Search the Community
Showing results for tags 'ux2'.
-
So I would like to record my guitars sound coming from my amp straight into my computer. Obviously, this is why I'm using a UX2. Problem is, when I go from the "emulated headphones" output on the amp to the UX2 input, it seems that the UX2 does not process anything. The needles do not move at all, both at 0. I have tried both PAD an NORMAL inputs. It picks up when I use my guitar directly into the UX2. The amp works on its own, it is just this connection between the amp and UX2. Any ideas? -
Hi there, I bought back in 2013 an UX2 Audio Interface, and until then, everything was working perfectly. Today I plugged the USB cable into my computer and these two red dots went on and off indefinitely... I tried other USB ports on my computer, desinstalling/reinstalling drivers, monkey, license manager, etc...Nothing does. I get this error code with LINE 6 MONKEY : "There was an error communicating with your device. If it is a USB device, try disconnecting then reconnecting the USB cable. Error: (Code 80007103) Failed read from firmware." Of course, disconnecting and reconnecting the USB cable doesn't solve the problem... If anyone can help me out with this issue, I will be soooo grateful Here are my specs : Windows 8.1 LINE 6 POD UX2 Studio audio interface Intel Core i5-4440 CPU @ 3.10GHz 8.00 Go RAM x64 bits system (please, excuse my english spelling) Thank you in advance :) -
Hello friends I'm new here and I don't know whether I write in right topic or not I have a UX2 interface for 3 years and I have some problems with it. I use it for arranging music Sometimes when I use some VSTs, audio drops and after closing and reopening DAW (cubase or sonar), it can't detect ASIO UX2 and I must restart computer Other problem is that many times when I unplug and plug its USB, windows freezes and I must reset it. why unpluging interface must cause problems? I update my drivers via line 6 monkey Must I change my interface? This is my computer's features: CPU: Core i5 4440 RAM: 4*4 (16) GB Motherboard: Asus H97 Pro Windows 7 x64 Thanks -
Hello! Kind of an odd problem I'm having that I can't figure out for the life of me... Recently, after I had plugged my webcam back in to my PC, my webcam has been giving me troubles with my audio. Periodically when my webcam is on, my audio recording will just stop. The needle on my UX2 will freeze in place, no input will be going through on POD Farm, it just stops. The only way to get it back is to wait a few minutes or close then reopen POD Farm. My webcam mic is disabled so I know it's not that. I thought it was a Skype issue but then it happened again with Hangouts. I even tried using my mic without POD Farm on but it still stopped recording eventually (I was talking to friends on Teamspeak). Any ideas? Thanks! -Brett
-
Hello, my Line 6 UX2 has suddenly stopped working. I had had intermittent problems with it but it worked fine for a week or so, and suddenly stopped receiving any input from any of my guitars, all of which are working perfectly with my amplifier. If I set up my UX2 as a default playback device in the Windows mixer and play audio, the needle moves but all I hear through the UX2s headphone jack is a high pitched whine. I have tried uninstalling and reinstalling Pod Farm 2, the latest drivers, and toggling settings in the Windows mixer. I have also tried the device on multiple computers, my two desktops and my laptop, all running Windows 10. Line 6 license manager authorises the UX2 and my computers fine. I have tried setting different inputs in the Line 6 control panel applet but still, it is not working. Is there anything I can do? -
Hello, I have the POD Farm UX2. Whenever I open pod farm and go to "mixer view" and choose "Mic 1", there is no sound or anything detected from it. I checked the license manager and everything is authorized on my UX2 and computer. Is there anything I missed or can do to fix it? It worked fine previously on an old computer, now on a new one it does not. Everything worked fine previously on Windows 7, then after doing a fresh install for Windows 10 and downloading it, I am having issues. Extra Info & Screenshots: - Microphone being used: Audiotechnica AT2035 (I do have the +48V enabled) - Yes, all my drivers are updated according to L6 Monkey - Using Windows 10 - My UX2 is authorized in the license manager - I tried multiple USB slots and reinstalls with the same issue. Microphone not detected screenshot below Thanks for the help
-
Hello, I might be buying a Toneport UX2 used and was wondering. What doest the "monitor input" port do? I can't seem to find it anywhere on the web. Luke
-
Hey! I'm getting pretty mad right now. For quite a while now, my Alesis DM6 USB E-Drum kit has been crashing my Line6 Pod Studio UX2 and it's really annoying. I just play a bit and bam, all sound stops and the Level-meter-lights on my UX2 are off and I have to reconnect the thing. When I reconnect the UX2, Pod Farm doesn't work in REAPER and I have to reconnect the UX2 and restart REAPER several times until Pod Farm within REAPER works again. The only thing I have to do is to have my kit connected to my computer and be on and just hit on the pads a bit and eventually the UX2 will crash. I do not need to have Superior Drummer or REAPER running in order for the UX2 crash so it is obviously my kit and/or UX2 causing it. I have the latest UX2 drivers installed. Any solutions? -
Does the UX2 USB have to be plugged directly into the computer? I plugged it into a USB hub/multi ports, for over a year and it worked fine. Today i'm getting crazy static and high pitched frequencies which is affecting my guitar signal and other applications on my laptop. Thanks.
-
I like to play along to bands albums with my guitar through a UX2 while simultaneously listening to them on Itunes. I've noticed though, that If i don't have my UX2 settings just right (in terms of lowering the volume of the amps) the UX2 loudness will cause the ITUNES to completely stop. Actually, every other application that makes sound stops working. For instance when I get on ableton to play my guitar through a UX2 over a simple drum beat, the sound stops working on ableton. The only sound that does work is the guitar signal through the UX2. Is this because of my sound card?? Anybody know of a quick fix instead of rebooting/restarting the computer every time i do not calculate the volumes right?
-
So I been trying to get a decent tone through pod farm 2, but can't really decided how to improve it Pod farm 2 effects I use (also using +18 DB because it sound really quiet) Noise Gate Threshold -40DB Decay - 19% Compressor Threshold -7DB Gain - O DB A link to my latest commentary I use Audacity (not sure how to get Line 6 driver to work with it properly) and use a SE electronic 2200a II microphone If anyone could help with suggesting effect or programs, It would be very helpful
-
Hi! The problem is that my computer doesn't read "send 1-2" and "send 3-4" during recording dual tone (mic & instrument) on gearbox. I use line 6 ux2 and gear box, I've tried installing diffrend drivers but so far without resoults (In addition I can say that separetly mic and instrument work, but when i try record instr&mic my recording software record for example only instrument or vocal on one path) . Please help me I am being tried since for 3 days make it work ;/ -
After recently purchasing a POD UX2, I discovered a VERY unnerving issue. I use the latest driver and optimized my system for audio recording. System: Windows 8.1, Intel i7, 8GB RAM, 512 GB SSD. DAW: Ableton Live 9.1 When running the UX-2 as ASIO-device, every 30-60 seconds during playback / recording, Ableton Live 9 crackles while displaying "Initializing MIDI in- and outputs" for 5 seconds. During this, the mouse is not responding / Windows-being-busy-mouse symbol. Before using the UX-2, I used FOCUSRITE (Scarlett) and STEINBERG (UR-22) ASIO-interfaces on the same machine with the same configuration and NEVER encountered any problems like that. I use a NOVATION Impulse 49 as master keyboard / midi controller BUT it seemingly makes no difference if its plugged in or not. I always plug the UX 2 into the same USB 2-Port (no Hub!). Only use the original USB-Cable that came with the UX-2. Already tried disabling midi in the windows system settings / line 6 audio-driver settings as well as disabling any midi device in my DAW. Google search and Ableton forums for troubleshooting didn't give any results. This issue so annoying and I would be VERY grateful for a solution! CAN SOMEBODY PLEASE HELP?
-
I currently have a Toneport UX2 but I have a chance to get a good deal on a HD Pro X. Im just wondering will I get better tones out of the HD Pro or will it be the same tones just a different interface ? -
Hello, I recently purchased a Line6 UX2 and I just plugged in my casual headphones through a 1/4 inch adapter and I am receiving a static like noise in both of my ear cups but particularity the left ear cup. I was wondering if this is due to the 1/4 inch adapter or the UX2 is defective? Please let me know your ideas. Thank you.
-
Hello, I just bought my first audio interface today (the UX2) and initially I ran into problems with the installation. 1. I downloaded the Pod Farm 2.5 2. didn't plug the device 3. picked the UX2 driver in the installation instructions 4. I plugged it in after it instructed me to do so. 5. No driver installation window appeared. I checked Device Manager and I saw the UX2 in the Unknown Devices with an exclamation mark icon; the problem: drivers were not installed. 6. Uninstalled the software completely and searched these forums for about 30 mins. Someone mentioned in a post on a thread to install Line 6 Monkey first (I really can't find the link anymore :( ). 7. Did that. He couldn't find the device even though it was plugged. It reported that UX2 driver was not installed and other things: USB Firmware outdated and the pod farm software and others. 8. I clicked to update the UX2 driver. It installed and after a few seconds it miraculously worked (and it seemed it updated the USB firmware as well. And that's it, then basically you can install whatever you want. This might work for other Pod Studio devices as well.-
- 1
-
-
- windows 10
- ux2
- (and 1 more)
-
I've had my UX2 for about 6 years now and I use the UX2 as my default playback device and with headphones. Lately, I have been experiencing this annoying and constant throbbing sound. This occurs even without Pod Farm open, without anything but the USB cable plugged in, with the "Phones" input knob all the way off, and with my PC volume muted. When I move the UX2 certain directions or placements on my desk, the throbbing noise decreases temporarily, but usually comes back. I've tried 3 different headphones, I have tried uninstalling and reinstalling the drivers, and I have tried a Focusrite 2i4 so I don't know if it's just faulty hardware at this point, or something else. The throbbing doesn't pick up when recording, but it's super annoying.
-
My UX2 came in a few days ago. I got some decent Bose headphones with a 1/4 inch adapter so I could hook it up to the phones jack, and I noticed something strange. When I plug it in all the way there is no sound or it is at extremely low volume. I've checked knobs and settings and it doesn't make sense why it isn't working. But then, I noticed if I plug in the phones about 3/4 of the way in I can manage to hit a "sweet spot" where the sound actually comes in, but this is bothersome as it doesn't always like staying in place. EDIT: Resolved. It was just a crappy adapter.
-
Hello everybody, I was recording my guitar as usual with mi UX2 interface, and suddenly there was no sound entering in both lines entries. I was using a dynamic microphone to the interface, then I tried to change to the guitar directly and nothing changes. I actually updated POD Farm 2 with line 6 monkey to the latest version, but nothing happens. Does anybody had the same problem? There was no fall, no hit, no nothing! I was recording normally and suddenly there's no sound entering anymore. Help me please, I'm seriously thinking something happened inside both line entries. What is the next thing to do?? I'll be waiting for your comments!
-
I am trying to connect my old Line 6 product which I believe is the Tone Direct UX2 model to my new laptop. So far I am unable to get my computer to recognize my MIDI device. I keep getting an error message when I try to update my software that I need to log into my account and when I do I get a message that reads: Log in failed. Make sure you are connected to the internet. Reason: (Code 800038C6) Unknown server error occured. If you have popup blockers, anti-spyware, or anti-virus programs running, try temporarily disabling then. I am connected to the internet and do not any any blockers turned on. I would at least like to connect my MIDI device to my Reason Adapted software (which is also pretty old) or Reaper which I have downloaded so I can record my guitars and vocals on my computer. Any help is appreciated! -
I bought new line6 ux2 and I install drivers, license and authorized, and install pod farm2 My problem is 1. in farm2 signal is up and down when i play guitar 2. no output sound.... I check windows speaker setting... how can i fix it?
-
Hi all! This may be a silly question, but I've upgraded my hdd to an ssd and I have to format my pc to have the OS run through the ssd now. I also have a UX2 that came with a Pod farm 2 licence and so far everything works just fine. Do I need to do anything before I format my pc ? I mean will the licence be transfered automatically or do I have to unistall something before the format and re-install it afterwards? Thanks in advance!
-
So recently purchased my AT2035 and Line 6 UX2. While I have some knowledge of audio interfaces, I find myself a bit lost when it comes to my microphone's specific issue. I have found that the microphone levels are very low and even with a volume boost it sounds rather low quality. I have tested my mic with no presets and it sounds very quiet reaching only roughly around -25 db. I have also tested various presets and have found using the default studio vocal preset to be the best; a bit louder, but still very quiet. It may also be important to note that the Mic 1/L Gain is in this position: Below I have posted screenshots of my UX2 audio interface and have given a small audio sample. The first half of the audio file is with no pre-amps or effects added and the second half contains the default studio vocal preset. I still believe the mic to be too quiet and am at a loss as to what is causing this. Any help is greatly appreciated! Mic.mp3
-
I upgraded to windows 10 and was unable to get Pod Farm working properly with my mic and gave up. I decided to come back to the situation and when I opened up Pod Farm it told me that I needed to authorize my UX2 in order to run Pod Farm. I then run the licence manager and attempt to authorize, but it gives me an error code 80000002. Currently I am unable to exit out of Pod Farm and have to restart my PC in order to close it. Any suggestions on a fix here?
-
My Set Up: I use the ux2 and pod farm to pick up my mic (audio technica at2035) for talking with my friends or whatever else I would need a microphone for. I run it through pod farm so it has a much cleaner sound. When I updated to windows 10 I uninstalled all of my line 6/ pod farm stuff and recently upgraded to the windows 10 version. All drivers are up to date. I have my mic plugged into the first input with the phantom power on. My headset is not connected through my UX2 as I don't need to hear what I sound like. The dials on the UX2 do move when I talk into the mic. Issue: It seems my mic is being picked up in Pod Farm as I can see the audio indicators at the top moving and registering audio. However, inside my sounds and recording devices, there is absolutely no indication that my mic is registering. How do I get my computer to pick up my mic?
