Search the Community
Showing results for tags 'fx return'.
Found 3 results
I usually run my HD500 to my amp via FX Return out to the Return input on my amp head. Has worked fine for a while and now my HD500 FX Return stopped working. I get no signal at all. I can get the unit to work when I run from the Phones jack but that is a temporary fix. I've seen mention of checking the FX Loop setting. Should send and return both say 100% as well as mix? I just want to find this and fix it before I waste time finding a tech and find out it's not a jack issue but when I did an update a setting got changed.
Hi all. Can anyone guide me on how to use a Rocktron Banshee talk box with a POD HD500x? I can't seem to get any sound out of it by connecting the "IN" to the "FX Send" I don't need the return connected do I? All I need is the sound to get to the box then the microphone will take it from there. What am I doing wrong that is preventing any sound making it to the Banshee? Anybody got any ideas or suggestions? Thanks in advance!
Hi all, Until now I used my helix through the FX return from a Lab L9 (solid state). Sounds great and works fine. However, if I connect the helix with my JCM900 in the same fashion, it does not make any sound, regardless how much I crank up the volume. Also, if I connect my guitar to the FX return of the JCM directly, there is no sound at all. If I connect the guitar to the regular input channels A or B, all works fine, so amp itself is ok. But when I connect the helix to either channel I need to crank up the volume considerably before it becomes audible and then also sounds mudded. Questions: - I would prefer using the FX return from the JCM as i do with the Lab L9. Is that doable? If so, how do I need to do that (if that is different than with the Lab L9)? - Do I need to increase the output signal from the helix? If so, how do I need to do that? - Do I need to increase sensitivity of the FX return? If so, how do I need to do that? - Or is it likely that the FX return from the JCM900 is broken, since I do not seem to get any sound from it even when directly connecting my guitar? NB I prefer not to use a 4cm method as I do not intend to use the pre-amps from the JCM. Thanks for your suggestions. Eric