Search the Community
Showing results for tags 'switch'.
-
Hi everyone. I have a question, I want to use my Helix for guitar and vocals simultaneously. The thing is, it will be with two musicians, a guitarist who will be up and down, and me on vocals. The issue is that I would like to control various parameters of the vocals (delay, occasional echo, etc.), and not have to be aware of the pedalboard, which the guitarist will be using. I've thought about adding an external pedal, like a switch on/off, to assign those effects, and with my own two or three buttons, without having to be aware of the pedalboard. Do you know if this can be done? And if so, what pedal do you recommend? I need at least two buttons. Thank you.
-
Here is a quick guide on assigning dual momentary footswitch options to your HX Stomp or HX Stomp XL using the external switch jack: Global Settings > Preferences > Page 2 will show EXP FS Tip and EXP FS Ring. These setting should be assigned to FS4/FS7 and FS5/FS8 accordingly. Next menu item over: Global Settings > Footswitches > FS4(FS7) Function, FS5(FS8) Function assignment on page 2. These can be assigned to different functions such as Stomp buttons OR Preset up and down. HX Stomp Controllers & Snapshots video
-
If you are having trouble with your DL-4 MkII stompbox modeler, please try the following: - Use a different guitar, cables, and amp to make sure they are individually working correctly. - Remove all other pedals between your instrument and the amplifier. Ensure that: - The cables you are using to test work correctly by plugging directly from the instrument into the amplifier. - All jacks and nuts on the pedal are tight. - The unit is receiving sufficient power from the correct power supply (fresh batteries or a Line 6 DC-3g, DC-3h or DC-1g). Do not use old batteries to test pedals. - Reset the pedal by pressing the A and 'Tap' footswitches while inserting the power connector and powering on. Continue to hold the switches for approximately 8 seconds, until you see the green LEDs light up. - The last thing to try is to reinstall the firmware. Go to https://line6.com/software/index.html, choose "DL4 MkII" and "Firmware" from the menus, then follow the directions listed with the latest firmware entry. If you are still having difficulty you will need to have the unit repaired at an Authorized Service Center. All Line 6 Pedals carry a 12 month parts and labor warranty from the date of purchase from an Authorized Retailer. Please take a copy of the dated proof of purchase to ensure the warranty is covered. Product Repair Line 6 Product Warranty
-
Hello, This unit has always worked without any issue, but all of a sudden I connected it as usual and it didn't turn on. At the beginning I thought it was completely broken but because I was still hearing that click after turn it on, I tried connecting the USB to the computer and realized that it was working there as usual, and the effects too when connected to the amp. I've tried resetting and reinstalling the firmware but it's still the same. Have anyone experienced the same issue or something similar?
-
Hi all! I take my Helix back and forth from rehearsal space every week. When I'm not using my Helix as an audio interface, I got my Focusrite 2i2 hooked up to my monitors. Is there a way to more easily switch between the two than unplugging the audio cables from the Focusrite and plugging them in the Helix? Basically, can I hook up both my Focusrite and Helix to the same speakers, and switch as I need to? This way my Focusrite is always plugged in, and I can just plug in the Helix when I can and switch to it. How would I go about this? Cheers!
-
Hi, I have a Spider V 60 and I've just picked up a second hand Shortboard MkII. However som of the switches do not respond. I have googled away a few hours and find that it's a fairly common problem. I understand the solution but can't find the parts. On the old forum, someone posted the switch details as a 6mm TACTILE SWITCH, THRUHOL made by GC Electronics, part number PTS645SL43-P. Anyone know where I could find this switch or similar in the UK? I've looked on a few sites and there are lots of similar switches. As far as i can tell it is 6mm (is that 6mm x 6mm ?) On-Off switch rather than momentary but there still seems to be options. Help please! Thanks Pete -
My brand new Variax has had only intermittent success when I've used the switch to go from mags to modeling. Oftentimes it sticks when I use it, and sometimes I can depress it several times yet still the thing won't switch modes. This can happen while switching from/to either the modeling or the mags. I seem to notice a higher success rate if I remember to hold the switch down for a couple of seconds before releasing it. Other than the problem stated it seems properly installed, and it doesn't wobble or anything. Questions: Is the switch intended to operate in the manner described so as to curtail inadvertent switching while playing? If not, should I be worried? (It is still in the return period, so I could ship 'er back for a replacement model.) Is there a simple fix? THANKS in advance for your help! Mike
-
I've got a Line 6 Spider V 240HC with the matching 412 cab, and an FBV Express MKII foot controller. Im trying to figure out how to save certain amps to certain Letter Pedals. Like save cowboys from hell to a (or whichever) and save something clean, like acoustic rhythm, to another letter pedal, like b (or whichever) to where when im playing a show, i dont have to go back to my amp and switch from heavy to clean, especially when its quick changes in songs that cant be dragged out. Help is very much appreciated.
-
Dear Helix (floor) experts, I need your help, having an issue on the A/B-switch. I'll describe my setup first: I am using the helix (2.53) in dual mode: 1 signal path goes usually directly into FOH, the other one is used to feed my amp by 4-cable-method (4CM). That gives a nice, fat sound, like 3 rhythm guitarists playing unisono. In my setlist I use a preset for every single song we play and do the in-song-changing (amp channel and master volume [MIDI], FX etc.) with snapshots. Task & solution: -=-=-=-=-=-=-=-=-=- I am supposed to play the opener and I have 3 signal paths planned for this to get huge, spacey sounds out of my guitar and helix. One (path 2) is used for a synthesizer pad sound (no guitar signal in) by 3 OSC synth (XLR out into FOH). This one should not concern us anymore, works exactly as it should. The other signal path 1 (guitar input) is split up (A/B switch): Path 1A (above) is feeding the signal into a FX chain, the output goes directly into FOH (XLR left/right). Works fine, too. Path 1B of this signal path is going by SEND/RETURN 1 and some FX into my amp (1/4" out). This one works as well. The 4 snapshots and their sequence would be: 1: start with path 1A (FX - A/B switch = [A100%] - of course, with the brackets!!) 2: add path 2 (synth pad - identical to snapshot 1, just turning on the 3 OSC synth) 3: add path 1B (amp - identical to snapshot 2, just A/B switch turned to [even]) 4: finishing the opener with just path 1B active (only amp, nothing else - like snapshot 1, just with A/B switch adjusted to [B100%]). The problem: -=-=-=-=-=-=-=-=-=- Helix does not seem to be consistent with this A/B switch. It all works as intended until I get to reach snapshot 3. Once the A/B-switch has changed to [A/B even], it won't accept any other setting anymore (exception: snapshot 1). Means, it stays on [even], ignoring the individual path programming in snapshot 2 and 4. The display DOES show the original programming, but the DSP is simply ignoring it. Anyone got any idea, what exactly is the problem behind this and how it can be solved??? I am really puzzled here ...
-
Hi guys, I'm looking to find a way to activate wah just pushing the switch under the exp pedal (like in Boss Gt* pedalboards). By now, the only way I found, is to set wah on one of the switch, click on it and then go back to the exp pedal: too much time wasted! Anyone knows a faster way to set it? Thanks a lot, cheers!
-
So I use for Helix for more them half a year I think so I know how to use it and I know that to change between those two you need to step hard enough on the pedal, and it worked good till this monday. Now it does not change as good as it did. I have to push a lot harder and even when I do it doesn't switch in most of the times. And when it does there is also a problem that I see that it changes for a moment and then goes back like I pushed it twice(which, of course, didn't). Couldn't find anything on this topic by myself, so hope someone can help me with this.
-
Here is what I am looking for... I'd like to run two amps (one for clean tone, one for dirty tone w/ possible tube screamer), and be able to alternate between the two. Initially, I was thinking of running dual signal path for this, and then setting everything to the same switch (pressing the switch turns on dirty amp mod and tube screamer, and turns off clean amp and vice-versa), but I would need the unused path to be muted. I would assume the other way to do it (in the same patch) would be to run the amps in series. I am running a mono output, so I don't need stereo signals. I'd rather not have to set a different patch (in each block of 4) for each different tone in a song. And I would also be concerned about the delay between switching (the firehawk was a nightmare with this, I didn't keep it long...). I'm new to the PODHD world, and I've only been able to spend a few hours with the HD500x thus far. If anyone can give me good insight into how to set this up, I'd appreciate it. For a little more info, I'll be leaning towards the higher gain amps for my dirty tone (Fireball, Elektrik, etc.), and so far I'm liking the blackface for my cleans. My amp rig is a 6505 on an 212 orange cab with vintage 30s. I love my dirty tone from the amp, but I'm currently just using it as a power-amp to see what the HD can do. I find running it into the effect return on the head sounds much better than the instrument line in on the front.
-
Hello everyone, I am completely new to the Helix world but I have an important issue. Can somebody tell me if and if so how you can use a Helix to switch between amplifier channels on a PRS Archon 100 Watt amplifier? I would love to combine the channels with my presets with the touch of 1 button. Now I have to press both the external channel switcher and the Helix which causes timing problems because certain music requires instant switching. With kind regards, Ezra -
Hello there Spider V user. My problem: If I want to use the tab Switch to tab the delay time, it dosen´t work. Also if I use the swich on my FBV3. Is it an function, that can be disabled in the menu of the amp? Would like to get an answer quick, cause I use the feature very often. Regards, Andreas PS: The Spider App does work so bad and there is no Editor for PC. I hope the Line6 Team will change the missing things rapidly. It is so uncomfortable, using the amp at home without an PC editor. Also it would be helpfull, the USB Unit on the Spider can load the tab by using, cause it is impossible to use app and loading with a separat unit at the same time. -
Hi everyone.. I had a Line 6 Spider Valve 212, and when i plug in FBV2 footswitch its delay when i want to switch betwen chanels, and after that it changes randomly... I tried FBV2 on other Line 6 amp and it worked correct... Please help if you now something becouse i have some gig for about 10 days so i realy need help... Thanks...
-
My Helix is on the way!!! :) Does the helix "know" automatically what type of output it is plugged int to? I have a DT 25 that I practice with but when I play at church I plug directly into the mixer using xlr. Will the Helix automatically adjust the sounds based on what output I'm using? If not I'll need to duplicate every patch, 1 version for amped and 1 version for mixer.
-
Hello, I started this topic is this section because you don't have a section for my amp. I know my amp is a bogner but they told me that it was manufactured by line6 so I'm seeking help with you. When I connect my footswitch, sometimes the amp randomly changes channel. I have a friend that also has that amp and his started to randomly switching channels even with the footswitch connected. I believe this is a problem with the relay switching, maybe it gets overheated os something... Can you provide some kind of help? Thanks
-
Hey guys new to the forum here hoping you can help out. I have a weird situation with my pod hd500x that has me stumped. I have a patch set up with 2 of the same amp(one top of chain and one directly below it). What I have done is set it to where only one amp is active at a time with the press of a button. (what this is accomplishing for me is adjusting a preset gain on the amp in question by actually switching to a different amp) The problem I am having is once I switch one amp off I get the "dry" bleed through in my live mix. any ideas?? I have a gig this weekend and I would like to figure this out. cheers, shawn
-
Good morning, I have a variax guitar JTV59 model since 3 years and I notice that the switch/pickup selector has a problem. When I select down position I have no sound, I think it's broken. Pickup selector can be changed easily ? Does it need special assistance ? I'm in France and it's really difficult to find a Line6 specialize shop.
-
Hello all, I have had my HD500x for a little over a year. Love it, I use it only for FX and use my 5150 for amp sounds. Lately, my switch that is next to the tap switch, and sometimes the one to the left of that, will switch on the effect I have set up there. Doesn't matter which scene I have loaded, it will still do this. I have an idea of what it is, and two different fixes for it, what do you all think this is? I actually have video of my last band practice of it doing this if you want to see it fail. Has this happened to you guys? Is it common? What caused it and what do I do? Thanks :)
-
Hi all, I had a "plain-jane" Variax way back when (2004-5?) which I sold when I was saving for a house with my wife. I have been dying to try the new breed and decided to take the plunge on a beautiful, yet used, JTV-59. I didn't have time to mess around with it past making sure it made sounds before I brought it home from Guitar Center, but I may have found an issue that many on these boards may already be aware of. Serial no is W12030341 so I'm thinking it's March 2012 production, but I believe it has the pickup selector switch problem I've found archived here in the forums. The switch works flawlessly with the magnetic pickups, but when the models are on the switch does nothing. If I press the Alt Tuning Knob it seems to switch between models 1 and 2 of whichever bank I'm on. I was trying to get creative with my HD500x and simply control all the model changing with my feet but that is starting to eat up preset real estate an reduces spontaneity. At $699 plus tax this was a deal, but if I need to send it in for repairs I have to ask myself when the savings is no longer savings. I haven't decided yet so I thought I'd check out here for some feedback. Thanks! -
Hi! I have a problem in my HD500X with exp toe switch- he doesn't works... Please, help me! It's new, I bought it 2 weeks ago :(
-
Hello everyone. It has long had a multi-effect rack that commanded by a midi footswitch. This footswitch had the ability to select a preset with a switch, and if I could drive again move to the previous preset. This way, I could switch two preset with the same switch. Is this possible with the POD HD 500? Thank you very much from now. Sorry for my English.
-
Hi everyone! I happily joined the Line6 club recently and I am really surprised by the sounds I can get from my HD300 unit, but recently I started to have problems with the switches, nobody changed something in it hardware-wise, everything is factory-like. It's easier to show you in a video what's the problem so: I found out that by holding the A switch you enter in a button test mode "P16 TEST MODE", the screen shows "Knob ExtPdl" or "Knob IntPdl" and whatever I push it just jumps back at that and their value keep changing random. After a few days the problem got worse, now there are some LEDs that light up togheter with others, like the green tremolo light when the orange delay is on, and they sometimes flicker together with the tap LED. It's just like everything is short circuiting. I don't know if there is an authorized service in Romania so I could send them the unit.
-
Changing The Wiring On My Jtv-89
Inerzia posted a topic in James Tyler Variax Guitars / Workbench HD
I've been scratching my head for some time now trying to work out how the pickup switching works in my JTV-89, mainly because, although I like the pickups, I wanted to have more options on the magnetic side. I wanted something like what I would want on a HSH strat. That is: two 4conductor humbuckers with duncan triple shots and a single coil sized humbucker in the middle. The switch, as it is, doesn't give any option to add another pickup, because all four (well, five) conductors are soldered on a small PCB that's attached to the selector and it's impossible to see inside the selector to find some way to add anything or change any of the pickup/coil settings, so... I went and opened it. Well, I didn't exactly open the one inside my guitar, but a spare I got from the spanish distributor. The switch was failing and I didn't want to send the JTV to tech service because they are sluggish, so I asked them for a replacement switch and they sent it, on the condition that the guitar would be serviced at the store where I bought it. In fact, they did send the wrong switch the first time, so I ended up with two, one that seems to belong to a JTV-69 and the one I needed. I've been a customer for a long time, so the people at the store agreed to let me change it myself, which I never did, because once I bought a hardcase for the guitar, the switch stopped failing so often (It almost never fails now and I've worked out a way to quickly get it back to normal). So I opened the selector and found out how it works. It works in the same way a superswitch would, only this one is preset. There are fixed contacts and mobile ones. The fixed ones are printed in a way that does the coil splitting in positions 2 and 4 and does, well... you know... what a JTV-89 does with its mags :-) The switch is some kind of 2P5T, where on one pole you select the magnetic pickup setting and on the other you select modeling pickup setting. On the modeling side, the contacts are arranged in a standard fashion. Bad news first: The modeling side of the switch has three resistors (18,65k, 75,1k and 37,2k are the exact values, though they most likely correspond to standard values of 18k, 75k and 36k) and I'm guessing the variax brain detects which position the selector is on based on the resistance measured between the two contacts that go out the PCB. Good news: The values of those resistors are standard and they are possible to replicate, so you can use a standard two pole five throw blade selector and add another pickup (or whatever you want to do with your five) Better news: The lower PCB can be desoldered from the selector and soldered to a different one, so you don't have to mess around with resistor values and provide some new small board to solder them onto. PICTURES: YES!! I know I should include pictures in this very post, and at this very moment, but my camera is out of battery and my phone isn't good enough, so you'll have to wait, but the pics will come. I won't actually modify the guitar until the triple shots and the duckbucker are here, then I will have a friend route the guitar for me and then I will do the electronics so, for now, the only pics I'll post are the ones of the selectors. In a month or two (when I can buy the stuff) I'll start doing the mods- 4 replies
-
- 2
-
-
- tyler variax
- wiring
- (and 3 more)
