Search the Community
Showing results for tags '3.72'.
Found 1 result
This release of Gearbox Standalone adds support for Windows 7 and Mac OSX 10.6. GearBox Plug-In Support does not apply, please see the following knowledge base article for more details: Gearbox Plug-in Effect: Discontinued New features/changes/fixes in this release: The currently released drivers and Line 6 Monkey with Windows 7 and Snow Leopard support are bundled with this GearBox package. A minor bug which could cause the tonedirect volume to be set to 0 with some patches was fixed. You can download the latest Gearbox release at: http://line6.com/software/ System Requirements: WINDOWS® Pentium® 4, 1.2GHz or better (2.5Ghz or higher recommended) Windows® XP® (with SP2 or better) or Windows® Vista® (32 bit and 64 bit versions are supported) 512MB RAM minimum (1GB or more recommended) 1GB free HD space minimum (10GB or more recommended for recording) USB 1.1 or 2.0 port on computer for connecting Line 6 hardware (USB 2.0 port is required for TonePort UX8 and POD X3 family devices) Internet connection required for activation (once activated, Internet connection is not required, except for access to optional Guitar Port Online membership service). Host application that supports RTAS* or VST Plug-ins (for optional GearBox RTAS/VST Plug-In) MACINTOSH® Intel® or Power PC® based G4 1.5GHz or better (G4 1.67 or better recommended) OS X 10.4 or better 512MB RAM minimum (1GB or more recommended) 1GB free HD space minimum (10GB or more recommended for recording) USB 1.1 or 2.0 port on computer for connecting Line 6 hardware (USB 2.0 port is required for TonePort UX8 and POD X3 family devices) Internet connection required for activation (once activated, Internet connection is not required, except for access to optional Guitar Port Online membership service). Host application that supports RTAS* or AU Plug-ins (for optional GearBox RTAS/AU Plug-In) Known Issues: Master and Record section controls of GearBox app stay active in Tuner mode. They will have no audible effect in Tuner mode, but the application will re-sync all parameters when exiting Tuner mode. GearBox will not always save the correct amp model and/or settings when transferring to an X3 unit. The work-around at this point is to edit a parameter (i.e. move the volume knob up and then back to the original position), and then the tone will store/transfer correctly. GearBox Player will not playback .m4a files. You will need to convert them into .mp3 files. Changing Variax models during ‘Tone Transfer’™ with GearBox can cause MIDI device timeout error- please allow Tone Transfer to complete before changing Variax models. GearBox vocal presets default POD X3 input to guitar instead of mic due to them being created prior to POD X3 hardware - the input can be changed once the tone is loaded. GearBox application does not prompt save on application exit - users must remember to save changed tones before exiting the application. GearBox application defaults to Variax Electric panel. If an acoustic or bass is connected, please select the proper Variax type manually to sync software to the attached Variax. Rapid switching of Variax via 5 way selector switch on the guitar can cause the application to fall out of sync with the currently selected Variax model. Tones can get out of sync between POD X3 and Gearbox when doing special case tone selection. This includes tone swap, Lock Tone loading, and choosing to only load Tone 1 or Tone 2 of a patch from the X3 hardware. Please use the GearBox software to choose tones, or double click a different tone in the editor to resync the app and hardware. Gearbox reverts back to American Punk preset upon new launch if last tone is not saved before closing the application. Mac® OS X Exclusive Issues Typing in GuitarPort Online text fields causes system alert sounds. Player cannot open mono audio files. Drive knob redraw in GearBox can be sluggish when controlling Drive from X3 hardware. Turning the knob in GearBox software does not result in sluggish response, only from hardware.