Search the Community
Showing results for tags 'snapshots'.
-
Hi, I can't figure out how to save snapshots in LT.No videos on it & can't figure out the manual.It looks like LT is a bit different from the Helix.Any videos exclusively for LT snapshot saving? Thanks
-
HELP PLEASE! Does anyone know if it is possibile to make helix remembering the last snapshot I used within a preset when I come back from another preset??? THANKS
-
Is there a way to change the default behavior of settings in a block when the snapshots are changed? What I'd like to see is the settings to be snapshot-specific without having to indicate that explicitly. As in - all settings are snapshot-specific, except those you mark as the "global" ones. Basically a behavior reverse to the one that is the default. Is there any way to do that?
-
Can I copy a tone into a snapshot? So if it on another patch can I copy it into a particular snapshot? If so, how can this be done? Thanks
-
I have my Helix set up to show the songs on the top row and the snapshots for each song below. So I can have a song chosen and below I can have one snapshot as the intro, One as the verse, One as the chorus. etc. My problem is that when I change the 2nd snapshot it changes the tone universally. So each snapshot changes to the new sounds. What I am trying to do is make every snapshot a different part. Is there something that I have set incorrectly? Thanks
-
Snapshots do not store or recall the EXP 1 and 2 assignment. So when you engage the Toe Switch, the onboard pedal switches between EXP 1 and EXP 2 assignment, but Snapshots do not account for that since they only store the Wah or Volume blocks On/Off bypass state. There is a workaround however. You can connect a pedal to Helix's EXP 2 jack (or even just a dummy 1/4 plug in the jack) that forces the onboard pedal to remain always as EXP 1, thus it won't change and the Snapshots are recalled as expected.
-
Trying to change the Helix from stomp mode to snapshot mode. However, changing the "Preset Mode Switches" mode doesn't change the button modes. They continue in stomp mode. All the other button changes are reflected as you change the value (like Up/down or Stomp Mode Switches). Is this a bug? Seems like I am missing something.
-
I want to set a compressor gain at 4.0 on Snapshot 1 and a gain of 6.0 on snapshot 2. It doesn't work at all: all the snapshots recall only the same setting, the last one... The snapshots seem only capable of recalling if a block is off or on. Is it normal? I guess not, it is quite useless if the snapshots cannot recall the different parameters settings inside a block from snapshot to snapshot. What could I've been doing wrong? Helix V2.71
-
I've seen in multiple threads and the manual that you should be able to change the variax model per snapshot; however, it only seems to allow it globally or per preset. Using "HX edit 2.6" (in the first image) you can see that there is an option for snapshot clicking on the camera in the upper right. But in the actual selection area (second image, right side), you only have the global and preset option, nothing on snapshots. I have a JTV59 I think it is, and am using the cat5 cable between it and the helix. Although this snapshot option should be visible independent of the variax. I didn't see anything in the release notes for HX edit that addresses it so I doubt upgrading will fix it. Has anyone else run into this or is there a work around? Thanks, Bobby
-
I think it would be cool if there were a global setting that allowed for six snapshots. With this setting enabled, the mode button would be used as a three way toggle between preset, pedal board, and snapshot modes. Update 2.80?
-
Hi, Anyone use Snapshots and Non Snapshot presets? Current snapshots doesn't give me enough space for additional foot switchable effects.
-
Hi, I am new to using digital equipment (analog guy) and I replaced my pedal board for an HX Effects. Amp channel switching works fine in preset mode. However, if I want to switch to another preset, there is this short time of no sound, to load the other preset. Here comes in the snapshots, so that problem is solved. But now i cannot use amp channel switching in snapshot mode. Is there solutions/workaround to be able to switch between channels AND without that short period of nothing to load another preset or sound? I hope somebody has an answer to this.
-
I have two MIDI foot controller devices which have FIXED MIDI CC numbers for each stomp. Namely ActitioN and the IK BlueBoard. https://line6.ideascale.com/a/dtd/HELIX-NATIVE-Snapshot-Control-support-MIDI-pedals-with-FIXED-CC/938764-23508?submitted=1#idea-tab-comments Trouble is the SNAPSHOTS feature in HM 2.6 uses a FIXED CC value - CC#69 follows by a Value 0-7 for each snapshot. So say i want to use 4 stomps for SNAPSHOT 1-4 - my foot controller sends four DIFFERENT FIXED CC values ! I use Ableton - so initially had a look for MAX4LIVE devices that can remap one CC to another - but found none that could remap the different CC values ( 76-79 in my case ) to 69 - while at the same time setting VALUE to 0 when I send 76, 1 for 77, 2 for 78 and 3 for 79. So my attempt to use MAX4LIVE MIDI conversion add ons failed. What we really need is a way in HN to either have a LEARN function so to change snapshots we can use the CC values of our choice ( and ignore value ) OR.... have a built-in CC remapping facility page where HN automatically transforms incoming ( different ) CC values to 69 and the appropriate value. https://line6.ideascale.com/a/dtd/HELIX-NATIVE-Snapshot-Control-support-MIDI-pedals-with-FIXED-CC/938764-23508?submitted=1#idea-tab-comments -
After downloading a patch, with snapshots, and copying to a preset in the Helix - how can you tell how many snapshots with content there are? And, how does one go about tweaking the parameters? Just got the unit and am flailing my way through this thing. Thanks for any help you provide.......!
-
Hi there! I've made some snapshots from presets, but the weird thing is that there's a significative lag when I change between them (video attached). Am I missing anything? Even changing between presets the lag is less, and snapshots are supposed to be even faster, right? I'm connecting the HX straight to the amp. I'm pretty shure there's something I'm not considering. Here's the video:
-
Okay, I can't seem to find an answer to this online. All of a sudden, my global settings aren’t saving. I had it set to snap/stomp mode, and 10 switches, but whenever I power it on now, it goes to preset mode and doesn't save the mode I previously set it to. Also, my Helix used to power up on the same preset it was on when powered down, now it just goes to 1A Factory Preset. The only thing I changed was, I was messing with the midi settings the other night, trying to get a midi foot controller I have, to talk to and control the Helix, so I may have changed a midi channel or preference, but that's it.
-
hi - Ive been using my HX effect for a few weeks now - its very good - I really like it. Would love to see one thing though. 6 snapshots. So you have three pages. toggled with the mode button. first is preset selection - second is snapshot selection - all 6 - and third is pedal/stomp mode. I think this would be much better. other wise love it!
-
Just getting to know some Helix ! I would like to know if the Snap Shot function can only handle effect on/off? Can I tweak each effect or amp for each snap shot ?The reason I ask is to maintain a volume balance between each snap shot .
-
Hello guys! I am using JSON viewer to view the effects blocks and setting to "import" my old Helix and Helix LT presets into HX Effects unit. I remember in Helix floorboard that I had many parameters in the same effect block changed by a snapshot. Example: Changing BASS, DRIVE and LEVEL for solo in the AMP block. Now I see that I can only use one parameter per block to be used with the snapshot feature. Examplo: DRIVE BLOCK, I only can set one parameter, in the 808, I can only assign GAIN or TONE or LEVEL, but not 2 or 3 at the same time. Is this a hardware limit? Or am I doing something wrong? Thanks in advance! Leo
-
Hi all, can the HX FX send program changes to other midi devices with snapshots?
-
So.. It's been awhile since i've used Snapshots.. I'd say quite a few months. I've been recording alot lately. Well, i'm having a hard time actually getting them to work for some reason.. It's a little hard to describe so i'll do the best I can. I don't know if I hit something by accident, but on all my presets that i've made, I typically use the "Stomp/Snap" setting. Now... it's still set to that setting, however the four bottom switches are just inactive.. There's no lights indicating that anything can be changed. I can no longer switch between snapshots while performing. The top switches work totally fine for stompbox purposes.. But the bottom ones aren't doing anything. The bottom ones however do work normally if I set them to stomps, just not for snaps. Any help would be awesome, I can't figure this one out.
-
Here's some of the most popular Helix tutorial video we have. For more check out our YouTube page https://www.youtube.com/user/Line6Support Helix Snapshots Helix Shortcuts 4 Cable Method Footswitch Modes Customizable Scribble Strips
-
I am experiencing strange behavior when I attempt to work with snapshots. I have followed the manual but it's not doing what the manual says it should. I press both preset button simultaneously, and it shows all four snapshots blinking... Then if I click a snapshot, it kicks me back to the presets. I've attached a movie to show what's going on... I have updated to the latest firmware 2.54.0. Any help would be appreciated. Snapshots-HX-not-working-1.mov Maybe I'm missing something?
-
Hi there, I just updated Native, and I'm really excited about using snapshots. I just can't figure out how to store/save them? Any help? Thanks!
-
Has anyone had issues/experience with snapshots AND using HELIX to control external gear via MIDI? I use helix to run Ableton Live via MIDI notes that are assigned to (momentary)footswitches in HELIX. This has worked perfectly in STOMP mode as long as I've had my HELIX, but I recently started working with snapshots and LOVE the flexibility. Here's the problem I'm having: It seems that my HELIX is learning which footswitches I'm stomping to control Ableton, so when I recall a snapshot, the switches I have stomped are ENGAGED, and the note value of each switch changes to C -1. I've tried using MIDI CC's instead of notes with no success either. If anyone has any input or help, I'd really appreciate it. Thanks!
