Please ensure Javascript is enabled for purposes of website accessibility Jump to content

Search the Community

Showing results for tags 'speaker'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Forums

  • Community Support
    • Multi-Effects Units
    • Variax Instruments
    • Amplifiers
    • Computer Based Recording
    • Live Sound
    • Pedals/Controllers
    • Dream Rig - Line 6 Product Integration
  • General Discussion
    • Tone Discussion
    • Line 6 Lounge

Categories

  • General FAQ
    • Operating System-specific Information
  • Tutorial Videos
  • Effects/Controllers
    • HELIX/HX
    • DL4 MkII Stompbox Modeler
    • FBV Controllers (MKII / 3)
    • M5
  • Amplifiers
    • Powercab
    • Catalyst
    • Spider V
  • POD
    • POD Go
    • Pocket POD
    • POD Express
  • Guitars
    • JTV / Shuriken / Variax Standard / Workbench HD
  • Relay/XD-V Digital Wireless
  • Recording
    • Helix Native
    • Metallurgy
    • Echo Farm/Amp Farm
    • POD Farm 1/2.0/2.5
    • Computer Audio Set Up and Troubleshooting
  • Legacy Products
    • POD
    • Amps
    • 1st Gen Variax Guitars / Bass / Workbench
    • Effects and Controllers
    • AMPLIFi Series
    • Live Sound
    • Digital Wireless
    • Mobile Products
    • POD Studio / Tone Port / GuitarPort
    • Software
    • Dream Rig

Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Joined

  • Start

    End


Group


AIM


MSN


Website URL


ICQ


Yahoo


Jabber


Skype


Location


Interests


Registered Products

  1. I recently purchased a POD HD500 and love it. I now need a speaker for it. Now I live in apartment so that is also to be considered. I have played it thru my Peavey Vypyr but looking for much better than what that has to offer, I even tried it through my Klipsch computer speakers, but need more headroom. I have considered an active PA speaker but when I looked at those they are 800+ watts and me being in an apartment not sure if that is the way to go or not. I have also considered the Tech21 power Engine. Now I do have a EVH 5150-III 1x12 cab but no power amp. So what would you guys suggest?
  2. sorry for stupid questions, but this is all new to me. I don't want to pay for a real combo amp or amp/cab if i only intend or care to hear sounds from the POD's amp modelers. Can i connect the pos direct to a 1x12 speaker cabinet or does the speaker cabinet itself require an external amp to function?
  3. The right speaker in my Spider II amp goes "in and out". I've noticed that if I go to a volume above 5, both speakers work, but below, the right speaker has problems. Any recommendations on how to troubleshoot and fix this problem?
  4. HOLA! I am looking for ways to create sounds in my hd500 to be as real as possible. I mean, I want to be sure to be listening to the right thing. It happened that after editing a sound (I thought right) then I found very different in other audio systems. I know, it is normal that the systems audio sound distinct from one enclosure to another, even more if they are different systems. The aim: Same possibilities to create a sound as if a real amp in my house. Which is the best? Headphones? Professional Monitors? Home monitors? Another thing? Thank you very much to all!
  5. I'm getting another head anyways, but I wanted to plug the cab in the the "headphone out" are in my amp, I tried it for 10 mins and the Celestion speaker in it sounds a wee bit better than the one in my Spider. My only concern is that it's a 40watt speaker and my amp is 75watts. Am I correct in assuming it will hurt my amp?
  6. Hello guys. I bought line 6 ux2 and I want to hear my guitar through my pc speakers. How can I connect them?
  7. The LINE6 L3TM SPEAKER BAG arrived today. I like to share some pictures with you and discuss a feature for these bags. Overall the bag looks solid enough to handle the L3t speaker wherever I play. But sadly somebody at Line6 missed to design a feature I did expect to come along with the bag: A lot of musicians play HD Pods with the L3t speakers because it´s a great sounding and very flexible combination to play live with. -- > Bass/Guitar->HD POD->L6->L3t --> :-)) When I ordered the bag I did expect that you can open the front of the bag when playing a gig or jamming someplace as well as the top of the bag. Why? Because you don't have to unpack the L3t speaker when plugging in your HD500 (via L6 Link Cable). But as you can see on the photos: You can`t open the front. And you can´t customize the bag because you then have to destroy the the speaker protection material that is inside the bag. Flip your screen an take a look at the photos. Maybe you see what I am trying to say: Will Line6 change this / add this feature if only enough of us are asking for this?
  8. Hello all, Several days ago, I received an LD15 bass amp from eBay and was able to actually start using it. Yes, I got burned on this purchase. When trying it out on two different basses and cords (just to make sure it wasn't any of my equipment), the amplifier continues to make a rattling noise primarily on the "E" string (though the "A" string is also affected at times). Never did I try to "crank" the volume of the amp; I didn't take it past the twelve o'clock position. Even turning down all knobs fully left except for the master (which was only turned to about 4 on the clean setting), the amp still makes an annoying rattling noise. The rattling is about as loud as the note being played. I realize that it is only a 15 Watt amplifier, but it still should allow me to play louder than essentially a whisper without the distinct rattling noise. I have turned all of the dials to various levels to see if that was the problem, and much to my dismay, I was not able to produce a healthy tone from this amp. Today, I took it to a reputable instrument and audio shop to have it looked at, and they told me that the speaker is essentially completely broken and will not function at louder volumes. They were able to tell me that there is nothing electronically wrong with it; the problem has been isolated to being a "busted" or "blown out" speaker. I had not even put any of the volume knobs past the recommended "12 o' clock" setting at any given point. Needless to say, this is very upsetting. Now I am looking at buying a new speaker for this device because I am sure I would really like the device if it were to work. My question is, first, how many ohms is this amp? Secondly, would fitting it with a new speaker rated higher in terms of wattage adversely affect the amp? (such as replacing it with a 20 or 25 W speaker) Thank you for reading this and assisting me.
  9. Hello, i own a line 6 ux1 and i was wondering if i could use my Logitech X-540 5.1 Speaker System as monitors. Of course i don't want to use 5.1 but i guess i could just leave 2 speakers + the sub.Can this work? Will this setup give me clear and descent results or studio monitors is the only way? If i can use them my logitech how do i connect them in my ux1(i noticed they have a single output). Thanks in advance.
  10. Top Features Smart Speaker Modes for great live sound in any live sound situation Multi-function design for true scalability L6 LINK digital networking for multi-speaker setups 800-watt, 2-way, bi-amped speaker system Multi-band feedback suppression On-board accelerometer and pole-mount sensors Virtual Tilt-back projects speaker?s output upwards in backline mode Tour-grade plywood enclosure with? M10 suspension points Retractable handle for easy portability
  11. Français Deutsch Q: Where can I find product manuals and specifications for the StageSource speakers? A: Product manuals and specifications for the StageSource L3t can be found Here. Product manuals and specifications for the StageSource L3s can be found Here. Q: How do I use the StageSource L3t or L3m? A: Check out our video tutorial " ". We also have examples of some common ways to setup the StageSource speakers available Here. Q: Why can't I hear anything from the middle driver on my L3t or L3m? A: The upper woofer always plays below 250Hz. The lower woofer works with the HF driver with a crossover that varies between 2.2 kHz and 7 kHz, depending on the chosen speaker mode. The details for these specs are listed here. Q: What are Smart Speaker Modes? A: The StageSource L3t and L3m use six powerful DSP-based Smart Speaker modes optimized for a variety of performance scenarios including front-of-house PA, floor monitor, personal PA, keyboard backline, acoustic guitar backline, or with a multi-effects guitar processor as a high-performance electric guitar speaker system. The six available Smart Speaker Modes are: Reference/P.A. - Reference/P.A. mode is for live sound reinforcement and features a flat frequency response, a 2.2kHz crossover frequency and maximum low-frequency extension. This mode is the optimal reference setting, whether your cabinet is mounted on a tripod, on stage or installed as part of a larger multi-component system. Playback - Playback mode is optimized for pre-recorded music. Functionally, Playback mode is similar to P.A. mode but includes an EQ curve that emphasizes extreme low and high frequencies, making it well-suited for playing back music from a CD or MP3 player, or for DJ applications. Floor Monitor - Floor Monitor mode is similar to P.A. mode with a slight reduction in low frequency content to counteract coupling when placing the speaker on the floor. If the speaker is powered on while in a horizontal position, Floor Monitor speaker mode will be selected automatically, you can then change to a different mode, if desired. Keyboards - Keyboard Mode optimizes the L3t for use as backline amplification for a keyboard rig. This mode features a flat frequency response with a 3.5kHz crossover frequency, adding more relative energy to the cone and providing a warmer response that is pleasant for instruments. This mode also provides Virtual Tilt-back, which optimizes the speaker’s tuning to achieve an upward tilt to its main axis and aim the sound towards the performer. Acoustic Guitar - Acoustic Guitar mode is optimized to provide a warm and balanced full-range amplification experience for acoustic instruments. This mode also features a 3.5kHz crossover frequency, with a custom-tailored low-frequency response to minimize “boominess” than can occur when amplifying acoustic instruments. Acoustic Guitar mode provides Virtual Tilt-Back, which optimizes the speaker’s tuning to achieve an upward tilt to its main axis and aim the sound towards the performer. Electric Guitar - Electric Guitar Mode was designed to accommodate the modern guitarist who uses a multi-effects floorboard device such as the Line 6 POD®. Rather than sending the signal from the guitarist’s floorboard to an amplifier and then mic’ing the amp, this L3t mode features an overall frequency response that emulates the sound of a 212 combo amp. The dual 10” speakers play full range, with the horn adding only the smallest amount of sparkle to the sound. Q: Will StageSource L3t and L3m function as a floor monitor? A: The StageSource L3t and L3m feature two sets of kickstands that can be used to angle the speakers upwards towards the performer. The two back-panel kickstands flip out, allowing the L3t and L3m to be angled upwards at 60°, the side mounted carrying handle doubles as a kickstand as well, allowing the L3t and L3m to be angled upwards at 30°. The StageSource L3t and L3m both include a smart speaker mode optimized for using the loudspeaker as a floor monitor. If the speaker is powered on while in a horizontal position, Floor Monitor speaker mode will be selected automatically. Check out our video tutorial on " " to see how to how to use the built in kickstands. Q: How does the L6 Link Network work with the StageSource speakers? A: Check out our video tutorial " ". When connecting speakers together in a L6 Link network, we recommend using 110-ohm AES/EBU XLR cables. Q: Can the StageSource speakers be pole mounted? A: The StageSource L3t and L3m both feature a pole mount that accommodates standard 35 mm diameter speaker poles. The L3s features three threaded pole mounts (one on top, two on the right side) to accommodate Line 6 M20 threaded speaker poles. The M20 threaded speaker pole part numbers are: Short pole - for mounting an L3t/L3m tower (Part # 98-037-0003) Long pole - for mounting an L3t/L3m tower (Part # 98-037-0004) Q: What is the proper method for suspending the StageSource speakers? A: The StageSource L3t and L3m provide four threaded M10 attachment points for suspension and one threaded M10 attachment point for pull-back and aiming the speaker. These are designed to allow for suspending the loudspeaker only by a qualified professional familiar with safe rigging practices. Improper installation may result in damage to the speaker or support structure, or injury or death. WARNING! If you are unfamiliar with suspending loudspeakers, con­sult an authorized, qualified professional prior to installation. WARNING! Before rigging or suspending any loudspeaker product, in­spect all rigging hardware, cabinets, attachment points, transducers, and associated peripherals. Any absent, warped, or non-load rated equipment could seriously compromise the strength of the installation and should be immediately corrected. WARNING! Always follow all municipal building codes, as well as any local, state, and federal safety guidelines regarding the installation and operation of loudspeakers and associated peripherals. Always use two attachment points on either the top or bottom of the L3t/L3m The rear panel pull-back attachment point is only for aiming the speaker downwards (see illustration below); it is not to be used as a load-bearing suspension point. For permanent installations, use only the Line 6 eyebolt kit (Part # 98-037-0005). Q: Can I use a different crossover with the StageSource speakers? A: Using an external crossover is not recommended when using L3t tops with L3s subs. Simply connecting the pair via Line 6 link activates the precision engineered internal crossover and DSP. However when matching the L3t speaker system with a 3rd party subwoofer an external crossover may be necessary. In this case, connect the Main outputs of your mixer into your crossovers inputs. Connect the high/mid frequency output of the crossover to the rear panel Line Level Input of the L3t or L3m loudspeaker, than connect the low frequency output of the crossover into the line input of a self-powered subwoofer system or into the power amp that powers your passive subwoofer cabinet. Q: Can I install a different speaker driver into the StageSource speaker cabinet? A: The speaker drivers used are specifically designed for the speaker cabinets and speaker modes used with the StageSource series. Changing the speaker drivers can effect reliability and performance and will void the manufacturer warranty. Q: Where do I register my new StageSource speakers? A: Line 6 products can be registered to your Line 6 User account Here. Q: Where can I find out more information about Live Sound? A: Check out our Live Sound Resources and Live Sound Glossary of Terms. Wo kann ich Benutzerhandbücher und Spezifikationen der StageSource Lautsprecher finden? Handbücher und Spezifikationen des StageSource L3t können Sie hier finden, Handbücher und Spezifikationen des L3s hier und für das L3m, hier. Wie benutze ich die StageSource L3t und L3m? StageSource L3t und L3m haben sechs leistungsfähige Smart Speaker Modi, welche auf digitaler Signalverarbeitung basieren und für eine Vielfalt von Aufführungs-Szenarien optimiert sind, wie z.B. Front of House Beschallung, Bodenmonitor, persönliche Beschallungsanlage, Keyboard Backline, Akustische Gitarren Backline oder mit Multieffekt Gitarrenprozessor als hochleistungs Lautprechersystem für elektrische Gitarren. Die sechs verfügbaren Smart Speaker Modi sind: Reference/P.A.: Der Reference/P.A. Modus dient der verstärkung von Live Sound und hat einen fixen Frequenzgang, eine 2.2kHz Trennfrequenz und zusätzlich eine Erweiterung der maximal Tieffrequenz. Dieser Modus ist die beste Allgemeineinstellung egal ob Ihr Gerät nun auf einem Dreibein befestigt ist, auf der Bühne steht oder in ein größeres System mit mehreren Komponenten eingebunden ist. Playback: Der Playback Modus ist optimal für voraufgezeichnete Musik. Funktionell ist dieser Modus dem P.A. Modus sehr ähnlich. Er beinhaltet jedoch eine EQ Kurve, die extrem tiefe und hohe Frequenzen betont, was ihn perfekt zum Abspielen von Musik eines CD/MP3 Players oder zur Benutzung von DJ Anwendungen macht. Floor Monitor: Der Floor Monitor Modus ist auch wieder ähnlich dem P.A. Modus, jedoch mit einer leichten Minderung des Tieffrequenzberiches, was eine Bass Frequenzkopplung unterdrückt wenn man den Monitor auf den Boden stellt. Wenn der Lautsprecher angeschaltet ist während er sich in einer horizonatalen Position befindet wird der Floor Monitor Modus automatisch eingeschaltet. Sie können dann immernoch den Modus wieder umstellen wenn Sie möchten. Keyboards: Der Keyboard Modus optimiert den L3t zur Nutzung als Backline Verstärker für ein Keyboard-Rig. Dieser Modus hat eine fixen Frequenzgang mit einer 3.5kHz Trennfrequenz, was zusätzliche Energie an die Membran liefert und so eine wärmere Resonanz erzeugt, die besser ist für Instrumente. Acoustic Guitar: Der Acosutic Guitar Modus ist auf warme und balancierte Verstärkung für akustische Instrumente optimiert. Dieser Modus hat eine 3.5kHz Trennfrequenz mit maßgeschneiderter Tieffrequenz um Dröhnen zur vermindern, welches entstehen kann wenn man akustische Instrumente verstärkt. Außerdem optimiert dieser Modus noch die Abstimmung des Lautsprechers um eine Aufwärtsneigung zu simulieren und so den Ton auf den Künstler zu richten. Electric Guitar: Der Modus Electric Guitar wurde für den modernen Gitaristen entworfen, der ein Multi-Effekt Floorboard wie das Line 6 POD® benutzt. Anstatt das das Signal vom Floorboard an den Verstärker gesendet wird, simuliert der Lautsprecher den Ton einer 212 Combo anhand eines angepassten Gesamtfrequenzganges. Die doppelten 10" Lautsprecher spielen hier die volle Spektrum. Das Horn fügt nur noch die kleinste Verfeinerung hinzu. Funktionieren die StageSource L3t und L3m als Bodenmonitore? StageSource L3t und L3m haben zwei Sätze von ausklappbaren Ständern, die benutzt werden können um den Lautsprecher auf den Künstler zu richten. Die zwei Ständer auf der Rückseite des L3t und L3m können ausgeklappt werden um einen Winkel von 60° zu erzeugen und der Tragegriff kann ausgeklappt werden und dient so auch als Ständer mit einem Winkel von 30°. L3t und L3m enthalten beide einen Smart Speaker Modus, der die Lautsprecher als Bodenmonitore optimiert. Wenn der Lautsprecher angeschaltet ist während er in horizontaler Position ist, schaltet sich der Floor Monitor Modus automatisch an. Für eine Anleitung schauen Sie sich bitte dieses Video an: " " (Englisch) Wie funktioniert das L6 Link Netzwerk mit den StageSourde Lautsprechern? Dieses Video beschreibt die Nutzung von L6 Link: " ". Wenn Sie Lautsprecher in ein L6 Link Netzwerk einbinden wollen empfehlen wir die Nutzung von 110 Ω AES/EBU XLR Kabeln. Kann man die StageSource Lautsprecher auf eine Stange montieren? Die StageSource L3t und L3m haben beide eine standard 35mm Einfassung. Das L3s hat drei Einfassungen (Eine oben und zwei auf der rechen Seite.) um Line 6 M20 Stangen zu befestigen. Die Teilenummern für M20 Stangen sind: "Short pole" – Zum Aufbau eines L3t/L3m Turmes. (Nummer 98-037-0003) "Long pole" – Zum Aufbau eines L3t/L3m Turmes. (Nummer 98-037-0004) Was ist die ordnungsgemäße Methode zur Aufhängung meiner StageSource Lautsprecher? Die StageSource L3t und L3m Lautsprecher bieten vier M10 Befestigungspunkte für die Aufhängung und einen M10 Befestigungspunkt um den Lautsprecher nach hinten zu ziehen und auszurichten. Diese sind dazu entworfen, von einem qualifizierten Professionellen mit ausreichend Rigging-Erfahrung, den Lautsprecher aufzuhängen. Nicht ordnungsgemäße Befestigung oder Aufhängung kann denn Lautsprecher, die Aufhängung beschädigen und zu Verletzungen und Tod führen. ACHTUNG! Wenn Sie sich nicht mit der Aufhängung von Lautsprechern auskennen konsultieren Sie bitte einen autorisierten, qualifizierten Professionellen vor der Installation. ACHTUNG! Vor dem Riggen oder Aufhängen eines Lautsprechers müssen Sie immer jegliche Hardware, Boxen, Befestigungspunkte, Wandler, und alle anderen angeschlossenen Geräte überprüfen. Jedes fehlende, verbogene Material oder Material, welches keine Belastbarkeitsmarkierung hat, könnte die Festigkeit des Aufbaus kompromittieren und sollte umgehend korrigiert werden. ACHTUNG! Folgen Sie immer den kommunalen Bauvorschriften sowie lokalen, staatlichen und föderalen Sicherheitsrichtlinien in Bezug auf den Aufbau und Betrieb von Lautsprechern und dazugehörigen Peripheriegeräten. Benutzen Sie immer zwei Befestigungspunkte entweder oben oder unten des L3t/L3m. Der hintere Befestigungspunkt ist ausschließlich zur Ausrichtung des Lautsprechers abwärts (wie auf folgendem Bild) und darf nicht als tragender Aufhängungspunkt benutzt werden. Für permanenten Aufbau, benutzten Sie bitte ausschließlich das Line 6 Eyebolt Kit (Teilenummer: 98-037-0005) Kann ich ein anderes Crossover mit meinen StageSource Lautsprechern benutzen? Die Nutzung eines externen Crossovers mit L3t Tops und L3s Subs ist nicht empfohlen. Die Verbindung der Beiden via Line 6 Link aktiviert das interne Crossover und die digitale Signalverarbeitung. Wenn Sie jedoch den L3t Lautsprecher mit einem Subwoofer eines Drittanbieters verbinden könnte ein exteres Crossover von Nöten sein. In diesem Fall müssen Sie dann die Main Outs des Mixers in die Crossover Eingänge stecken. Verbinden Sie den Hoch-/Mittenfrequenz Ausgang des Crossovers mit dem Line Level Eingang des L3t oder L3m Lautsprechers und verbinden Sie dann den Ausgang der Tieffrequenz des Crossovers mit dem Line Eingang des Subwoofers (sofern mit externer Stromversorgung ausgerüstet) oder in die Endstufe, die Ihren passiven Subwoofer versorgt. Kann ich einen anderen Treiber auf die StageSource Lautsprecher installieren? Die Lautsprechertreiber, die auf den StageSource installiert sind benutzen speziell für die Modelle entworfene Treiber und Lautsprecher Modi. Das Wechseln der Treiber kann Performance und Verlässlichkeit beeinträchtigen außerdem hebt es die Herstellergarantie auf. Wo kann ich meine neuen StageSource Lautsprecher registrieren? Line 6 Produkte können auf Ihrem Line 6 Benutzerkonto registriert werden: Hier. Wo kann ich mehr Informationen über Live Sound finden? Versuchen Sie es hier: Live Sound Resources und hier: Live Sound Glossary of Terms. (Englisch) Où est-ce que je peux trouver des manuels et spécifications des haut-parleurs StageSource? Manuels d'utilisations et spécifications du StageSource L3t ici, les manuels et spécifications du L3s ici et pout le L3m, vous les pouvez trouver ici. Comment est-ce que j'utilise le StageSource L3t ou L3m? Consultez notre vidéo tutoriel " " (anglais). Quelques exemples communs pour installer les haut-parleurs StageSource: Ici. Que sont les modes Smart Speaker? Les StageSource L3t et L3m utilisent 6 modes Smart Speaker puissants basés sur DSP (Traitement numérique du signal) qui sont optimisés pour divers scénarios, comprenant les systèmes PA, comme retour de scène, les systèmes PA personnels, clavier en backline, guitare en backline ou comme système haut-parleur guitare de haute performance avec un processeur multi-effets de guitare. Ces modes Smart Speaker disponibles sont: Reference/P.A.: Reference/P.A. est pour renforcement du son live et a une réponse en fréquence fixée, une fréquence de coupure de 2.2kHz et une extension de basse-fréquence maximale. Ce mode est le réglage optimal si votre haut-parleur est monté sur un trépied, sur scène ou installé comme partie d'un système plus grande à plusieurs composants. Playback: Le mode Playback est optimisé pour la musique préenregistrée. Ce mode est similaire au mode P.A. mais a une courbe d'égalisation qui met l'accent dur les fréquences extrêmement basses et hautes que le fait le mode optimal pour jouer la musique d'un lecteur MP3 ou CD ou pour les applications DJ. Floor Monitor: Le Mode Floor Monitor est similaire au mode P.A. mais avec une réduction en contenu en fréquence basse pour neutraliser le couplage si vous le placez sur le sol. Si l'haut-parleur est allumé et en position horizontale, le mode Floor Monitor est sélecté automatiquement mais vous pouvez le changer si désiré. Keyboards: Le mode Keyboard optimise l'haut-parleur pout l'utilisation avec un rig au clavier. Ce mode a une réponse en fréquence fixée avec une fréquence de coupure de 3.5kHz, ce qu'ajoute d'énergie relative à la cône et offre une réponse améliorée pour l'utilisation avec des instruments. Ce mode change aussi le réglage du haut-parleur pour atteindre une inclination vers le haut et vise comme-ça le son vers l'artiste. Acoustic Guitar: Le mode Acoustic Guitar est optimisé pour l'expérience d'amplification en pleine-gamme équilibrée avec les instruments acoustiques. Ce mode a une fréquence de coupure de 3.5kHz avec une réponse en fréquence basse sur mesure pour réduire la résonance que peut se produire si on amplifie des instruments acoustiques. Le mode Acoustic Guitar change aussi le réglage du haut-parleur pour atteindre une inclination vers le haut et vise comme-ça le son vers l'artiste. Electric Guitar: Le mode Electric Guitar a été créé pour le guitariste moderne, qui utilise un floorboard come le Line 6 POD®. Plutôt que le signal sera transféré du floorboard au amplificateur, ce mode a une réponse de fréquence globale qui émule le son d'un ampli combo 212. Les deux haut-parleurs 10" jouent en gamme complète. Le Pavillon à chambre de compression ajoute seulement une peut de vivacité. Est-ce que StageSource L3t et L3m fonctionnent comme retour de scène? StageSource L3t et L3m ont deux séries de kickstands lesquelles peuvent être utilisés pour orienter le haut-parleur vers l'artiste. Les deux kickstands du panneau arrière déplient pour un angle de 60° mais la poignée de transport est aussi un kickstand qui déplie pour un angle de 30°. L3t et L3m comprennent un mode Smart Speaker optimisé pour l'utilisation comme retour de scène. Si le haut-parleur est allumé en position horizontale, le mode Floor Monitor sera sélecté automatiquement. Ce vidéo vous aide avec l'utilisation des kickstands: " " (anglais) Comment est-ce que L6 Link fonctionne avec les haut-parleurs StageSource? Regardez ce vidéo tutoriel: " " (anglais). Si vous connectez vos haut-parleurs avec un réseau L6 Link, nous recommandons un câble AES/EBU XLR de 110 Ω. Est-ce que je peux monter StageSource sur un poteau? Les StageSource L3t et L3m on une fixation pour un poteau standard 35mm. Le L3s a trois fixations (une en dessus et deux sur le côté droit) pour les poteaux Line 6 M20. Les numéros de pièces pour les M20 poteaux sont: Poteau courte pour L3t et L3m (N° de pièce 98-037-0003) Poteau longue pour L3t et L3m (N° de pièce 98-037-0004) Quelle est la propre méthode de suspendre les haut-parleurs StageSource? Les StageSource L3t et L3m ont quatre points de fixation M10 pour la suspension et un point de fixation M10 pour tirer et viser l'haut-parleur. Ces points sont créés pour la suspension du haut-parleur seulement par un professionnel qualifié avec pratique sûre. Installation incorrecte peut causer de dommage au haut-parleur, la structure ou blessure ou décès. ATTENTION! Si vous ne savez pas comment suspendre des haut-parleurs, consultez du personnel qualifié avant l'installation. ATTENTION! Avant que vous suspendiez un produit haut-parleur, vérifiez toujours tous le matériel, haut-parleurs, points de fixation, transducteurs et périphériques associés. N'importe quel produit manquant, déformé ou sans capacité de gain spécifiée peut compromettre la robustesse de l'installation et doit être corrigé directement. ATTENTION! Suivez toujours les codes du bâtiment municipaux et les directives de sécurité locale, gouvernementale et fédérale concernant l'installation et exploitation des haut-parleurs et périphériques associés. Utilisez toujours deux points de fixation en dessus ou dessous du L3t/L3m. Le point de fixation en arrière est uniquement pour viser le haut-parleur et ne peut pas être utilisé comme point de fixation portant. Utilisez uniquement les Line 6 Eyebolt Kits (Part # 98-037-0005) pour les installations permanentes. Est-ce que je peux utiliser un crossover différent avec les haut-parleurs StageSource? Ce n'est pas recommandé d'utiliser un crossover externe avec les L3t tops et L3s subs. Simplement connecter les deux via L6 Link active le crossover et DSP interne. Si vous soulez connecter le L3t avec un subwoofer d'un tiers, un crossover externe peut-être nécessaire. Dans ce cas, connectez les Main Outs du mixeur avec les entrées crossover. Connectez les sorties de fréquence mi/haute du crossover au panneau en arrière (Line Level) du L3t ou L3m et connectez la sortie de fréquence basse du crossover au Line In du système subwoofer (avec alimentation externe) ou au ampli de puissance qui fais fonctionner le subwoofer passive. Est-ce que je peux installer d'autres pilotes dans mon haut-parleur StageSource? Les pilotes sont spécialement conçu pour les haut-parleurs StageSource et les modes apprenantes. Le changement du pilote peut affecter la fiabilité et performance et annulera la garantie. Où est-ce que je peux enregistrer mes StageSource? Les produits Line 6 peuvent être enregistrés sur votre compte Line 6 ici. Où est-ce que je peux trouver plus d'informations sur Live Sound? Essayez ses liens (en anglais): Live Sound Resources et Live Sound Glossary of Terms.
  12. See attached document for StageSource L3m Specifications.
  13. See attached document for StageSource L3s Specifications.
  14. Deutsch Français Q: How do I access the tuner? Spider Tuner FAQs Q: How do I save the Artist/Song presets from the Spider III/IV into the user banks so I can access those presets from my FBV series controller? A: Hold the desired Channel button (A B C D) for two seconds, then use the four-way arrow selector to choose the bank (number) and location (A, B, C or D) where you want to save the preset to. Select the channel button again, and you will see a rapid flash on the channel light to show the preset has been saved. Q: How do I operate the "boost" on the Spider series amplifier? Spider I, II, and III: The Spider Distortion Boost is activated by holding down the “tap tempo” button while rotating the “drive” control above the 12 o'clock position. The B light will illuminate to indicate that the boost is active. Spider IV: The boost feature can be edited by pressing the presets encoder, then using the right/left function on the four-way arrow selector to select “boost”. You can then activate the feature, increase or decrease the amount of boost (up to 8 db), and select “pre” and/or “post”. This can be activated from the FBV Shortboard MK II by the “fucntion 1” button, and the Effect Loop button the FBV Shortboard (Mk I). Q: How do I operate the Noise Gate on the Spider series amplifier? Spider III: Press and hold Tap as you turn the Reverb knob up past twelve o’clock, and you turn on a built-in Noise Gate, which helps to cut down on hiss and noise. When you do this, the Channel D LED comes on to indicate that the Gate is on. Spider IV: The Noise Gate feature can be edited by pressing the “presets” encoder, then using the right/left function on the four-way arrow selector to select “gate”. You can then choose from “Off”, “Gate”, “Noise Reduction”, or “Gate + Noise Reduction”. Use the up/down arrows to select Threshold and Decay, which are adjustable with the Presets encoder. Q: Is there a way to control the amount of effect mix repeats the delay effect makes? Spider I, II, and III: we decided to remove some of the editing capabilities and make it as simple as possible. In addition, we wanted to make it as affordable as possible, and removing some of the edit features was one of the ways that we were able to keep the cost lower. This being the case, you cannot change the delay feedback rate on the Spider. Spider IV: The delay repeats (feedback) can be edited by pressing the presets encoder, turning to “FX3”, the using the up/down arrows to “FdBk”. You can then increase or decrease the amount of feedback by turning the preset encoder, as well as the delay time and mix. Q: Every time I switch to a certain amp model the delay comes on - how can I stop this? Spider I, II, and III: When you select an Amp Model, the Spider automatically sets its tone controls and effects to match that Amp Model. You can disable the auto-FX selection (but not tone control auto-selection), by powering up Spider with the Channel D/Insane button held. Be aware that the auto-selection is re-enabled next time you power up. If you absolutely never want to hear a particular effect (such as delay), you can turn the SmartFX knob to 'Off', then press and hold a channel button until it blinks, and you've saved a new version of the sound, without any effects. Spider IV: The Auto effect feature can be enabled by pressing the presets encoder, then using the right/left function on the four-way arrow selector to select “autoFX”. You can then activate the feature, as well as turn the tap light on/off and set the timer for the display backlight. Q: Why does the tap tempo light always blink? Can I turn the tap tempo light off? Spider I, II, and III 75-150: The tap tempo light shows the tempo of the delay, even if the delay is not active. There is no way to disable the tap tempo light on the Spider I, II, or III Series amplifiers. Spider IV 75-150: The tap tempo light is assignable to the modulation and delay effects, and shows the tempo of the assigned effect. The tap feature can be enabled by pressing the presets encoder, then using the right/left function on the four-way arrow selector to select your effect, then using the up/down arrow to locate “tap”. The tap feature can be enabled or disabled by turning the “presets” encoder, then using the right/left function on the four-way arrow selector to select”setup”. You can then use the up/down arrows to locate “Taplite”, and de-activate the tap light feature by turning the preset encoder. Q: Can I connect my Spider series combo amp (i.e. 15, 30, 75, 120) to an external speaker cabinet? A: No, as there is no external speaker jack to power an external cabinet. The Spider series 150 combo amplifier does have two 8 ohm external speaker outputs that will mute the internal speakers when engaged. See the following link for more cabinet connection information: Line 6 Head and Cabinet Connections Q: How can I record direct the Spider series amp signal directly into a computer? A: You can use the headphone jack as a direct line out to record your Spider series amplifier into any line input on your computer's sound card or audio interface. For sound card connection, you will need a cable with one male stereo 1/4" jack on one end-to plug into the headphone jack of the Spider, and a male 1/8" stereo mini jack-like (the kind on Ipod type headphones) to plug into the sound card. This will work for most computer sound cards, as they often have 1/8" stereo mini inputs and outputs. If you have an audio interface or a professional sound card that have multiple 1/4" inputs, you will need a cable with one male 1/4" TRS (stereo) jack on one end, and two male 1/4" mono jacks on the other end (commonly known as an “insert cable”) to create a stereo image. Take care in setting the output level on your amp: adjust the master volume to get the cleanest and most noise-free sound when the volume control on the toolbar of your computer is on full, with the volume control on your computer speakers set to normal, reasonable listening levels. If you set the output level on your amp too high, the sound will be undesirably distorted. Set it too low and the sound will be noisy. All you need then is some sort of recording software, of which there are many options available. Q: Is there a way to use the POD-Style Out (headphone) jack without disabling the speakers? A: There is no supported way to run both the speakers and the headphone jack at the same time. Q: Can I use an external effects pedal or processor with a Spider series amplifier? A: Effects pedals will almost always work well in front of the Spider series amplifiers. Just be certain that the output level of the external effect is not set too high as it could overload the input of the Spider. Most rack-mount processors are designed for line level use and often don't sound quite right when connected to the front of an amplifier. Q: Can I use a MIDI controller with a Spider amp? A: The Spider series amplifiers do not have MIDI In or Out connections, but the Spider Valve Mark II does have MIDI jacks. We recommend that you use the correct Line 6 controller with your Spider series amplifier. Q: Do any of the Spider Series amplifiers have an effects loop? A: The Spider series (I, II, III, IV) amplifiers are not equipped with an effects loop, but the Spider Valve (I or II) series does have an effect loop. Q: Can I edit/backup my Spider sounds on my computer? A: The Spider IV series amplifier can be edited with the Spider IV Edit Software. The previous Spider series (I, II, III) tone editing must be done on the face of the unit, as there is no computer editor for the earlier Spider series. See the following link for more information on the Spider Edit software: Spider IV Edit (v1.02) FAQs Q: Which controller will work with my Spider series amp? Controller compatibility chart Q: Where can I get replacement knobs/speakers/logos for my Spider amplifier? Line 6 Store Wie kann ich auf den Tuner zugreifen? Spider Tuner FAQs Wie kann ich die Artist/Song Presets auf dem Spider II/IV in eine Bank abspichern, sodass ich es per FBV Controller ansteuern kann? Halten Sie dazu denn Knopf des gewünschten Kanals für 2 Sekunden gedrückt und benutzen Sie dann den 4-Weg Schalter um Bank und Position auszuwählen. Drücken Sie dann den Kanalknopf noch einmal. Das LED des Kanals soltle blinken, wenn dies passiert wurde das Preset gespeichert. Wie funktioniert der Boost auf meinem Spider Verstärker? Spider I, II und III: Halten Sie den Tap/Tempo Knopf gedrückt während Sie den Drive Knopf hinten gegen drehen. Das B Licht wird dann angehen um anzuzeigen, dass Boost eingeschaltet ist. Spider IV: Drücken Sie Presets und benutzen Sie dann die rechts und links Pfeile um Boost auszuwählen. Hier können Sie Boost dann aktivieren, Boost erhöhen oder verringern (bis zu 8db) sowie Pre oder Post auswählen. Diese Funktion kann aktiviert werden vom FBV Shortboard MkII aus. Drücken Sie dazu den Function 1 Knopf. Beim FBV Shortboard MkI müssen Sie den Effect Loop Knopf drücken. Wie bediene ich Noise Gate? Spider III: Halten Sie Tap gedrückt während Sie den Reverb Knopf hinten gegen drehen. Dies schaltet das Nosie Gate ein um Rauschen und Zischen zu unterdrücken. Außerdem schlatet sich das Kanal D Licht ein um Ihnen anzuzeigen, dass Noise Gate eingeschaltet ist. Spider IV: Noise Gate kann auf dem Spider IV bearbeitet werden. Drücken Sie den Presets Knopf und wählen Sie dann mit den rechts links Pfeilen Gate aus. Hier können Sie sich dann zwischen Off, Gate, Noise Reduction oder Gate + Noise Reduction entscheiden. Benutzen Sie dann die rauf runter Pfeile um Threshold oder Decay auszuwählen. Diese beiden Einstellungen können Sie dann auch bearbeiten anhand des Preset Knopfes. Gibt es einen Weg, die Menge des Repeats des Effect Mixes, der vom Delay Effekt erzeugt wird zu kontrollieren? Spider I, II und III: Um die Geräte so eifnach wie möglich zu halten, haben wir verschiedene Bearbeitungseinstellungen entfernt. Sie können leider die Delay Feedback Rate nicht einstellen. Spider IV: Drücken Sie den Preset Knopf. Drehen Sie dann aux FX3 und anhand der rauf runter Pfeile wählen Sie FdBk aus. Hier können Sie die Rate, Zeit des Delays und Mix dann selbst einstellen. Wiese blinkt das Tap Tempo Licht? Kann ich es abschalten? Spider I, II und III: Das Licht zeigt das Tempo des Delays an, auch wenn dieser nicht aktiv ist. Sie können dies leider nicht abschalten. Spider IV 75-150: Das Tap Tempo Licht können Sie manuell der Modulation und dem Delay Effekt zuweisen. Es zeigt dann das Tempo des zugewiesenen Effekts an. Drücken Sie dazu den Presets Knopf, benutzen Sie dann die rechts links Pfeile um Ihren Effekt auszuwählen und dann die rauf runter Pfeile um Tap zu finden. Tap kann hier mit dem Presets Knopf an oder ausgeschaltet werden und per rechts links Pfeile können Sie dann Setup auswählen. Benutzen Sie denn die rauf runter Pfeile um Taplite zu finden. Mit dem Preset Knopf können Sie jetzt das Licht an oder ausschalten. Kann ich mein Spider Combo an eine externe Box anschließen? Nein, es sind keine Ausgangsjacks vorhanden, um Boxen anzuschließen. Das Spider 150 Combo hat zwei 8 Ohm Ausgänge, die die internen Lautsprecher stumm stellen, wenn angeschlossen. Line 6 Head and Cabinet Connections Wie kann ich das Ausgangssignal meines Verstärkers direkt in den Computer spielen? Sie können den Kopfhörerausgang als Line Out benutzen und an einen Stereo In Ihres Computers anschliessen, wie z.B. eine Soundkarte oder eine Audio Schnittstelle. Für die meisten Soundkarten brauchen Sie ein Kabel mit ¼“ männlich für an den Verstärker zu 1/8“ männlichen für an den Computer. Dies wird für die meisten Computer funktionieren, da der größte Teil der Soundkarten einen 1/8“ Eingang haben. Wenn Sie eine Audio Schnittstelle oder eine professionelle Soudkarte haben, die mehrere ¼“ Eingänge haben, dann brauchen Sie ein 1/4“ x2 mono zu ¼“ x1 stereo um Stereo Audio zu erhalten. Achten Sieaber bitte auf das Ausgangslevel des Verstärkers, Sie können so den Master Volume einstellen denn wenn dieser zu hoch eingestellt ist, dann wird der Sound verzerrt und wenn er zu niedrig ist, dann wird der Sound rauschen. Zu guter Letzt brauchen Sie dann noch eine Aufnahmesoftware. Kann ich den Kopfhörerausgang auch benutzen ohne die Lautsprecher abzuschalten? Nein, beides kann nicht gleichzeitig laufen. Kann ich ein externes Effekt Pedal oder einen Przessor benutzen? Effekt Pedale werden fast immer funktionieren, achten Sie einfach auf den Ausgang des Pedals, da dieser den Verstärker überladen kann. Die meisten Rack Prozessoren sind für Line Level entworfen und hören sich daher nicht richtig an, wenn man sie an den Verstärker anschließt. Kann ich einen MIDI Controller mit dem Spider Verstärker benutzen? Die Spider Verstärker haben weder MIDI Ein- noch Ausgang. Der Spider Valve Mark II jedoch hat einen. Wir empfehlen die Nutzung eines Line 6 Pedals. Haben die Spider Verstärker einen Effects Loop? Nein, nur die Spide Valve MkI sowie MkII haben einen. Kann ich Sounds, die auf meinem Spider sind auf meinem Computer abspeichern oder bearbeiten? Den Spider IV Verstärker können Sie anhand der Spider IV Edit Software bearbeitet werden. Bei allen anderen Spider wird die Tonbearbeitung direkt vorne am Verstärker durchgeführt, da diese keine Edit Software haben. Weitere Informationen: Spider IV Edit (v1.02) FAQs Welcher Controller funktioniert mit dem Spider Verstärker? Controller Kompatibilität Wo kann ich Ersatzteile für den Verstärker kaufen? Line 6 Store Comment puis-je accéder le Tuner? Spider Tuner FAQs Comment est-ce qu’on enregistre les presets Artist/Song sur le Spider II et IV dans une banque pour l’accéder avec un contrôleur FBV? Maintenez enfoncé le bouton du canal désiré pour deux secondes. Sélectez banque et position avec le contrôleur à quatre voies. Tapez le bouton du canal encore une fois et si la lumière du canal clignote, le preset a été enregistré. Comment fonctionne Boost sur mon ampli Spider ? Spider I, II et III : Maintenez enfoncé le bouton Top/Tempo et tournez Drive au maximum, si la lumière B s’allume, Boost est active. Spider IV : Poussez l’encodeur Presets et utilisez les flèches gauche et droite pour sélecter Boost. Maintenant vous pouvez activer Boost, augmenter et diminuer la quantité du Boost (jusqu’à 8db) et sélecter Pre et Post. Boost peut être activé avec le bouton Function 1 sur le FBV Shortboard MkII et avec le bouton Effects Loop pour le FBV Shortboard MkI. Comment est-ce que Noise Gate fonctionne ? Spider III : Maintenez enfoncé Tap et tournez Reverb au maximum. Cet allumera le Noise Gate. Si vous faites ça, le LED du canal D s’allume. Spider IV : Tapez l’encodeur Presets et utilisez les flèches gauche et droite pour sélecter Gate. Maintenant, vous pouvez choisir Off, Gate, Noise Reduction ou Gate + Noise Reduction. Utilisez les flèches haut et bas pour sélecter Threshold et Decay que vous pouvez ajuster avec l’encodeur Presets. Y a-t-il la possibilité de contrôler des répétitions de l’Effect Mix qui sont produits par l’effet Delay ? Spider I, II et III : Nous avons essayé de garder ces modèles aussi simple que possible. Ce n’est pas possible de changer cette fréquence. Spider IV : Poussez l’encodeur Presets, choisissez FX3 et utilisez les flèches pour choisir FdBk. Ici vous pouvez augmenter et diminuer cette fréquence en tournant le bouton Preset. Le delay se lance automatiquement si j’utilise un preset spécifique, comme puis-je arrêter ca ? Spider I, II et III : Vous pouvez désactiver auto-FX en allumant le Spider et maintenant enfoncé canal D/Insane en même temps. Si vous rallumez l’appareil, auto-FX ce lance aussi. Si vous voulez désactiver cette fonction en permanence, vous pouvez éteindre le bouton SmartFX et maintenir le bouton d’un canal jusqu’à ce qu’il clignote. Spider IV : Poussez Presets et utilisez les flèches gauche/droite pour choisir autoFX. Pourquoi est-ce que la lumière Tap Tempo clignote toujours ? Spider I, II et III 75-150 : Cette lumière vous montre la vitesse du delay même s’il n’est pas active. Vous ne pouvez pas le désactiver. Spider IV 75-150 : Vous pouvez assigner cette lumière aux effets. Elle montre la vitesse de l’effet. Poussez Presets et choisissez votre effet. Et trouvez Tap. Vous pouvez désactiver et activer Top ici avec l’encodeur Preset. Utilisez les flèches gauche/droite pour choisir Setup. Maintenant vous pouvez aussi chercher pour Taplite et désactiver la lumière en tournant l’encodeur Preset. Puis-je connecter mon ampli Spider combo (15, 30, 75, 120) à un baffle externe ? Non, parce qu’il y en a aucun jack pour un baffle externe. La combo Spider 150 a deux sorties pour un haut-parleur externe avec 8 ohms. Cette option assourdie les haut-parleurs intégrés. Line 6 Head and Cabinet Connections Comment puis-je enregistrer le signal de l’ampli Spider directement dans mon ordinateur? Vous pouvez utiliser le jack de casques comme Line Out pour enregistrer votre ampli Spider dans n’importe quelle entrée Line de votre ordinateur pour une connexion, vous avez besoin d’un câble 1/4’’ mâle stéréo à jack 1/8’’ mâle stéréo pour connecter à la carte son du ordinateur. Ça fonctionne avec la plupart des cartes sons parce qu’une plupart de ces cartes ont une entrée 1/8’’. Si vous avez une interface audio ou carte son professionnelle avec plusieurs entrée 1/4", vous avez besoin d’un câble 1/4" stéréo à 2x 1/4’’ mono pour recevoir du audio stéréo. Faites attention au niveau de sortie de l’ampli pour recevoir du audio propre et sans bruit. Si vous mettez le niveau de sortie de l’ampli trop fort, le son sera déformé. Mettez le niveau trop faible et le son sera bruyant. La dernière chose que vous avez besoin est un logiciel d’enregistrement audio pour l’ordinateur. Y a-t-il la possibilité d’utiliser une sortie jack sans désactiver les haut-parleurs ? Malheureusement pas. Puis-je utiliser un pédale effet ou processeur externe avec l’ampli Spider ? Les pédales effets fonctionneront presque toujours bien avec les amplis Spider mais ne mettez le niveau de pédale trop fort pour ne pas surcharger l’entrée de l’ampli. Les processeurs en rack souvent ne sonnent pas bien dans un ampli. Puis-je utiliser un contrôleur MIDI avec un ampli Spider ? Les amplis Spider n’ont aucune connexion MIDI. Seulement le Spider Valve Mark II a des connecteurs MIDI. Nous recommandons d’utiliser le contrôleur correct de Line 6 avec les amplis Spider. Ont-ils on Effects Loop ? Non, les amplis Spider I, II, III et IV n’ont pas de Effects Loop mais les amplis Spider Valve ont un Loop. Puis-je éditer ou sauvegarder mes sons sur mon ordinateur ? Vous pouvez faire tous ca sur le Spider IV avec le logiciel Spider IV Edit. Vous devez éditer les sons des autres amplis directement sur l’ampli. Spider IV Edit (v1.02) FAQs Quels contrôleurs fonctionnent avec mon Spider? Compatibilité avec des contrôleurs Ou puis-je acheter des remplacements ? Line 6 Store
  15. Français Deutsch Q: What are the input connections for the Spider Cabinet? A: The left or right input (single cable) connection is 4 ohms, with all four (4) speakers active. When both cables are used there will be an 8 ohm load on each side, using two (2) speakers for each side. Q: How should the Spider head be connected to the Spider cabinet? Spider II/III HD 75 - The HD75 is a mono head, which will have the same 75 watt/4 ohm total output when using one or two speaker cables between the head and cabinet. Spider II/III/IV HD 150: - The stereo outputs of the Spider 150 HD Series are rated at 8 ohms per side. You will need to connect both outputs of the head to both the Spider cabinet inputs. Be sure to use two (2) speaker cables to connect your head to your cabinet to ensure you have the correct ohm load. Be Careful not to use instruement cables to make this connection. Using instrument cables can produce a lower output volume than expected when the master is set between 6 and 9 o'clock, with the master volume is between 9 and 12 o'clock your signal can become extremely distorted, with the master volume at 12 o'clock or higher you will loose output all together. Be aware that the Spider cabinet jacks will produce an impedance of 4 ohms (either left or right jacks) when a single cable is connected, which will damage the Spider 150 HD. Q: Can I use other cabinets besides the Spider cabinet? A: Yes, the Spider HD and 150 (combo) series will work with any standard stereo 4x12 cabinet with two 8 ohm loads. Be aware that many guitar speaker cabinets will not have the flat response speakers found in Spider Cabinets, so the tone may be different than originally intended. A 16 ohm stereo cabinet will sound about 3dB quieter than an 8 ohm cab, but would not damage the Spider HD. A 4 ohm load on the other hand, will damage the Spider HD 150. Q: What are the speakers the Spider 4x12 cabinet? A: The Line 6 Spider cabinet uses four (4) 12" speakers rated at 16 ohm. The custom Celestion speaker manufactuered specifically for Line 6, but a common replacement speaker is the Celestion 70/80 speaker. Q: Is there a video where I can see the Spider Head and cabinet connections? Line 6 Head and Cabinet Connections Quels sont les entrées pour le Spider Cab? Les entrées gauche et droite sont 4 Ohms avec tous les haut-parleurs actifs (4). Les deux en même temps sont 8 Ohms avec 2 haut-parleurs par côté. Comment est-ce que je connecte la tête d’ampli avec le baffle Spider ? Spider II/III HD 75 Le HD75 est une tête d’ampli mono. Il a 75 watt à 4 ohms si vous utilisez 1 ou 2 câbles entre tête d’ampli et baffle. Spider II/III/IV HD 150 Les sorties stéréo du Spider 150 HD sont 8 ohms par côté. Vous devez brancher les deux sorties de la tête aux entrées du baffle. Utilisez 2 câbles haut-parleurs pour connecter la tête d’ampli au baffle. N’utilisez pas des câbles instruments. Les jacks du Spider baffle produisent une impédance de 4 ohms si un câble seul est connecté. Ce endommagera le Spider 150 HD. Puis-je utiliser des autres baffles ou seulement le Line 6 baffle ? Oui, Spider HD et 150(combo) fonctionnent avec tous les baffles standards stéréo 4x12 avec 8 ohms. Beaucoup de baffles guitares n’ont une réponse en fréquence plate comme les Spider IV. Un baffle 16ohms est plus ou moins 3dB plus faible qu’un baffle 8ohms mais cette configuration n’endommage pas le Spider HD. Attention, 4ohms endommageraient le HD 150. Quels haut-parleurs est-ce que vous installez dans le baffle 4x12 Spider? On utilise 4 hautparleurs de 12’’ à 16ohms. On installe des Celestion Custom, spécialement fabriqué pour Line 6 mais le Celestion 70/80 est le hautparleur de remplacement général. Y a-t-il une vidéo des connexions du Spider ? Line 6 Head and Cabinet Connections Was hat die Spider Box für Verbindungen? Der linke und rechte Eingang sind beide 4 Ohm bei allen 4 Lautsprechern angeschlossen. Wenn Sie beide Eingänge gleichzeitig benutzen, dann wird eine Impedanz von 8 Ohm auf beiden Seiten entstehen. 2 Lautsprecher pro Seite. Wie soll ich Spider Topteil mit Box verbinden? Spider II/III HD 75: Der HD75 ist ein mono Topteil, welches 75 Watt und 4 Ohm Ausgang hat wenn 1 oder 2 Kabel benutzt werden. Spider II/III/IV HD 150: Die Stereo Ausgänge das Spider HD 150 sind 8 Ohm pro Seite. Sie müssen beide Ausgänge an die Spider Box Eingänge anschliessen. Nutzen Sie dazu bitte nur Lautsprecherkabel und keine Instrumentkabel. Achtung, die Jacks werden eine 4 Ohm Impedanz produzieren wenn nur ein Kbale angeschlossen ist. Kann ich andere Boxen benutzen? Ja, Spider HD und 150(combo) werden mit den meisten 4x12 Verstärkern bei 8Ohm verschiedene. Aber achtung, diese Boxen haben oftmals keine Flachreaktioneszeit. Ein 16 Ohm Lautsprecher wird ca. 3dB leiser sein als 8Ohm aber sie werden den Verstärker auch nicht zerstören. Wenn aber 4 Ohm Ladung angeschlossen wird, wird das höchstwahrscheinlich den Spider HD 150 beeinflussen. Welche Lautsprecher sind eingebaut? Der Line 6 Spider Box mit 12‘‘ Lautpsrechern an 16 Ohm. Wir benutzen einen speziell für Line 6 hergestellten Celection Custom Lautsprecher. Die Celestion 70/80 ist ein verbreiteter Ersatzlautsprecher. Gibt es ein Video zur Verbindung des Topteils und der Box? Line 6 Head and Cabinet Connections
×
×
  • Create New...