Search the Community
Showing results for tags 'variax'.
-
I've seen in multiple threads and the manual that you should be able to change the variax model per snapshot; however, it only seems to allow it globally or per preset. Using "HX edit 2.6" (in the first image) you can see that there is an option for snapshot clicking on the camera in the upper right. But in the actual selection area (second image, right side), you only have the global and preset option, nothing on snapshots. I have a JTV59 I think it is, and am using the cat5 cable between it and the helix. Although this snapshot option should be visible independent of the variax. I didn't see anything in the release notes for HX edit that addresses it so I doubt upgrading will fix it. Has anyone else run into this or is there a work around? Thanks, Bobby
-
I finally found a great deal on a (not) scratch n dent V-Standard at SW, and after 2.2 days I'm starting to get blown away. Let me back up. I entered the modeling realm with an HD500 when they were fresh (what, 2010?), thinking that I'd have more capability than the Spider Valve MkI that amazed me. First thing I noticed on the POD was that all the stock presets sucked. Playing at very low volume, I had to develop my own, which relied on a fair bit more gain than I'd normally go for in order to achieve any kind of crunch. I moved from FRFR to DT amps, but still, always kinda had more gain than I wanted (except when I went totally clean with the lovely Twin model). I picked up a Variax 600 and finally reached "dream rig" status, but really only liked the Strat models, Tele neck, and the Rick bridge. The alt tunings seemed kinda crappy too. Most of the other electric models were just too loud--much louder and with more gain than my real guitars with hot pups. When I first tried my new V-Standard, it was looking like more of the same (except usable mags). So I wondered, how do I get away from my presets with too much gain and into presets that work for my Variax? In an epiphany of sorts, I started trying out all those presets in my HD500 that sucked, and guess what? NO MO SUCKY! They're amazing, for the most part. Also, to my surprise, they all have variax settings already. So all I had to do was plug my dream rig in, using an ethernet cable and the digital L-6 Link, and now folks, I hardly have to tweak, I can just play my heart out! Turns out those patches were very well crafted using Variaxes of some kind, and so far about 2/3 are keepers! Has anyone else noticed this as well, or am I the first to stumble on this total treasure chest? The magnetic pickups are pretty sweet too! But the other thing I'm really thrilling over is the neck on the Variax Standard. I was afraid that something this flat, this thin, and with medium frets might not work for my aging knuckles, but I gotta tell you that even with 10's at concert pitch this thing is a joy for my hand! It's the most comfortable neck I've felt since the Japanese Variax 700 I've been wishing I'd have bought--and that's saying a lot. I do have questions: Is the light on the alt tuning knob supposed to be only momentary (unless you go to the "model" position)? I wish the thing would stay lit in mag mode so I could dial up the tuning I want without activating all those other tunings in between. Does anybody know how hard it would be to change pick guards? I'm thinking white would look very sweet with my sunburst brown... THANKS!!! Mike
-
Version française. Deutsche Version. Every James Tyler Variax guitar includes the following accessories: One Workbench interface One USB cable One Category 5 Variax Digital Interface cable One Allen wrench tool set One battery (*US made JTV guitars are shipped with 2 batteries) One battery charger One battery charger power supply w/ international adapters Allen wrench sizes: (for JTV 89) 1 -“ 4mm hex, for truss rod adjust (relief) 1 -“ 5/64" hex, for individual piezo level intonation adjust (intonation) 1 -“ 7/64" hex, for bridge post adjust (action) 1 -“ 3/32" hex, common generic tool in most guitar tool kits 1 -“ 5/32" hex, common generic tool in most guitar tool kits 1 -“ 0.050", for bridge set screw horizontal overall Bridge intonation adjust (intonation) 1 - 1.5mm, for tremolo set screw [even though the 89 is a set bridge] 3/32 and 5/32 are common generic tool in most guitar tool kits that use linear, rather than metric parts. ==================================================================================== (for JTV 89F) 1 - 4mm hex, for truss rod adjust JTV-89F (relief) 1 - 5/64" hex, for individual piezo level intonation adjust (intonation) 1 - 7/64" hex, for Locking nut and bridge string locks 1 - 3/32" hex, common generic tool in most guitar tool kits ==================================================================================== (for JTV 59 and 69) 1 - 1.5mm hex, for tremolo set screw adjust on the JTV-69 series 1 - 4mm hex, for truss rod adjust JTV-69 (relief) 1 - 4mm hex short arm, for truss rod adjust JTV-59 (relief) 1 - 5/64" hex, for individual piezo level intonation adjust (intonation) 1 - 7/64" hex, for bridge post adjust (action) 1 - 3/32" hex, common generic tool in most guitar tool kits 1 - 0.050" hex, for bridge set screw horizontal overall Bridge intonation adjust (intonation) 3/32 is a common generic tool in most guitar tool kits that use linear, rather than metric parts. ==================================================================================== (for the Variax Standard) 1 - 4mm hex, for truss rod adjust (relief) 1- 1.5mm or 1.25mm hex (for earlier units), piezo saddle height adjust (action) ==================================================================================== (for the Shuriken) 1 - 4mm hex, for truss rod adjust (relief) 1- 0.050 inch hex, piezo saddle height adjust (action) If any of these items are missing from your new JTV purchase, feel free to submit a support ticket at line6.com/support. We will route your request to our Parts department for fulfillment. Les éléments suivants sont inclus avec tous les guitares James Tyler Variax : L’interface Workbench. Un câble USB. Un câble Cat 5 Variax Digital Interface. Un ensemble d’utiles Allen. Une batterie (les guitares de la série US ont 2 batteries). Un chargeur de batterie. Une alimentation pour le chargeur de batterie. Avec des adaptateurs internationales. Toutes les clés Allen : 1x 1,5mm 1x 4mm 1x 2mm 1x 2,8mm 1x 2,4mm 1x 1,3mm Si un de ces éléments manque, n'hésitez pas à soumettre un ticket de support sous : www.fr.line6.com/support Alle James Tyler Variax Gitarren beinhalten folgendes Zubehör: Die Workbench Interface. Ein USB Kabel. Ein Cat5 Varaix Digital Interface Kabel. Ein Set Inbusschlüssel. Eine Batterie (im Falle der US Serie sind 2 Batterien enthalten) Ein Batterieladegerät. Ein Netzteil für das Batterieladegerät. Inbusschlüsselgrößen: 1x 1,5mm 1x 4mm 1x 2mm 1x 2,8mm 1x 2,4mm 1x 1,3mm Sollte eines dieser Teile fehlen können Sie jederzeit ein Supportticket auf www.de.line6.com/support erstellen. -
Hello! I have the chance to buy a JTV-59 and I love the body style but I want to make sure that it has the same capabilities as the shuriken. Can anyone tell me if there are any differences other than body style?
-
Hi there. I´m a spanish musician playing several times a week in a cover band. Always have had Line 6 products, from the first POD model to HD500, Relay Wireless Systems... etc... Now I´ve sold my HD500 and bought a HELIX LT. I´m quite happy with it; good sound enough for giggin' and great flexibility to organize large setlists of songs with many changes and variations in gain and FX thanks to snapshots. My big problem is... I also have a Variax 500, wich I love, but I can´t see what to do now.. Old Variax models and Helix are not fully compatible. And.... there is no left handed models for the new variax range. I could put my Helix on sale and get an old HD 500 again, but it seems a lollipop solution, don't you think? I don´t want to give up to all my new bank of sounds (better than ever) and the "snapshots" flexibility. If Line 6 is not decided to create a lefty model for new Variax is OK to me, I´m fine with my old 500... but we need a solution for fixing this, and we need it soon, please. Is there any chance to create any sofware "patch" for the Workbench editor in order to connect with Helix? Or any special update for Lefty registered owners? Right handed people can update from Variax 500 to Standard, JTV or Shuriken.... but there´s nothing we can do so far.
-
A few days ago somebody smashed out my window out in AZ and stole all of my gear from my trunk. Now, being that I’m 17, I rely heavily on modeling products to cut down on costs, but I still won’t have the funds for years to replace any of the equipment that was stolen. The idiot was able to get away with my Helix, Powercab 112 Plus, JTV-89F, and a few other miscellaneous items, but I was wondering if there’s some warranty that can cover products that were bought not directly from Line 6? They were all bought used and from pawnshops. Also is there some form of security meaure that prevents the Helix from connecting to another Line 6 account or some form of lock out precaution? I ended up creating a GoFundMe in the meantime to help fund the replacement items, but so far no one wants to donate or share the link since I’m not a 5 year old cancer patient. I’ll include the link just in case of some miracle happens from the guitar world. Thanks in Advanced, JB
-
The Helix Hardware has good support for the Variax. Wondering if the software will integrate somehow with the Variax? I know the communication with the Variax is currently limited over USB, but because the VDI spec is closed we have no idea of what's possible using that or USB. FYI.. Here's my ideascale to build a stand-alone Variax interface that could be used along with Helix Native.
-
Hi! Wondering if anyone knows if a new input jack would fix this. Or if i should chase something else. Here is what happens: JTV89F -> VDI -> HELIX. Mags give extra hum until I touch the end shroud of the VDI cable. Either end will do it. JTV end or HELIX end. It hums like a single coil. Using my 69S through the same path and I do not have the same issue. No change whatsoever when touching an end of the cable so I am thinking that at least rules out other components in the chain. Thoughts?
-
While creating the Variax sample reference, I was reminded of a major, and often overlooked advantage of the Variax. My house suffers from a lot of electrical noise and the use of single coil pickups is a no go for me. Having the option to coil tap humbuckers is a complete waste of time for me. The answer is the Variax. Now I can get the tones I want with no noise. Yes, I can use filters to remove most of the noise, but at the cost of the tone. I can use a noise gate, but that only gets rid of the noise between notes and does nothing to remove the noise that overlays the guitar’s sound. The answer is the Variax. What would be great is if the Variax technology was licensed to manufacturers, to model the coil tapped sound of particular pickups and have that switched in when coil tapped.
-
Would it be possible to add a new modern pickup model or two, to the Variax software/firmware, to bring it in line with Shuriken's modern good looks? I'm sure JTV owners probably wouldn't mind this either. I know a lot of folks like EMGs, Bare Knuckle, Fishman, DiMarzio, etc. I'm sure people have lots of opinions on which they'd wish for most. Would love to know how people feel about this one. -
I installed some Grover 406c locking tuners and a GFX X-Trem tremolo on my JTV-59. Special thanks to Christian at www.townerusa.com for selling me his Bigsby V.Block spacer and straplock extender, which was needed to move the X-Trem back from the bridge... The V.Block fit perfectly, but the straplock extender was just a bit too long to fit inside the X-Trem so I used a dremel tool to lengthen the staplock hole on the X-Trem.
-
I have a Variax 300 and a Helix. Can anyone tell me if the Helix is capable of saving the guitar and the 5 way toggle setting when I make a patch that I like. I would like to know if there is a way when recalling that patch that it will automatically go to the guitar and the 5 way setting I was at no matter if my selector and 5 way are set to something totally different. I would really appreciate some help on this. Thanks in advance, Rocco
-
I have not seen this posted on the forum, so I thought I would post it. I wondered how long it would take to charge a battery from dead to when the red light flashes. I just timed it at 3.5 hours. (give or take a few minutes!) For any of our international members, this was on a 110 volt ac outlet.
-
For anyone who is unsure of whether you can use the legacy Variax guitars under Windows 10, I can confirm that you can. I went to the download section and just selected Windows 8 as the OS and downloaded Line 6 Monkey and Workbench (non HD version), ran the installers, hooked up my Variax USB Interface and Variax 500 and everything worked perfectly first time. I had no issues with Java or the installation on the drivers. This statement is valid as of April 2018- 10 replies
-
- 1
-
-
- variax
- variax 500
- (and 2 more)
-
Anyone know how to save alternate tunings from the models knob to the tuning knob from Workbench HD? I can only find instructions on how to do it directly on the guitar. I have several tunings applied to models that I want to transfer to work globally. I've named and saved them in the Manage dialog box, but can't find any way to save them to the tuning knob. I could save them manually, but I'd like to know for future models. (I hope I've made this understandable) Another thing: Is there a way to view what's programmed into the alt tuning knob?
-
Why is Variax + Helix changing to the wrong models in snap shots?
MarkJarvis posted a topic in Helix
Why is Variax + Helix changing to the wrong models in snap shots? So i painfully went and programmed each snap shot with a specific model I want to use..so far great..I go to use them and it seems that touching tone or volume (not sure which) is causing the models to change in the snap shots..I set Custom -1 and later its some random instrument like Lester or spank or whatever. i checked Helix editor and only assign is model via snap shots (in brackets) and tone and volume all say 'dont force' If i lock out the tone knob in the editor the models stay put...not sure where this is not working or if its a bug.. I need my tone knob so thats not an option -
The electronics in my out of warranty JTV59 are dead. Has anyone gone thru the process of getting a Variax guitar repaired in Canada? Are parts available? It probably needs a new main board, something I could easily install myself.
-
I am trying to update my JTV 89 F using my Helix as the interface through line 6 monkey. I have both the line 6 cable and the quarter inch jack connected to the guitar. Every time I try to update the firmware from 2.21 to 2.23 I am getting the following 2 errors (screenshot attached). Can anyone help on how I can get over this issue? ryi -
This may sound like a weird question, but does anybody know if it is possible to use non-standard strings on a Variax 500? By non-standard I mean replacing the normal wound strings with duplicates of the G string. The idea being easier bends and less string/finger noise on the E A and D strings. I know on a regular guitar there would be a problem with volume from the magnetic pickups, but would this be a problem with piezo pickups? Also would it cause a problem with intonation or neck relief.
-
I just wanted to share some of my experiences (and frustrations) when using the JTV. I have done some tweaking in workbench and the guitar is now a dream; if you spend some time with this guitar it really is a work of genius and incredibly playable/musical. Here is what I did: Set each presets' string volume: I did this not using the global string volume but the string tab for each preset. It took some time but it was worth it. Prior to doing this I found on many of the presets some of the strings were thin and others were too 'present'. In many cases the string volumes were out by a significant degree eg 50 50 50 100 80 100. In most cases I found my top E string was the quietest and weakest sounding in each preset. It seems strange that the individual string volumes were so far out, you think they would nail this in the factory! I then boosted the preset volume by between 3-6db for to compensate for string volume reductions I also - in also most every preset - increased the pickup level by between 3-6 db for each preset pick up. I tried to get the levels roughly the same between presets, as for me I find this much more musical - prior to doing my level tweaking I found the models with lower volume less appealing. Now I have levelled each preset out some of my favourite models are the ones that I 'skipped' prior to the above. If you are not happy with your JTV I would strongly suggest doing some of the above. I was about to get rid of my JTV but now I absolutely love it and can't put it down. The models shine through much better now and there is no longer the frustration of playing 'thin sounding' strings on many of the models. I now need to find a decent amp for the guitar - currently i'm using headphones, but previously I have played it through 'normal amps' and been v disappointed. I haven't tried it through an amp since doing my volume/pick up tweaking so it might sound alright now. Has anyone got any suggestions for amplification? -
For anyone who is interested I have created a webpage that allows you to listen to a simple sample from each of the modeled guitars in the default Factory selection. Simply click the icon of the guitar, or the play icon to hear the sample. The samples are recorded straight to my DAW and a small amount of reverb has been added. http://www.ccjmusic.com/line6-variax-models.php This page is an extension of the reference by Luis as found at https://freeshell.de/~luis/guitars/Variax 500.pdf so thanks goes to Luis for the hard work. I hope you find it helpful Colin
-
When I got my Variax Shuriken guitar, I had to arrange the external wah-wah pedal with my PODXTLIVE. By doing that, the sound coming out when using the wah-wah pedal is completely different. Originally the connection was Guitar "in" to wah-wah pedal "out" from wah-wah to "input" POD pedal and "output" to the Amp. Now with the Shurikan-Variax connected (network cable) to the POD pedal I have to use "output" from the POD "in" to wah-wah pedal "out" from wah-wah to the Amp. That make's differents in loudness (is louder), and the movement of the foot (up & down) has to be minimal, otherwise, notes are almost muted. Is there any way to somehow make this signal flow better; or do I have to get used to it that way? -
I just bought a used Vetta version 1. I bought it sight unseen with the longboard for a really good price. I really hoped that it already had the VDI expansion card installed, but alas.... it did not. Of course, I have had no luck sourcing one. I turn, in desperation to you all. Where can I find a VDI Expansion card for my Vetta. I have been reading about a lot of "dead" Vettas. I'd love to pick up a VDI card from someone who pulled it out of their old Vetta. Scott
-
Anyone ever ran into this problem? My high E string won't make a noise in modeling mode. It seems to play totally fine if I'm just running a regular amp setup except for some background feedback that is slightly irritating. As a way of background: A little over a year ago I bought a JTV-59P Variax and really liked it. I also bought the HD500X and the special cord to connect the two. I played on it for a few months. Keep in mind, I'm just play at home so none of this equipment went through any harsh anythings. Then I had to put it all on hold for a while due to school and work (while = 8 months) at which point this sucker was just in storage. Today I excitedly whipped it out. I had purchased the vintage HD download and so I connected everything, made sure it was all up to date, and started to play. Quickly I realized that the high E might as well not be on there in modeling modes. I checked the HD workbench and none of the string volume settings helped. I also turned off the modeling effects and it played with plenty of volume, but the moment I turn on modelling - NOTHING. Any ideas? -
Hi Everyone..been awhile since I posted ...here is SuMo (supermassivemomentum) newest live session. Recorded live over the internet from remote locations, Mastered at 96k. Experimental progressive improvisation, lots of guitar and bass craziness..heavy, grooving.. I use HELIX (2.54) and Variax.....powerful ! have a listen! Comments welcome https://hearthis.at/joejeffries/sumo-2018-5-11/
