Search the Community
Showing results for tags 'removal'.
How to uninstall drivers from your Windows 7, 8, or 10 machine Note: You must have administrator privileges to uninstall a device or driver package by using Device Manager. To uninstall all drivers for Line 6 gear by using Device Manager, follow these steps: 1. Open Control Panel, click Hardware and Sound, and then click Device Manager. 2. Expand the node that represents the type of device that you want to uninstall, right-click the device entry, and click Uninstall. 3. On the Confirm Device Removal dialog box, click the box that says "Delete the driver software for this device" and then click OK 4. When the uninstall process is complete, unplug the devices USB connection. 5. Without closing the Device Manager screen plug your USB device back in and wait to see if Windows assigns an older driver to the device. You will know if Windows finds another driver to assign if Device Manager recognizes the device If it assigns another driver, please repeat the steps. 6. You will know if another driver doesn't get assigned when Device Manager recognizes the Line 6 gear as 'Unknown Device'. 7. Once you've removed all the drivers and Windows does not recognize the device, unplug the unit once and re install the latest Line 6 driver from the website. http://line6.com/software/ 8. Plug it back in and wait for Windows to assign the newly installed driver.
I formatted my old PCs several times, but now i authorized my new PC with licence manager then when i look my devices it shows all the old computers i had and formatted each at least 3 times and licence manager says "You currently are using 8 out of 10 lifetime devices". I don't use my older PCs and they are formatted 3 times at least. I want removal of my old devices. Please help me for solution! Thank you
Hey, I sure could use some help on this. I have a Spider IV 75 watt amp. The amp got soup poured into the brain via the screws that attach the handles to the top of the case. I need to remove the brain from the cabinet and clean it out and make sure there is nothing connecting up to something else. I have contacted Tech Support and they told me to remove the screws from the top and push it backwards front to back., Only one problem. The brain is attached to a thick metal plate that has 5 RED screw heads that I see and that plate is wedged into the amp's box top and bottom. There is NO way to remove those screws so the plate no longer stops the brain from sliding backwards and out of the case. AND the only way that I see is to actually split open the case at the top where the top and side are Jigsawed into one another. Also the Speaker cover cloth is mounted to a board and that board is also part of the problem in that it jigsaws into the bottom of the brain and is in between the plate and the brain being removed from front to back., Has anyone removed this before? Is there any trick of device that I am not aware of to get the brain out of the case? The way this looks is that the brain was bolted to this metal plate that the controls stick through and that metal plate must be removed from the sides of the case before that brain is going anywhere. So, that means splitting open the case at the top so that I can actually push the entire board that the brain is attached to via that plate and slide the top out of the jigsaw'd top and sides woods. Any help would be appreciated. THANK you,firstname.lastname@example.org