Search the Community
Showing results for tags 'snapshots'.
-
Hello Folks, i just can't figure it out how to change snapshots using midi messages with protools!!!! Any Help? Thanks!
-
Trying to change the Helix from stomp mode to snapshot mode. However, changing the "Preset Mode Switches" mode doesn't change the button modes. They continue in stomp mode. All the other button changes are reflected as you change the value (like Up/down or Stomp Mode Switches). Is this a bug? Seems like I am missing something.
-
I want to set a compressor gain at 4.0 on Snapshot 1 and a gain of 6.0 on snapshot 2. It doesn't work at all: all the snapshots recall only the same setting, the last one... The snapshots seem only capable of recalling if a block is off or on. Is it normal? I guess not, it is quite useless if the snapshots cannot recall the different parameters settings inside a block from snapshot to snapshot. What could I've been doing wrong? Helix V2.71
-
I've seen in multiple threads and the manual that you should be able to change the variax model per snapshot; however, it only seems to allow it globally or per preset. Using "HX edit 2.6" (in the first image) you can see that there is an option for snapshot clicking on the camera in the upper right. But in the actual selection area (second image, right side), you only have the global and preset option, nothing on snapshots. I have a JTV59 I think it is, and am using the cat5 cable between it and the helix. Although this snapshot option should be visible independent of the variax. I didn't see anything in the release notes for HX edit that addresses it so I doubt upgrading will fix it. Has anyone else run into this or is there a work around? Thanks, Bobby
-
I think it would be cool if there were a global setting that allowed for six snapshots. With this setting enabled, the mode button would be used as a three way toggle between preset, pedal board, and snapshot modes. Update 2.80?
- 1 reply
-
- hx effects
- snapshots
-
(and 4 more)
Tagged with:
-
Hi, Anyone use Snapshots and Non Snapshot presets? Current snapshots doesn't give me enough space for additional foot switchable effects.
- 15 replies
-
I have two MIDI foot controller devices which have FIXED MIDI CC numbers for each stomp. Namely ActitioN and the IK BlueBoard. https://line6.ideascale.com/a/dtd/HELIX-NATIVE-Snapshot-Control-support-MIDI-pedals-with-FIXED-CC/938764-23508?submitted=1#idea-tab-comments Trouble is the SNAPSHOTS feature in HM 2.6 uses a FIXED CC value - CC#69 follows by a Value 0-7 for each snapshot. So say i want to use 4 stomps for SNAPSHOT 1-4 - my foot controller sends four DIFFERENT FIXED CC values ! I use Ableton - so initially had a look for MAX4LIVE devices that can remap one CC to another - but found none that could remap the different CC values ( 76-79 in my case ) to 69 - while at the same time setting VALUE to 0 when I send 76, 1 for 77, 2 for 78 and 3 for 79. So my attempt to use MAX4LIVE MIDI conversion add ons failed. What we really need is a way in HN to either have a LEARN function so to change snapshots we can use the CC values of our choice ( and ignore value ) OR.... have a built-in CC remapping facility page where HN automatically transforms incoming ( different ) CC values to 69 and the appropriate value. https://line6.ideascale.com/a/dtd/HELIX-NATIVE-Snapshot-Control-support-MIDI-pedals-with-FIXED-CC/938764-23508?submitted=1#idea-tab-comments
-
Hi, I am new to using digital equipment (analog guy) and I replaced my pedal board for an HX Effects. Amp channel switching works fine in preset mode. However, if I want to switch to another preset, there is this short time of no sound, to load the other preset. Here comes in the snapshots, so that problem is solved. But now i cannot use amp channel switching in snapshot mode. Is there solutions/workaround to be able to switch between channels AND without that short period of nothing to load another preset or sound? I hope somebody has an answer to this.
-
After downloading a patch, with snapshots, and copying to a preset in the Helix - how can you tell how many snapshots with content there are? And, how does one go about tweaking the parameters? Just got the unit and am flailing my way through this thing. Thanks for any help you provide.......!
-
Hi there! I've made some snapshots from presets, but the weird thing is that there's a significative lag when I change between them (video attached). Am I missing anything? Even changing between presets the lag is less, and snapshots are supposed to be even faster, right? I'm connecting the HX straight to the amp. I'm pretty shure there's something I'm not considering. Here's the video:
-
Okay, I can't seem to find an answer to this online. All of a sudden, my global settings aren’t saving. I had it set to snap/stomp mode, and 10 switches, but whenever I power it on now, it goes to preset mode and doesn't save the mode I previously set it to. Also, my Helix used to power up on the same preset it was on when powered down, now it just goes to 1A Factory Preset. The only thing I changed was, I was messing with the midi settings the other night, trying to get a midi foot controller I have, to talk to and control the Helix, so I may have changed a midi channel or preference, but that's it.
-
hi - Ive been using my HX effect for a few weeks now - its very good - I really like it. Would love to see one thing though. 6 snapshots. So you have three pages. toggled with the mode button. first is preset selection - second is snapshot selection - all 6 - and third is pedal/stomp mode. I think this would be much better. other wise love it!
-
Hi, I can't figure out how to save snapshots in LT.No videos on it & can't figure out the manual.It looks like LT is a bit different from the Helix.Any videos exclusively for LT snapshot saving? Thanks
-
Just getting to know some Helix ! I would like to know if the Snap Shot function can only handle effect on/off? Can I tweak each effect or amp for each snap shot ?The reason I ask is to maintain a volume balance between each snap shot .
-
Hello guys! I am using JSON viewer to view the effects blocks and setting to "import" my old Helix and Helix LT presets into HX Effects unit. I remember in Helix floorboard that I had many parameters in the same effect block changed by a snapshot. Example: Changing BASS, DRIVE and LEVEL for solo in the AMP block. Now I see that I can only use one parameter per block to be used with the snapshot feature. Examplo: DRIVE BLOCK, I only can set one parameter, in the 808, I can only assign GAIN or TONE or LEVEL, but not 2 or 3 at the same time. Is this a hardware limit? Or am I doing something wrong? Thanks in advance! Leo
-
Hi All. First post here. Have read lots of good stuff on here since buying my HX a month or so ago. I do love it and don't miss my Boss ES-5 setup with Mobius and other assorted pedals at all! I'm pretty good with MIDI (from my 90's days when all my synths/effects were outboard!) but have some observations and thoughts on MIDI instant command/Snapshot/Preset interactions that I'd be interested in feedback on. To my mind, it should (logically) work thus (and I'm only dealing with PC messages here...): In Preset mode, you set up your MIDI messages using the Instants in the Command Centre. These would be the default MIDI messages for the whole preset. Within a snapshot, you should be able to change the instant, or have it default to the ‘Preset’ one set up above either by having no instant at all, or a "preset default" option. I use Midi (for my H9 and Elektron Analog Drive) and snapshots (I use one preset per song and the snapshots for the different sounds within a song) and it doesn’t seem to work in a consistent way for me. For instance : I set up one snapshot as a default for a song and copy the snapshot to make changes for different sections. The Instants do not copy across. If I remove an instant from a snapshot (as the snapshot doesn't need to change any MIDI values) the Instant MIDI command is removed totally across all snapshots and the preset. I'm quite sure this is just me not fully understanding how Instants and Snapshots interact! Anyone got any definitive answers on how Snapshot Instant’s work. I’ve fudged my way through (checking each snapshot’s Instant values) and have the unit setup as I want now but would like to now the official line on how it is supposed to work for future programming. Ta, David.
- 5 replies
-
- midi
- hx effects
-
(and 2 more)
Tagged with:
-
Hi all, can the HX FX send program changes to other midi devices with snapshots?
-
So.. It's been awhile since i've used Snapshots.. I'd say quite a few months. I've been recording alot lately. Well, i'm having a hard time actually getting them to work for some reason.. It's a little hard to describe so i'll do the best I can. I don't know if I hit something by accident, but on all my presets that i've made, I typically use the "Stomp/Snap" setting. Now... it's still set to that setting, however the four bottom switches are just inactive.. There's no lights indicating that anything can be changed. I can no longer switch between snapshots while performing. The top switches work totally fine for stompbox purposes.. But the bottom ones aren't doing anything. The bottom ones however do work normally if I set them to stomps, just not for snaps. Any help would be awesome, I can't figure this one out.
-
I am experiencing strange behavior when I attempt to work with snapshots. I have followed the manual but it's not doing what the manual says it should. I press both preset button simultaneously, and it shows all four snapshots blinking... Then if I click a snapshot, it kicks me back to the presets. I've attached a movie to show what's going on... I have updated to the latest firmware 2.54.0. Any help would be appreciated. Snapshots-HX-not-working-1.mov Maybe I'm missing something?
- 2 replies
-
- snapshots
- not working
-
(and 2 more)
Tagged with:
-
Hi, I have a preset with snapshots using 1 amp (the cartographer which is great). Obviously because of using snapshots I have different parameters on the amp per snapshots. When I switch from one snapshot to another there is a loud pop noise. Is there a way to avoid that noise. I tried to use an eq pedal to regulate volume and keep the volume on the amp channel equal but this did not solve the issue. I also tried to put the amp in another path but this did not help neither.
-
Hi there, I just updated Native, and I'm really excited about using snapshots. I just can't figure out how to store/save them? Any help? Thanks!
-
Has anyone had issues/experience with snapshots AND using HELIX to control external gear via MIDI? I use helix to run Ableton Live via MIDI notes that are assigned to (momentary)footswitches in HELIX. This has worked perfectly in STOMP mode as long as I've had my HELIX, but I recently started working with snapshots and LOVE the flexibility. Here's the problem I'm having: It seems that my HELIX is learning which footswitches I'm stomping to control Ableton, so when I recall a snapshot, the switches I have stomped are ENGAGED, and the note value of each switch changes to C -1. I've tried using MIDI CC's instead of notes with no success either. If anyone has any input or help, I'd really appreciate it. Thanks!
-
Hi can someone help me? I'm using the line 6 helix rack with the midi moose controller. I've managed to create the snapshots I want but I can't seem to assign them to the midi moose controller all it continues to do is change presets instead of snapshots which I don't like because of the delay between presets any advice would be greatly appreciated thanks! Mike
-
This is probably another thing I'm just finding out that everybody else already knows, but it might address a concern I think I've seen on here before. On a Snapshot change, Helix only sends a MIDI CC message if the CC value in the new Snapshot is different from the current Snapshot. There may be instances in which you want an On (CC=0) or Off (CC=127) message to send regardless of whether the new value is different. I ran into this because I didn't want the natural behavior while I was editing the preset. When I changed a 0 to 127 and changed Snapshots to test it, I couldn't tell if I'd gotten it right, or if it just did't send a message at all. This is probably pretty obvious to most, but the solution I had was to realize that Off is actually 0-63 and On is 64-127 and Helix doesn't know you are using them as O/Off messages, just that 0 and 1 are different messages. So I used 0-7 for Off and 120-127 for On and the message was sent every time. Can anyone spot any downsides to this I'm not seeing? Any uses other than during editing Snapshots?
-
I've inadvertently gotten stuck and can't figure out how to get back. When I hit the bank up and down buttons, it's scrolling through snapshots - the number in my snapshot camera icon advances or declines. I've not intentionally created any snapshots yet - How do I exit this mode and get the bank up and down buttons to scroll through the patch banks once again? Thank you