Search the Community
Showing results for tags 'spider v'.
-
I got my spider v 20 today and used it for about an hour, Then I plugged some headphones in and played for a while longer and shut it off. I unplugged everything before turning it off and when I tried to play it again the speaker was muted. It does work with my headphones in and all the presets still work. I turned it off and on again tried to reset it, I’m not sure if I actually did reset it, I unplugged and replugged everything twisted the knobs around. I don’t have the iOS camera adapter to use the spider v remote so if I am supposed to fix it through that I don’t really know how.
-
I got my Spider V MKII back in August of 2021, and one of the reasons I got it was because of the Spider V Remote app, so I could get a lot of tones and effects. The app worked the first day I had the amp, but the next day when I plugged my amp into my Windows 10 computer, it said "No Device Connection." And now it has been like that for four months. I have done everything that I could possibly do: update drivers, try it on different computers, etc. I have also tried my IOS device, and my Mac laptop. Neither worked either. The only thing that I haven't done is update my amp, which I can't do because the Line 6 Updater app doesn't notice that my app is connected. I have submitted a ticket, but am not confident that it will make any difference, since I have seen that others have submitted tickets in regards to this problem, and nothing has changed. It seems that the last update for Spider V Remote was in 2019, which is a long time for fixes. It honestly seems to me that Line 6 doesn't really care, or else they would have done something. Any help would be greatly appreciated. -
I just bought spider v 30 mkii and i installed Cubase LE AI 11 but i can't set it up to work. I want to record with it. Here is how the program looks like.
-
The Vetta II technology has been time-tested and is still well respected today. Sure, the Helix has been our flagship technology for the last five years, but I'm curious to hear if Line 6 plans to keep building products based on the Vetta II technology. Amongst other products, the PodXT, the Amplify and the Spider V all share the same Vetta II algorithms. But there's features unique to a PODX3 that cannot be replicated in a Spider V and viceversa. Would a stereo version of the Spider Jam --perhaps featuring dual signals-- sell well these days? I really think it would --at the right price! Thoughts?
-
Does anyone have a suggested setting for the lead guitar in That Thing You Do by The Wonders (The Oneders! )
-
Please help if anyone knows. I have a Flextone II HD and am looking for a compatible cabinet for the cabinet modeling. I can't find any of the original flextone cabs kicking around. Will the spider V cabinets work and still allow cabinet modeling? If not any recommendations? I am currently running it through a mesa 2x12 cab but cabinet modeling doesn't sound right. Thanks! -
Hi, I've just got a new Spider V 20 MkII as an upgrade to my Spider III. I was surprised and disappointed to hear the loud buzzing and high-pitched whine coming from the amp on all settings except clean. My Spider III is completely silent on all modes, including INSANE. The Spider V is pretty much unusable because of the noise emitted when there is no significant input from a guitar. I have tried changing guitars, changing instrument cables, using different power sockets, moving to different rooms, but nothing seems to improve it. I can remove a lot of the noise using the Spider Remote noise gate and adjusting gains, but I don't see why that should be necessary with out of the box, factory preset tones. Is there something wrong with my Spider V amp or is this just something this amp does? Any help in getting rid of this unwanted buzz and whine is appreciated. Thanks
-
Hello, i just recently purchased a variax-jtv 69s from sweetwater. I am currently using a Spider V with the FBV 3 foot board. I'm wondering if is possible to control the variax from the FBV3 like the helix floor can? Thank you. -
How can i make a factory reset on my spider V 20?, because i dont saved a backup file (.svl6p) of factory presets, THANKS
-
I would like to know if there is a remote app that I can use to edit tones on my Spider V 240HC head for windows 10 OS. I used to have an older remote app that worked, however it recently stopped working. I have it for my iphone however it would make more sense to have it on my PC so I can edit tones while I record.
-
Quite enjoying the Spider V with the mkII update but the Spider Remote app while great seems to have some options that are merely an afterthought or simply missing functionality altogether. Some quality of life updates to the remote would be nice because it is basically a practice amp -- for most if not all owners -- that is used from the comfort of our couch. Being able to use a mouse/smartphone/tablet to do these things would be nice; This is not just about me being lazy, well maybe a little but I am also thinking about users that don't have that kind of mobility that would like to have some ease of usage. Anyway, the things that would be nice to make this app more complete; Starting/stopping or changing the metronome needs to be done from the unit (Yet, there seems to be this lost option on v2.0 that allows changing the metronome speed) The looper can only be triggered via the unit or a FBV pedal (Yes. I get that this is an incentive to get a pedal, but for the practice amp usecase it is overkill. At the very least can there be support for the FBV2 where long pressing switch 1 and 2 triggers the tuner and toggles the metronome respectively? Being able to trigger the tuner from the app The built-in drum loops can only be triggered or altered from the unit itself (AFAIK this can't be done with the FBV either)
-
Hello Line6 Community, I am trying to load presets from Customtone and the Cloud tab like before, but now it gives me this error "Failed to load the preset. Please try again." I have the latest update for Spider Remote and my amp(Spider V 30). If somebody knows any fix i'll be glad to hear it. Thanks for advance !
-
My Spider v Remote software (v2.00) on the pc (win10) comes up with the " no internet access detected" aprox every 30 sec, sometimes it comes so often i cant even type in my login info because it resets it with the error message. Its driving me nuts, is there a fix for this problem ?? \Ture
-
Would it be possible to browse custom tones by sorting them by tags, like genre or type, without having to search? I feel like having to guess key words really limits the ability to share original patches with the Spider V Community. For instance, I would like to try to find off the wall and weird experimental / ambient like patches. If i type in ambient, only the people who uploaded their contribution using that tag, would i only then get a match. If someone chose the word trippy, and I typed in groovy instead, we don't have a match. I just think the ability to browse the tones vs having to search for them, hoping luck is on your side. Great amp otherwise, my only gripe is the wireless g10 dongle squealing when it gets plugged into any of my active guitars. (I read the active setups trick the dongle into thinking it is charging? Who knows, that is for another thread.) Thanks in advance!!-
- 2
-
-
- feature request
- feature suggestion
- (and 2 more)
-
Desplázate hacia abajo para ver las instrucciones en español. Faites défiler la page vers le bas pour trouver des instructions en français. Anweisungen auf Deutsch finden Sie weiter unten. Per le istruzioni in Italiano scorrete verso il basso. Overview: For those who have access to a Spider V (MKI or MKII) amp and wish to update the G10T Transmitter, it must be done in the order shown below (first update the amp, then the G10). We strongly suggest updating the amp with the latest version of the Line 6 Updater from a desktop/laptop computer, even though it is possible to update the amp from a mobile device. Video Tutorial: Updating a Relay-Ready Spider V Amp and G10T Transmitter With a Mac Computer Video Tutorial: Updating a Relay-Ready Spider V Amp and G10T Transmitter With a Windows Computer I. Update the Spider V Amp Firmware With a Computer First, (for Windows users) download and install the Spider V drivers Go to Line6.com and click on "Support" Select "Downloads" and set the three pulldown windows under "Free Software Downloads" to: [Spider V 60], [Line 6 Drivers], [your PC OS] Click "GO" The page will update with the Line 6 drivers for the Spider V. Click 'GET DOWNLOAD' to download the driver installer to your computer. Log in to your free Line 6 User account (or create a new account) Click on 'ACCEPT AND DOWNLOAD' and follow the instructions to save the driver installer When the installer has been downloaded, double-click on it and follow the instructions to install it in your computer Next, download and install the Line 6 Updater for Spider V Go to Line6.com and click on "Support" Select "Downloads" and set the three pulldown windows under"Free Software Downloads" to: [spider V 30], [Line 6 Updater], [your Mac or PC OS] Click "GO" The page will update with the Line 6 Updater for the Spider V. Click 'GET DOWNLOAD' to download the updater program to your computer. Click on 'ACCEPT AND DOWNLOAD' and follow the instructions to save the updater installer When the program has been downloaded, double-click on it and follow the instructions to install it in your computer Lastly, update the Spider V amp Connect the Spider V’s USB port to your computer with a traditional USB cable Slide the "SELECT" switch to the USB port labeled Mac/PC Turn the amp on Open the Line 6 Updater application and sign in with your Line 6 User Account Click on the Spider V amp Click the “Update” button next to the latest firmware version at the top Follow the prompts to begin the update process Do not turn off or unplug your Spider V or computer during the update Watch for the update status to be completed on the Spider V LCD. Once completed, the amp will restart. Disconnect and reconnect the USB cable, then repeat the process for the G10T Transmitter Note: If you experience a failed update or your amp locks up during boot up, you can hold down the Amp and FX buttons to enter Update Mode. Once it's in Update Mode, attempt the update procedure again. II. Update the G10T Firmware with the Spider V Amp Make sure the Spider V amp is still connected to the computer, and that the computer is still connected to the internet Insert the G10T all the way into the Spider's Input jack Ensure that the "SELECT" switch is still engaged with the USB port labeled "Mac/PC". Turn on your Spider amp if it's off. Run the Line 6 Updater program. Sign in to your Line 6 User Account. Click on “Relay G10T” Click the “Update” button next to the latest firmware version. Follow the prompts to begin the update process. Important: Do not turn off or unplug your Spider V amp or computer during the update. The Updater will say the amp is resetting, but take note of the amp's display, as it will continue updating, ultimately showing "Part 1 of 1 100% Updating Transmttr". The amp will reset itself, ending the update process. Cómo actualizar el firmware del transmisor G10 mediante los amplificadores Spider V Descripción general: Aquellos usuarios que dispongan de un amplificador Spider V (MKI o MKII) y deseen actualizar el transmisor G10T, el proceso debe realizarse en el orden indicado a continuación (primero actualizar el amplificador y luego el G10). Recomendamos encarecidamente actualizar el amplificador con la última versión del Line 6 Updater desde un ordenador de sobremesa/portátil, aunque puede hacerse desde un dispositivo móvil. Tutorial en vídeo: Actualizar un transmisor G10T y un amplificador Spider V compatible con Relay con un ordenador Mac Tutorial en vídeo: Actualizar un transmisor G10T y un amplificador Spider V compatible con Relay con un ordenador Windows I. Actualizar el firmware del amplificador Spider V con un ordenador En primer lugar, (para usuarios de Windows) descarga e instala los controladores del Spider V Visita Line6.com y haz clic en [Soporte] Selecciona “Downloads” y, en las tres ventanas desplegables de “Free Software Downloads”, selecciona “Spider V 60”, “Line 6 Drivers”, “el sistema operativo de tu PC”. Haz clic en [GO]. La página se actualizará con los controladores de Line 6 para el Spider V. Haz clic en [GET DOWNLOAD] para descargar el instalador del controlador en tu ordenador. Inicia sesión en tu cuenta de usuario gratuita de Line 6 (o bien crea una cuenta nueva). Haz clic en [ACCEPT AND DOWNLOAD] y sigue las instrucciones para guardar el instalador del controlador. Una vez descargado el instalador, haz doble clic en él y sigue las instrucciones para instalarlo en tu ordenador. A continuación, descarga e instala el Line 6 Updater para Spider V Visita Line6.com y haz clic en [Soporte]. Selecciona “Downloads” y, en las tres ventanas desplegables de “Free Software Downloads”, selecciona “Spider V 30”, “Line 6 Updater”, “el sistema operativo de tu Mac o PC”. Haz clic en [GO]. La página se actualizará con el actualizador Line 6 para el Spider V. Haz clic en [GET DOWNLOAD] para descargar el programa del actualización en tu ordenador. Haz clic en [ACCEPT AND DOWNLOAD] y sigue las instrucciones para guardar el instalador del actualizador. Una vez descargado el programa, haz doble clic en él y sigue las instrucciones para instalarlo en tu ordenador. Por último, actualiza el amplificador Spider V Conecta el puerto USB del Spider V a tu ordenador con un cable USB tradicional. Desliza el conmutador SELECT hasta el puerto USB marcado como Mac/PC. Activa el amplificador. Abre la aplicación Line 6 Updater e inicia sesión con tu cuenta de usuario de Line 6. Haz clic en el amplificador Spider V. Haz clic en el botón [Update] situado junto a la última versión del firmware en la parte superior. Sigue las instrucciones para empezar el proceso de actualización. No desactives ni desconectes tu Spider V ni el ordenador durante la actualización. Consulta el estado de la actualización en la pantalla LCD de Spider V. Una vez completada, el amplificador se reiniciará. Desconecta y vuelve a conectar el cable USB; a continuación, repite el proceso para el transmisor G10T. Nota: Si falla la actualización o si tu amplificador se bloquea durante el arranque, puedes mantener pulsados los botones AMP y FX para entrar en el modo Update. Una vez en el modo Update, intenta realizar nuevamente el procedimiento de actualización. II. Actualizar el firmware del G10T con el amplificador Spider V Comprueba que el amplificador Spider V sigue conectado al ordenador y que éste sigue conectado a Internet. Inserta totalmente el G10T en el jack de entrada del Spider. Comprueba que el conmutador SELECT sigue conectado al puerto USB marcado como “Mac/PC”. Activa el amplificador Spider si está desactivado. Ejecuta el programa Line 6 Updater. Inicia sesión en tu cuenta de usuario de Line 6. Haz clic en [Relay G10T]. Haz clic en el botón [Update] situado junto a la última versión del firmware. Sigue las instrucciones para empezar el proceso de actualización. Importante: No desactives ni desconectes tu amplificador Spider V ni el ordenador durante la actualización. El Updater notificará que el amplificador se está reiniciando, pero observa la pantalla del amplificador, ya que continuará actualizándose y, al final, mostrará “Part 1 of 1 100% Updating Transmttr”. El amplificador se reiniciará, finalizando el proceso de actualización. Mise à jour du système de l’émetteur G10 via les amplis Spider V Aperçu: Si vous disposez d’un ampli Spider V (MKI ou MKII) et souhaitez mettre l’émetteur G10T à jour, suivez impérativement l’ordre indiqué ci-dessous (mise à jour de l’ampli avant celle du G10). Nous recommandons vivement de mettre l’ampli à jour avec la dernière version de l’application Line 6 Updater à partir d’un ordinateur fixe ou portable même s’il est possible de le faire à partir d’un dispositif mobile. Tutoriel vidéo: Mise à jour d’un ampli Spider V compatible Relay et d’un émetteur G10T avec un ordinateur Mac Tutoriel vidéo: Mise à jour d’un ampli Spider V compatible Relay et d’un émetteur G10T avec un ordinateur Windows I. Mise à jour du système de l’ampli Spider V avec un ordinateur (Pour utilisateurs Windows) Commencez par télécharger et installer les pilotes Spider V. Rendez-vous sur Line6.com et cliquez sur [Assistance]. Sélectionnez «Downloads» et réglez les trois menus déroulants sous «Free Software Downloads» sur «Spider V 60», «Line 6 Drivers», «le système de votre ordinateur». Cliquez sur [GO]. La page affiche les pilotes Line 6 pour le Spider V. Cliquez sur [GET DOWNLOAD] pour télécharger l’installeur de pilote sur votre ordinateur. Connectez-vous à votre compte utilisateur Line 6 gratuit (ou créez un compte). Cliquez sur [ACCEPT AND DOWNLOAD] et suivez les instructions pour sauvegarder l’installeur de pilote. Quand l’installeur est téléchargé, double-cliquez dessus et suivez les instructions pour l’installer sur votre ordinateur. Ensuite, téléchargez et installez l’application Line 6 Updater pour Spider V. Rendez-vous sur Line6.com et cliquez sur [Assistance]. Sélectionnez «Downloads» et réglez les trois menus déroulants sous «Free Software Downloads» sur «Spider V 30», «Line 6 Updater», «votre système Mac ou PC». Cliquez sur [GO]. La page affiche l’application Line 6 Updater pour le Spider V. Cliquez sur [GET DOWNLOAD] pour télécharger l’application de mise à jour sur votre ordinateur. Cliquez sur [ACCEPT AND DOWNLOAD] et suivez les instructions pour sauvegarder l’installeur de l’Updater. Quand le programme a été téléchargé, double-cliquez dessus et suivez les instructions pour l’installer sur votre ordinateur. Pour finir, mettez l’ampli Spider V à jour Branchez la prise USB du Spider V à votre ordinateur avec un câble USB conventionnel. Faites glisser le commutateur SELECT sur le port USB Mac/PC. Mettez l’ampli sous tension. Ouvrez l’application Line 6 Updater et identifiez-vous avec votre compte utilisateur Line 6. Cliquez sur l’ampli Spider V. Cliquez sur le bouton [Update] à côté de la version la plus récente du système en tête de liste. Suivez les instructions pour lancer la mise à jour. N’éteignez pas et ne débranchez pas le Spider V ou l’ordinateur durant la mise à jour. Surveillez l’évolution de la mise à jour sur l’écran LCD du Spider V. A la fin, l’ampli redémarre. Débranchez et rebranchez le câble USB puis recommencez l’opération pour l’émetteur G10T. Remarque: Si la mise à jour échoue ou si votre ampli se bloque durant le redémarrage, maintenez les boutons AMP et FX enfoncés pour passer en mode Update. Une fois en mode Update, recommencez la procédure de mise à jour. II. Mise à jour du système du G10T avec l’ampli Spider V Vérifiez que l’ampli Spider V est toujours connecté à l’ordinateur et que l’ordinateur est toujours connecté à internet. Insérez le G10T à fond dans la prise Input du Spider. Vérifiez que le commutateur SELECT est toujours réglé sur le port USB Mac/PC. Allumez l’ampli Spider s’il est éteint. Lancez l’application Line 6 Updater. Identifiez-vous avec votre compte utilisateur Line 6. Cliquez sur [Relay G10T]. Cliquez sur le bouton [Update] à côté de la version la plus récente du système. Suivez les instructions pour lancer la mise à jour. Important: N’éteignez pas et ne débranchez pas le Spider V ou l’ordinateur durant la mise à jour. L’Updater signale que l’ampli se réinitialise mais surveillez l’écran de l’ampli qui finira par afficher «Part 1 of 1 100% Updating Transmttr». L’ampli se réinitialise alors, concluant ainsi la mise à jour. Firmware-Aktualisierung des G10-Senders mit einem Spider V-Verstärker Vorweg: Wer Zugriff auf einen Spider V (MKI oder MKII) Verstärker hat und seinen G10T-Sender aktualisieren möchte, muss in der nachfolgend beschriebenen Reihenfolge vorgehen (erst der Amp, dann der G10). Wir möchten Ihnen ans Herz legen, den Verstärker mit der aktuellen Line 6 Updater-Version von einem Computer/Laptop aus zu aktualisieren, wenngleich dies auch mit einem Mobilgerät möglich ist. Video-Tutorial: Aktualisieren eines Relay-fähigen Spider V-Verstärkers und des G10T-Senders mit einem Mac-Computer Video-Tutorial: Aktualisieren eines Relay-fähigen Spider V-Verstärkers und des G10T-Senders mit einem Windows-Computer I. Aktualisieren der Spider V-Verstärker-Firmware mit einem Computer (Für Windows-Anwender:) Laden Sie sich die Spider V-Treiber herunter und installieren Sie sie Surfen Sie zu Line6.com und klicken Sie auf [Support]. Wählen Sie “Downloads” und mit den drei Listenfenstern unter “Free Software Downloads” zunächst “Spider V 60”, dann “Line 6 Drivers” und Ihr Computer-Betriebssystem. Klicken Sie auf [GO]. Jetzt werden die Line 6-Treiber für die Spider V-Amps angezeigt. Klicken Sie auf [GET DOWNLOAD], um sich den Treiber herunterzuladen. Loggen Sie sich in Ihr Line 6-Benutzerkonto ein (oder legen Sie sich ein Konto an). Klicken Sie auf [ACCEPT AND DOWNLOAD] und befolgen Sie die Hinweise zum Sichern des Installationsprogramms. Doppelklicken Sie auf das heruntergeladene Installationsprogramm und befolgen Sie die Hinweise für die Installation auf dem Rechner. Laden Sie sich jetzt den “Line 6 Updater” für den Spider V herunter Surfen Sie zu Line6.com und klicken Sie auf [Support]. Wählen Sie “Downloads” und mit den drei Listenfenstern unter “Free Software Downloads” zunächst “Spider V 30”, dann “Line 6 Updater” und Ihr Computer-Betriebssystem. Klicken Sie auf [GO]. Jetzt werden die Line 6 Updater-Treiber für die Spider V-Amps angezeigt. Klicken Sie auf [GET DOWNLOAD], um sich das Updater-Programm herunterzuladen. Klicken Sie auf [ACCEPT AND DOWNLOAD] und befolgen Sie die Hinweise zum Sichern des Updaters. Doppelklicken Sie auf das heruntergeladene Programm und befolgen Sie die Hinweise für die Installation auf dem Rechner. Aktualisieren Sie Ihren Spider V-Verstärker Schließen Sie den USB-Port des Spider V mit einem geeigneten Kabel an den Computer an. Schieben Sie den SELECT-Schalter zum USB-Port mit der Beschriftung “Mac/PC”. Schalten Sie den Verstärker ein. Öffnen Sie den “Line 6 Updater” und loggen Sie sich in Ihr Line 6-Konto ein. Klicken Sie auf [Spider V]. Klicken Sie auf den [Update]-Button neben der aktuellen Firmware-Version (ganz oben). Befolgen Sie die Anweisungen, um die Aktualisierung zu starten. Schalten Sie den Spider V bzw. Computer bei laufender Aktualisierung nicht aus und lösen Sie nie die Verbindung. Das LC-Display des Spider V informiert über den Fortgang der Aktualisierung. Am Ende des Vorgangs wird der Amp neu gestartet. Lösen Sie die USB-Verbindung und Wiederholen Sie den Vorgang für den G10T-Sender. Anmerkung: Wenn die Aktualisierung fehlschlägt oder der Verstärker beim Hochfahren hängen bleibt, können Sie den AMP- und FX-Taster gedrückt halten, um in den Update-Modus zu wechseln. Wiederholen Sie die Aktualisierung im Update-Modus noch einmal. II. Aktualisieren der G10T-Firmware mit dem Spider V-Verstärker Der Spider V-Verstärker muss noch mit dem Computer verbunden sein – und der Rechner muss einen Internetzugang haben. Schieben Sie den G10T komplett in die INPUT-Buchse des Spider. Schieben Sie den SELECT-Schalter zum USB-Port namens “Mac/PC”. Schalten Sie den Spider-Verstärker bei Bedarf ein. Starten Sie “Line 6 Updater”. Loggen Sie sich in Ihr Line 6-Benutzerkonto ein. Klicken Sie auf [Relay G10T]. Klicken Sie auf den [Update]-Button neben der aktuellen Firmware-Version. Befolgen Sie die Anweisungen, um die Aktualisierung zu starten. Wichtig: Schalten Sie den Spider V bzw. Computer bei laufender Aktualisierung nicht aus und lösen Sie nie die Verbindung. Der “Updater” zeigt an, dass der Verstärker zurückgestellt wird. Im Display des Amps wird der Fortgang der Aktualisierung angezeigt und wenig später “Part 1 of 1 100% Updating Transmttr”. Der Verstärker wird schließlich zurückgestellt – die Aktualisierung ist beendet. Come Aggiornare il Firmware del Trasmettitore G10 tramite Amplificatori Spider V Panoramica: Coloro che hanno a disposizione un ampli Spider V (MKI o MKII) e vogliono aggiornare il Trasmettitore G10T, dovranno farlo seguendo l’ordine indicato qui di seguito (prima aggiornare l’ampli, poi il G10) Sebbene sia possibile farlo anche da dispositivo mobile, vi consigliamo vivamente di aggiornare l’ampli con l’ultima versione del Line 6 Updater da un computer desktop/laptop. Tutorial Video: Aggiornare un Ampli Spider V Relay-Ready e un Trasmettitore G10T Con un Computer Mac Tutorial Video: Aggiornare un Ampli Spider V Relay-Ready e un Trasmettitore G10T Con un Computer Windows I. Aggiornare il firmware di un Ampli Spider V Con un Computer Prima di tutto, (per utenti Windows) scaricate e installate i driver dello Spider V Andate su Line6.com e cliccate su [Support] Scegliete “Downloads” e selezionate nei tre menu a discesa di “Free Software Downloads” “Spider V 60”, “Line 6 Drivers” e “sistema operativo del vostro PC”. Cliccate [GO]. La pagina si aggiornerà con i driver Line 6 per lo Spider V. Cliccate [GET DOWNLOAD] per scaricare sul vostro computer l’installer del driver. Loggatevi con il vostro account gratuito Line 6 (o create un nuovo account). Cliccate [ACCEPT AND DOWNLOAD] (Accetta e Scarica) e seguite le istruzioni per salvare l’installer del driver. Quando l’installer è stato scaricato, per installarlo sul vostro computer fate doppio click su di esso e seguite le istruzioni. Poi, scaricate e installate Line 6 Updater per lo Spider V Andate su Line6.com e cliccate su [Support]. Scegliete “Downloads” e selezionate nei tre menu a discesa di “Free Software Downloads” “Spider V 30”, “Line 6 Updater” e “sistema operativo Mac o PC”. Cliccate [GO]. La pagina si aggiornerà con l’Updater Line 6 per lo Spider V. Cliccate [GET DOWNLOAD] per scaricare sul vostro computer il programma di aggiornamento (Updater). Cliccate [ACCEPT AND DOWNLOAD] (Accetta e Scarica) e seguite le istruzioni per salvare l’installer dell’Updater. Quando il programma è stato scaricato, per installarlo sul vostro computer fate doppio click su di esso e seguite le istruzioni. Infine, aggiornate l’ampli Spider V Collegate la porta USB dello Spider V al computer con un normale cavo USB. Spostate il selettore SELECT sulla porta USB contrassegnata con Mac/PC. Accendete l’ampli. Aprite l’applicazione Line 6 Updater e registratevi con il vostro Account Line 6. Cliccate sull’ampli Spider V. Cliccate il pulsante [Update] in alto vicino all’ultima versione del firmware. Per iniziare l’aggiornamento seguite le istruzioni. Durante l’aggiornamento non spegnete né scollegate lo Spider V o il computer. Verificate sull’LCD dello Spider V che l’aggiornamento sia completato. Al termine, l’ampli si riavvierà. Scollegate e ricollegare il cavo USB, poi ripetete il procedimento per il Trasmettitore G10T. Nota: Se l’aggiornamento non va a buon fine o l’ampli si blocca all’accensione, tenete premuti i pulsanti AMP e FX per entrare in modalità Update. Una volta in modalità Update, eseguite di nuovo la procedura di aggiornamento. II. Aggiornare il firmware del G10T con l’Ampli Spider V Assicuratevi che l’ampli Spider V sia ancora collegato al computer e che il computer sia collegato ad internet. Inserite completamente il G10T nel jack di ingresso dello Spider. Assicuratevi che il selettore SELECT sia ancora posizionato sulla porta USB contrassegnata “Mac/PC”. Accendete il vostro Ampli Spider, se è spento. Lanciate il programma Line 6 Updater. Eseguite il login al vostro Account Line 6. Cliccate su [Relay G10T]. Cliccate il pulsante [Update] vicino all’ultima versione del firmware. Per iniziare l’aggiornamento seguite le istruzioni. Importante: Durante l’aggiornamento non spegnete né scollegate lo Spider V o il computer. L’Updater indicherà che l’ampli si sta resettando, ma voi guardate lo schermo dell’ampli, che continuerà l’aggiornamento, finché al termine scriverà “Part 1 of 1 100% Updating Transmttr”. L’ampli si resetterà, terminando il procedimento di aggiornamento. -
Hi, all. I've been trying to update my Spider V, but when I open the Updater and log in, I get the "Please select your device" prompt, but it won't show. In fact, I also have an old GearBox (GX1?) connected and it doesn't see that either. I have the latest version of Updater (1.18) and am running Windows 10 Home 64-bit. Can someone solve this for me, please? Thanks. P.S. I've also verified that my amp is registered and shows in my L6 account. Never mind. I'm a dumbass. Kids, remember to flip the little switch in back that goes from iOS to Android if you have an iPhone, but a Windows computer :/
-
I have a spider v 240hc. Looking at a Harley Benton 212 cabinet. Cab specs are 120w @ 8ohn mono and 60w @ 16ohm stereo. Can I safely plug in without damaging my amp? I am almost certain it ok but want to double check. Really don't want a 412 at this time. Also if it does hook up will or how much power/quality will I lose? side question. Is the wireless system ok with active pu?
-
I apologize if this topic already exists in the forum. I was searching on how to set up tone/volume in chain: TL guitar, SpiderV 30 & Cubase at PC. I didn't find the answer in Forum. My Spider V 30 is connected correctly to PC via USB and there is a sound of TL in Cubase. In Cubase, I choosed ASIO Spider V driver. I/O is Speder V (L&R) - Active. ASIO buffer Size is set to: Extra Small. I can record my TL from SpiderV 30 via USB and reproduce my records, too. It is not a problem, it works. But, quality of record is desperate and not acceptable, too. The sound is dark, blurry, somehow smudged and does not match what I hear on Spider V 30 while playing & recording. E.g effect as drive is not OK and corrupts the recorded. This is especially pronounced when I strumming all the strings. When I am playing finger style in clear sound or near clear, it is a better. It seams to me that solution is to set properly the tone on all devices in the chain: TL guitar, SpiderV 30 & Cubase at PC. Acctually to set properly the tone/volume of input signal to PC or output signal from Spider V 30 via USB. When I am playing acoustic guitar via USB Audio Interface (UAI), I can adjust Input signal at UAI and all works fine. But at Spider V 30 there is not possibility to adjust Input signal. I can adjust tone at TL guitar as imput signal to SpiderV 30, but it changes a sound of guitar at SpiderV 30. Or I can reduce/decrease Master tone of SpiderV 30, but I can not hear what I am playing. Please, give me opinion regarding this topic. How to properly set up tone of all devices in chain: TL guitar, SpiderV 30 & Cubase at PC? What are your experiences with this? -
Can you set what bank is selected with the FBV Express MK2 pedal? Like say A is bank 32a (User 1) B is bank 32b (User2) etc so you can change banks while you are playing using the 240 HC cabinet?
-
It's probably been brought up before... but what would it take to get this Effect, added to the Spider V.... It seems to be the only effect that the Spider IV has that the Spider V does not? I saw there was a thing on IdeaScale for it, https://line6.ideascale.com/a/dtd/Add-Smart-Harmony-To-Spider-V/857958-23508#idea-tab-comments, ... This needs to be added. There is a Synth Harmony, but that is not the same....
-
I know there is a general topic for tones and what not. These really aren't tones. In fact they are a lack thereof. These is ideal for those who want to start from scratch or a basic starting point to craft their own sound, or are just too easily distracted by what you get packaged in the amp. Consider them blank canvases. Installation is simple. Just download them to your PC, If you have any tones currently loaded into your Amp, be sure to back them up. And then click "restore," and load the downloaded svl6a file. This will wipe everything saved on your amp, so be sure to back up your tones or banks if you wish to use them later. After you do this, the only way to recover will be to restore a backed up bank, or reset the Spider V back to factory settings, which will restore the factory tones only. I will be adding variations to this idea as time goes on. Here I've taken the liberty of replacing all the tones with the default settings for the USER tones. Basically it's an empty tone bank as the name implies. Spider V Blank Tone Bank.svl6a On this one I've basically emptied out the tone bank and placed all the amps in their own slots for quick navigation. I have done nothing to the settings for the amps themselves, these are the stock settings for them on the Spider V. Another nice starting point to get familiar with what is available on the Spider V. Surf through them easily, pick one and build your sound from there. Spider V Amp Starter Bank.svl6a This idea for this is basically the same as the Amp Starter, only this time we start with the Cabinets. It seemed kind of silly to just use up only 25 slots in the bank so I have included the four mic settings for each Amp. I know that for many it doesn't make much of a difference what mic you use, but they are in there for giggles. I think you need to have your cab Modeling switch to "On" in order for this to be of any use. Spider V Cab Starter Bank.svl6a
-
This isn't a request, this is actually a solution. Mind you the performance of your PC, will determine how usable it is. I am also pretty sure that this isn't news to some of you, I just haven't found anything yet on these forums detailing that someone else has done this. I have pictured, my desktop, with both the Windows version and the Android version (in a vbox emulator) running simultaneously. If you notice, the Android version (on the right) has usb OTG access to my 240 HC, while my PC version does not. This is because it won't let me share with usb access with the PC and the Vmachine to the same bus at the same time. When I shut down the Android emulation, it gives me USB access from the PC version. What this means is that I can download tones from the cloud, using the Android app, and by saving them to my tone bank in my Spider V, I can then shut down the Android app, and then edit said tone in Windows without having to change from a tablet/phone to my PC. Directions are forthcoming...
-
I was wondering if anyone knows for sure what level the XLR outputs are on the SPider V 240? Are they Mic level, Instrument level, or Line level?
-
Hello, in a recent firmware update for the spider V, a new option was added to the "Global Settings", that gives you the ability to use the phones output as a line output - independent of the internal speaker and the master volume knob. The spider V has also an AUX input jack, which doesn't go through the effects, but goes right into the speaker. In both output modes (line/phones) the aux input still goes into the output jack. It would be really good, if the AUX input could be routed only to the speaker and not to the output jack by another option in the "Global Settings". Could this be implemented through a firmware update? Is there any possibility Line 6 could release such a firmware update? Thanks for your time, Greenscreener -
Hello! I am very new to learning guitar, as well as all toys associated with it. I have a Spider V 120W, and just purchased a Firehawk FX. What is the best way to cable my Firehawk to my amp? Is the 4 cable method the best and/or only way? If I have the option to plug in to a sound board directly, can I just skip my amp, and plug my Firehawk via XLR directly to the board? Thank you so much for your help!! :)
