6 Edit Qu'est-ce que c'est, Line 6 Edit? Line 6 Edit est le logiciel gratuit de Line 6 qui fournisse des fonctionnalités complètes d'édition et bibliothèque pour les produits suivants: POD XT/XTLive/Pro Bass POD XT/XTLive/Pro Vetta II Combo/Head Flextone II/III HD 147 POD 2.0/Pro Attention, les utilisateurs Vetta II Combo/Head, HD 147, Flextone II/III, POD 2.0/Pro ont besoin d'une interface MIDI et câbles pour l'utilisation. Nous recommandons me M-Audio MIDIsport Uno si vous n'avez pas encore une interface MIDI-USB. Nous recommandons d'installer les pilotes d'interface directement du site web du fabricant pour avoir la dernière version pour votre système d'exploitation. Midisport Uno Important: Line 6 Edit est un logiciel basé sur Java et fonctionne sur Mac OS X (10.1x-10.5.x) et tous les systèmes d'exploitation Windows qui peuvent exécuter Java 5 (La dernière version sera 25). Les versions anciennes de Line 6 Edit ne fonctionnent pas si Java Runtime 6 Environment est installé. Line 6 Edit est disponible: Téléchargements de logiciels. Line 6 Edit peut transférer des tons entre ces produits: Vetta II peut utiliser des sons de GuitarPort, PODxt, Flextone III, HD 147 ou POD 2.0. Flextone II et HD 147 peuvent utiliser des tons de GuitarPort, PODxt et POD 2.0. PODxt peut utiliser les sons de Flextone III, HD 147, POD 2.0 et GuitarPort. Je reçois le message "Cannot copy to POD XT Live because it is a POD 2.0 tone". Pour résoudre ce problème, vous devez utiliser Gearbox (Téléchargement gratuit de http://fr.line6.com/software/) pour ouvrir le son si vous l'avez transféré du POD Pro au dossier des sons sur votre ordinateur. Si POD Pro est connecté, transférez tous les sons, que vous voulez, au dossier des sons sur votre ordinateur en utilisant Edit. Déconnectez POD Pro et connectez POD XT. Ouvrez Gearbox. Ouvrez un ton POD Pro/2.0 en Gearbox. Enregistrez le son sur votre ordinateur. Fermez Gearbox et ouvrez Edit. Localisez le son et transférez-le sur votre POD XT via le bouton Sync. Je reçois une erreur Java si j'essaye de lancer Line 6 Edit. Veuillez utiliser le lien suivant pour résoudre ce problème: Java Errors with Line 6 Edit and Workbench on Windows Operating Systems Comment est-ce que je peux configurer mes appareils Line 6 MIDI pour l'utilisation avec Line 6 Edit? Installez les dernières pilotes de l'interface sur votre ordinateur. Nous recommandons de les télécharger directement du site web du fabricant et les installer AVANT que vous connectez l'interface USB-MIDI. Consultez le site web du fabricant pour l'installation correcte et pour résoudre des problèmes. Connectez votre appareil Line 6 à l'interface MIDI. Les câbles doivent être connectés correctement. Les connexions MIDI traditionnels seront: appareil Line 6 MIDI IN à interface MIDI OUT et l'appareil Line 6 MIDI OUT à interface MIDI IN. Le MIDI sport Uno sera étiqueté "to MIDI on" et "to MIDI out". Allumez votre appareil Line 6 et ouvrez Line 6 Edit. Nous utilisons Vetta II Head pour cet exemple: Si l'appareil n'est pas reconnu par le système, cliquez "Configure". Dans la fenêtre des appareils MIDI, cliquez "Add". Sous "MIDI In Port", sélectez votre appareil USB-MIDI: Sous "MIDI Out Port", sélectez votre appareil USB-MIDI: Vous pouvez laisser le menu "Device" sur "Auto Detect" ou choisissez l'appareil vous voulez utiliser. Cliquez "Add". Si votre appareil apparait, sélectez le et cliquez "OK". Si l'ordinateur reconnait l'appareil, il importe les sons qui sont installés sur l'appareil. Ne changez rien out éteignez l'appareil pendant ce transfert des informations. Line 6 Edit vous montre les sons et paquets installés sur l'ordinateur sur le côté gauche de la fenêtre et les tons installés sur l'appareil sur le côté droite de la fenêtre. Si vous avez besoin d'aide avec la navigation, cliquez le menu d'aide pour les informations de la connexion, sauvegarde et import. Qu'est-ce que c'est, Customtone? Customtone figure une bibliothèque gigantesque des sons sélectés de l'immense liste de GuitarPort Online, cette liste inclus des sons des plus grands classiques mais aussi des nouvelles guitares, groupes et chansons. Customtone est aussi un endroit idéal pour partager vos tons avec autres utilisateurs Line 6. Customtone Je reçois un message erreur si j'essaye d'accéder la bibliothèque en ligne via Line 6 Edit. C'est un bug dans le logiciel Line 6 Edit qui n'a pas encore eu résous. Veuillez utiliser le lien au-dessus.
-
bit.ly/AmpCabPack These are (now 31) very simple Amp+Cab presets for any Helix device with amp models, meant to be a “jumping off” point for bigger presets. Every preset contains an Amp+Cab block, with a few of the amp’s parameters assigned to Footswitch 1 for a different sound, kind of a Clean/Dirty channel thing. There are two folders, one for Stomp and one for the Floor/LT/Rack/Plugin (the later named “Full”). These presets were programmed with an HX Stomp playing though Yamaha HS5 studio monitors in a treated room, crossreferenced with a QSC K8.2. I’ve tweaked each preset using 4 guitars so they’ll hopefully sound good with whatever you’re plugging in with minimal tweaks. The 4 guitars I used are: a vanilla Strat with a MIJ Body with MIM electronics and a Warmoth neck, a Strat with 500k pots, a SD Hot Rails in the bridge position and noiseless single coils (bright sound) — a stock PRS S2 Standard 24 (warm sound) — and an Ibanez Iron Label S 7 string with Dimarzio Ionizers (high output). Yes, I ran a 7 String through a Fender Champ model and it was FUN! Leave some feedback or questions if you'd like. Thanks and enjoy, Alex Kenivel PS this is the third revision of this pack. More presets will be added so watch this space for more.
-
Buenas A tod@a, por favor necesito saber que pasa con mi Pod Xt Live, Últimamente se baja se sube o se queda sin volumen cuando estoy tocando con el ya sea al momento de prenderlo o a veces tarda unos minutos para presentar el problema. Aparecen los controles del amplificador en la pantalla como si fuera a editarlos acompañados de el signo * al lado superior izquierdo. Esto esta bastante incomodo ya que al estar practicando a menudo sucede este problema. Ya lo actualice y nada sigue lo mismo. Gracias.
-
I finally found a great deal on a (not) scratch n dent V-Standard at SW, and after 2.2 days I'm starting to get blown away. Let me back up. I entered the modeling realm with an HD500 when they were fresh (what, 2010?), thinking that I'd have more capability than the Spider Valve MkI that amazed me. First thing I noticed on the POD was that all the stock presets sucked. Playing at very low volume, I had to develop my own, which relied on a fair bit more gain than I'd normally go for in order to achieve any kind of crunch. I moved from FRFR to DT amps, but still, always kinda had more gain than I wanted (except when I went totally clean with the lovely Twin model). I picked up a Variax 600 and finally reached "dream rig" status, but really only liked the Strat models, Tele neck, and the Rick bridge. The alt tunings seemed kinda crappy too. Most of the other electric models were just too loud--much louder and with more gain than my real guitars with hot pups. When I first tried my new V-Standard, it was looking like more of the same (except usable mags). So I wondered, how do I get away from my presets with too much gain and into presets that work for my Variax? In an epiphany of sorts, I started trying out all those presets in my HD500 that sucked, and guess what? NO MO SUCKY! They're amazing, for the most part. Also, to my surprise, they all have variax settings already. So all I had to do was plug my dream rig in, using an ethernet cable and the digital L-6 Link, and now folks, I hardly have to tweak, I can just play my heart out! Turns out those patches were very well crafted using Variaxes of some kind, and so far about 2/3 are keepers! Has anyone else noticed this as well, or am I the first to stumble on this total treasure chest? The magnetic pickups are pretty sweet too! But the other thing I'm really thrilling over is the neck on the Variax Standard. I was afraid that something this flat, this thin, and with medium frets might not work for my aging knuckles, but I gotta tell you that even with 10's at concert pitch this thing is a joy for my hand! It's the most comfortable neck I've felt since the Japanese Variax 700 I've been wishing I'd have bought--and that's saying a lot. I do have questions: Is the light on the alt tuning knob supposed to be only momentary (unless you go to the "model" position)? I wish the thing would stay lit in mag mode so I could dial up the tuning I want without activating all those other tunings in between. Does anybody know how hard it would be to change pick guards? I'm thinking white would look very sweet with my sunburst brown... THANKS!!! Mike
-
The spider remote has 4 user banks. How do I save a preset to one of those banks. Thank you.
-
I'm new to Helix, having used it for about 3 weeks. I have had no history of working with modeling equipment and software. I've gone through most of Jason Sadites' tutorials - very instructive and helpful. I am interested in developing some presets for jazz guitars, particularly hollow bodies such as the D'Angelico Excel EXL1. I'm looking for a clean, round sound. I've attached a preset I made with dual amps and cabs, hopefully to give more depth to the tone. I'm using a Roland 40 amp, but plugging the Helix into the effects jack on the back; this appears to bypass the preamp. The tone was created for the D'Angelico. I applied some compression to the lows and highs of both modeled amps to decrease muddiness and too bright tonalities. I used EQs to specifically target frequencies which feed back on the guitar. Any thoughts/assistance in the elements and/or layout of the preset would be much appreciated. Randall RBS JC40 EXL1b.hlx
-
As I run my Line 6 UX 2 today, all the presets were gone. I refreshed the presets in the tab and after it it was empty. Newest software has been downloaded but this has not fixed my problem.
-
Hi, Anyone use Snapshots and Non Snapshot presets? Current snapshots doesn't give me enough space for additional foot switchable effects.
-
Hi, I am new to using digital equipment (analog guy) and I replaced my pedal board for an HX Effects. Amp channel switching works fine in preset mode. However, if I want to switch to another preset, there is this short time of no sound, to load the other preset. Here comes in the snapshots, so that problem is solved. But now i cannot use amp channel switching in snapshot mode. Is there solutions/workaround to be able to switch between channels AND without that short period of nothing to load another preset or sound? I hope somebody has an answer to this.
-
Hi! hoping to share some presets for the HX effects and try some from others. Is their a good place to find / download these as well as IRs. Thanks
-
I'm loving my Helix for live use and recording. To bring this powerful unit over the top I think LINE 6 should petition/hire Pete Thorn to create and share his presets for the HELIX. I recently watched a Pete Thorn video where he set up a Helix to act as a backup should his amp setup run into technical issues. Given this musician's talent for creating tones, I would imagine these to be VERY realistic sounding patches. In addition, I participated in a chat where Pete himself said he would be game for creating something for Line 6 :-) What do you think Line 6/Helix users?
- 8 replies
-
- 1
-
-
- pete thorn
- professional presets
- (and 1 more)
-
Hello all, I have an Amplifi 150. When the amp is not connected to a bluetooth phone or tablet, it has 4 "favorite" presets accessible trough the TONE button. To which bank on the remote app do these presets correspond? Bank 1 or the user bank 25 at the end of the list? Thanks.
-
I just bought a used Line 6 Spider 3 HD150 head from Guitar Center. I powered it up and started to play (through headphones as I do not yet have the cab for it) and it worked fine for about 30 seconds. I looked down at my FBX longboard and noticed that it had switched banks by itself from Bank 2 to Bank 3. I switched it back to Bank 2 and the preset channel I was using, then the sound cut out. After 2 seconds it came back. Then it started doing it over and over. I noticed it was actually powering off and on repeatedly. Any advice on steps I should take to correct the issue? I have 45 days to return it if I can't fix it. Thanks in advance.
-
My PODHD500 custom presets were deleted once I synced my HD500 with HD500 Edit. Do I have to start over or is there a way to get them back? -
Greetings everyone and Happy Holidays! Today I released a bunch of Periphery Tones on my website and I'm also running a Holiday offer for these! https://www.sbtones.com/product-category/helix/?filter_artist=periphery Here are some samples for my tones: And here are some reviews from my customers: https://www.sbtones.com/reviews/ Let me know what you think! I worked very hard for these! Kind regards, George -SB Tones
-
Okay, I can't seem to find an answer to this online. All of a sudden, my global settings aren’t saving. I had it set to snap/stomp mode, and 10 switches, but whenever I power it on now, it goes to preset mode and doesn't save the mode I previously set it to. Also, my Helix used to power up on the same preset it was on when powered down, now it just goes to 1A Factory Preset. The only thing I changed was, I was messing with the midi settings the other night, trying to get a midi foot controller I have, to talk to and control the Helix, so I may have changed a midi channel or preference, but that's it.
-
This thing doesn't come with many and I'm sure there are some talented peeps out there that have made some good ones...Should be easy to share with the editor, right?
-
Hi Guys Im having problems using Helix to control MainStage. I have set up Helix to have a preset for each song in my set, I want MainStage to have a playback and metronome click for each preset. I have successfully got Helix and MS synced up so when I change presets it changes patches on MS using an instant command in command centre. I also set up 2 switches on my Helix for each patch, one to turn on the metronome, the other to turn on a playback in MS. That works fine. However when I change presets using the Helix it also immediately fires either the metronome or the playback neither of which I want to happen. Ive tried all sort of combinations in MS but can't seem to stop it happening. Im no expert in midi so maybe my commands are wrong - Im using CC toggle commands for the playback and metronome but have no idea what CC# means so have tried different numbers which does nothing. Then I read on this forum that when Helix sends PC commands it also send all the other commands as well so Im wondering if this is the issue. Any help on this would be appreciated
-
Hi, I'm still getting to grips with my Helix after a few months, so this might not be the right question! I mostly use my Helix with Headphones once the kids are in bed. I've got an entry level set of Audio-Technica ATH-M40X Headphones, which seem to have a reasonably flat response compared to my old entry level Sennheisers. I also have a pair of Mackie 4" monitors. I also use both for my PC. In terms of setup, I'm sending the Helix signal to the Speakers/Headphones via the 1/4" out, through a small Behringer mixer. I'm also mixing the PC sound through the mixer. This way I can jam to backing tracks on my PC, which is 90% of my usage. I've got a bunch of presets including paid for ones from Glenn DeLaune, Fremen, Marco Fanton and Ben Vesco (I recommend them all btw!) Some sound great on Headphones, others just don't work as well. I appreciate that headphones aren't moving as much air as a speaker, but interestingly, most sound better when I connect the headphones to the Headphone Out on the Helix. Does anyone have any suggestions to experiment with, in the preset EQ/settings? Thanks
-
Sorry for the clickbait-title but it is true! Never understood why the slots are so restricted and there is no playground-area which could be used to try custom models. https://line6.ideascale.com/a/dtd/An-area-to-store-unused-presets-within-Workbench-HD/902175-23508 Please give your vote to this idea :) -
I'm running an FX100 paired to an iPad and generally enjoy most of the sounds and functionality it provides. The one nagging thing that I'd like an answer to is this; When I work from the iPad, go to "my tones" and select one, the tone obviously changes but the FX100 displays the old patch and won't change to what I've selected. Anyone have a fix for this? Much appreciated.
-
Has anyone else noticed any strange behaviours with writing tones to my tones? I am prompting the fire hawk fx to "save to my tones" which I would assume would over write any pre-existing tones (compared to save to my tones as) with that exact same title - however it often creates duplicates or sometimes three or four variations. Anyone notice this? I feel like if there's any slight difference in the patch - even if you use save to my tones it will create another version
-
Hi totally new here I've been searching around and can't find what I think should be a simple answer in plan english. I used to have an M13 where in latch mode you can load like 12 completely different presets at once. I am looking into buying a 500X but it looks like you can only have 4 presets loaded at once with another four "assigned" pedals for the top row? Is that right? It seems limiting?
-
Hola,puede alguien decirme como se meten los presets descargados,
-
Hi all, I just bought a Firehawk FX and had a question about changing tones and banks on the iOS app vs on the pedal itself. When I change tones on the pedal, the app will reflect the change and highlight the active tone. However, when I change them through the app, the sound will change, but the pedal does not reflect it. For example, say I have the pedal set to bank 1, tone A and switch A is illuminated . Then I scroll down and choose tone D from bank 4 in the app. The sound will change, and the pedal's LED display shows the correct name, but switch A is still illuminated. If I then step on any of the other footswitches, A-D, the tones default back to bank 1, or whichever bank the pedal was last set to through the switches. So I effectively can't change the bank in the Firehawk app, and then choose a preset tone from that bank with the footswitches. Is this normal?
